arXiv subjects

Sascha Keller

Publications and source records attributed to Sascha Keller.

8 recordsLinked to original sources

arXiv2023

Spin transport and magnetic proximity effect in CoFeB/normal metal/Pt trilayers

We present a study of the damping and spin pumping properties of CoFeB/X/Pt systems with $\rm X=Al,Cr$ and $\rm Ta$. We show that the total damping of the CoFeB/Pt systems is strongly reduced when an interlayer is introduced independently of the material. Using a model that considers spin relaxation, we identify the origin of this contribution in the magnetically polarized Pt formed by the magnetic proximity effect (MPE), which is suppressed by the introduction of the interlayer. The induced ferromagnetic order in the Pt layer is confirmed by transverse magneto-optical Kerr spectroscopy at the M$_{2,3}$ and N$_7$ absorption edges as an element-sensitive probe. We discuss the impact of the MPE on parameter extraction in the spin transport model.

cond-mat.mtrl-sci↗

arXiv2019

Modification of spintronic terahertz emitter performance through defect engineering

Spintronic ferromagnetic/non-magnetic heterostructures are novel sources for the generation of THz radiation based on spin-to-charge conversion in the layers. The key technological and scientific challenge of THz spintronic emitters is to increase their intensity and frequency bandwidth. Our work reveals the factors to engineer spintronic Terahertz generation by introducing the scattering lifetime and the interface transmission for spin polarized, non-equilibrium electrons. We clarify the influence of the electron-defect scattering lifetime on the spectral shape and the interface transmission on the THz amplitude, and how this is linked to structural defects of bilayer emitters. The results of our study define a roadmap of the properties of emitted as well as detected THz-pulse shapes and spectra that is essential for future applications of metallic spintronic THz emitters.

cond-mat.mes-hall↗

arXiv2018

Separation of the two-magnon scattering contribution to damping for the determination of the spin mixing conductance

We present angle dependent measurements of the damping properties of epitaxial Fe layers with MgO, Al and Pt capping layers. Based on the preferential distribution of lattice defects following the crystal symmetry, we make use of a model of the defect density to separate the contribution of two-magnon scattering to the damping from the isotropic contribution originating in the spin pumping effect, the viscous Gilbert damping and the magnetic proximity effect. The separation of the two-magnon contribution, which depends strongly on the defect density, allows for the measurement of a value of the effective spin mixing conductance which is closer to the value exclusively due to spin pumping. The influence of the defect density for bilayers systems due to the different capping layers and to the unavoidable spread in defect density from sample to sample is thus removed. This shows the potential of studying spin pumping phenomena in fully ordered systems in which this separation is possible, contrary to polycrystalline or amorphous metallic thin films.

cond-mat.mtrl-sci↗

arXiv2018

Efficient Terahertz Generation Using Fe/Pt Spintronic Emitters Pumped at Different Wavelengths

Recent studies in spintronics have highlighted ultrathin magnetic metallic multilayers as a novel and very promising class of broadband terahertz radiation sources. Such spintronic multilayers consist of ferromagnetic (FM) and non-magnetic (NM) thin films. When triggered by ultrafast laser pulses, they generate pulsed THz radiation due to the inverse spin-Hall effect, a mechanism that converts optically driven spin currents from the magnetized FM layer into transient transverse charge currents in the NM layer, resulting in THz emission. As THz emitters, FM/NM multilayers have been intensively investigated so far only at 800-nm excitation wavelength using femtosecond Ti:sapphire lasers. In this work, we demonstrate that an optimized spintronic bilayer structure of 2-nm Fe and 3-nm Pt grown on 500 μm MgO substrate is just as effective as a THz radiation source when excited either at λ = 800 nm or at λ = 1550 nm by ultrafast laser pulses from a fs fiber laser (pulse width close to 100 fs, repetition rate around 100 MHz). Even with low incident power levels, the Fe/Pt spintronic emitter exhibits efficient generation of THz radiation at both excitation wavelengths. The efficient THz emitter operation at 1550 nm facilitates the integration of such spintronic emitters in THz systems driven by relatively low cost and compact fs fiber lasers without the need for frequency conversion.

physics.app-ph↗

arXiv2018

Determination of the spin Hall angle in single-crystalline Pt films from spin pumping experiments

We report on the determination of the spin Hall angle and the identification of the role of the interface roughness for the inverse spin Hall effect (ISHE) in ultra-clean, defect-reduced epitaxial Pt films. By applying vector network analyzer ferromagnetic resonance spectroscopy to a series of single crystalline Fe (12 nm) /Pt (t$_\text{Pt}$) bilayers we determine the real part of the spin mixing conductance $(4.4\:\pm\:0.2)\cdot 10^{19}\: $m$^{-2}$ and reveal a very small spin diffusion length in the epitaxial Pt $(1.1\:\pm\:0.1)$ nm film. We investigate the spin pumping and ISHE in a stripe microstucture excited by a microwave coplanar waveguide (CPW) antenna. By using their different angular dependencies, we distinguish between spin rectification effects and the inverse spin Hall effect. The relatively large value of the spin Hall angle $(5.7 \pm 1.4)\: \% $ hints that interface engineering by epitaxially grown non-magnetic materials can increase the spin-to-charge current conversion efficiency.

cond-mat.mes-hall↗

arXiv2018

Optimized Spintronic Terahertz Emitters Based on Epitaxial Grown Fe/Pt Layer Structures

We report on generation of pulsed broadband terahertz radiation utilizing the inverse spin Hall effect in Fe/Pt bilayers on MgO and sapphire substrates. The emitter was optimized with respect to layer thickness, growth parameters, substrates and geometrical arrangement. The experimentally determined optimum layer thicknesses were in qualitative agreement with simulations of the spin current induced in the ferromagnetic layer. Our model takes into account generation of spin polarization, spin diffusion and accumulation in Fe and Pt and electrical as well as optical properties of the bilayer samples. Using the device in a counterintuitive orientation a Si lens was attached to increase the collection efficiency of the emitter. The optimized emitter provided a bandwidth of up to 8 THz which was mainly limited by the low-temperature-grown GaAs (LT-GaAS) photoconductive antenna used as detector and the pulse length of the pump laser. The THz pulse length was as short as 220 fs for a sub 100 fs pulse length of the 800 nm pump laser. Average pump powers as low as 25 mW (at a repetition rate of 75 MHz) have been used for terahertz generation. This and the general performance make the spintronic terahertz emitter compatible with established emitters based on nonlinear generation methods.

physics.app-ph↗

arXiv2017

Spin-pumping through a varying-thickness MgO interlayer in Fe/Pt system

The spin-pumping mechanism is probed through a tunnelling MgO interlayer in Fe/Pt bilayers. We show by ferromagnetic resonance technique and spin-pumping experiments that spin currents can tunnel through the MgO interlayer for thickness up to 2~{nm} and can produce significant voltages in the Pt layer. The electrical detection of spin-pumping furthermore reveals the critical role of rectification and shunting effects on the generated voltages. The non zero spin current transport through a few monolayers of an insulating interlayer might initiate further studies on the role of very thin oxides in spin-pumping experiments.

cond-mat.mes-hall↗

arXiv2017

Relative weight of the inverse spin Hall and spin rectification effects for metallic Py,Fe/Pt and insulating YIG/Pt bilayers estimated by angular dependent spin pumping measurements

We quantify the relative weight of inverse spin Hall and spin rectification effects occurring in RF-sputtered polycrystalline permalloy, molecular beam epitaxy-grown epitaxial iron and liquid phase epitaxy-grown yttrium-iron-garnet bilayer systems with different capping materials. To distinguish the spin rectification signal from the inverse spin Hall voltage the external magnetic field is rotated in-plane to take advantage of the different angular dependencies of the prevailing effects. We prove that in permalloy anisotropic magnetoresistance is the dominant source for spin rectification while in epitaxial iron the anomalous Hall effect has an also comparable strength. The rectification in yttrium-iron-garnet/platinum bilayers reveals an angular dependence imitating the one seen for anisotropic magnetoresistance caused by spin Hall magnetoresistance.

cond-mat.mes-hall↗