arXiv subjects

Sebastian D. Proell

Publications and source records attributed to Sebastian D. Proell.

4 recordsLinked to original sources

arXiv2024

A highly efficient computational approach for part-scale microstructure predictions in Ti-6Al-4V additive manufacturing

Fast and efficient simulations of metal additive manufacturing (AM) processes are highly relevant to exploring the full potential of this promising manufacturing technique. The microstructure composition plays an important role in characterizing the part quality and deriving mechanical properties. When complete parts are simulated, one often needs to resort to strong simplifications such as layer-wise heating due to the large number of simulated time steps compared to the small time step sizes. This article proposes a scan-resolved approach to the coupled thermo-microstructural problem. Building on a highly efficient thermal model, we discuss the implementation of a phenomenological microstructure model for the evolution of the three main constituents of Ti-6Al-4V: stable $α_s$-phase, martensite $α_m$-phase and $β$-phase. The implementation is tailored to modern hardware features using vectorization and fast approximations of transcendental functions. A performance model and numerical examples verify the high degree of optimization. We demonstrate the applicability and predictive power of the approach and the influence of scan strategy and geometry. Depending on the specific example, results can be obtained with moderate computational resources in a few hours to days. The numerical examples include a prediction of the microstructure on the full NIST AM Benchmark cantilever specimen.

cs.CE↗

arXiv2023

A highly efficient computational framework for fast scan-resolved simulations of metal additive manufacturing processes on the scale of real parts

This article proposes a novel high-performance computing approach for the prediction of the temperature field in powder bed fusion (PBF) additive manufacturing processes. In contrast to many existing approaches to part-scale simulations, the underlying computational model consistently resolves physical scan tracks without additional heat source scaling, agglomeration strategies or any other heuristic modeling assumptions. A growing, adaptively refined mesh accurately captures all details of the laser beam motion. Critically, the fine spatial resolution required for resolved scan tracks in combination with the high scan velocities underlying these processes mandates the use of comparatively small time steps to resolve the underlying physics. Explicit time integration schemes are well-suited for this setting, while unconditionally stable implicit time integration schemes are employed for the interlayer cool down phase governed by significantly larger time scales. These two schemes are combined and implemented in an efficient fast operator evaluation framework providing significant performance gains and optimization opportunities. The capabilities of the novel framework are demonstrated through realistic AM examples on the centimeter scale including the first scan-resolved simulation of the entire NIST AM Benchmark cantilever specimen, with a computation time of less than one day. Apart from physical insights gained through these simulation examples, also numerical aspects are thoroughly studied on basis of weak and strong parallel scaling tests. As potential applications, the proposed thermal PBF simulation framework can serve as a basis for microstructure and thermo-mechanical predictions on the part-scale, but also to assess the influence of scan pattern and part geometry on melt pool shape and temperature, which are important indicators for well-known process instabilities.

cs.CE↗

arXiv2021

A simple yet consistent constitutive law and mortar-based layer coupling schemes for thermomechanical macroscale simulations of metal additive manufacturing processes

This article proposes a coupled thermomechanical finite element model tailored to the macroscale simulation of metal additive manufacturing processes such as selective laser melting. A first focus lies on the derivation of a consistent constitutive law on basis of a Voigt-type spatial homogenization procedure across the relevant phases, powder, melt and solid. The proposed constitutive law accounts for the irreversibility of phase change and consistently represents thermally induced residual stresses. In particular, the incorporation of a reference strain term, formulated in rate form, allows to consistently enforce a stress-free configuration for newly solidifying material at melt temperature. Application to elementary test cases demonstrates the validity of the proposed constitutive law and allows for a comparison with analytical and reference solutions. Moreover, these elementary solidification scenarios give detailed insights and foster understanding of basic mechanisms of residual stress generation in melting and solidification problems with localized, moving heat sources. As a second methodological aspect, dual mortar mesh tying strategies are proposed for the coupling of successively applied powder layers. This approach allows for very flexible mesh generation for complex geometries. As compared to collocation-type coupling schemes, e.g., based on hanging nodes, these mortar methods enforce the coupling conditions between non-matching meshes in an $L^2$-optimal manner. The combination of the proposed constitutive law and mortar mesh tying approach is validated on realistic three-dimensional examples, representing a first step towards part-scale predictions.

cs.CE↗

arXiv2020

On phase change and latent heat models in metal additive manufacturing process simulation

This work proposes an extension of phase change and latent heat models for the simulation of metal powder bed fusion additive manufacturing processes on the macroscale and compares different models with respect to accuracy and numerical efficiency. Specifically, a systematic formulation of phase fraction variables is proposed relying either on temperature- or enthalpy-based interpolation schemes. Moreover, two well-known schemes for the numerical treatment of latent heat, namely the apparent capacity and the so-called heat integration scheme, are critically reviewed and compared with respect to numerical efficiency and overall accuracy. Eventually, a novel variant of the heat integration scheme is proposed that allows to directly control efficiency and accuracy by means of a user-defined tolerance. Depending on the chosen tolerance, it is shown that this novel approach offers increased numerical efficiency for a given level of accuracy or improved accuracy for a given level of numerical efficiency as compared to the apparent capacity and the original heat integration scheme. The investigation and comparison of all considered schemes is based on a series of numerical test cases that are representative for application scenarios in metal powder bed fusion additive manufacturing.

cs.CE↗