arXiv subjects

Sebastian Lengeling

Publications and source records attributed to Sebastian Lengeling.

8 recordsLinked to original sources

arXiv2026

Coherent temporal filtering of multimode parametric down-conversion using a quantum pulse gate

Spectrally pure and indistinguishable single photons are essential for quantum network platforms, where high-visibility interference underpins many quantum information protocols. However, most practical single-photon sources emit spectrally multimode states with reduced purity. Conventional spectral intensity filtering can partially improve purity but cannot select a well-defined temporal mode (TM). Here, we demonstrate coherent temporal filtering of a multimode parametric down-conversion (PDC) source using a quantum pulse gate (QPG) and benchmark its performance against conventional intensity filtering. The generated PDC photons exhibit strong spectral correlations, rendering extraction of pure heralded photons from the pair a challenge. We demonstrate that QPG filtering consistently generates heralded photons with purities above 0.90 regardless of the filter shape. Contrariwise, using spectral intensity filters yields mixed photons. Photon purities are probed with chronocyclic Q-function tomography. Furthermore, we demonstrate the versatility of QPG filtering by extracting structured TMs, including superposition of picosecond time bins. These results establish the QPG as a practical coherent filtering tool for quantum network applications.

quant-ph↗

arXiv2026

A high-performance quantum pulse gate in thin-film lithium niobate

In this work, we demonstrate a quantum pulse gate (QPG) in thin-film lithium niobate. QPGs enable the selective manipulation and detection of temporal modes of quantum light and form the basis of numerous applications in photonic quantum technologies. To date, their widespread adaption is held back by two main limitations: restricted wavelength and polarization combinations of the involved fields and low normalized conversion efficiencies. We overcome these limitations through developing a QPG in thin-film lithium niobate. We design a waveguide geometry that provides the required dispersion properties for a highly efficient type-0 sum-frequency generation.We verify our design through mapping of the phase matching intensity, and demonstrate high-quality QPG operation by measuring a temporal-mode selectivity of (96.8$\pm$1.7)% on par with existing QPGs. Thanks to the strong confinement in thin-film lithium niobate, we succeed in demonstrating an internal conversion efficiency of (89.6$\pm$0.1)% for a pump power of only 20mW in front of our sample. This yields a lower-bound estimate for the normalized conversion efficiency of (1810$\pm$10)$\mathrm{W}^{-1}\mathrm{cm}^{-2}$, three orders of magnitude higher than in previous QPGs. Our results establish thin-film lithium niobate as ideal platform for high-performance QPGs and are a major step towards practical QPGs for photonic quantum technologies.

quant-ph↗

arXiv2025

Widely non-degenerate nonlinear frequency conversion in cryogenic titanium in-diffused lithium niobate waveguides

The titanium in-diffused lithium niobate waveguide platform is well-established for reliable prototyping and packaging of many quantum photonic components at room temperature. Nevertheless, compatibility with certain quantum light sources and superconducting detectors requires operation under cryogenic conditions. We characterize alterations in phase-matching and mode guiding of a non-degenerate spontaneous parametric down-conversion process emitting around 1556 nm and 950 nm, under cryogenic conditions. Despite the effects of pyroelectricity and photorefraction, the spectral properties match our theoretical model. Nevertheless, these effects cause small but significant variations within and between cooling cycles. These measurements provide a first benchmark against which other nonlinear photonic integration platforms, such as thin-film lithium niobate, can be compared.

quant-ph↗

arXiv2024

Cryogenic Feedforward of a Photonic Quantum State

Modulation conditioned on measurements on entangled photonic quantum states is a cornerstone technology of optical quantum information processing. Performing this task with low latency requires combining single-photon-level detectors with both electronic logic processing and optical modulation in close proximity. In the technologically relevant telecom wavelength band, detection of photonic quantum states is best performed with high-efficiency, low-noise, and high-speed detectors based on the photon-induced breakdown of superconductivity. Therefore, using these devices for feedforward requires mutual compatibility of all components under cryogenic conditions. Here, we demonstrate low-latency feedforward using a quasi-photon-number-resolved measurement on a quantum light source. Specifically, we use a multipixel superconducting nanowire single-photon detector, amplifier, logic, and an integrated electro-optic modulator in situ below 4K. We modulate the signal mode of a spontaneous parametric down-conversion source, conditional on a photon-number measurement of the idler mode, with a total latency of (23+/-3)ns. The photon-number discrimination actively manipulates the signal mode photon statistics, which is itself a central component in photonic quantum computing reliant on heralded single-photon sources. This represents an important benchmark for the fastest quantum photonic feedforward experiments comprising measurement, amplification, logic and modulation. This has direct applications in quantum computing, communication, and simulation protocols.

quant-ph↗

arXiv2023

Pyroelectric Influence on Lithium Niobate During the Thermal Transition for Cryogenic Integrated Photonics

Lithium niobate has emerged as a promising platform for integrated quantum optics, enabling efficient generation, manipulation, and detection of quantum states of light. However, integrating single-photon detectors requires cryogenic operating temperatures, since the best performing detectors are based on narrow superconducting wires. While previous studies have demonstrated the operation of quantum light sources and electro-optic modulators in LiNbO3 at cryogenic temperatures, the thermal transition between room temperature and cryogenic conditions introduces additional effects that can significantly influence device performance. In this paper, we investigate the generation of pyroelectric charges and their impact on the optical properties of lithium niobate waveguides when changing from room temperature to 25K, and vice versa. We measure the generated pyroelectric charge flow and correlate this with fast changes in the birefringence acquired through the Senarmont method. Both electrical and optical influence of the pyroelectric effect occurs predominantly at temperatures above 100K.

physics.optics↗

arXiv2023

All optical operation of a superconducting photonic interface

Advanced electro-optic processing combines electrical control with optical modulation and detection. For quantum photonic applications these processes must be carried out at the single photon level with high efficiency and low noise. Integrated quantum photonics has made great strides achieving single photon manipulation by combining key components on integrated chips which are operated by external driving electronics. Nevertheless, electrical interconnects between driving electronics and the electro-optic components, some of which require cryogenic operating conditions, can introduce parasitic effects. Here we show an all-optical interface which simultaneously delivers the operation power to, and extracts the measurement signal from, an advanced photonic circuit, namely, bias and readout of a superconducting nanowire single photon detector (SNSPD) on a single stage in a 1K cryostat. To do so, we supply all power for the single photon detector, output signal conditioning, and electro-optic readout using optical interconnects alone, thereby fully decoupling the cryogenic circuitry from the external environment. This removes the need to heatsink electrical connections, and potentially offers low-loss, high-bandwidth signal processing. This method opens the possibility to operate other advanced electrically decoupled photonic circuits such as optical control and readout of superconducting circuits, and feedforward for photonic quantum computing.

quant-ph↗

arXiv2022

Cryogenic electro-optic modulation in titanium in-diffused lithium niobate waveguides

Lithium niobate is a promising platform for integrated quantum optics. In this platform we aim to efficiently manipulate and detect quantum states by combining superconducting single photon detectors and modulators. The cryogenic operation of a superconducting single photon detector dictates the optimisation of the electro-optic modulators under the same operating conditions. To that end, we characterise a phase modulator, directional coupler, and polarisation converter at both ambient and cryogenic temperatures. The operation voltage $V_{\pi/2}$ of these modulators increases due to the decrease of the electro-optic effect by 74% for the phase modulator, 84% for the directional coupler and 35% for the polarisation converter below 8.5$\,\mathrm{K}$. The phase modulator preserves its broadband nature and modulates light in the characterised wavelength range. The unbiased bar state of the directional coupler changed by a wavelength shift of 85$\,\mathrm{nm}$ while cooling the device down to 5$\,\mathrm{K}$. The polarisation converter uses periodic poling to phasematch the two orthogonal polarisations. The phasematched wavelength of the used poling changes by 112$\,\mathrm{nm}$ when cooling to 5$\,\mathrm{K}$

physics.optics↗

arXiv2017

Towards integrated superconducting detectors on lithium niobate waveguides

Superconducting detectors are now well-established tools for low-light optics, and in particular quantum optics, boasting high-efficiency, fast response and low noise. Similarly, lithium niobate is an important platform for integrated optics given its high second-order nonlinearity, used for high-speed electro-optic modulation and polarization conversion, as well as frequency conversion and sources of quantum light. Combining these technologies addresses the requirements for a single platform capable of generating, manipulating and measuring quantum light in many degrees of freedom, in a compact and potentially scalable manner. We will report on progress integrating tungsten transition-edge sensors (TESs) and amorphous tungsten silicide superconducting nanowire single-photon detectors (SNSPDs) on titanium in-diffused lithium niobate waveguides. The travelling-wave design couples the evanescent field from the waveguides into the superconducting absorber. We will report on simulations and measurements of the absorption, which we can characterize at room temperature prior to cooling down the devices. Independently, we show how the detectors respond to flood illumination, normally incident on the devices, demonstrating their functionality.

physics.ins-det↗