arXiv subjects

Sebastiaan Y. Haffert

Publications and source records attributed to Sebastiaan Y. Haffert.

At least 55 records · Page 3Linked to original sources

arXiv2024

Into nonlinearity and beyond for Zernike-like wavefront sensors

Context: Telescopes like the Extremely Large Telescope (ELT) and the Giant Magellan Telescope (GMT) will be used together with extreme adaptive optics (AO) instruments to directly image Earth-like planets. The AO systems will need to perform at the fundamental limit in order to image Earth twins. A crucial component is the wavefront sensor. Interferometric wavefront sensors, such as the Zernike wavefront sensor (ZWFS), have been shown to perform close to the fundamental sensitivity limit. However, sensitivity comes at the cost of linearity; the ZWFS has strong nonlinear behavior. Aims: The aim of this work is to increase the dynamic range of Zernike-like wavefront sensors by using nonlinear reconstruction algorithms combined with phase sorting interferometry (PSI) and multi-wavelength measurements. Methods: The response of the ZWFS is explored analytically and numerically. Results: The proposed iterative (non)linear reconstructors reach the machine precision for small aberrations (<0.25 rad rms). Coupling the nonlinear reconstruction algorithm with PSI increases the dynamic range of the ZWFS by a factor of three to about 0.75 rad rms. Adding multiple wavebands doubles the dynamic range again, to 1.4 radians rms. Conclusion: The ZWFS is one of the most sensitive wavefront sensors, but has a limited dynamic range. The ZWFS will be an ideal second-stage wavefront sensor if it is combined with the proposed nonlinear reconstruction algorithm.

astro-ph.IM↗

arXiv2023

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.

astro-ph.IM↗

arXiv2023

Approaches to lowering the cost of large space telescopes

New development approaches, including launch vehicles and advances in sensors, computing, and software, have lowered the cost of entry into space, and have enabled a revolution in low-cost, high-risk Small Satellite (SmallSat) missions. To bring about a similar transformation in larger space telescopes, it is necessary to reconsider the full paradigm of space observatories. Here we will review the history of space telescope development and cost drivers, and describe an example conceptual design for a low cost 6.5 m optical telescope to enable new science when operated in space at room temperature. It uses a monolithic primary mirror of borosilicate glass, drawing on lessons and tools from decades of experience with ground-based observatories and instruments, as well as flagship space missions. It takes advantage, as do large launch vehicles, of increased computing power and space-worthy commercial electronics in low-cost active predictive control systems to maintain stability. We will describe an approach that incorporates science and trade study results that address driving requirements such as integration and testing costs, reliability, spacecraft jitter, and wavefront stability in this new risk-tolerant "LargeSat" context.

astro-ph.IM↗

arXiv2023

GMagAO-X: A First Light Coronagraphic Adaptive Optics System for the GMT

GMagAO-X is a visible to NIR extreme adaptive optics (ExAO) system that will be used at first light for the Giant Magellan Telescope (GMT). GMagAO-X is designed to deliver diffraction-limited performance at visible and NIR wavelengths (6 to 10 mas) and contrasts on the order of $10^{-7}$. The primary science case of GMagAO-X will be the characterization of mature, and potentially habitable, exoplanets in reflected light. GMagAO-X employs a woofer-tweeter system and includes segment phasing control. The tweeter is a 21,000 actuator segmented deformable mirror (DM), composed of seven individual 3,000 actuator DMs. This new ExAO framework of seven DMs working in parallel to produce a 21,000 actuator DM significantly surpasses any current or near future actuator count for a monolithic DM architecture. Bootstrapping, phasing, and high order sensing are enabled by a multi-stage wavefront sensing system. GMT's unprecedented 25.4 m aperture composed of seven segments brings a new challenge of co-phasing massive mirrors to 1/100th of a wavelength. The primary mirror segments of the GMT are separated by large >30 cm gaps so there will be fluctuations in optical path length (piston) across the pupil due to vibration of the segments, atmospheric conditions, etc. We have developed the High Contrast Adaptive-optics Testbed (HCAT) to test new wavefront sensing and control approaches for GMT and GMagAO-X, such as the holographic dispersed fringe sensor (HDFS), and the new ExAO parallel DM concept for correcting aberrations across a segmented pupil. The CoDR for GMagAO-X was held in September 2021 and a preliminary design review is planned for early 2024. In this paper we will discuss the science cases and requirements for the overall architecture of GMagAO-X, as well as the current efforts to prototype the novel hardware components and new wavefront sensing and control concepts for GMagAO-X on HCAT.

astro-ph.IM↗

arXiv2023

Reaching the fundamental sensitivity limit of wavefront sensing on arbitrary apertures with the Phase Induced Amplitude Apodized Zernike Wavefront Sensor (PIAA-ZWFS)

In the last two decades many people have been searching for the optimal wavefront sensor as it can boost the performance of high-contrast imagining by orders of magnitude on the ELTs. According classical information theory, the optimal sensitivity of a wavefront sensor is 1/2 radian rms per photon. We show that classical limit is also the quantum metrology limit for starlight, which means that 1/2 radian rms per photon is really the limit. This proceeding introduces the Phase Induced Amplitude Apodized Zernike Wavefront sensor. The PIAA-ZWFS modifies a standard ZWFS with a set of aspheric lenses to increase its sensitivity. The optimized system reaches the fundamental limit for all spatial frequencies >1.7 cycles/pupil and is very close to the limit for the spatial frequencies <1.7 cycles/pupil. The PIAA-ZWFS can be seamlessly integrated with the PIAA-CMC coronagraphy. This makes the PIAA-ZWFS an ideal candidate as wavefront sensor for high-contrast imaging.

astro-ph.IM↗

arXiv2023

Integrated coronagraphy and wavefront sensing with the PIAACMC

Uncorrected wavefront errors create speckle noise in high-contrast observations at small inner-working angles. These speckles can be sensed and controlled by using coronagraph integrated wavefront sensors. Here, we will present how the Phase Induced Amplitude Apodized Complex Mask Corongraph (PIAACMC) can be integrated with both a Self-Coherent Camera (SCC) for focal plane wavefront sensing and an extremely sensitivity high-order pupil plane Zernike wavefront sensor (ZWFS). Non-common path aberrations can be completely erased by integrating both sensors into the PIAACMC, which is of extremely high importance in high-contrast imaging.

astro-ph.IM↗

arXiv2023

Using the Gerchberg-Saxton algorithm to reconstruct non-modulated pyramid wavefront sensor measurements

Adaptive optics (AO) is a technique to improve the resolution of ground-based telescopes by correcting, in real-time, optical aberrations due to atmospheric turbulence and the telescope itself. With the rise of Giant Segmented Mirror Telescopes (GSMT), AO is needed more than ever to reach the full potential of these future observatories. One of the main performance drivers of an AO system is the wavefront sensing operation, consisting of measuring the shape of the above mentioned optical aberrations. Aims. The non-modulated pyramid wavefront sensor (nPWFS) is a wavefront sensor with high sensitivity, allowing the limits of AO systems to be pushed. The high sensitivity comes at the expense of its dynamic range, which makes it a highly non-linear sensor. We propose here a novel way to invert nPWFS signals by using the principle of reciprocity of light propagation and the Gerchberg-Saxton (GS) algorithm. We test the performance of this reconstructor in two steps: the technique is first implemented in simulations, where some of its basic properties are studied. Then, the GS reconstructor is tested on the Santa Cruz Extreme Adaptive optics Laboratory (SEAL) testbed located at the University of California Santa Cruz. This new way to invert the nPWFS measurements allows us to drastically increase the dynamic range of the reconstruction for the nPWFS, pushing the dynamics close to a modulated PWFS. The reconstructor is an iterative algorithm requiring heavy computational burden, which could be an issue for real-time purposes in its current implementation. However, this new reconstructor could still be helpful in the case of many wavefront control operations. This reconstruction technique has also been successfully tested on the Santa Cruz Extreme AO Laboratory (SEAL) bench where it is now used as the standard way to invert nPWFS signal.

astro-ph.IM↗

arXiv2023

Integrated photonic-based coronagraphic systems for future space telescopes

The detection and characterization of Earth-like exoplanets around Sun-like stars is a primary science motivation for the Habitable Worlds Observatory. However, the current best technology is not yet advanced enough to reach the 10^-10 contrasts at close angular separations and at the same time remain insensitive to low-order aberrations, as would be required to achieve high-contrast imaging of exo-Earths. Photonic technologies could fill this gap, potentially doubling exo-Earth yield. We review current work on photonic coronagraphs and investigate the potential of hybridized designs which combine both classical coronagraph designs and photonic technologies into a single optical system. We present two possible systems. First, a hybrid solution which splits the field of view spatially such that the photonics handle light within the inner working angle and a conventional coronagraph that suppresses starlight outside it. Second, a hybrid solution where the conventional coronagraph and photonics operate in series, complementing each other and thereby loosening requirements on each subsystem. As photonic technologies continue to advance, a hybrid or fully photonic coronagraph holds great potential for future exoplanet imaging from space.

astro-ph.IM↗

arXiv2023

Estimation of polarization aberrations and their effect on the coronagraphic performance for future space telescopes

A major goal of proposed future space observatories, such as the Habitable World Observatory, is to directly image and characterize Earth-like planets around Sun-like stars to search for habitability signatures requiring the starlight suppression (contrast) of 1e-10. One of the significant aspects affecting this contrast is the polarization aberrations generated from the reflection from mirror surfaces. The polarization aberrations are the phase-dependent amplitude and phase patterns originating from the Fresnel reflections of the mirror surfaces. These aberrations depend on the angle of incidence and coating parameters of the surface. This paper simulates the polarization aberrations for an on-axis and off-axis TMA telescope of a 6.5 m monolithic primary mirror. We analyze the polarization aberrations and their effect on the coronagraphic performance for eight different recipes of mirror coatings for Astronomical filter bands g-I: three single-layer metal coatings and five recipes of protective coatings. First, the Jones pupils are estimated for each coating and filter band using the polarization ray tracing in Zemax. Then, we propagate these Jones pupils through a Vector Vortex Coronagraph and Perfect Coronagraphs using hcipy, a physical optics-based simulation framework. The analysis shows that the two main polarization aberrations generated from the four mirrors are the retardance-defocus and retardance-tilt. The simulations also show that the coating plays a significant role in determining the strength of the aberrations. The bare/oxi-aluminum and Al+18nm LiF coating outperforms all the other coatings by one order of magnitude.

astro-ph.IM↗

arXiv2023

Laboratory demonstration of the triple-grating vector vortex coronagraph

The future Habitable Worlds Observatory aims to characterize the atmospheres of rocky exoplanets around solar-type stars. The vector vortex coronagraph (VVC) is a main candidate to reach the required contrast of $10^{-10}$. However, the VVC requires polarization filtering and every observing band requires a different VVC. The triple-grating vector vortex coronagraph (tgVVC) aims to mitigate these limitations by combining multiple gratings that minimize the polarization leakage over a large spectral bandwidth. In this paper, we present laboratory results of a tgVVC prototype using the In-Air Coronagraphic Testbed (IACT) facility at NASA's Jet Propulsion Laboratory and the Space Coronagraph Optical Bench (SCoOB) at the University of Arizona Space Astrophysics Lab (UASAL). We study the coronagraphic performance with polarization filtering at 633 nm and reach a similar average contrast of $2 \times 10^{-8}$ between 3-18 $λ/D$ at the IACT, and $6 \times 10^{-8}$ between 3-14 $λ/D$ at SCoOB. We explore the limitations of the tgVVC by comparing the testbed results. We report on other manufacturing errors and ways to mitigate their impact.

astro-ph.IM↗

arXiv2023

Visible extreme adaptive optics on extremely large telescopes: Towards detecting oxygen in Proxima Centauri b and analogs

Looking to the future of exo-Earth imaging from the ground, core technology developments are required in visible extreme adaptive optics (ExAO) to enable the observation of atmospheric features such as oxygen on rocky planets in visible light. UNDERGROUND (Ultra-fast AO techNology Determination for Exoplanet imageRs from the GROUND), a collaboration built in Feb. 2023 at the Optimal Exoplanet Imagers Lorentz Workshop, aims to (1) motivate oxygen detection in Proxima Centauri b and analogs as an informative science case for high-contrast imaging and direct spectroscopy, (2) overview the state of the field with respect to visible exoplanet imagers, and (3) set the instrumental requirements to achieve this goal and identify what key technologies require further development.

astro-ph.EP↗

arXiv2023

MagAO-X and HST high-contrast imaging of the AS209 disk at H$α$

The detection of emission lines associated with accretion processes is a direct method for studying how and where gas giant planets form, how young planets interact with their natal protoplanetary disk and how volatile delivery to their atmosphere takes place. H$α$ ($λ=0.656\,μ$m) is expected to be the strongest accretion line observable from the ground with adaptive optics systems, and is therefore the target of specific high-contrast imaging campaigns. We present MagAO-X and HST data obtained to search for H$α$ emission from the previously detected protoplanet candidate orbiting AS209, identified through ALMA observations. No signal was detected at the location of the candidate, and we provide limits on its accretion. Our data would have detected an H$α$ emission with $F_\mathrm{Hα}>2.5\pm0.3 \times10^{-16}$ erg s$^{-1}$ cm$^{-2}$, a factor 6.5 lower than the HST flux measured for PDS70b (Zhou et al., 2021). The flux limit indicates that if the protoplanet is currently accreting it is likely that local extinction from circumstellar and circumplanetary material strongly attenuates its emission at optical wavelengths. In addition, the data reveal the first image of the jet north of the star as expected from previous detections of forbidden lines. Finally, this work demonstrates that current ground-based observations with extreme adaptive optics systems can be more sensitive than space-based observations, paving the way to the hunt for small planets in reflected light with extremely large telescopes.

astro-ph.EP↗

arXiv2023

Chasing rainbows and ocean glints: Inner working angle constraints for the Habitable Worlds Observatory

NASA is engaged in planning for a Habitable Worlds Observatory (HabWorlds), a coronagraphic space mission to detect rocky planets in habitable zones and establish their habitability. Surface liquid water is central to the definition of planetary habitability. Photometric and polarimetric phase curves of starlight reflected by an exoplanet can reveal ocean glint, rainbows and other phenomena caused by scattering by clouds or atmospheric gas. Direct imaging missions are optimised for planets near quadrature, but HabWorlds' coronagraph may obscure the phase angles where such optical features are strongest. The range of accessible phase angles for a given exoplanet will depend on the planet's orbital inclination and/or the coronagraph's inner working angle (IWA). We use a recently-created catalog relevant to HabWorlds of 164 stars to estimate the number of exo-Earths that could be searched for ocean glint, rainbows, and polarization effects due to Rayleigh scattering. We find that the polarimetric Rayleigh scattering peak is accessible in most of the exo-Earth planetary systems. The rainbow due to water clouds at phase angles of ${\sim}20-60^\circ$ would be accessible with HabWorlds for a planet with an Earth equivalent instellation in ${\sim}{46}$ systems, while the ocean glint signature at phase angles of ${\sim}130-170^\circ$ would be accessible in ${\sim}{16}$ systems, assuming an IWA${=}62$ mas ($3λ/D$). Improving the IWA${=}41$ mas ($2λ/D$) increases accessibility to rainbows and glints by factors of approximately 2 and 3, respectively. By observing these scattering features, HabWorlds could detect a surface ocean and water cycle, key indicators of habitability.

astro-ph.EP↗

arXiv2023

High-resolution [O I] line spectral mapping of TW Hya supportive of a magnetothermal wind

Disk winds are thought to play a critical role in the evolution and dispersal of protoplanetary disks. A primary diagnostic of this physics is emission from the wind, especially in the low-velocity component of the [O I] $\lambda6300$ line. However, the interpretation of the line is usually based on spectroscopy alone, which leads to confusion between magnetohydrodynamic winds and photoevaporative winds. Here we report that in high-resolution spectral mapping of TW Hya by the multi-unit spectroscopic explorer at the Very Large Telescope, 80% of the [O I] emission is confined to within 1 AU radially from the star. A generic model of a magnetothermal wind produces [O I] emission at the base of the wind that broadly matches the flux and the observed spatial and spectral profiles. The emission at large radii is much fainter that predicted from models of photoevaporation, perhaps because the magnetothermal wind partially shields the outer disk from energetic radiation from the central star. This result calls into question the previously assessed importance of photoevaporation in disk dispersal predicted by models.

astro-ph.SR↗

arXiv2023

Polarization aberrations in next-generation giant segmented mirror telescopes (GSMTs) I. Effect on the coronagraphic performance

Next-generation large segmented mirror telescopes are expected to perform direct imaging and characterization of Earth-like rocky planets, which requires contrast limits of $10^{-7}$ to $10^{-8}$ at wavelengths from I to J band. One critical aspect affecting the raw on-sky contrast are polarization aberrations arising from the reflection from the telescope's mirror surfaces and instrument optics. We simulate the polarization aberrations and estimate their effect on the achievable contrast for three next-generation ground-based large segmented mirror telescopes. We performed ray-tracing in Zemax and computed the polarization aberrations and Jones pupil maps using the polarization ray-tracing algorithm. The impact of these aberrations on the contrast is estimated by propagating the Jones pupil maps through a set of idealized coronagraphs using hcipy, a physical optics-based simulation framework. The optical modeling of the giant segmented mirror telescopes (GSMTs) shows that polarization aberrations create significant leakage through a coronagraphic system. The dominant aberration is retardance defocus, which originates from the steep angles on the primary and secondary mirrors. The retardance defocus limits the contrast to $10^{-5}$ to $10^{-4}$ at 1 $λ/D$ at visible wavelengths, and $10^{-5}$ to $10^{-6}$ at infrared wavelengths. The simulations also show that the coating plays a major role in determining the strength of the aberrations. Polarization aberrations will need to be considered during the design of high-contrast imaging instruments for the next generation of extremely large telescopes. This can be achieved either through compensation optics, robust coronagraphs, specialized coatings, calibration, and data analysis approaches or by incorporating polarimetry with high-contrast imaging to measure these effects.

astro-ph.IM↗

arXiv2023

HIP 67506 C: MagAO-X Confirmation of a New Low-Mass Stellar Companion to HIP 67506 A

We report the confirmation of HIP 67506 C, a new stellar companion to HIP 67506 A. We previously reported a candidate signal at 2$λ$/D (240~mas) in L$^{\prime}$ in MagAO/Clio imaging using the binary differential imaging technique. Several additional indirect signals showed that the candidate signal merited follow-up: significant astrometric acceleration in Gaia DR3, Hipparcos-Gaia proper motion anomaly, and overluminosity compared to single main sequence stars. We confirmed the companion, HIP 67506 C, at 0.1" with MagAO-X in April, 2022. We characterized HIP 67506 C MagAO-X photometry and astrometry, and estimated spectral type K7-M2; we also re-evaluated HIP 67506 A in light of the close companion. Additionally we show that a previously identified 9" companion, HIP 67506 B, is a much further distant unassociated background star. We also discuss the utility of indirect signposts in identifying small inner working angle candidate companions.

astro-ph.SR↗

arXiv2023

Improved companion mass limits for Sirius A with thermal infrared coronagraphy using a vector-apodizing phase plate and time-domain starlight-subtraction techniques

We use observations with the infrared-optimized MagAO system and Clio camera in 3.9 $μ$m light to place stringent mass constraints on possible undetected companions to Sirius A. We suppress the light from Sirius A by imaging it through a grating vector-apodizing phase plate coronagraph with 180-degree dark region (gvAPP-180). To remove residual starlight in post-processing, we apply a time-domain principal-components-analysis-based algorithm we call PCA-Temporal (PCAT), which uses eigen-time-series rather than eigen-images to subtract starlight. By casting the problem in terms of eigen-time-series, we reduce the computational cost of post-processing the data, enabling the use of the fully sampled dataset for improved contrast at small separations. We also discuss the impact of retaining fine temporal sampling of the data on final contrast limits. We achieve post-processed contrast limits of $1.5 \times 10^{-6}$ to $9.8 \times 10^{-6}$ outside of 0.75 arcsec which correspond to planet masses of 2.6 to 8.0 $M_J$. These are combined with values from the recent literature of high-contrast imaging observations of Sirius to synthesize an overall completeness fraction as a function of mass and separation. After synthesizing these recent studies and our results, the final completeness analysis rules out 99% of $\ge 9 \ M_J$ planets from 2.5-7 AU.

astro-ph.EP↗

arXiv2022

Experimental Trials With The Optical Differentiation Wavefront Sensor For Extended Objects

Commonly used wavefront sensors, the Shack Hartmann wavefront sensor and the pyramid wavefront sensor, for example, have large dynamic range or high sensitivity, trading one regime for the other. A new type of wavefront sensor is being developed and is currently undergoing testing at the University of Arizona's Center for Astronomical Adaptive Optics. This sensor builds on linear optical differentiation theory by using linear, spatially varying halfwave plates in an intermediate focal plane. These filters, along with the polarizing beam splitters, divide the beam into four pupil images, similar to those produced by the pyramid wavefront sensor. The wavefront is then reconstructed from the local wavefront slope information contained in these images. The ODWFS is ideally suited for wavefront sensing on extended objects because of its large dynamic range and because it operates in a pupil plane which allows for on chip resampling even for arbitrarily shaped sources. We have assembled the ODWFS on a testbed using 32 by 32 square 1000 actuator deformable mirror to introduce aberration into a simulated telescope beam. We are currently testing the system's spatial frequency response and are comparing the resulting data to numerical simulations. This paper presents the results of these initial experiments.

astro-ph.IM↗