arXiv subjects

Seán McLoone

Publications and source records attributed to Seán McLoone.

11 recordsLinked to original sources

arXiv2025

Synchronized Object Detection for Autonomous Sorting, Mapping, and Quantification of Materials in Circular Healthcare

The circular economy paradigm is gaining interest as a solution to reducing both material supply uncertainties and waste generation. One of the main challenges in realizing this paradigm is monitoring materials, since in general, something that is not measured cannot be effectively managed. In this paper, we propose a real-time synchronized object detection framework that enables, at the same time, autonomous sorting, mapping, and quantification of solid materials. We begin by introducing the general framework for real-time wide-area material monitoring, and then, we illustrate it using a numerical example. Finally, we develop a first prototype whose working principle is underpinned by the proposed framework. The prototype detects 4 materials from 5 different models of inhalers and, through a synchronization mechanism, it combines the detection outputs of 2 vision units running at 12-22 frames per second (Fig. 1). This led us to introduce the notion of synchromaterial and to conceive a robotic waste sorter as a node compartment of a material network. Dataset, code, and demo videos are publicly available.

cs.CV↗

arXiv2024

SLYKLatent: A Learning Framework for Gaze Estimation Using Deep Facial Feature Learning

In this research, we present SLYKLatent, a novel approach for enhancing gaze estimation by addressing appearance instability challenges in datasets due to aleatoric uncertainties, covariant shifts, and test domain generalization. SLYKLatent utilizes Self-Supervised Learning for initial training with facial expression datasets, followed by refinement with a patch-based tri-branch network and an inverse explained variance-weighted training loss function. Our evaluation on benchmark datasets achieves a 10.9% improvement on Gaze360, supersedes top MPIIFaceGaze results with 3.8%, and leads on a subset of ETH-XGaze by 11.6%, surpassing existing methods by significant margins. Adaptability tests on RAF-DB and Affectnet show 86.4% and 60.9% accuracies, respectively. Ablation studies confirm the effectiveness of SLYKLatent's novel components.

cs.CV↗

arXiv2024

An NMPC-ECBF Framework for Dynamic Motion Planning and Execution in vision-based Human-Robot Collaboration

To enable safe and effective human-robot collaboration (HRC) in smart manufacturing, seamless integration of sensing, cognition, and prediction into the robot controller is critical for real-time awareness, response, and communication inside a heterogeneous environment (robots, humans, and equipment). The proposed approach takes advantage of the prediction capabilities of nonlinear model predictive control (NMPC) to execute a safe path planning based on feedback from a vision system. In order to satisfy the requirement of real-time path planning, an embedded solver based on a penalty method is applied. However, due to tight sampling times NMPC solutions are approximate, and hence the safety of the system cannot be guaranteed. To address this we formulate a novel safety-critical paradigm with an exponential control barrier function (ECBF) used as a safety filter. We also design a simple human-robot collaboration scenario using V-REP to evaluate the performance of the proposed controller and investigate whether integrating human pose prediction can help with safe and efficient collaboration. The robot uses OptiTrack cameras for perception and dynamically generates collision-free trajectories to the predicted target interactive position. Results for a number of different configurations confirm the efficiency of the proposed motion planning and execution framework. It yields a 19.8% reduction in execution time for the HRC task considered.

cs.RO↗

arXiv2024

QUB-PHEO: A Visual-Based Dyadic Multi-View Dataset for Intention Inference in Collaborative Assembly

QUB-PHEO introduces a visual-based, dyadic dataset with the potential of advancing human-robot interaction (HRI) research in assembly operations and intention inference. This dataset captures rich multimodal interactions between two participants, one acting as a 'robot surrogate,' across a variety of assembly tasks that are further broken down into 36 distinct subtasks. With rich visual annotations, such as facial landmarks, gaze, hand movements, object localization, and more for 70 participants, QUB-PHEO offers two versions: full video data for 50 participants and visual cues for all 70. Designed to improve machine learning models for HRI, QUB-PHEO enables deeper analysis of subtle interaction cues and intentions, promising contributions to the field. The dataset will be available at https://github.com/exponentialR/QUB-PHEO subject to an End-User License Agreement (EULA).

cs.CV↗

arXiv2024

Digital Twin-Driven Reinforcement Learning for Obstacle Avoidance in Robot Manipulators: A Self-Improving Online Training Framework

The evolution and growing automation of collaborative robots introduce more complexity and unpredictability to systems, highlighting the crucial need for robot's adaptability and flexibility to address the increasing complexities of their environment. In typical industrial production scenarios, robots are often required to be re-programmed when facing a more demanding task or even a few changes in workspace conditions. To increase productivity, efficiency and reduce human effort in the design process, this paper explores the potential of using digital twin combined with Reinforcement Learning (RL) to enable robots to generate self-improving collision-free trajectories in real time. The digital twin, acting as a virtual counterpart of the physical system, serves as a 'forward run' for monitoring, controlling, and optimizing the physical system in a safe and cost-effective manner. The physical system sends data to synchronize the digital system through the video feeds from cameras, which allows the virtual robot to update its observation and policy based on real scenarios. The bidirectional communication between digital and physical systems provides a promising platform for hardware-in-the-loop RL training through trial and error until the robot successfully adapts to its new environment. The proposed online training framework is demonstrated on the Unfactory Xarm5 collaborative robot, where the robot end-effector aims to reach the target position while avoiding obstacles. The experiment suggest that proposed framework is capable of performing policy online training, and that there remains significant room for improvement.

cs.RO↗

arXiv2023

Adaptive Safety-critical Control with Uncertainty Estimation for Human-robot Collaboration

In advanced manufacturing, strict safety guarantees are required to allow humans and robots to work together in a shared workspace. One of the challenges in this application field is the variety and unpredictability of human behavior, leading to potential dangers for human coworkers. This paper presents a novel control framework by adopting safety-critical control and uncertainty estimation for human-robot collaboration. Additionally, to select the shortest path during collaboration, a novel quadratic penalty method is presented. The innovation of the proposed approach is that the proposed controller will prevent the robot from violating any safety constraints even in cases where humans move accidentally in a collaboration task. This is implemented by the combination of a time-varying integral barrier Lyapunov function (TVIBLF) and an adaptive exponential control barrier function (AECBF) to achieve a flexible mode switch between path tracking and collision avoidance with guaranteed closed-loop system stability. The performance of our approach is demonstrated in simulation studies on a 7-DOF robot manipulator. Additionally, a comparison between the tasks involving static and dynamic targets is provided.

cs.RO↗

arXiv2022

Set based velocity shaping for robotic manipulators

We develop a new framework for trajectory planning on predefined paths, for general N-link manipulators. Different from previous approaches generating open-loop minimum time controllers or pre-tuned motion profiles by time-scaling, we establish analytic algorithms that recover all initial conditions that can be driven to the desirable target set while adhering to environment constraints. More technologically relevant, we characterise families of corresponding safe state-feedback controllers with several desirable properties. A key enabler in our framework is the introduction of a state feedback template, that induces ordering properties between trajectories of the resulting closed-loop system. The proposed structure allows working on the nonlinear system directly in both the analysis and synthesis problems. Both offline computations and online implementation are scalable with respect to the number of links of the manipulator. The results can potentially be used in a series of challenging problems: Numerical experiments on a commercial robotic manipulator demonstrate that efficient online implementation is possible.

cs.RO↗

arXiv2022

Material Measurement Units for a Circular Economy: Foundations through a Review

Long-term availability of minerals and industrial materials is a necessary condition for sustainable development as they are the constituents of any manufacturing product. To enhance the efficiency of material management, we define a computer-vision-enabled material measurement system and provide a review of works relevant to its development with particular emphasis on the foundations. A network of such systems for wide-area material stock monitoring is also covered. Finally, challenges and future research directions are discussed. As the first article bridging industrial ecology and advanced computer vision, this review is intended to support both research communities towards more sustainable manufacturing.

cs.CV↗

arXiv2022

Lazy FSCA for Unsupervised Variable Selection

Various unsupervised greedy selection methods have been proposed as computationally tractable approximations to the NP-hard subset selection problem. These methods rely on sequentially selecting the variables that best improve performance with respect to a selection criterion. Theoretical results exist that provide performance bounds and enable "lazy greedy" efficient implementations for selection criteria that satisfy a diminishing returns property known as submodularity. This has motivated the development of variable selection algorithms based on mutual information and frame potential. Recently, the authors introduced Forward Selection Component Analysis (FSCA) which uses variance explained as its selection criterion. While this criterion is not submodular, FSCA has been shown to be highly effective for applications such as measurement plan optimisation. In this paper a "lazy" implementation of the FSCA algorithm (L-FSCA) is proposed, which, although not equivalent to FSCA due to the absence of submodularity, has the potential to yield comparable performance while being up to an order of magnitude faster to compute. The efficacy of L-FSCA is demonstrated by performing a systematic comparison with FSCA and five other unsupervised variable selection methods from the literature using simulated and real-world case studies. Experimental results confirm that L-FSCA yields almost identical performance to FSCA while reducing computation time by between 22% and 94% for the case studies considered.

cs.LG↗

arXiv2020

Recovery of Linear Components: Reduced Complexity Autoencoder Designs

Reducing dimensionality is a key preprocessing step in many data analysis applications to address the negative effects of the curse of dimensionality and collinearity on model performance and computational complexity, to denoise the data or to reduce storage requirements. Moreover, in many applications it is desirable to reduce the input dimensions by choosing a subset of variables that best represents the entire set without any a priori information available. Unsupervised variable selection techniques provide a solution to this second problem. An autoencoder, if properly regularized, can solve both unsupervised dimensionality reduction and variable selection, but the training of large neural networks can be prohibitive in time sensitive applications. We present an approach called Recovery of Linear Components (RLC), which serves as a middle ground between linear and non-linear dimensionality reduction techniques, reducing autoencoder training times while enhancing performance over purely linear techniques. With the aid of synthetic and real world case studies, we show that the RLC, when compared with an autoencoder of similar complexity, shows higher accuracy, similar robustness to overfitting, and faster training times. Additionally, at the cost of a relatively small increase in computational complexity, RLC is shown to outperform the current state-of-the-art for a semiconductor manufacturing wafer measurement site optimization application.

cs.LG↗

arXiv2020

An Adaptive Memory Multi-Batch L-BFGS Algorithm for Neural Network Training

Motivated by the potential for parallel implementation of batch-based algorithms and the accelerated convergence achievable with approximated second order information a limited memory version of the BFGS algorithm has been receiving increasing attention in recent years for large neural network training problems. As the shape of the cost function is generally not quadratic and only becomes approximately quadratic in the vicinity of a minimum, the use of second order information by L-BFGS can be unreliable during the initial phase of training, i.e. when far from a minimum. Therefore, to control the influence of second order information as training progresses, we propose a multi-batch L-BFGS algorithm, namely MB-AM, that gradually increases its trust in the curvature information by implementing a progressive storage and use of curvature data through a development-based increase (dev-increase) scheme. Using six discriminative modelling benchmark problems we show empirically that MB-AM has slightly faster convergence and, on average, achieves better solutions than the standard multi-batch L-BFGS algorithm when training MLP and CNN models.

cs.LG↗