SearcharxivSearch

arXiv subjects

Sebastian Heeg

Publications and source records attributed to Sebastian Heeg.

18 recordsLinked to original sources

Direct Realization of Near-Ideal Carbyne in Ultrathin Boron Nitride Nanotubes

Carbyne, the sp-hybridized one-dimensional allotrope of carbon, is predicted to be the stiffest known material, with electronic and optical properties set by a single structural parameter, the bond length alternation. However, its intrinsic properties have never been measured: chains synthesized through molecular chemistry carry endgroup and finite-length perturbations that persist even in the longest molecules available, while chains grown inside carbon nanotubes strongly couple to the host, which renormalizes their vibrational frequency by up to 110 cm$^{-1}$ in a diameter-dependent manner. Here, we show that encapsulating and thermally converting hydrogen-capped polyynes inside ultrathin boron nitride nanotubes, structural analogues of carbon nanotubes but electrically insulating, yields carbyne chains in a near-ideal regime, where endgroup, finite length, and host-guest perturbations are reduced to secondary effects. Statistical Raman spectroscopy across 245 locations returns a vibrational frequency distribution an order of magnitude narrower than in carbon nanotubes, an anharmonicity consistent with the universal law for carbyne-like materials, and a bond length alternation matching correlated calculations for the free chain. No photoluminescence is detected, despite the transparent host, as expected for the dipole-forbidden emission of an unperturbed carbyne chain. Boron nitride nanotubes give experimental access to carbyne in its near-ideal form.

cond-mat.mes-hall

The Topography Trap: Sifting Interlayer Excitons from Strain-Related Artifacts in Real-World 2D Hetrostructures

Novel excitonic phenomena emerging in transition metal dichalcogenide (TMDC) heterostructures belong to the most exciting topics in contemporary physics of van der Waals materials. Interlayer excitons (IXs) stand out among those due to their long radiative lifetimes and tunability by electric fields, strain, and twist angle. However, many ambiguities persist in the optical identification and manipulation of IXs, highlighting the need for reliable spectroscopic criteria that distinguish interlayer species from spurious signals. Here, we present a decision-tree protocol that evaluates interlayer coupling via intralayer exciton quenching and correlates photoluminescence (PL) with atomic force microscopy (AFM) to correctly assign room-temperature PL features in TMDC-based heterostructures. Applying this protocol, we identify momentum-direct IX between the K valleys of the two layers (KK-IX) in MoS2-MoSe2 and MoS2-WSe2 heterostructures at room temperature. In contrast, our protocol contests the reported bright, momentum-indirect, twist-angle-independent $\Gamma$K-IX in MoS2-WSe2. Comprehensive experimental data, including infrared and tip-enhanced photoluminescence (TEPL) with sub-diffraction-limited resolution, show no compelling evidence for this excitonic species, despite numerous reports. Instead, the spectroscopic features previously assigned to this $\Gamma$K-IX originate from locally strained WSe2 at topographical inhomogeneities of the heterostructure interface, underscoring the need for robust, spatially resolved characterization of real-world samples in this highly accessible field and providing a generally applicable framework for identifying interlayer excitons in 2D semiconductor heterostructures.

cond-mat.mes-hall

Strain engineering of valley-polarized hybrid excitons in a 2D semiconductor

Encoding and manipulating digital information in quantum degrees of freedom is one of the major challenges of today's science and technology. The valley indices of excitons in transition metal dichalcogenides (TMDs) are well-suited to address this challenge. Here, we demonstrate a new class of strain-tunable, valley-polarized hybrid excitons in monolayer TMDs, comprising a pair of energy-resonant intra- and intervalley excitons. These states combine the advantages of bright intravalley excitons, where the valley index directly couples to light polarization, and dark intervalley excitons, characterized by low depolarization rates. We demonstrate that the hybridized state of dark KK' intervalley and defect-localized excitons exhibits a degree of circular polarization of emitted photons that is three times higher than that of the constituent species. Moreover, a bright KK intravalley and a dark KQ exciton form a coherently coupled hybrid state under energetic resonance, with their valley depolarization dynamics slowed down a hundredfold. Overall, these valley-polarized hybrid excitons with strain-tunable valley character emerge as prime candidates for valleytronic applications in future quantum and information technology.

cond-mat.mes-hall

Universal Vibrational Anharmonicity in Carbyne-like Materials

Carbyne, an infinite linear chain of carbon atoms, is the truly one-dimensional allotrope of carbon. While ideal carbyne and its fundamental properties have remained elusive, carbyne-like materials like carbyne chains confined inside carbon nanotubes are available for study. Here, we probe the longitudinal optical phonon (C-mode) of confined carbyne chains by Raman spectroscopy up to the third overtone. We observe a strong vibrational anharmonicity that increases with decreasing C-mode frequency, reaching up to 8% for the third overtone. Moreover, we find that the relation between vibrational anharmonicity and C-mode frequency is universal to carbyne-like materials, including ideal carbyne. This establishes experimentally that carbyne and related materials have pronounced anharmonic potential landscapes which must be included in the theoretical description of their structure and properties.

cond-mat.mtrl-sci

Strain fingerprinting of exciton valley character

Momentum-indirect excitons composed of electrons and holes in different valleys define optoelectronic properties of many semiconductors, but are challenging to detect due to their weak coupling to light. The identification of an excitons' valley character is further limited by complexities associated with momentum-selective probes. Here, we study the photoluminescence of indirect excitons in controllably strained prototypical 2D semiconductors (WSe$_2$, WS$_2$) at cryogenic temperatures. We find that these excitons i) exhibit valley-specific energy shifts, enabling their valley fingerprinting, and ii) hybridize with bright excitons, becoming directly accessible to optical spectroscopy methods. This approach allows us to identify multiple previously inaccessible excitons with wavefunctions residing in K, $\Gamma$, or Q valleys in the momentum space as well as various types of defect-related excitons. Overall, our approach is well-suited to unravel and tune intervalley excitons in various semiconductors.

cond-mat.mes-hall

Surface-Sensitive Raman Scattering by Transferable Nanoporous Plasmonic Membranes

Raman spectroscopy is a powerful technique to characterize materials. It probes non-destructively chemical composition, crystallinity, defects, strain and coupling phenomena. However, the Raman response of surfaces or thin films is often weak and obscured by dominant bulk signals. Here we overcome this limitation by placing a transferable porous gold membrane (PAuM) on top of the surface of interest. Slot-like nanopores in the membrane act as plasmonic slot antennas and enhance the Raman response of the surface or thin film underneath. Simultaneously, the PAuM suppresses the penetration of the excitation laser into the bulk, efficiently blocking the bulk Raman signal. Using graphene as a model surface, we show that these two simultaneous effects lead to an increase in the surface-to-bulk Raman signal ratio by three orders of magnitude. We find that 90% of the Raman enhancement occurs within the top 2.5 of the material, demonstrating truly surface-sensitive Raman scattering. To validate our approach, we analyze the surface of a LaNiO3 thin film. We observe a Raman mode splitting for the LaNiO3 surface-layer, which is spectroscopic evidence that the surface structure differs from the bulk. This result underpins that PAuM give direct access to Raman signatures of surfaces and their structural properties.

cond-mat.mtrl-sci

Strain control of hybridization between dark and localized excitons in a 2D semiconductor

Mechanical strain is a powerful tuning knob for excitons, Coulomb-bound electron-hole complexes dominating optical properties of two-dimensional semiconductors. While the strain response of bright free excitons is broadly understood, the behavior of dark free excitons (long-lived excitations that generally do not couple to light due to spin and momentum conservation) or localized excitons related to defects remains mostly unexplored. Here, we develop a technique capable of straining pristine suspended WSe2 kept at cryogenic temperatures up to 3\% to study the strain behavior of these fragile many-body states. We find that under the application of strain, dark and localized excitons in monolayer WSe2 - a prototypical 2D semiconductor - are brought into energetic resonance, forming a new hybrid state that inherits the properties of the constituent species. The characteristics of the hybridized state, including an order-of-magnitude enhanced light/matter coupling, avoided-crossing energy shifts, and strain tunability of many-body interactions, are all supported by first-principles calculations. The hybridized exciton reported here may play a critical role in the operation of single quantum emitters based on WSe2. Furthermore, the techniques we developed may be used to fingerprint unidentified excitonic states

cond-mat.mtrl-sci

Freestanding and permeable nanoporous gold membranes for surface-enhanced Raman scattering

Surface-enhanced Raman spectroscopy (SERS) demands reliable, high enhancement substrates in order to be used in different fields of application. Here, we introduce freestanding porous gold membranes (PAuM) as easy to produce, scalable, mechanically stable, and effective SERS substrates. We fabricate large-scale sub-30 thick PAuM, that form freestanding membranes with varying morphologies depending on the nominal gold thickness. These PAuM are mechanically stable for pressures up to $>3$ bar, and exhibit surface-enhanced Raman scattering with local enhancement factors of $10^4$ to $10^5$, which we demonstrate by wavelength-dependent and spatially resolved Raman measurements using graphene as a local Raman probe. Numerical simulations reveal that the enhancement arises from individual, nanoscale pores in the membrane acting as optical slot antennas. Our PAuM are mechanically stable, provide robust SERS enhancement for excitation power densities up to $10^6$W$\,$cm$^{-2}$, and may find use as a building block in flow-through sensor applications based on SERS.

physics.optics

Raman Sideband Thermometry of Single Carbyne Chains

We demonstrate Raman sideband thermometry of single carbyne chains confined in double-walled carbon nanotubes. Our results show that carbyne's record-high Raman scattering cross section enables anti-Stokes Raman measurements at the single chain level. Using laser irradiation as a heating source, we exploit the temperature dependence of the anti-Stokes/Stokes ratio for local temperature sensing. Due to its molecular size and its large Raman cross section carbyne is an efficient probe for local temperature monitoring, with applications ranging from nanoelectronics to biology.

cond-mat.mes-hall

Tunable graphene phononic crystal

In the field of phononics, periodic patterning controls vibrations and thereby the flow of heat and sound in matter. Bandgaps arising in such phononic crystals realize low-dissipation vibrational modes and enable applications towards mechanical qubits, efficient waveguides, and state-of-the-art sensing. Here, we combine phononics and two-dimensional materials and explore the possibility of manipulating phononic crystals via applied mechanical pressure. To this end, we fabricate the thinnest possible phononic crystal from monolayer graphene and simulate its vibrational properties. We find a bandgap in the MHz regime, within which we localize a defect mode with a small effective mass of 0.72 ag = 0.002 $m_{physical}$. Finally, we take advantage of graphene's flexibility and mechanically tune a finite size phononic crystal. Under electrostatic pressure up to 30 kPa, we observe an upshift in frequency of the entire phononic system by more than 350%. At the same time, the defect mode stays within the bandgap and remains localized, suggesting a high-quality, dynamically tunable mechanical system.

cond-mat.mes-hall

In situ functionalization of graphene

While the basal plane of graphene is inert, defects in it are centers of chemical activity. An attractive application of such defects is towards controlled functionalization of graphene with foreign molecules. However, the interaction of the defects with reactive environment, such as ambient, decreases the efficiency of functionalization and makes it poorly controlled. Here, we report a novel approach to generate, monitor with time resolution, and functionalize the defects $\textit{in situ}$ without ever exposing them to the ambient. The defects are generated by an energetic Argon plasma and their properties are monitored using $\textit{in situ}$ Raman spectroscopy. We find that these defects are functional, very reactive, and strongly change their density from $\approx 1\cdot10^{13} cm^{-2}$ to $\approx 5\cdot10^{11} cm^{-2}$ upon exposure to air. We perform the proof of principle $\textit{in situ}$ functionalization by generating defects using the Argon plasma and functionalizing them $\textit{in situ}$ using Ammonia functional. The functionalization induces the n-doping with a carrier density up to $5\cdot10^{12} cm^{-2}$ in graphene and remains stable in ambient conditions.

cond-mat.mes-hall

Raman Scattering Cross Section of Confined Carbyne

We experimentally quantify the Raman scattering from individual carbyne chains confined in double-walled carbon nanotubes. We find that the resonant differential Raman cross section of confined carbyne is on the order of $10^{-22}$ cm$^{2}\,$sr$^{-1}$ per atom, making it the strongest Raman scatterer ever reported.

cond-mat.mes-hall

Beam steering with a nonlinear optical phased array antenna

Transition metal dichalcogenides (TMDCs) exhibit high second harmonic (SH) generation in the visible due to their non-centrosymmetric crystal structure in odd-layered form and direct bandgap transition when thinned down to a monolayer. In order to emit the SH radiation into a desired direction one requires a means to control the phase of the in-plane nonlinear polarization. Here, we couple the SH response of a monolayer MoS$_{\text{2}}$ to an optical phased array antenna and demonstrate controllable steering of the nonlinear emission. By exploiting the intrinsic SH generation by the phased array antenna we achieve uniform emission efficiency into a broad angular range. Our work has relevance for novel optoelectronic applications, such as programmable optical interconnects and on-chip LIDAR.

physics.optics

Probing hotspots of plasmon-enhanced Raman scattering by nanomanipulation of carbon nanotubes

We present a two-step procedure to probe hotspots of plasmon-enhanced Raman scattering with carbon nanotubes. Dielectrophoretic deposition places a small carbon nanotube bundle on top of plasmonic Au nanodimer. After 'pre-characterising' both the nanotubes and dimer structure, we subsequently use the tip of an AFM to push the bundle into the plasmonic hotspot located in the 25nm wide dimer gap, characterize its location inside the gap, and observe the onset of plasmon-enhanced Raman scattering. Evidence for the activation of the carbon nanotube's double-resonant D-mode by the near-field of the plasmonic hotspot is discussed.

cond-mat.mes-hall

Minimizing Residues and Strain in 2D Materials Transferred from PDMS

Integrating layered two-dimensional (2D) materials into 3D heterostructures offers opportunities for novel material functionalities and applications in electronics and photonics. In order to build the highest quality heterostructures, it is crucial to preserve the cleanliness and morphology of 2D material surfaces that come in contact with polymers such as PDMS during transfer. Here we report that substantial residues and up to ~0.22% compressive strain can be present in monolayer MoS$_{2}$ flakes transferred using PDMS. We show that a UV-ozone pre-cleaning of the PDMS surface before exfoliation significantly reduces organic residues on transferred MoS$_{2}$ flakes. An additional 200$^{\circ}$C vacuum anneal after transfer efficiently removes interfacial bubbles and wrinkles as well as accumulated strain, thereby restoring the surface morphology of transferred flakes to their native state. Our recipe is important for building clean heterostructures of 2D materials and increasing the reproducibility and reliability of devices based on them.

cond-mat.mtrl-sci

Carbon nanotube chirality determines properties of encapsulated linear carbon chain

Long linear carbon chains encapsulated inside carbon nanotubes are a very close realization of carbyne, the truly one-dimensional allotrope of carbon. Here we study individual pairs of double-walled carbon nanotubes and encapsulated linear carbon chains by tip-enhanced Raman scattering. We observe that the radial breathing mode of the inner nanotube correlates with the frequency of the carbon chain's Raman mode, revealing that the nanotube chirality determines the vibronic and electronic properties of the encapsulated carbon chain. We provide the missing link that connects the properties of the encapsulated long linear carbon chain with the structure of the host nanotube.

cond-mat.mes-hall

Evaluating arbitrary strain configurations and doping in graphene with Raman spectroscopy

Raman spectroscopy is a powerful tool for characterizing the local properties of graphene. Here, we introduce a method for evaluating unknown strain configurations and simultaneous doping. It relies on separating the effects of hydrostatic strain (peak shift) and shear strain (peak splitting) on the Raman spectrum of graphene. The peak shifts from hydrostatic strain and doping are separated with a correlation analysis of the 2D and G frequencies. This enables us to obtain the local hydrostatic strain, shear strain and doping without any assumption on the strain configuration prior to the analysis. We demonstrate our approach for two model cases: Graphene under uniaxial stress on a PMMA substrate and graphene suspended on nanostructures that induce an unknown strain configuration. We measured $ω_\mathrm{2D}/ω_\mathrm{G} = 2.21 \pm 0.05$ for pure hydrostatic strain. Raman scattering with circular corotating polarization is ideal for analyzing strain and doping, especially for weak strain when the peak splitting by shear strain cannot be resolved.

cond-mat.mtrl-sci

Quantum Nature of Plasmon-Enhanced Raman Scattering

We report plasmon-enhanced Raman scattering in graphene coupled to a single plasmonic hotspot measured as a function of laser energy. The enhancement profiles of the G peak show strong enhancement (up to $10^5$) and narrow resonances (30 meV) that are induced by the localized surface plasmon of a gold nanodimer. We observe the evolution of defect-mode scattering in a defect-free graphene lattice in resonance with the plasmon. We propose a quantum theory of plasmon-enhanced Raman scattering, where the plasmon forms an integral part of the excitation process. Quantum interferences between scattering channels explain the experimentally observed resonance profiles, in particular, the marked difference in enhancement factors for incoming and outgoing resonance and the appearance of the defect-type modes.

cond-mat.mes-hall