arXiv subjects

Sebastian Trimpe

Publications and source records attributed to Sebastian Trimpe.

At least 127 records · Page 7Linked to original sources

arXiv2019

A Learnable Safety Measure

Failures are challenging for learning to control physical systems since they risk damage, time-consuming resets, and often provide little gradient information. Adding safety constraints to exploration typically requires a lot of prior knowledge and domain expertise. We present a safety measure which implicitly captures how the system dynamics relate to a set of failure states. Not only can this measure be used as a safety function, but also to directly compute the set of safe state-action pairs. Further, we show a model-free approach to learn this measure by active sampling using Gaussian processes. While safety can only be guaranteed after learning the safety measure, we show that failures can already be greatly reduced by using the estimated measure during learning.

cs.LG↗

arXiv2019

Fast Feedback Control over Multi-hop Wireless Networks with Mode Changes and Stability Guarantees

Closing feedback loops fast and over long distances is key to emerging cyber-physical applications; for example, robot motion control and swarm coordination require update intervals of tens of milliseconds. Low-power wireless communication technology is preferred for its low cost, small form factor, and flexibility, especially if the devices support multi-hop communication. Thus far, however, feedback control over multi-hop low-power wireless networks has only been demonstrated for update intervals on the order of seconds. To fill this gap, this paper presents a wireless embedded system that supports dynamic mode changes and tames imperfections impairing control performance (e.g., jitter and message loss), and a control design that exploits the essential properties of this system to provably guarantee closed-loop stability for physical processes with linear time-invariant dynamics in the presence of mode changes. Using experiments on a cyber-physical testbed with 20 wireless devices and multiple cart-pole systems, we are the first to demonstrate and evaluate feedback control and coordination with mode changes over multi-hop networks for update intervals of 20 to 50 milliseconds.

eess.SY↗

arXiv2019

Predictive Triggering for Distributed Control of Resource Constrained Multi-agent Systems

A predictive triggering (PT) framework for the distributed control of resource constrained multi-agent systems is proposed. By predicting future communication demands and deriving a probabilistic priority measure, the PT framework is able to allocate limited communication resources in advance. The framework is evaluated through simulations of a cooperative adaptive cruise control system and experiments on multi-agent cart-pole systems. The results of these studies show its effectiveness over other event-triggered designs at reducing network utilization, while also improving the control error of the system.

eess.SY↗

arXiv2019

Demo Abstract: Fast Feedback Control and Coordination with Mode Changes for Wireless Cyber-Physical Systems

This abstract describes the first public demonstration of feedback control and coordination of multiple physical systems over a dynamic multi-hop low-power wireless network with update intervals of tens of milliseconds. Our running system can dynamically change between different sets of application tasks (e.g., sensing, actuation, control) executing on the spatially distributed embedded devices, while closed-loop stability is provably guaranteed even across those so-called mode changes. Moreover, any subset of the devices can move freely, which does not affect closed-loop stability and control performance as long as the wireless network remains connected.

cs.NI↗

arXiv2019

Control-guided Communication: Efficient Resource Arbitration and Allocation in Multi-hop Wireless Control Systems

In future autonomous systems, wireless multi-hop communication is key to enable collaboration among distributed agents at low cost and high flexibility. When many agents need to transmit information over the same wireless network, communication becomes a shared and contested resource. Event-triggered and self-triggered control account for this by transmitting data only when needed, enabling significant energy savings. However, a solution that brings those benefits to multi-hop networks and can reallocate freed up bandwidth to additional agents or data sources is still missing. To fill this gap, we propose control-guided communication, a novel co-design approach for distributed self-triggered control over wireless multi-hop networks. The control system informs the communication system of its transmission demands ahead of time, and the communication system allocates resources accordingly. Experiments on a cyber-physical testbed show that multiple cart-poles can be synchronized over wireless, while serving other traffic when resources are available, or saving energy. These experiments are the first to demonstrate and evaluate distributed self-triggered control over low-power multi-hop wireless networks at update rates of tens of milliseconds.

eess.SY↗

arXiv2019

Hierarchical Event-triggered Learning for Cyclically Excited Systems with Application to Wireless Sensor Networks

Communication load is a limiting factor in many real-time systems. Event-triggered state estimation and event-triggered learning methods reduce network communication by sending information only when it cannot be adequately predicted based on previously transmitted data. This paper proposes an event-triggered learning approach for nonlinear discrete-time systems with cyclic excitation. The method automatically recognizes cyclic patterns in data - even when they change repeatedly - and reduces communication load whenever the current data can be accurately predicted from previous cycles. Nonetheless, a bounded error between original and received signal is guaranteed. The cyclic excitation model, which is used for predictions, is updated hierarchically, i.e., a full model update is only performed if updating a small number of model parameters is not sufficient. A nonparametric statistical test enforces that model updates happen only if the cyclic excitation changed with high probability. The effectiveness of the proposed methods is demonstrated using the application example of wireless real-time pitch angle measurements of a human foot in a feedback-controlled neuroprosthesis. The experimental results show that communication load can be reduced by 70 % while the root-mean-square error between measured and received angle is less than 1°.

eess.SY↗

arXiv2019

Trajectory-Based Off-Policy Deep Reinforcement Learning

Policy gradient methods are powerful reinforcement learning algorithms and have been demonstrated to solve many complex tasks. However, these methods are also data-inefficient, afflicted with high variance gradient estimates, and frequently get stuck in local optima. This work addresses these weaknesses by combining recent improvements in the reuse of off-policy data and exploration in parameter space with deterministic behavioral policies. The resulting objective is amenable to standard neural network optimization strategies like stochastic gradient descent or stochastic gradient Hamiltonian Monte Carlo. Incorporation of previous rollouts via importance sampling greatly improves data-efficiency, whilst stochastic optimization schemes facilitate the escape from local optima. We evaluate the proposed approach on a series of continuous control benchmark tasks. The results show that the proposed algorithm is able to successfully and reliably learn solutions using fewer system interactions than standard policy gradient methods.

cs.LG↗

arXiv2019

Event-triggered Pulse Control with Model Learning (if Necessary)

In networked control systems, communication is a shared and therefore scarce resource. Event-triggered control (ETC) can achieve high performance control with a significantly reduced amount of samples compared to classical, periodic control schemes. However, ETC methods usually rely on the availability of an accurate dynamics model, which is oftentimes not readily available. In this paper, we propose a novel event-triggered pulse control strategy that learns dynamics models if necessary. In addition to adapting to changing dynamics, the method also represents a suitable replacement for the integral part typically used in periodic control.

eess.SY↗

arXiv2019

Feedback Control Goes Wireless: Guaranteed Stability over Low-power Multi-hop Networks

Closing feedback loops fast and over long distances is key to emerging applications; for example, robot motion control and swarm coordination require update intervals of tens of milliseconds. Low-power wireless technology is preferred for its low cost, small form factor, and flexibility, especially if the devices support multi-hop communication. So far, however, feedback control over wireless multi-hop networks has only been shown for update intervals on the order of seconds. This paper presents a wireless embedded system that tames imperfections impairing control performance (e.g., jitter and message loss), and a control design that exploits the essential properties of this system to provably guarantee closed-loop stability for physical processes with linear time-invariant dynamics. Using experiments on a cyber-physical testbed with 20 wireless nodes and multiple cart-pole systems, we are the first to demonstrate and evaluate feedback control and coordination over wireless multi-hop networks for update intervals of 20 to 50 milliseconds.

cs.NI↗

arXiv2019

Resource-aware IoT Control: Saving Communication through Predictive Triggering

The Internet of Things (IoT) interconnects multiple physical devices in large-scale networks. When the 'things' coordinate decisions and act collectively on shared information, feedback is introduced between them. Multiple feedback loops are thus closed over a shared, general-purpose network. Traditional feedback control is unsuitable for design of IoT control because it relies on high-rate periodic communication and is ignorant of the shared network resource. Therefore, recent event-based estimation methods are applied herein for resource-aware IoT control allowing agents to decide online whether communication with other agents is needed, or not. While this can reduce network traffic significantly, a severe limitation of typical event-based approaches is the need for instantaneous triggering decisions that leave no time to reallocate freed resources (e.g., communication slots), which hence remain unused. To address this problem, novel predictive and self triggering protocols are proposed herein. From a unified Bayesian decision framework, two schemes are developed: self triggers that predict, at the current triggering instant, the next one; and predictive triggers that check at every time step, whether communication will be needed at a given prediction horizon. The suitability of these triggers for feedback control is demonstrated in hardware experiments on a cart-pole, and scalability is discussed with a multi-vehicle simulation.

eess.SY↗

arXiv2018

Data-efficient Auto-tuning with Bayesian Optimization: An Industrial Control Study

Bayesian optimization is proposed for automatic learning of optimal controller parameters from experimental data. A probabilistic description (a Gaussian process) is used to model the unknown function from controller parameters to a user-defined cost. The probabilistic model is updated with data, which is obtained by testing a set of parameters on the physical system and evaluating the cost. In order to learn fast, the Bayesian optimization algorithm selects the next parameters to evaluate in a systematic way, for example, by maximizing information gain about the optimum. The algorithm thus iteratively finds the globally optimal parameters with only few experiments. Taking throttle valve control as a representative industrial control example, the proposed auto-tuning method is shown to outperform manual calibration: it consistently achieves better performance with a low number of experiments. The proposed auto-tuning framework is flexible and can handle different control structures and objectives.

eess.SY↗

arXiv2018

Efficient Encoding of Dynamical Systems through Local Approximations

An efficient representation of observed data has many benefits in various domains of engineering and science. Representing static data sets, such as images, is a living branch in machine learning and eases downstream tasks, such as classification, regression, or decision making. However, the representation of dynamical systems has received less attention. In this work, we develop a method to represent a dynamical system efficiently as a combination of a state and a local model, which fulfills a criterion inspired by the minimum description length (MDL) principle. The MDL principle is used in machine learning and statistics to quantify the trade-off between the ability to explain seen data and the model complexity. Networked control systems are a prominent example, where such a representation is beneficial. When many agents share a network, information exchange is costly and should thus happen only when necessary. We empirically show the efficiency of the proposed encoding for several dynamical systems and demonstrate reduced communication for event-triggered state estimation problems.

eess.SY↗

arXiv2018

Event-triggered Learning for Resource-efficient Networked Control

Common event-triggered state estimation (ETSE) algorithms save communication in networked control systems by predicting agents' behavior, and transmitting updates only when the predictions deviate significantly. The effectiveness in reducing communication thus heavily depends on the quality of the dynamics models used to predict the agents' states or measurements. Event-triggered learning is proposed herein as a novel concept to further reduce communication: whenever poor communication performance is detected, an identification experiment is triggered and an improved prediction model learned from data. Effective learning triggers are obtained by comparing the actual communication rate with the one that is expected based on the current model. By analyzing statistical properties of the inter-communication times and leveraging powerful convergence results, the proposed trigger is proven to limit learning experiments to the necessary instants. Numerical and physical experiments demonstrate that event-triggered learning improves robustness toward changing environments and yields lower communication rates than common ETSE.

eess.SY↗

arXiv2018

Deep Reinforcement Learning for Event-Triggered Control

Event-triggered control (ETC) methods can achieve high-performance control with a significantly lower number of samples compared to usual, time-triggered methods. These frameworks are often based on a mathematical model of the system and specific designs of controller and event trigger. In this paper, we show how deep reinforcement learning (DRL) algorithms can be leveraged to simultaneously learn control and communication behavior from scratch, and present a DRL approach that is particularly suitable for ETC. To our knowledge, this is the first work to apply DRL to ETC. We validate the approach on multiple control tasks and compare it to model-based event-triggering frameworks. In particular, we demonstrate that it can, other than many model-based ETC designs, be straightforwardly applied to nonlinear systems.

eess.SY↗

arXiv2018

Gait learning for soft microrobots controlled by light fields

Soft microrobots based on photoresponsive materials and controlled by light fields can generate a variety of different gaits. This inherent flexibility can be exploited to maximize their locomotion performance in a given environment and used to adapt them to changing conditions. Albeit, because of the lack of accurate locomotion models, and given the intrinsic variability among microrobots, analytical control design is not possible. Common data-driven approaches, on the other hand, require running prohibitive numbers of experiments and lead to very sample-specific results. Here we propose a probabilistic learning approach for light-controlled soft microrobots based on Bayesian Optimization (BO) and Gaussian Processes (GPs). The proposed approach results in a learning scheme that is data-efficient, enabling gait optimization with a limited experimental budget, and robust against differences among microrobot samples. These features are obtained by designing the learning scheme through the comparison of different GP priors and BO settings on a semi-synthetic data set. The developed learning scheme is validated in microrobot experiments, resulting in a 115% improvement in a microrobot's locomotion performance with an experimental budget of only 20 tests. These encouraging results lead the way toward self-adaptive microrobotic systems based on light-controlled soft microrobots and probabilistic learning control.

cs.RO↗

arXiv2018

Learning an Approximate Model Predictive Controller with Guarantees

A supervised learning framework is proposed to approximate a model predictive controller (MPC) with reduced computational complexity and guarantees on stability and constraint satisfaction. The framework can be used for a wide class of nonlinear systems. Any standard supervised learning technique (e.g. neural networks) can be employed to approximate the MPC from samples. In order to obtain closed-loop guarantees for the learned MPC, a robust MPC design is combined with statistical learning bounds. The MPC design ensures robustness to inaccurate inputs within given bounds, and Hoeffding's Inequality is used to validate that the learned MPC satisfies these bounds with high confidence. The result is a closed-loop statistical guarantee on stability and constraint satisfaction for the learned MPC. The proposed learning-based MPC framework is illustrated on a nonlinear benchmark problem, for which we learn a neural network controller with guarantees.

eess.SY↗

arXiv2018

A Local Information Criterion for Dynamical Systems

Encoding a sequence of observations is an essential task with many applications. The encoding can become highly efficient when the observations are generated by a dynamical system. A dynamical system imposes regularities on the observations that can be leveraged to achieve a more efficient code. We propose a method to encode a given or learned dynamical system. Apart from its application for encoding a sequence of observations, we propose to use the compression achieved by this encoding as a criterion for model selection. Given a dataset, different learning algorithms result in different models. But not all learned models are equally good. We show that the proposed encoding approach can be used to choose the learned model which is closer to the true underlying dynamics. We provide experiments for both encoding and model selection, and theoretical results that shed light on why the approach works.

stat.ML↗

arXiv2018

Evaluating Low-Power Wireless Cyber-Physical Systems

Simulation tools and testbeds have been proposed to assess the performance of control designs and wireless protocols in isolation. A cyber-physical system (CPS), however, integrates control with network elements, which must be evaluated together under real-world conditions to assess control performance, stability, and associated costs. We present an approach to evaluate CPS relying on embedded devices and low-power wireless technology. Using one or multiple inverted pendulums as physical system, our approach supports a spectrum of realistic CPS scenarios that impose different requirements onto the control and networking elements. Moreover, our approach allows one to flexibly combine simulated and real pendulums, promoting adoption, scalability, repeatability, and integration with existing wireless testbed infrastructures. A case study demonstrates implementation, execution, and measurements using the proposed evaluation approach.

cs.NI↗