arXiv subjects

Satoshi Yamamori

Publications and source records attributed to Satoshi Yamamori.

6 recordsLinked to original sources

arXiv2026

Actuator Reality Shaping for Zero-Shot Sim-to-Real Robot Learning

Sim-to-real transfer in robot learning is often limited by discrepancies between the ideal actuator dynamics assumed during policy training and the nonlinear, hardware-dependent behavior of physical motors. While conventional approaches attempt to bridge this gap by increasing simulator fidelity through system identification, domain randomization, or learned actuator models, we introduce an alternative paradigm: actuator reality shaping. Instead of modifying the simulator to match the real world, our method shapes the closed-loop behavior of physical actuators to match the idealized second-order reference dynamics used in simulation. By equipping each joint with a two-degree-of-freedom feedforward--feedback controller, we decouple reference-response shaping from robust stabilization, thereby providing a standardized actuator interface for reinforcement learning policies. As a result, policies trained only with the prescribed reference model can be deployed zero-shot on real hardware without task-level fine-tuning or learned actuator models. We validate the approach on a single-joint high-gear-ratio servo under external loads and a 7-DOF robotic arm reaching task, where actuator reality shaping substantially reduces sim-to-real tracking error and improves zero-shot task performance compared with standard servo-control and representative real-to-sim-to-real baselines. We further demonstrate zero-shot transfer on a wheeled-legged robot driving over a slope and a humanoid robot walking, suggesting that actuator reality shaping can serve as a reusable interface for robot learning across diverse hardware platforms. Project page: https://syamamori.github.io/ActuatorRealityShaping.github.io/

cs.RO↗

arXiv2025

Object-Centric Mobile Manipulation through SAM2-Guided Perception and Imitation Learning

Imitation learning for mobile manipulation is a key challenge in the field of robotic manipulation. However, current mobile manipulation frameworks typically decouple navigation and manipulation, executing manipulation only after reaching a certain location. This can lead to performance degradation when navigation is imprecise, especially due to misalignment in approach angles. To enable a mobile manipulator to perform the same task from diverse orientations, an essential capability for building general-purpose robotic models, we propose an object-centric method based on SAM2, a foundation model towards solving promptable visual segmentation in images, which incorporates manipulation orientation information into our model. Our approach enables consistent understanding of the same task from different orientations. We deploy the model on a custom-built mobile manipulator and evaluate it on a pick-and-place task under varied orientation angles. Compared to Action Chunking Transformer, our model maintains superior generalization when trained with demonstrations from varied approach angles. This work significantly enhances the generalization and robustness of imitation learning-based mobile manipulation systems.

cs.RO↗

arXiv2025

Phase-Amplitude Reduction-Based Imitation Learning

In this study, we propose the use of the phase-amplitude reduction method to construct an imitation learning framework. Imitating human movement trajectories is recognized as a promising strategy for generating a range of human-like robot movements. Unlike previous dynamical system-based imitation learning approaches, our proposed method allows the robot not only to imitate a limit cycle trajectory but also to replicate the transient movement from the initial or disturbed state to the limit cycle. Consequently, our method offers a safer imitation learning approach that avoids generating unpredictable motions immediately after disturbances or from a specified initial state. We first validated our proposed method by reconstructing a simple limit-cycle attractor. We then compared the proposed approach with a conventional method on a lemniscate trajectory tracking task with a simulated robot arm. Our findings confirm that our proposed method can more accurately generate transient movements to converge on a target periodic attractor compared to the previous standard approach. Subsequently, we applied our method to a real robot arm to imitate periodic human movements.

cs.RO↗

arXiv2025

Foundational Policy Acquisition via Multitask Learning for Motor Skill Generation

In this study, we propose a multitask reinforcement learning algorithm for foundational policy acquisition to generate novel motor skills. \textcolor{\hcolor}{Learning the rich representation of the multitask policy is a challenge in dynamic movement generation tasks because the policy needs to cope with changes in goals or environments with different reward functions or physical parameters. Inspired by human sensorimotor adaptation mechanisms, we developed the learning pipeline to construct the encoder-decoder networks and network selection to facilitate foundational policy acquisition under multiple situations. First, we compared the proposed method with previous multitask reinforcement learning methods in the standard multi-locomotion tasks. The results showed that the proposed approach outperformed the baseline methods. Then, we applied the proposed method to the ball heading task using a monopod robot model to evaluate skill generation performance. The results showed that the proposed method was able to adapt to novel target positions or inexperienced ball restitution coefficients but to acquire a foundational policy network, originally learned for heading motion, which can generate an entirely new overhead kicking skill.

cs.RO↗

arXiv2025

Poxel: Voxel Reconstruction for 3D Printing

Recent advancements in 3D reconstruction, especially through neural rendering approaches like Neural Radiance Fields (NeRF) and Plenoxel, have led to high-quality 3D visualizations. However, these methods are optimized for digital environments and employ view-dependent color models (RGB) and 2D splatting techniques, which do not translate well to physical 3D printing. This paper introduces "Poxel", which stands for Printable-Voxel, a voxel-based 3D reconstruction framework optimized for photopolymer jetting 3D printing, which allows for high-resolution, full-color 3D models using a CMYKWCl color model. Our framework directly outputs printable voxel grids by removing view-dependency and converting the digital RGB color space to a physical CMYKWCl color space suitable for multi-material jetting. The proposed system achieves better fidelity and quality in printed models, aligning with the requirements of physical 3D objects.

cs.GR↗

arXiv2024

Goal-Conditioned Terminal Value Estimation for Real-time and Multi-task Model Predictive Control

While MPC enables nonlinear feedback control by solving an optimal control problem at each timestep, the computational burden tends to be significantly large, making it difficult to optimize a policy within the control period. To address this issue, one possible approach is to utilize terminal value learning to reduce computational costs. However, the learned value cannot be used for other tasks in situations where the task dynamically changes in the original MPC setup. In this study, we develop an MPC framework with goal-conditioned terminal value learning to achieve multitask policy optimization while reducing computational time. Furthermore, by using a hierarchical control structure that allows the upper-level trajectory planner to output appropriate goal-conditioned trajectories, we demonstrate that a robot model is able to generate diverse motions. We evaluate the proposed method on a bipedal inverted pendulum robot model and confirm that combining goal-conditioned terminal value learning with an upper-level trajectory planner enables real-time control; thus, the robot successfully tracks a target trajectory on sloped terrain.

cs.RO↗