arXiv subjects
Publications and source records attributed to Satyam Kumar.
Because precipitation is regulated by intricate interactions between topography, cloud microphysics,cumulus convection, radiation, and boundary-layer processes, it is still difficult to accurately simulate orographically enhanced monsoon rainfall over the Western Ghats.
Automated candidate-job matching systems are increasingly classified as high-risk AI under emerging regulation, yet auditing them for demographic bias is expensive: classical correspondence-audit studies require hand-crafted resumes and manual submission, which does not scale to fast pipeline retraining cycles. This paper presents a general, reusable methodology that (1) uses task-specialized LLM agents to synthesize identity-neutral base resumes and inject controlled demographic treatments across five protected-characteristic axes (sex/gender, age, residence, language, disability), producing a K x (1+N) correspondence-audit matrix; (2) qualitatively flags inferred protected characteristics per an EU AI Act-aligned prompt; (3) ranks candidates against a job description via a fine-tuned sentence-embedding model and cosine similarity; and (4) computes a nine-metric fairness suite spanning counterfactual (score delta, mean absolute rank change, flip rate), group-fairness (top-K retention, four-fifths/impact ratio), and merit-aware (Recall@K, nDCG@K, equal opportunity, equalized odds) families, each with bootstrap confidence intervals, significance tests, and Benjamini-Hochberg correction, culminating in an automated PASS/INVESTIGATE/FAIL report with a composite risk score. On an example corpus of 5 job orders, 100 base candidates, and 10 demographic treatments (90 metric x variant evaluations): score shifts, top-K retention, and merit-aware rate gaps stay within tolerance for every treatment, but a rank-stability metric (MARC) and nDCG@K each surface borderline findings - including one on the neutral baseline itself - that a score- or retention-only view would miss. The results argue for multi-metric, multi-family auditing over any single aggregate score, and for LLM-agent-generated audits as a practical, low-cost complement to human-curated audits for any candidate-job matching pipeline.
Networking research advances by turning hypotheses into empirical evidence, so accelerating it means reducing the lag between ideation (synthesizing a hypothesis) and generating the data that tests it. Consider a concrete case: does a bulk BBR download fairly share its bottleneck with competing real-time Google Meet traffic? Validating this requires configuring a realistic bottleneck link, concurrently generating BBR's bulk transfer and Meet's real-time traffic, and collecting relevant service-quality metrics. Today this overhead is high, often forcing researchers to start from scratch for every new idea. This ideation-to-data-generation gap will only worsen in the agentic AI era, where AI-assisted ideation accelerates exponentially, yet its outputs cannot be validated without a data-generation backend. This paper explores how to bridge this gap. We envision a composable, domain-specific backend, Pramana, shaped as a thin waist, with diverse research intents at the top and disparate execution substrates at the bottom. Pramana realizes this waist through a single contract, the intent specification, which disaggregates an experiment into three independent axes: the intent (what data to generate), the substrate (where to generate it), and the mechanism (how to produce it), so one specification runs on any substrate. We demonstrate Pramana's utility by building a first-of-its-kind corpus of 255 data-generation intents mined from 66 published papers, and show the intent specification satisfies all of them, where no existing tool satisfies more than 13%. Our current proof-of-concept implementation already satisfies 34% of these intents, more than twice the best existing tool, and we lay out a roadmap for closing this abstraction-implementation gap through a broader community effort to build the envisioned data-generation backend and accelerate empirical networking research.
AI safety has a missing layer. Interpretability, formal methods, security engineering, evaluation methodology, and reinforcement-learning safety each produce substantial work, but the resulting artifacts do not compose into deployable oversight: every team fielding an agentic system builds its own audit schema, policy dialect, monitoring stack, and escalation path, mostly reinventions of patterns understood elsewhere. We diagnose this as a coordination gap, not a research gap, and propose a two-axis taxonomy: five technical layers (Legibility, Specification, Mediation, Evaluation, Escalation) crossed with six concerns spanning alignment, robustness, adversarial defense, security, governance, and accountability, populating the resulting 5x6 matrix with existing work. Layer 2 (Specification), where humans translate intent into machine-checkable artifacts, is the connective tissue every layer depends on, yet it lacks four marks of a mature engineering discipline: shared vocabulary, design principles, composability standards, and governance practices. We propose six design principles for Layer 2, from elicitability and composability to adversary-awareness, traceability, and governability, made concrete through worked examples and a reference architecture turning specifications into runtime enforcement, evaluation, and escalation. Existing systems such as Cedar, Constitutional AI, and Open Policy Agent each address a fragment of Layer 2 well and the matrix poorly; treating them as fragments of one shared layer makes composition tractable. As evidence, we introduce CARMA, a Layer 2 prototype for autonomous ETL agents in which one specification drives enforcement, evaluation, and escalation, with every decision traceable to a versioned specification, naming what AI oversight is missing and giving independent teams principles to build the missing pieces so they compose.
On-policy knowledge distillation transfers reasoning from large teachers to compact students, but existing approaches suffer three compounding failure modes: (i) cold-start collapse, where a fresh student assigns near-zero mass to teacher-preferred tokens; (ii) state-agnostic divergence scheduling, where time-only forward/reverse-KL interpolation ignores the student's coverage state; and (iii) binary reward sparsity, where pass/fail signals discard information from partially correct traces. We present CADENCE, a unified framework with a targeted fix for each. Its DRIFT mechanism schedules a per-token convex mixture of forward-KL and reverse-KL surrogate objectives on student-sampled trajectories (per-token surrogates, not sequence-level KL gradient estimators). Six components extend it: (A) COVA, a coverage-adaptive $\beta$ schedule accelerating the forward-to-reverse transition; (B) FTB, a forking-token boost concentrating gradient at high-entropy positions via a globally-normalized entropy reference; (C) CCD, a dense reward adding numerical-proximity partial credit for incorrect-but-close traces; (D) LAP, brevity-preferential correct-rollout reinforcement; (E) EMR, an entropy-matching calibration regularizer; (F) BSD, a bootstrapped self-distillation phase. On GSM8K and MATH-500 (corrected 512-token protocol, 5 seeds, reported std), CADENCE distills a 0.5B student from a 1.5B teacher to 69.8 $\pm$ 0.5% GSM8K pass@1 (from 48.7% pretrained; 63.2% of the teacher gap closed) and to 72.1 $\pm$ 0.4% with a 3B teacher (76.2% closed), beating the strongest matched-compute label-using baseline (DRIFT+binary reward) by +4.4 $\pm$ 0.7 points. All experiments run on a single Apple Mac Studio (M-series, 64GB unified memory), showing principled distillation reaches strong reasoning quality without datacenter-scale hardware.
An extensive diffusion analysis is presented for binary Ni-X and ternary Ni-Al-X (X = Cr, Mo, Ta, W, Re) systems, which play a crucial role in microstructural evolution and phase stability in Ni-Al-based superalloys. Specifically, we highlight changes in the diffusion coefficients of X in the presence of Al and compare diffusional interactions across systems considered. First-principles calculations, combined with activation energies derived from temperature-dependent experiments, reveal consistent trends in Ni-X systems, with variations in activation energies largely attributed to differences in migration energies. In ternary systems, diffusion coefficients estimated from intersecting diffusion profiles show that the main interdiffusion coefficient of X is comparable to its binary counterpart, with similar activation energies. However, cross-diffusion coefficients are shown to significantly influence fluxes, either enhancing or reducing diffusion lengths depending on the relative directions of diffusing elements. For Ni-Al-Re, a single-profile method is employed to overcome uncertainties in estimating composition gradients at the near-end-member intersecting composition. The diffusion coefficients obtained correlate well with the nature of diffusion paths when represented on Gibbs triangles. To extend these findings, a physics-informed neural network (PINN) optimization method is applied to extract composition-dependent diffusion coefficients across the full composition range. The analysis demonstrates the necessity of incorporating experimentally estimated diffusion coefficients as equality constraints, without which optimization reliability is compromised. Overall, the results establish a robust framework for diffusion studies in Ni-Al-X systems, highlighting the critical role of cross-diffusion effects and constraint-enhanced numerical methods.
We present Forge-UGC (FX Optimization and Register-Graph Engine for Universal Graph Compilation), a four-phase compiler for transformer deployment on heterogeneous accelerator hardware, validated on Intel AI Boost NPU. Existing frameworks such as OpenVINO and ONNX Runtime often use opaque compilation pipelines, limited pass-level visibility, and weak buffer management, which can lead to higher compilation cost and runtime overhead. Forge-UGC addresses this with a hardware-agnostic design that separates graph capture, optimization, intermediate representation lowering, and backend scheduling. Phase 1 captures graphs with torch.export at the ATen operator level, supporting modern transformer components such as rotary position embeddings, grouped-query attention, and SwiGLU without manual decomposition. Phase 2 applies six optimization passes: dead code elimination, common subexpression elimination, constant folding, attention fusion, operator fusion, and layout optimization, reducing graph node count by 14.2 to 21.9%. Phase 3 lowers the optimized graph into a typed intermediate representation with explicit virtual register assignments. Phase 4 performs liveness analysis, linear-scan buffer allocation, reducing peak buffer count by 30 to 48%, and device-affinity scheduling, reducing NPU-CPU transitions by 42 to 65%. Across six model families ranging from 125M to 8B parameters, evaluated on WikiText-103 and GLUE, Forge-UGC delivers 6.9 to 9.2x faster compilation than OpenVINO and ONNX Runtime, 18.2 to 35.7% lower inference latency, and 30.2 to 40.9% lower energy per inference. Fidelity is preserved, with max absolute logit differences below 2.1e-5 and KL divergence below 8.4e-9. We also introduce Fusion Gain Ratio, Compilation Efficiency Index, and per-pass execution profiling for systematic evaluation of NPU compilation pipelines.
Two distinct technologies have gained attention lately due to their prospects for motor rehabilitation: robotics and brain-machine interfaces (BMIs). Harnessing their combined efforts is a largely uncharted and promising direction that has immense clinical potential. However, a significant challenge is whether motor intentions from the user can be accurately detected using non-invasive BMIs in the presence of instrumental noise and passive movements induced by the rehabilitation exoskeleton. As an alternative to the straightforward continuous control approach, this study instead aims to characterize the onset and offset of motor imagery during passive arm movements induced by an upper-body exoskeleton to allow for the natural control (initiation and termination) of functional movements. Ten participants were recruited to perform kinesthetic motor imagery (MI) of the right arm while attached to the robot, simultaneously cued with LEDs indicating the initiation and termination of a goal-oriented reaching task. Using electroencephalogram signals, we built a decoder to detect the transition between i) rest and beginning MI and ii) maintaining and ending MI. Offline decoder evaluation achieved group average onset accuracy of 60.7% and 66.6% for offset accuracy, revealing that the start and stop of MI could be identified while attached to the robot. Furthermore, pseudo-online evaluation could replicate this performance, forecasting reliable online exoskeleton control in the future. Our approach showed that participants could produce quality and reliable sensorimotor rhythms regardless of noise or passive arm movements induced by wearing the exoskeleton, which opens new possibilities for BMI control of assistive devices.
Robot-assisted therapy can deliver high-dose, task-specific training after neurologic injury, but most systems act primarily at the limb level-engaging the impaired neural circuits only indirectly-which remains a key barrier to truly contingent, neuroplasticity-targeted rehabilitation. We address this gap by implementing online, dual-state motor imagery control of an upper-limb exoskeleton, enabling goal-directed reaches to be both initiated and terminated directly from non-invasive EEG. Eight participants used EEG to initiate assistance and then volitionally halt the robot mid-trajectory. Across two online sessions, group-mean hit rates were 61.5% for onset and 64.5% for offset, demonstrating reliable start-stop command delivery despite instrumental noise and passive arm motion. Methodologically, we reveal a systematic, class-driven bias induced by common task-based recentering using an asymmetric margin diagnostic, and we introduce a class-agnostic fixation-based recentering method that tracks drift without sampling command classes while preserving class geometry. This substantially improves threshold-free separability (AUC gains: onset +56%, p = 0.0117; offset +34%, p = 0.0251) and reduces bias within and across days. Together, these results help bridge offline decoding and practical, intention-driven start-stop control of a rehabilitation exoskeleton, enabling precisely timed, contingent assistance aligned with neuroplasticity goals while supporting future clinical translation.
LinkedIn Feed enables professionals worldwide to discover relevant content, build connections, and share knowledge at scale. We present Feed Sequential Recommender (Feed SR), a transformer-based sequential ranking model for LinkedIn Feed that replaces a DCNv2-based ranker and meets strict production constraints. We detail the modeling choices, training techniques, and serving optimizations that enable deployment at a scale of 1.2 billion members. Feed SR has been serving the majority of LinkedIn's Feed traffic for over three months and shows significant improvements in member engagement (+2.10% time spent, +3.52% like, comments, or reshares) in online A/B tests compared to the existing production model. We also describe our deployment experience with alternative sequential and LLM-based ranking architectures and why Feed SR provided the best combination of online metrics and production efficiency.
Efficient LLM serving must balance throughput and latency across diverse, bursty workloads. We introduce StreamServe, a disaggregated prefill decode serving architecture that combines metric aware routing across compute lanes with adaptive speculative decoding that tunes speculation depth online from runtime signals. StreamServe comprises four components: StreamScheduler for request orchestration, FlowGuard for multi signal routing, PipeServe Engine for disaggregated prefill decode execution on multi GPU, and SpecuStream for runtime adaptive speculation. We evaluate StreamServe on four benchmarks ALPACA, GSM8K, HUMANEVAL, and SUM with 80 queries each and 320 total using 4 A800 40GB GPUs configured as two stream pairs. Across these workloads, StreamServe reduces latency by 11 to 18 times relative to tensor parallel vLLM baselines and reaches throughput up to 2235 tokens per second on summarization tasks. Time per output token remains stable across configurations, indicating that the gains arise from architectural efficiency rather than token quality degradation. Although evaluated on a single node 4 GPU setup, these results suggest that jointly adapting routing and speculation within a disaggregated framework creates a distinct operating regime for LLM inference.
Deploying large language models (LLMs) on heterogeneous edge devices demands frameworks that jointly optimize energy efficiency, inference quality, and reliability. Our prior QEIL v1 (Kumar & Jha, 2026) achieved 4.82x IPW improvement but relied on static efficiency factors, greedy optimization, and unverified candidate selection. QEIL v2 replaces every static heuristic with physics-grounded, runtime-adaptive models. We introduce three device-workload metrics: DASI (roofline-derived compute utilization), CPQ (memory pressure from allocation theory), and Phi (thermal yield from CMOS leakage physics), forming a unified energy equation with every coefficient traceable to semiconductor physics. For optimization, PGSAM (Pareto-Guided Simulated Annealing with Momentum) simultaneously minimizes energy, latency, and device underutilization. At inference time, the EAC/ARDE selection cascade with CSVET early stopping provides progressive verification among repeated samples. Evaluated on WikiText-103, GSM8K, and ARC-Challenge across seven model families (125M-8B parameters, including one pre-quantized variant), QEIL v2 achieves 75.7% pass@k at 63.8W (IPW=0.9749), a 2.86x improvement over standard inference. When applied to a 4-bit Llama-3.1-8B, QEIL v2's physics-grounded routing achieves IPW=1.024 at 54.8W -- the first edge orchestration system to surpass the IPW=1.0 empirical reference mark, with the gain attributable entirely to QEIL v2's workload-adaptive device allocation on a model with reduced memory bandwidth requirements. Total energy drops 75.6% vs. standard with 38.3% latency reduction, zero thermal throttling, and 100% fault recovery across all benchmarks and model families.
Automatic chest X-ray report generation is an important area of research aimed at improving diagnostic accuracy and helping doctors make faster decisions. Current AI models are good at finding correlations (or patterns) in medical images. Still, they often struggle to understand the deeper cause-and-effect relationships between those patterns and a patient condition. Causal inference is a powerful approach that goes beyond identifying patterns to uncover why certain findings in an X-ray relate to a specific diagnosis. In this paper, we will explore the prompt-driven framework Causal Reasoning for Patient-Centric Explanations in radiology Report Generation (CR3G) that is applied to chest X-ray analysis to improve understanding of AI-generated reports by focusing on cause-and-effect relationships, reasoning and generate patient-centric explanation. The aim to enhance the quality of AI-driven diagnostics, making them more useful and trustworthy in clinical practice. CR3G has shown better causal relationship capability and explanation capability for 2 out of 5 abnormalities.
We present a comprehensive real-world evaluation of AI-assisted software development tools deployed at enterprise scale. Over one year, 300 engineers across multiple teams integrated an in-house AI platform (DeputyDev) that combines code generation and automated review capabilities into their daily workflows. Through rigorous cohort analysis, our study demonstrates statistically significant productivity improvements, including an overall 31.8% reduction in PR review cycle time. Developer adoption was strong, with 85% satisfaction for code review features and 93% expressing a desire to continue using the platform. Adoption patterns showed systematic scaling from 4% engagement in month 1 to 83% peak usage by month 6, stabilizing at 60% active engagement. Top adopters achieved a 61% increase in code volume pushed to production, contributing to approximately 30 to 40% of code shipped to production through this tool, accounting for an overall 28% increase in code shipment volume. Unlike controlled benchmark evaluations, our longitudinal analysis provides empirical evidence from production environments, revealing both the transformative potential and practical deployment challenges of integrating AI into enterprise software development workflows.
Accurate workload prediction and advanced resource reservation are indispensably crucial for managing dynamic cloud services. Traditional neural networks and deep learning models frequently encounter challenges with diverse, high-dimensional workloads, especially during sudden resource demand changes, leading to inefficiencies. This issue arises from their limited optimization during training, relying only on parametric (inter-connection weights) adjustments using conventional algorithms. To address this issue, this work proposes a novel Comprehensively Adaptive Architectural Optimization-based Variable Quantum Neural Network (CA-QNN), which combines the efficiency of quantum computing with complete structural and qubit vector parametric learning. The model converts workload data into qubits, processed through qubit neurons with Controlled NOT-gated activation functions for intuitive pattern recognition. In addition, a comprehensive architecture optimization algorithm for networks is introduced to facilitate the learning and propagation of the structure and parametric values in variable-sized QNNs. This algorithm incorporates quantum adaptive modulation and size-adaptive recombination during training process. The performance of CA-QNN model is thoroughly investigated against seven state-of-the-art methods across four benchmark datasets of heterogeneous cloud workloads. The proposed model demonstrates superior prediction accuracy, reducing prediction errors by up to 93.40% and 91.27% compared to existing deep learning and QNN-based approaches.
Voice activity detection (VAD) is a critical component in various applications such as speech recognition, speech enhancement, and hands-free communication systems. With the increasing demand for personalized and context-aware technologies, the need for effective personalized VAD systems has become paramount. In this paper, we present a comparative analysis of Personalized Voice Activity Detection (PVAD) systems to assess their real-world effectiveness. We introduce a comprehensive approach to assess PVAD systems, incorporating various performance metrics such as frame-level and utterance-level error rates, detection latency and accuracy, alongside user-level analysis. Through extensive experimentation and evaluation, we provide a thorough understanding of the strengths and limitations of various PVAD variants. This paper advances the understanding of PVAD technology by offering insights into its efficacy and viability in practical applications using a comprehensive set of metrics.
Causal Inference plays an significant role in explaining the decisions taken by statistical models and artificial intelligence models. Of late, this field started attracting the attention of researchers and practitioners alike. This paper presents a comprehensive survey of 37 papers published during 1992-2023 and concerning the application of causal inference to banking, finance, and insurance. The papers are categorized according to the following families of domains: (i) Banking, (ii) Finance and its subdomains such as corporate finance, governance finance including financial risk and financial policy, financial economics, and Behavioral finance, and (iii) Insurance. Further, the paper covers the primary ingredients of causal inference namely, statistical methods such as Bayesian Causal Network, Granger Causality and jargon used thereof such as counterfactuals. The review also recommends some important directions for future research. In conclusion, we observed that the application of causal inference in the banking and insurance sectors is still in its infancy, and thus more research is possible to turn it into a viable method.
Of late, in order to have better acceptability among various domain, researchers have argued that machine intelligence algorithms must be able to provide explanations that humans can understand causally. This aspect, also known as causability, achieves a specific level of human-level explainability. A specific class of algorithms known as counterfactuals may be able to provide causability. In statistics, causality has been studied and applied for many years, but not in great detail in artificial intelligence (AI). In a first-of-its-kind study, we employed the principles of causal inference to provide explainability for solving the analytical customer relationship management (ACRM) problems. In the context of banking and insurance, current research on interpretability tries to address causality-related questions like why did this model make such decisions, and was the model's choice influenced by a particular factor? We propose a solution in the form of an intervention, wherein the effect of changing the distribution of features of ACRM datasets is studied on the target feature. Subsequently, a set of counterfactuals is also obtained that may be furnished to any customer who demands an explanation of the decision taken by the bank/insurance company. Except for the credit card churn prediction dataset, good quality counterfactuals were generated for the loan default, insurance fraud detection, and credit card fraud detection datasets, where changes in no more than three features are observed.