arXiv subjects

Satoshi Iwamoto

Publications and source records attributed to Satoshi Iwamoto.

At least 37 records · Page 2Linked to original sources

arXiv2024

Topological Laser in Anomalous Quadrupole Topological Phases

Topological photonics shows considerable promise in revolutionizing photonic devices through the use of topological phases, leading to innovations like topological lasers that enhance light control. One of recent breakthroughs is reducing the size of these systems by utilizing lower-dimensional boundary states, notably via higher-order topological phases. This paper presents the first experimental demonstration of topological laser in anomalous quadrupole topological phase, an instance of higher-order phases. To facilitate this, a topological nanocavity with quality factor near 6,000 is engineered through a twisting operation. The topological nature of our system is validated by calculation of nested Wannier center and the emergency condition of corner states. Our experimental observations reveal the manifestation of corner states and the achievement of single-mode pulsed laser, driven by optical gain from multiple quantum wells at telecommunication wavelengths and at a temperature of 4 K. A lasing threshold of 23 uW and a cold quality factor of 1,500 are deduce through rate equation. Our work gives a new potential in the application of topological principles to advance nanophotonic technologies.

physics.optics↗

arXiv2024

Wide-mode-area slow light waveguides in valley photonic crystal heterostructures

We designed slow-light waveguides with a wide mode area based on slab-type valley photonic crystal (VPhC) heterostructures which are composed of a graphene-like PhC sandwiched by two topologically distinct VPhCs. The group velocity of the topological guided mode hosted in a VPhC heterostructure can be slowed down by shifting the VPhC lattice toward the graphene-like PhC at the domain interfaces. Simultaneously, the mode width of the slow-light topological guided mode can be widened by increasing the size of the graphene-like PhC domain. We found that employing the graphene-like structure at the center domain is crucial for realizing a topological single-guided mode in such heterostructures. Furthermore, the impact of random fluctuations in air-hole size in the graphene-like domain was numerically investigated. Our simulation results demonstrate that the transmittance for the slow-light states can be kept high as far as the size fluctuation is small although it drops faster than that for fast-light states when the disorder level increases. The designed wide-mode-area slow-light waveguides are based on hole-based PhCs, offering novel on-chip applications of topological waveguides.

physics.optics↗

arXiv2023

Efficient light couplers to topological slow light waveguides in valley photonic crystals

We numerically and experimentally demonstrate efficient light couplers between topological slow light waveguides in valley photonic crystals (VPhCs) and wire waveguides. By numerical simulations, we obtained a high coupling efficiency of -0.84 dB/coupler on average in the slow light regime of a group index ng = 10 - 30. Experimentally, we fabricated the couplers in a Si slab and measured the transmitted power of the devices. We realized a high coupling efficiency of approximately -1.2 dB/coupler in the slow light region of ng = 10 - 30, which is close to the result from the numerical simulations. These demonstrations will lay the groundwork for low-loss photonic integrated circuits using topological slow light waveguides.

physics.optics↗

arXiv2023

High-Q two-dimensional photonic crystal nanocavity on glass with an upper glass thin film

We numerically analyze two-dimensional photonic crystal (PhC) nanocavities on glass with a thin glass film on top of the structure. We investigated a multi-step heterostructure GaAs PhC nanocavity located on glass. We found that covering the structure even with a very-thin glass film efficiently suppresses unwanted polarization mode conversion occurring due to the asymmetric refractive index environment around the PhC. We also uncovered that the glass-covered structure can exhibit a higher Q factor than that observed in the structure symmetrically cladded with thick glass. We point out that the mode mismatch between the PhC nanocavity and modes in the upper glass film largely contributed to the observed Q-factor enhancement. These observations were further analyzed through the comparison among different types of on-glass PhC nanocavites covered with thin glass films. We also discuss that the in-plane structure of the upper glass film is important for additionally enhancing Q factor of the nanocavity.

physics.optics↗

arXiv2023

Nonadiabatic nonlinear non-Hermitian quantized pumping

We analyze a quantized pumping in a nonlinear non-Hermitian photonic system with nonadiabatic driving. The photonic system is made of a waveguide array, where the distances between adjacent waveguides are modulated. It is described by the Su-Schrieffer-Heeger model together with a saturated nonlinear gain term and a linear loss term. A topological interface state between the topological and trivial phases is stabilized by the combination of a saturated nonlinear gain term and a linear loss term. We study the pumping of the topological interface state. We define the transfer-speed ratio $ω/Ω$ by the ratio of the pumping speed $% ω$ of the center of mass of the wave packet to the driving speed $ Ω$ of the topological interface. It is quantized as $ω/Ω=1$ in the adiabatic limit. It remains to be quantized for slow driving even in the nonadiabatic regime, which is a nonadiabatic quantized pump. On the other hand, there is almost no pump for fast driving. We find a transition in pumping as a function of the driving speed.

cond-mat.mes-hall↗

arXiv2023

Microwave hinge states in a simple-cubic-lattice photonic crystal insulator

We numerically and experimentally demonstrated a higher-order topological state in a three-dimensional (3D) photonic crystal (PhC) with a complete photonic bandgap. Two types of cubic lattices were designed with different topological invariants, which were theoretically and numerically confirmed by the finite difference of their Zak phases. Topological boundary states in the two-dimensional interfaces and hinge states in the one-dimensional corners were formed according to the higher-order of bulk-boundary correspondence. Microwave measurements of the fabricated 3D PhC containing two boundaries and one corner showed a localized intensity, which confirmed the boundary and hinge states.

cond-mat.mes-hall↗

arXiv2023

Valley photonic crystal waveguides fabricated with CMOS-compatible process

Valley photonic crystal (VPhC) waveguides have attracted much attention because of their ability to enable robust light propagation against sharp bends. However, their demonstration using a complementary metal-oxide-semiconductor (CMOS)-compatible process suitable for mass production has not yet been reported at the telecom wavelengths. Here, by tailoring the photomask to suppress the optical proximity effect, VPhC patterns comprising equilateral triangular holes were successfully fabricated using photolithography. We optically characterized the fabricated VPhC devices using microscopic optics with near-infrared imaging. For comparison, we also fabricated and characterized line-defect W1 PhC waveguides, in which the transmission intensities decreased at some regions within the operating bandwidth when sharp turns were introduced into the waveguide. In contrast, the developed VPhC waveguides can robustly propagate light around the C-band telecommunication wavelengths, even in the presence of sharp bends. Our results highlight the potential of VPhC waveguides as an interconnection technology in silicon topological photonic integrated circuits.

physics.optics↗

arXiv2023

Numerical Analysis of Photon Absorption of Gate-defined Quantum Dots Embedded in Asymmetric Bull's-eye Optical Cavities

Improving the photon-spin conversion efficiency without polarization dependence is a major challenge in realizing quantum interfaces gate-defined quantum dots (QDs) for polarization-encoded photonic quantum network systems. Previously, we reported the design of an air-bridge bull's-eye cavity that enhances the photon absorption efficiency of an embedded gate-defined QD regardless of the photon polarization. Here, we numerically demonstrate that a further 1.6 times improvement in efficiency is possible by simply adjusting the distance of the substrate from the semiconductor slab where the bull's-eye structure is formed. Our analysis clarifies that the upward-preferred coupling and narrow far-field emission pattern realized by substrate-induced asymmetry enable the improvement.

physics.optics↗

arXiv2022

Supersymmetric non-Hermitian topological interface laser

We investigate laser emission at the interface of a topological and trivial phases with loss and gain. The system is described by a Su-Schrieffer-Heeger model with site-dependent hopping parameters. We study numerically and analytically the interface states. The ground state is described by the Jackiw-Rebbi mode with a pure imaginary energy, reflecting the non-Hermiticity of the system. It is strictly localized only at the A sites. We also find a series of analytic solutions of excited states based on SUSY quantum mechanics, where the A and B sites of the bipartite lattice form SUSY partners. We then study the system containing loss and gain with saturation. The Jackiw-Rebbi mode is extended to a nonlinear theory, where B sites are also excited. The relative phases between A and B sites are fixed, and hence it will serve as a large area coherent laser.

cond-mat.mes-hall↗

arXiv2022

Topologically-protected single-photon sources with topological slow light photonic crystal waveguides

Slow light waveguides are advantageous for implementing high-performance single-photon sources required for scalable operation of integrated quantum photonic circuits (IQPCs), though such waveguides are known to suffer from propagation loss due to backscattering. A way to overcome the drawback is to use topological photonics, in which robust waveguiding in topologically-protected optical modes has recently been demonstrated. Here, we report single-photon sources using single quantum dots (QDs) embedded in topological slow light waveguides based on valley photonic crystals. We observe Purcell-enhanced single-photon emission from a QD into a topological slow light mode with a group index over 20 and its robust propagation even under the presence of sharp bends. These results pave the way for the realization of robust and high-performance single-photon sources indispensable for IQPCs.

physics.optics↗

arXiv2022

Optical Properties of Chiral Three-Dimensional Photonic Crystals made from Semiconductors

We perform a theoretical and numerical study of the optical properties of both direct and inverse three-dimensional (3D) chiral woodpile structures, and a corresponding chiral Bragg stack. We compute transmission spectra in the helical direction for finite crystals, and photonic band structures, where we ensure the effective index of all structures to be the same. We find that both 3D structures show dual-band circular dichroism, where light with a particular circular polarization state - either left- or right-handed - reveals a broad stop band with major attenuation, whereas the other polarization state is transmitted nearly unimpeded. We observe such gaps in different frequency ranges, with alternating handedness. The appearance of the circular-polarized gaps is successfully interpreted with a physical model wherein the circular polarization either co-rotates or counter-rotates with the chiral structure, thereby effectively leading to a spatially-dependent or a constant refractive index, and thus to the presence or absence of a gap. We find that the presence or absence of circularly polarized gaps is tuned by the transverse periods perpendicular to the chiral axis in both the 3D direct and inverse chiral woodpile crystal structures. The tunability of circular dichroism may find applications as on-chip sensors for circularly polarized light and in the on-chip detection of chiral molecules.

physics.optics↗

arXiv2022

A large-scale single-mode array laser based on a topological edge mode

Topological lasers have been intensively investigated as a strong candidate for robust single-mode lasers. A typical topological laser employs a single-mode topological edge state, which appears deterministically in a designed topological bandgap and exhibits robustness to disorder. These properties seem to be highly attractive in pursuit of high power lasers capable of single mode operation. In this paper, we theoretically analyze a large-scale single-mode laser based on a topological edge state. We consider a sizable array laser consisting of a few hundreds of site resonators, which support a single topological edge mode broadly distributed among the resonators. We build a basic model describing the laser using the tight binding approximation and evaluate the stability of single mode lasing based on the threshold gain difference $Δα$ between the first-lasing edge mode and the second-lasing competing bulk mode. Our calculations demonstrate that stronger couplings between the cavities and lower losses are advantageous for achieving stable operation of the device. When assuming an average coupling of 100 cm$^{-1}$ between site resonators and other realistic parameters, the threshold gain difference $Δα$ can reach about 2 cm$^{-1}$, which would be sufficient for stable single mode lasing using a conventional semiconductor laser architecture. We also consider the effects of possible disorders and long-range interactions to assess the robustness of the laser under non-ideal situations. These results lay the groundwork for developing single-mode high-power topological lasers.

physics.optics↗

arXiv2021

Unidirectional output from a quantum-dot single-photon source hybrid integrated on silicon

We report a quantum-dot single-photon source (QD SPS) hybrid integrated on a silicon waveguide embedding a photonic crystal mirror, which reflects photons and enables efficient unidirectional output from the waveguide. The silicon waveguide is constituted of a subwavelength grating so as to maintain the high efficiency even under the presence of stacking misalignment accompanied by hybrid integration processes. Experimentally, we assembled the hybrid photonic structure by transfer printing, and demonstrated single-photon generation from a QD and its unidirectional output from the waveguide. These results point out a promising approach toward scalable integration of SPSs on silicon quantum photonics platforms.

physics.optics↗

arXiv2021

Coupling of a Single Tin-vacancy Center to a Photonic Crystal Cavity in Diamond

We demonstrate optical coupling between a single tin-vacancy (SnV) center in diamond and a free-standing photonic crystal nanobeam cavity. The cavities are fabricated using quasi-isotropic etching and feature experimentally measured quality factors as high as ~11,000. We investigate the dependence of a single SnV center's emission by controlling the cavity wavelength using a laser-induced gas desorption technique. Under resonance conditions, we observe an intensity enhancement of the SnV emission by a factor of 12 and a 16-fold reduction of the SnV lifetime. Based on the large enhancement of the SnV emission rate inside the cavity, we estimate the Purcell factor for the SnV zero-phonon line to be 37 and the coupling efficiency of the SnV center to the cavity, the beta factor, to be 95%. Our work paves the way for the realization of quantum photonic devices and systems based on efficient photonic interfaces using the SnV color center in diamond.

physics.optics↗

arXiv2021

Synthetic dimension band structures on a Si CMOS photonic platform

Synthetic dimensions, which simulate spatial coordinates using non-spatial degrees of freedom, are drawing interest in topological science and other fields for modelling higher-dimensional phenomena on simple structures. We present the first realization of a synthetic frequency dimension on a silicon ring resonator photonic device fabricated using a CMOS process. We confirm that its coupled modes correspond to a 1D tight-binding model through acquisition of up to 280 GHz bandwidth optical frequency comb-like spectra, and by measuring the first synthetic band structures on an integrated device. Furthermore, we realized two types of gauge potentials along the frequency dimension, and probed their effects through the associated band structures. An electric field analogue was produced via modulation detuning, whereas effective magnetic fields were induced using synchronized nearest- and second-nearest-neighbor coupling. Creation of coupled mode lattices and two effective forces on a monolithic Si CMOS device represents a key step towards wider adoption of topological principles.

physics.optics↗

arXiv2021

Experimental demonstration of topological slow light waveguides in valley photonic crystals

We experimentally demonstrate topological slow light waveguides in valley photonic crystals (VPhCs). We employed a bearded interface formed between two topologically-distinct VPhCs patterned in an air-bridged silicon slab. The interface supports both topological and non-topological slow light modes below the light line. By means of optical microscopy, we observed light propagation in the topological mode in the slow light regime with a group index $n_{\rm g}$ over $30$. Furthermore, we confirmed light transmission via the slow light mode even under the presence of sharp waveguide bends. In comparison between the topological and non-topological modes, we found that the topological mode exhibits much more efficient waveguiding than the trivial one, elucidating topological protection in the slow light regime. This work paves the way for exploring topological slow-light devices compatible with existing photonics technologies.

physics.optics↗

arXiv2020

Strong coupling between a single quantum dot and an L4/3 photonic crystal nanocavity

We demonstrate strong coupling between a single quantum dot and a GaAs-based L4/3-type photonic crystal nanocavity. The L4/3 cavity supports a high theoretical Q factor (~8{\times}10^6), a small mode volume (~0.32 (λ/n)^3), and an electric field distribution with the maximum electric field lying within the host dielectric material, which facilitates strong coupling with a quantum dot. We fabricated L4/3 cavities and observed a high Q factor over 80,000 using photoluminescence measurement. We confirmed strong coupling between a single quantum dot and an L4/3 cavity with a Q factor of 33,000 by observing a clear anti-crossing in the spectra.

quant-ph↗

arXiv2020

Microcavity-based Generation of Full Poincaré Beams with Arbitrary Skyrmion Numbers

A full Poincaré (FP) beam possesses all possible optical spin states in its cross-section, which constitutes an optical analogue of a skyrmion. Until now, FP beams have been exclusively generated using bulk optics. Here, we propose a generation scheme of an FP beam based on an optical microring cavity. We position two different angular gratings along with chiral lines on a microring cavity and generate an FP beam as a superposition of two light beams with controlled spin and orbital angular momenta. We numerically show that FP beams with tailored skyrmion numbers can be generated from this device, opening a route for developing compact light sources with unique optical spin fields.

physics.optics↗