arXiv subjects

Sebastiaan Paul Mulders

Publications and source records attributed to Sebastiaan Paul Mulders.

4 recordsLinked to original sources

arXiv2022

A Switching Thrust Tracking Controller for Load Constrained Wind Turbines

Wind turbines are prone to structural degradation, particularly in offshore locations. Based on the structural health condition of the tower, power de-rating strategies can be used to reduce structural loads at the cost of power losses.This paper introduces a novel closed-loop switching control architecture to constrain the thrust in individual turbines. By taking inspiration from developments in the field of reference governors, an existing demanded power tracking controller is extended by a thrust tracking controller. The latter is activated only when a user-defined constraint on fore-aft thrust force is exceeded, which can be set based on the actual damage status of the turbine. Having a down-regulation with monotonic aerodynamic load response, a simple linear thrust tracking controller is proposed. Such a scheme can reduce aerodynamic loads while incurring acceptable losses on power production which, in a wind farm setting, can be compensated for by other turbines. Large eddy simulations demonstrate the performance of the proposed scheme on satisfying thrust constraints.

eess.SY↗

arXiv2020

The helix approach: using dynamic individual pitch control to enhance wake mixing in wind farms

Wind farm control using dynamic concepts is a research topic that is receiving an increasing amount of interest. The main concept of this approach is that dynamic variations of the wind turbine control settings lead to higher wake turbulence, and subsequently faster wake recovery due to increased mixing. As a result, downstream turbines experience higher wind speeds, thus increasing their energy capture. The current state of the art in dynamic wind farm control is to vary the magnitude of the thrust force of an upstream turbine. Although very effective, this approach also leads to increased power and thrust variations, negatively impacting energy quality and fatigue loading. In this paper, a novel approach for the dynamic control of wind turbines in a wind farm is proposed: using individual pitch control, the fixed-frame tilt and yaw moments on the turbine are varied, thus dynamically manipulating the wake. This strategy is named the helix approach since the resulting wake has a helical shape. Large eddy simulations of a two-turbine wind farm show that the helix approach leads to enhanced wake mixing with minimal power and thrust variations.

eess.SY↗

arXiv2020

Preventing wind turbine tower natural frequency excitation with a quasi-LPV model predictive control scheme

With the ever increasing power rates of wind turbines, more advanced control techniques are needed to facilitate tall towers that are low-weight and cost effective, but in effect more flexible. Such soft-soft tower configurations generally have their fundamental side-side frequency in the below-rated operational domain. Because the turbine rotor practically has or develops a mass imbalance over time, a periodic and rotor-speed dependent side-side excitation is present during below-rated operation. Persistent operation at the coinciding tower and rotational frequency degrades the expected structural life span. To reduce this effect, earlier work has shown the effectiveness of active tower damping control strategies using collective pitch control. A more passive approach is frequency skipping by inclusion of speed exclusion zones, which avoids prolonged operation near the critical frequency. However, neither of the methods incorporate a convenient way of performing a trade-off between energy maximization and fatigue load minimization. Therefore, this paper introduces a quasi-linear parameter varying model predictive control (qLPV-MPC) scheme, exploiting the beneficial (convex) properties of a qLPV system description. The qLPV model is obtained by a demodulation transformation, and is subsequently augmented with a simple wind turbine model. Results show the effectiveness of the algorithm in synthetic and realistic simulations using the NREL 5-MW reference wind turbine in high-fidelity simulation code. Prolonged rotor speed operation at the tower side-side natural frequency is prevented, whereas when the trade-off is in favor of energy production, the algorithm decides to rapidly pass over the natural frequency to attain higher rotor speeds and power productions.

eess.SY↗

arXiv2018

Analysis and optimal individual pitch control decoupling by inclusion of an azimuth offset in the multi-blade coordinate transformation

With the trend of increasing wind turbine rotor diameters, the mitigation of blade fatigue loadings is of special interest to extend the turbine lifetime. Fatigue load reductions can be partly accomplished using Individual Pitch Control (IPC) facilitated by the so-called Multi-Blade Coordinate (MBC) transformation. This operation transforms and decouples the blade load signals in a yaw- and tilt-axis. However, in practical scenarios, the resulting transformed system still shows coupling between the axes, posing a need for more advanced Multiple-Input Multiple-Output (MIMO) control architectures. This paper presents a novel analysis and design framework for decoupling of the non-rotating axes by the inclusion of an azimuth offset in the reverse MBC transformation, enabling the application of simple Single-Input Single-Output (SISO) controllers. A thorough analysis is given by including the azimuth offset in a frequency-domain representation. The result is evaluated on simplified blade models, as well as linearizations obtained from the NREL~5\nobreakdash-MW reference wind turbine. A sensitivity and decoupling assessment justify the application of decentralized SISO control loops for IPC. Furthermore, closed-loop high-fidelity simulations show beneficial effects on pitch actuation and blade fatigue load reductions.

eess.SY↗