arXiv subjects

Scott Cray

Publications and source records attributed to Scott Cray.

6 recordsLinked to original sources

arXiv2026

3D Printed Alumina as a Millimeter-Wave Optical Element

We present millimeter and sub-millimeter room temperature transmission and loss measurements of 3D printed alumina disc and of a disc with one-sided 3D printed sub-wavelength structures anti-reflection coatings (SWS-ARC). For four bands spanning 158 - 700~GHz we find an index of refraction consistent with $n= 3.107 \pm 0.007$. The loss over the entire frequency band between 158~GHz and 700~GHz spans $ 1 \cdot 10^{-3} \leq \tan \delta \leq 2.49 \cdot 10^{-3}$ with 10%-30% uncertainty at the lower range of frequencies shrinking to $\sim\!2\%$ at the higher frequencies. As expected, constructive and destructive interference fringes that are apparent with the flat disc data are absent with the disc that has SWS-ARC. The measured data are consistent with finite element analysis predictions that are based on the measured shape of the SWS. At frequencies between 158~GHz and 200~GHz, below the onset of diffraction effects, reflectance is reduced from a maximum of 64% to about 25%, closely matching predictions. These measurements of the index, loss, and SWS-ARC of 3D printed alumina suggest that the material and fabrication technique could be useful for astrophysical applications.

astro-ph.IM↗

arXiv2026

Silicon-based vacuum window for millimeter and submillimeter-wave astrophysics

We designed, fabricated, and characterized the properties of a silicon-based vacuum window suitable for millimeter-wave astrophysical applications. The window, which has a diameter of 124 mm, optically active diameter of 68 mm, and thickness of about 4 mm, gives an average transmittance and reflectance of 99% and 1%, respectively, a fractional bandwidth of 67%. Absorptive loss is below the detection limit of our measurement. The anti-reflection coating is made with laser ablated sub-wavelength structures (SWS), and the measured transmittance and reflectance values agree with modeling based on the measured SWS shapes. The window has been integrated into DESHIMA v2.0, an astrophysics instrument that took year-long observations with the Atacama Submillimeter Telescope Experiment.

astro-ph.IM↗

arXiv2025

Laser ablated sub-wavelength structure anti-reflection coating on an alumina lens

We used laser ablation to fabricate sub-wavelength structure anti-reflection coating (SWS-ARC) on a 5 cm diameter alumina lens. With an aspect ratio of 2.5, the SWS-ARC are designed to give a broad-band low reflectance response between 110 and 290 GHz. SWS shape measurements conducted on both sides of the lens give 303 $\mu$m pitch and total height between 750 and 790 $\mu$m, matching or exceeding the aspect ratio design values. Millimeter-wave transmittance measurements in a band between 140 and 260 GHz show the increase in transmittance expected with the ARC when compared to finite element analysis electromagnetic simulations. To our knowledge, this is the first demonstration of SWS-ARC on an alumina lens, opening the path for implementing the technique for larger diameter lenses.

astro-ph.IM↗

arXiv2025

Prototype sub-wavelength structure anti-reflection coating on alumina filters for ground-based CMB telescopes

We present designs and fabrication of sub-wavelength anti-reflection (AR) structures on alumina for infrared absorptive filters with passbands near 30, 125, and 250 GHz. These bands are widely used by ground-based instruments measuring the cosmic microwave background radiation. The designs are tuned to provide reflectance of 2% or less for fractional bandwidths between 51% and 72%, with each of the three primary bands containing two sub-bands. We make the sub-wavelength structures (SWS), which resemble a two-dimensional array of pyramids, using laser ablation. We measure the shapes of the fabricated pyramids and show that for incidence angles up to 20 degrees the predicted in-band average reflectance is 2% or less, in agreement with the design. The band average instrumental polarization is less than $3\times 10^{-3}$.

astro-ph.IM↗

arXiv2024

OLIMPO: a Balloon-Borne SZE Imager to Probe ICM Dynamics and the WHIM

OLIMPO is a proposed Antarctic balloon-borne Sunyaev-Zel'dovich effect (SZE) imager to study gas dynamics associated with structure formation along with the properties of the warm-hot intergalactic medium (WHIM) residing in the connective filaments. During a 25 day flight OLIMPO will image a total of 10 z~0.05 galaxy clusters and 8 bridges at 145, 250, 365, and 460 GHz at an angular resolution of 1.0'-3.3'. The maps will be significantly deeper than those planned from CMB-S4 and CCAT-P, and will have excellent fidelity to the large angular scales of our low-z targets, which are difficult to probe from the ground. In combination with X-ray data from eROSITA and XRISM we will transform our current static view of galaxy clusters into a full dynamic picture by measuring the internal intra-cluster medium (ICM) velocity structure with the kinematic SZE, X-ray spectroscopy, and the power spectrum of ICM fluctuations. Radio observations from ASKAP and MeerKAT will be used to better understand the connection between ICM turbulence and shocks with the relativistic plasma. Beyond the cluster boundary, we will combine thermal SZE maps from OLIMPO with X-ray imaging from eROSITA to measure the thermodynamics of the WHIM residing in filaments, providing a better understanding of its properties and its contribution to the total baryon budget.

astro-ph.CO↗

arXiv2021

A Large Diameter Millimeter-Wave Low-Pass Filter Made of Alumina with Laser Ablated Anti-Reflection Coating

We fabricated a 302 mm diameter low-pass filter made of alumina that has an anti-reflection coating (ARC) made with laser-ablated sub-wavelength structures (SWS). The filter has been integrated into and is operating with the MUSTANG2 instrument, which is coupled to the Green Bank Telescope. The average transmittance of the filter in the MUSTANG2 operating band between 75 and 105 GHz is 98%. Reflective loss due to the ARC is 1%. The difference in transmission between the s- and p-polarization states is less than 1%. To within 1% accuracy we observe no variance in these results when transmission is measured in six independent filter spatial locations. The alumina filter replaced a prior MUSTANG2 Teflon filter. Data taken with the filter heat sunk to its nominal 40 K stage show performance consistent with expectations: a reduction of about 50% in filters-induced optical power load on the 300 mK stage, and in in-band optical loading on the detectors. It has taken less than 4 days to laser-ablate the SWS on both sides of the alumina disk. This is the first report of an alumina filter with SWS ARC deployed with an operating instrument, and the first demonstration of a large area fabrication of SWS with laser ablation.

astro-ph.IM↗