arXiv subjects

Seamus D. Clarke

Publications and source records attributed to Seamus D. Clarke.

12 recordsLinked to original sources

arXiv2026

Systematic underestimation of polarisation angle dispersion and its consequences for magnetic field strength estimates in star-forming regions

Polarised dust emission observations are a valuable tool to infer the structure of the magnetic field and the dispersion of polarisation position angles may be used to estimate magnetic field strengths. A natural consequence of magneto-dynamic turbulence is for the angular dispersion to have a length-scale dependence, making the measurement of angular dispersion non-trivial. In this paper, we present a study of parametrised, scale dependent maps, focusing on the effect of pixel size and beam convolution on the measured angular dispersion when using the commonly employed unsharp-masking and structure function methods. We find that in all cases the measured angular dispersion is underestimated compared to the true value. The degree to which the measured angular dispersion is underestimated varies by factors of 1-10 when measured on scales of 1-3x the beam size, and depends on the underlying structure of the polarisation angle field. This suggests that currently derived magnetic field strengths using angular dispersions are chronically overestimated, potentially leading to an overly magnetically-dominated view of star formation. We present a method to estimate a correction factor to account for this and apply it to JCMT Orion A OMC-1 observations. We find that the magnetic field in OMC-1 is predominately found to vary on scales much larger than the JCMT's 14'' beam and has a rather low degree of unresolved dispersion, leading to a correction factor of only $\sim$1.6 for angular dispersion measured at a scale of 14''/0.028 pc.

astro-ph.GA↗

arXiv2026

The Structure of an 80 pc Long Massive Filament

Using new Institut de Radioastronomie Millimétrique (IRAM) 30m telescope $\rm N_2H^+$, $\rm C^{18}O$ $J$=1-0 and Atacama Pathfinder Experiment (APEX) telescope $\rm ^{13}CO$ and $\rm C^{18}O$ $J$=2-1 maps together with archival far-infrared continuum data, and $\rm ^{12}CO$, and $\rm ^{13}CO$ $J$=1-0 data, we present a comprehensive analysis of the massive filament CFG024.00$+$0.48 (G24) across clump-to-cloud scales. Our results show that G24 is an $\sim$80 pc giant filament with a total mass of $\sim$$10^5$ M$_{\odot}$. In the different tracers the filament width is measured to be about $\sim$2 times the beam size of the observations, as expected for power-law density distributions, giving beam-deconvolved widths in the range from 0.8 to 2.8 pc. We determine a line-of-sight thickness of $\sim$2.2 pc demonstrating that G24 is not an edge-on, flatten structure. The virial parameter obtained from line mass ($α_{\rm line,vir}=M_{\rm line,vir}/M_{\rm line}$) from the $\rm C^{18}O$ (1-0) data is 0.85, and that obtained from $Herschel$-based H$_2$ column density is 0.52, suggesting G24 is globally close to virial equilibrium. The distribution of the 40 dust clumps appears to have a ''two-tier'' fragmentation pattern. For the clump groups, the separation, with a mean/median of 3.68/3.46 pc, is very close to expected length associated with the maximum fragmentation growth rate of $λ_{\rm max}=3.55 \pm0.32$ pc estimated for the dust. However, the longitudinal centroid velocity profiles of $\rm C^{18}O$ and $\rm N_2H^+$ show oscillation patterns with wavelengths of 9.8$\pm$0.1 pc and 9.9$\pm$0.1 pc, respectively. This is $\sim$2 times larger than the corresponding values of $λ_{\rm max}$ of 4.96$\pm$0.63 pc and 4.65$\pm$1.34 pc, respectively. This suggests that the velocity structure is not dominated by flows directly associated with the fragmentation seen in the dust emission.

astro-ph.GA↗

arXiv2025

Can Clump Properties Predict Core Distribution in Star Formation? A Statistical Analysis of MHD Simulations

Dense cores, the progenitors of stars, are in sub-pc scale and fragmented from pc-scale clumps. However, it is still unclear that how strongly the fragmentation process is affected by the properties of the host clumps, and how these properties influence the core distribution observed in recent millimeter (mm) and sub-mm observations. To systematically investigate this relation, we employed MHD simulations of convergent flows to generate a large sample of clumps and analyzed their properties using various techniques. Alignment parameters were used to quantify core distribution, while energy terms were calculated to assess the influence of gravity, magnetic fields, and turbulence. We found the core distribution only exhibiting weak correlations between alignment parameters and clump properties. For an individual clump, turbulence is believed to significantly contribute to these features by inducing non-homologous collapse and ongoing fragmentation. Nevertheless, for the entire population, more compact core distributions are observed due to the dominance of gravity. Overall, these factors suggest that clump properties are not sufficient to accurately determine core distribution.

astro-ph.GA↗

arXiv2025

Feedback and Star Formation Efficiency in High-Mass Star-Forming Regions

To advance our understanding of massive star formation, it is essential to perform a comprehensive suite of simulations that explore the relevant parameter space and include enough physics to enable a comparison with observational data. We simulate the gravitational collapse of isolated, parsec-scale turbulent cores using the FLASH code, modelling stars as sink particles. Our simulations incorporate ionizing radiation and the associated radiation pressure from stellar sources, and non-ionizing radiation and its dust heating, along with self-consistent chemistry, to capture the properties of emerging ultra-compact HII regions. Dust, gas, and radiation temperature are computed independently. The initial conditions are informed by ALMAGAL observations. We assess stellar feedback, comparing ionizing radiation and radiation pressure. Ionizing radiation ultimately halts mass accretion on to sink particles, while direct radiation pressure enhances the expansion of HII regions. Heating from non-ionizing radiation suppresses fragmentation. We examine the effect of spatial resolution, finding that higher resolution leads to more sink particles which are situated in environments with higher densities. As a result, ionizing radiation remains trapped longer, allowing continued accretion and yielding a higher overall star formation efficiency (SFE). We explore the impact of varying initial conditions, including the core density profile, virial parameter, and metallicity. Our parameter study reveals that a flatter density profile, higher virial parameter, and increased metallicity promote fragmentation, potentially enhancing the SFE by slowing the growth of the most massive stars and delaying the onset of stellar feedback. Overall, we find SFEs between 35% and 57%. Stellar feedback dictates the final SFE.

astro-ph.GA↗

arXiv2024

Alignment Parameters: Quantifying Dense Core Alignment in Star-forming Regions

Recent high-resolution observations at millimeter (mm) and sub-mm reveal a diverse spatial distribution for sub-pc scale dense cores within star-forming regions, ranging from clustered to aligned arrangements. To address the increasing volume of observational and simulation data, we introduce "alignment parameters" as a quantitative and reproducible method to automatically assess core alignment. We first demonstrate the effectiveness of these parameters by applying them to artificial test clumps and comparing the results with labels from visual inspection. A threshold value is then proposed to differentiate between "clustered" and "aligned" categories. Subsequently, we apply these parameters to dense cores identified from a sample of ALMA 1.3 mm dust continuum images in high-mass star-forming regions. Analysis exploring correlations between alignment parameters and clump properties rules out the presence of moderate or strong correlation, indicating that clump properties do not appear to strongly influence the outcome of fragmentation. One possible explanation for this is that the fragmentation process is chaotic, meaning that small variations in initial conditions can lead to significant differences in fragmentation outcomes, thus obscuring any direct link between clump properties and core alignment/distribution.

astro-ph.GA↗

arXiv2024

Filamentary Network and Magnetic Field Structures Revealed with BISTRO in the High-Mass Star-Forming Region NGC2264 : Global Properties and Local Magnetogravitational Configurations

We report 850 $μ$m continuum polarization observations toward the filamentary high-mass star-forming region NGC 2264, taken as part of the B-fields In STar forming Regions Observations (BISTRO) large program on the James Clerk Maxwell Telescope (JCMT). These data reveal a well-structured non-uniform magnetic field in the NGC 2264C and 2264D regions with a prevailing orientation around 30 deg from north to east. Field strengths estimates and a virial analysis for the major clumps indicate that NGC 2264C is globally dominated by gravity while in 2264D magnetic, gravitational, and kinetic energies are roughly balanced. We present an analysis scheme that utilizes the locally resolved magnetic field structures, together with the locally measured gravitational vector field and the extracted filamentary network. From this, we infer statistical trends showing that this network consists of two main groups of filaments oriented approximately perpendicular to one another. Additionally, gravity shows one dominating converging direction that is roughly perpendicular to one of the filament orientations, which is suggestive of mass accretion along this direction. Beyond these statistical trends, we identify two types of filaments. The type-I filament is perpendicular to the magnetic field with local gravity transitioning from parallel to perpendicular to the magnetic field from the outside to the filament ridge. The type-II filament is parallel to the magnetic field and local gravity. We interpret these two types of filaments as originating from the competition between radial collapsing, driven by filament self-gravity, and the longitudinal collapsing, driven by the region's global gravity.

astro-ph.SR↗

arXiv2023

How do supernova remnants cool? -- I. Morphology, optical emission lines, and shocks

Supernovae (SNe) inject $\sim 10^{51}$ erg in the interstellar medium, thereby shocking and heating the gas. A substantial fraction of this energy is later lost via radiative cooling. We present a post-processing module for the FLASH code to calculate the cooling radiation from shock-heated gas using collisional excitation data from MAPPINGS V. When applying this tool to a simulated SN remnant (SNR), we find that most energy is emitted in the EUV. However, optical emission lines ($[$O III$]$, $[$N II$]$, $[$S II$]$, H$α$, H$β$) are usually best observable. Our shock detection scheme shows that [S II] and [N II] emissions arise from the thin shell surrounding the SNR, while [O III], H$\rm α$, and H$\rm β$ originate from the volume-filling hot gas inside the SNR bubble. We find that the optical emission lines are affected by the SNR's complex structure and its projection onto the plane of the sky because the escaping line luminosity can be reduced by 10 -- 80\% due to absorption along the line-of-sight. Additionally, the subtraction of contaminating background radiation is required for the correct classification of an SNR on the oxygen or sulphur BPT diagrams. The electron temperature and density obtained from our synthetic observations match well with the simulation but are very sensitive to the assumed metallicity.

astro-ph.HE↗

arXiv2023

From Bubbles and Filaments to Cores and Disks: Gas Gathering and Growth of Structure Leading to the Formation of Stellar Systems

The study of the development of structures on multiple scales in the cold interstellar medium has experienced rapid expansion in the past decade, on both the observational and the theoretical front. Spectral line studies at (sub-)millimeter wavelengths over a wide range of physical scales have provided unique probes of the kinematics of dense gas in star-forming regions, and have been complemented by extensive, high dynamic range dust continuum surveys of the column density structure of molecular cloud complexes, while dust polarization maps have highlighted the role of magnetic fields. This has been accompanied by increasingly sophisticated numerical simulations including new physics (e.g., supernova driving, cosmic rays, non-ideal magneto-hydrodynamics, radiation pressure) and new techniques such as zoom-in simulations allowing multi-scale studies. Taken together, these new data have emphasized the anisotropic growth of dense structures on all scales, from giant ISM bubbles driven by stellar feedback on $\sim$50-100 pc scales through parsec-scale molecular filaments down to $<$0.1 pc dense cores and $<$1000 au protostellar disks. Combining observations and theory, we present a coherent picture for the formation and evolution of these structures and synthesize a comprehensive physical scenario for the initial conditions and early stages of star and disk formation.

astro-ph.GA↗

arXiv2022

RJ-plots: An improved method to classify structures objectively

The interstellar medium is highly structured, presenting a range of morphologies across spatial scales. The large data sets resulting from observational surveys and state-of-the-art simulations studying these hierarchical structures means that identification and classification must be done in an automated fashion to be efficient. Here we present RJ-plots, an improved version of the automated morphological classification technique J-plots developed by Jaffa et al. (2018). This method allows clear distinctions between quasi-circular/elongated structures and centrally over/under-dense structures. We use the recent morphological SEDIGISM catalogue of Neralwar et al. (2022) to show the improvement in classification resulting from RJ-plots, especially for ring-like and concentrated cloud types. We also find a strong correlation between the central concentration of a structure and its star formation efficiency and dense gas fraction, as well as a lack of correlation with elongation. Furthermore, we use the accreting filament simulations of Clarke et al. (2020) to highlight a multi-scale application of RJ-plots, finding that while spherical structures become more common at smaller scales they are never the dominant structure down to $r\sim0.03$ pc.

astro-ph.GA↗

arXiv2021

Synthetic CO emission and the $X_{\rm CO}$ factor of young molecular clouds: a convergence study

The properties of synthetic CO emission from 3D simulations of forming molecular clouds are studied within the SILCC-Zoom project. Since the time scales of cloud evolution and molecule formation are comparable, the simulations include a live chemical network. Two sets of simulations with an increasing spatial resolution (d$x=3.9$ pc to d$x=0.06$ pc) are used to investigate the convergence of the synthetic CO emission, which is computed by post-processing the simulation data with the RADMC-3D radiative transfer code. To determine the excitation conditions, it is necessary to include atomic hydrogen and helium alongside H$_2$, which increases the resulting CO emission by ~7-26 per cent. Combining the brightness temperature of $^{12}$CO and $^{13}$CO, we compare different methods to estimate the excitation temperature, the optical depth of the CO line and hence, the CO column density. An intensity-weighted average excitation temperature results in the most accurate estimate of the total CO mass. When the pixel-based excitation temperature is used to calculate the CO mass, it is over-/underestimated at low/high CO column densities where the assumption that $^{12}$CO is optically thick while $^{13}$CO is optically thin is not valid. Further, in order to obtain a converged total CO luminosity and hence <$X_{\rm CO}$> factor, the 3D simulation must have d$x\lesssim0.1$ pc. The <$X_{\rm CO}$> evolves over time and differs for the two clouds; yet pronounced differences with numerical resolution are found. Since high column density regions with a visual extinction larger than 3~mag are not resolved for d$x\gtrsim 1$~pc, in this case the H$_2$ mass and CO luminosity both differ significantly from the higher resolution results and the local $X_{\rm CO}$ is subject to strong noise. Our calculations suggest that synthetic CO emission maps are only converged for simulations with d$x\lesssim 0.1$ pc.

astro-ph.GA↗

arXiv2016

Perturbation growth in accreting filaments

We use smoothed particle hydrodynamic simulations to investigate the growth of perturbations in infinitely long, initially sub-critical but accreting filaments. The growth of these perturbations leads to filament fragmentation and the formation of cores. Most previous work on this subject has been confined to the growth and fragmentation of equilibrium filaments and has found that there exists a preferential fragmentation length scale which is roughly 4 times the filament's diameter. Our results show a more complicated dispersion relation with a series of peaks linking perturbation wavelength and growth rate. These are due to gravo-acoustic oscillations along the longitudinal axis during the sub-critical phase of growth. The positions of the peaks in growth rate have a strong dependence on both the mass accretion rate onto the filament and the temperature of the gas. When seeded with a multi-wavelength density power spectrum there exists a clear preferred core separation equal to the largest peak in the dispersion relation. Our results allow one to estimate a minimum age for a filament which is breaking up into regularly spaced fragments, as well as a maximum accretion rate. We apply the model to observations of filaments in Taurus by Tafalla & Hacar (2015) and find accretion rates consistent with those estimated by Palmeirim et al. (2013).

astro-ph.GA↗

arXiv2015

Investigating the Global Collapse of Filaments Using Smoothed Particle Hydrodynamics

We use Smoothed Particle Hydrodynamic simulations of cold, uniform density, self-gravitating filaments, to investigate their longitudinal collapse timescales; these timescales are important because they determine the time available for a filament to fragment into cores. A filament is initially characterised by its line-mass, $μ$, its radius, $R$ (or equivalently its density $ρ\!=\!μ/πR^2$), and its aspect ratio, $A\;\,(\equiv Z/R$, where $Z$ is its half-length). The gas is only allowed to contract longitudinally, i.e. parallel to the symmetry axis of the filament (the $z$-axis). Pon et al. (2012) have considered the global dynamics of such filaments analytically. They conclude that short filaments ($A\! < \!5$) collapse along the $z$-axis more-or-less homologously, on a time-scale $t_{_{\rm HOM}} \sim 0.44\,A\,(Gρ)^{-1/2}$; in contrast, longer filaments ($A\! > \!5$) undergo end-dominated collapse, i.e. two dense clumps form at the ends of the filament and converge on the centre sweeping up mass as they go, on a time-scale $t_{_{\rm END}} \sim 0.98\,A^{1/2}\,(Gρ)^{-1/2}$. Our simulations do not corroborate these predictions. First, for all $A\! > \!2$, the collapse time satisfies a single equation \[t_{_{\rm COL}}\;\sim\;(0.49+0.26A)(Gρ)^{-1/2}\,,\] which for large $A$ is much longer than the Pon et al. prediction. Second, for all $A\! > \!2$, the collapse is end-dominated. Third, before being swept up, the gas immediately ahead of an end-clump is actually accelerated outwards by the gravitational attraction of the approaching clump, resulting in a significant ram pressure. For high aspect ratio filaments the end-clumps approach an asymptotic inward speed, due to the fact that they are doing work both accelerating and compressing the gas they sweep up. Pon et al. appear to have neglected the outward acceleration and its consequences.

astro-ph.SR↗