arXiv subjects

Sebastian Wolf

Publications and source records attributed to Sebastian Wolf.

At least 109 records · Page 6Linked to original sources

arXiv2017

In-situ analysis of optically thick nanoparticle clouds

Nanoparticles grown in reactive plasmas and nanodusty plasmas gain high interest from basic science and technology. One of the great challenges of nanodusty plasmas is the in-situ diagnostic of the nanoparticle size and refractive index. The analysis of scattered light by means of the Mie solution of the Maxwell equations was proposed and used as an in-situ size diagnostic during the past two decades. Today, imaging ellipsometry techniques and the investigation of dense, i. e. optically thick nanoparticle clouds demand for analysis methods to take multiple scattering into account. We present the first 3D Monte-Carlo polarized radiative transfer simulations of the scattered light in a dense nanodusty plasma. This technique extends the existing diagnostic methods for the in-situ analysis of the properties of nanoparticles to systems where multiple scattering can not be neglected.

physics.plasm-ph↗

arXiv2017

Observability of characteristic binary-induced structures in circumbinary disks

Context: A substantial fraction of protoplanetary disks forms around stellar binaries. The binary system generates a time-dependent non-axisymmetric gravitational potential, inducing strong tidal forces on the circumbinary disk. This leads to a change in basic physical properties of the circumbinary disk, which should in turn result in unique structures that are potentially observable with the current generation of instruments. Aims: The goal of this study is to identify these characteristic structures, to constrain the physical conditions that cause them, and to evaluate the feasibility to observe them in circumbinary disks. Methods: To achieve this, at first two-dimensional hydrodynamic simulations are performed. The resulting density distributions are post-processed with a 3D radiative transfer code to generate re-emission and scattered light maps. Based on these, we study the influence of various parameters, such as the mass of the stellar components, the mass of the disk and the binary separation on observable features in circumbinary disks. Results: We find that the Atacama Large (sub-)Millimetre Array (ALMA) as well as the European Extremely Large Telescope (E-ELT) are capable of tracing asymmetries in the inner region of circumbinary disks which are affected most by the binary-disk interaction. Observations at submillimetre/millimetre wavelengths will allow the detection of the density waves at the inner rim of the disk and the inner cavity. With the E-ELT one can partially resolve the innermost parts of the disk in the infrared wavelength range, including the disk's rim, accretion arms and potentially the expected circumstellar disks around each of the binary components.

astro-ph.SR↗

arXiv2017

Constraints on the structure of hot exozodiacal dust belts

Recent interferometric surveys of nearby main-sequence stars show a faint but significant near-infrared excess in roughly two dozen systems, i.$\,$e. around $10\,\%$ to $30\,\%$ of stars surveyed. This excess is attributed to dust located in the immediate vicinity of the star, the origin of which is highly debated. We used previously published interferometric observations to constrain the properties and distribution of this hot dust. Considering both scattered radiation and thermal reemission, we modelled the observed excess in nine of these systems. We find that grains have to be sufficiently absorbing to be consistent with the observed excess, while dielectric grains with pure silicate compositions fail to reproduce the observations. The dust should be located within $\sim\,0.01-1\,au$ from the star depending on its luminosity. Furthermore, we find a significant trend for the disc radius to increase with the stellar luminosity. The dust grains are determined to be below $0.2-0.5\,μ\textrm{m}$, but above $0.02-0.15\,μ\textrm{m}$ in radius. The dust masses amount to $(0.2-3.5)\times10^{-9}\,M_\oplus$. The near-infrared excess is probably dominated by thermal reemission, though a contribution of scattered light up to $35\,\%$ cannot be completely excluded. The polarisation degree predicted by our models is always below $5\,\%$, and for grains smaller than $\sim0.2\,μ\textrm{m}$ even below $1\,\%$. We also modelled the observed near-infrared excess of another ten systems with poorer data in the mid-infrared. The basic results for these systems appear qualitatively similar, yet the constraints on the dust location and the grain sizes are weaker.

astro-ph.SR↗

arXiv2016

The influence of dust grain porosity on the analysis of debris disc observations

Debris discs are often modelled assuming compact dust grains, but more and more evidence for the presence of porous grains is found. We aim at quantifying the systematic errors introduced when modelling debris discs composed of porous dust with a disc model assuming spherical, compact grains. We calculate the optical dust properties derived via the fast, but simple effective medium theory. The theoretical lower boundary of the size distribution -- the so-called 'blowout size' -- is compared in the cases of compact and porous grains. Finally, we simulate observations of hypothetical debris discs with different porosities and feed them into a fitting procedure using only compact grains. The deviations of the results for compact grains from the original model based on porous grains are analysed. We find that the blowout size increases with increasing grain porosity up to a factor of two. An analytical approximation function for the blowout size as a function of porosity and stellar luminosity is derived. The analysis of the geometrical disc set-up, when constrained by radial profiles, are barely affected by the porosity. However, the determined minimum grain size and the slope of the grain size distribution derived using compact grains are significantly overestimated. Thus, the unexpectedly high ratio of minimum grain size to blowout size found by previous studies using compact grains can be partially described by dust grain porosity, although the effect is not strong enough to completely explain the trend.

astro-ph.SR↗

arXiv2016

RetiNet: Automatic AMD identification in OCT volumetric data

Optical Coherence Tomography (OCT) provides a unique ability to image the eye retina in 3D at micrometer resolution and gives ophthalmologist the ability to visualize retinal diseases such as Age-Related Macular Degeneration (AMD). While visual inspection of OCT volumes remains the main method for AMD identification, doing so is time consuming as each cross-section within the volume must be inspected individually by the clinician. In much the same way, acquiring ground truth information for each cross-section is expensive and time consuming. This fact heavily limits the ability to acquire large amounts of ground truth, which subsequently impacts the performance of learning-based methods geared at automatic pathology identification. To avoid this burden, we propose a novel strategy for automatic analysis of OCT volumes where only volume labels are needed. That is, we train a classifier in a semi-supervised manner to conduct this task. Our approach uses a novel Convolutional Neural Network (CNN) architecture, that only needs volume-level labels to be trained to automatically asses whether an OCT volume is healthy or contains AMD. Our architecture involves first learning a cross-section pathology classifier using pseudo-labels that could be corrupted and then leverage these towards a more accurate volume-level classification. We then show that our approach provides excellent performances on a publicly available dataset and outperforms a number of existing automatic techniques.

cs.CV↗

arXiv2016

Magnetic fields in protoplanetary disks: from MHD simulations to ALMA observations

Magnetic fields significantly influence the evolution of protoplanetary disks and the formation of planets, following the predictions of numerous magnetohydrodynamic (MHD) simulations. However, these predictions are yet observationally unconstrained. To validate the predictions on the influence of magnetic fields on protoplanetary disks, we apply 3D radiative transfer simulations of the polarized emission of aligned aspherical dust grains that directly link 3D global non-ideal MHD simulations to ALMA observations. Our simulations show that it is feasible to observe the predicted toroidal large-scale magnetic field structures, not only in the ideal observations but also with high-angular resolution ALMA observations. Our results show further that high angular resolution observations by ALMA are able to identify vortices embedded in outer magnetized disk regions.

astro-ph.EP↗

arXiv2016

Planet Formation Imager (PFI): science vision and key requirements

The Planet Formation Imager (PFI) project aims to provide a strong scientific vision for ground-based optical astronomy beyond the upcoming generation of Extremely Large Telescopes. We make the case that a breakthrough in angular resolution imaging capabilities is required in order to unravel the processes involved in planet formation. PFI will be optimised to provide a complete census of the protoplanet population at all stellocentric radii and over the age range from 0.1 to about 100 Myr. Within this age period, planetary systems undergo dramatic changes and the final architecture of planetary systems is determined. Our goal is to study the planetary birth on the natural spatial scale where the material is assembled, which is the "Hill Sphere" of the forming planet, and to characterise the protoplanetary cores by measuring their masses and physical properties. Our science working group has investigated the observational characteristics of these young protoplanets as well as the migration mechanisms that might alter the system architecture. We simulated the imprints that the planets leave in the disk and study how PFI could revolutionise areas ranging from exoplanet to extragalactic science. In this contribution we outline the key science drivers of PFI and discuss the requirements that will guide the technology choices, the site selection, and potential science/technology tradeoffs.

astro-ph.IM↗

arXiv2016

The circumstellar disk of FS Tau B - A self-consistent model based on observations in the mid-infrared with NACO -

Protoplanetary disks are a byproduct of the star formation process. In the dense mid-plane of these disks, planetesimals and planets are expected to form. The first step in planet formation is the growth of dust particles from submicrometer-sized grains to macroscopic mm-sized aggregates. The grain growth is accompanied by radial drift and vertical segregation of the particles within the disk. To understand this essential evolutionary step, spatially resolved multi-wavelength observations as well as photometric data are necessary which reflect the properties of both disk and dust. We present the first spatially resolved image obtained with NACO at the VLT in the L$_\text{p}$ band of the near edge-on protoplanetary disk FS Tau B. Based on this new image, a previously published Hubble image in H band and the spectral energy distribution from optical to millimeter wavelengths, we derive constraints on the spatial dust distribution and the progress of grain growth. For this purpose we perform a disk modeling using the radiative transfer code MC3D. Radial drift and vertical sedimentation of the dust are not considered. We find a best-fit model which features a disk extending from $2\,\text{AU}$ to several hundreds AU with a moderately decreasing surface density and $M_\text{disk}=2.8\,\times\,10^{-2}\,\text{M}_\odot$. The inclination amounts to $i=80^\circ$. Our findings indicate that substantial dust grain growth has taken place and that grains of a size equal to or larger than $1\,\text{mm}$ are present in the disk. In conclusion, the parameters describing the vertical density distribution are better constrained than those describing the radial disk structure.

astro-ph.SR↗

arXiv2016

Origin and evolution of two-component debris discs and an application to the q$^1$ Eridani system

Many debris discs reveal a two-component structure, with an outer Kuiper-belt analogue and a warm inner component whose origin is still a matter of debate. One possibility is that warm emission stems from an "asteroid belt" closer in to the star. We consider a scenario in which a set of giant planets is formed in an initially extended planetesimal disc. These planets carve a broad gap around their orbits, splitting up the disc into the outer and the inner belts. After the gas dispersal, both belts undergo collisional evolution in a steady-state regime. This scenario is explored with detailed collisional simulations involving realistic physics to describe a long-term collisional depletion of the two-component disc. We find that the inner disc may be able to retain larger amounts of material at older ages than thought before on the basis of simplified analytic models. We show that the proposed scenario is consistent with a suite of thermal emission and scattered light observational data for a bright two-temperature debris disc around a nearby solar-type star q$^1$ Eridani. This implies a Solar System-like architecture of the system, with an outer massive "Kuiper belt", an inner "asteroid belt", and a few Neptune- to Jupiter-mass planets in between.

astro-ph.EP↗

arXiv2016

Radiative transfer with POLARIS: I. Analysis of magnetic fields through synthetic dust continuum polarization measurements

Aims: We present POLARIS (POLArized RadIation Simulator), a newly developed three-dimensional Monte-Carlo radiative transfer code. POLARIS was designed to calculate dust temperature, polarization maps, and spectral energy distributions. It is optimized to handle data that results from sophisticated magneto-hydrodynamic simulations. The main purpose of the code is to prepare and analyze multi-wavelength continuum polarization measurements in the context of magnetic field studies in the interstellar medium. An exemplary application is the investigation of the role of magnetic fields in star formation processes. Methods: We combine currently discussed state-of-the-art grain alignment theories with existing dust heating and polarization algorithms. We test the POLARIS code on multiple scales in complex astrophysical systems that are associated with different stages of star formation. POLARIS uses the full spectrum of dust polarization mechanisms to trace the underlying magnetic field morphology. Results: Resulting temperature distributions are consistent with the density and position of radiation sources resulting from magneto-hydrodynamic (MHD) - collapse simulations. The calculated layers of aligned dust grains in the considered cirumstellar disk models are in excellent agreement with theoretical predictions. Finally, we compute unique patterns in synthetic multi-wavelength polarization maps that are dependent on applied dust-model and grain-alignment theory in analytical cloud models.

astro-ph.IM↗

arXiv2016

Visibility of Young's interference fringes: Scattered light from small ion crystals

We observe interference in the light scattered from trapped $^{40}$Ca$^+$ ion crystals. By varying the intensity of the excitation laser, we study the influence of elastic and inelastic scattering on the visibility of the fringe pattern and discriminate its effect from that of the ion temperature and wave-packet localization. In this way we determine the complex degree of coherence and the mutual coherence of light fields produced by individual atoms. We obtain interference fringes from crystals consisting of two, three and four ions in a harmonic trap. Control of the trapping potential allows for the adjustment of the interatomic distances and thus the formation of linear arrays of atoms serving as a regular grating of microscopic scatterers.

quant-ph↗

arXiv2015

Microscopy with a Deterministic Single Ion Source

We realize a single particle microscope by using deterministically extracted laser cooled $^{40}$Ca$^+$ ions from a Paul trap as probe particles for transmission imaging. We demonstrate focusing of the ions with a resolution of 5.8$\;\pm\;$1.0$\,$nm and a minimum two-sample deviation of the beam position of 1.5$\,$nm in the focal plane. The deterministic source, even when used in combination with an imperfect detector, gives rise to much higher signal to noise ratios as compared with conventional Poissonian sources. Gating of the detector signal by the extraction event suppresses dark counts by 6 orders of magnitude. We implement a Bayes experimental design approach to microscopy in order to maximize the gain in spatial information. We demonstrate this method by determining the position of a 1$\,μ$m circular hole structure to an accuracy of 2.7$\,$nm using only 579 probe particles.

physics.atom-ph↗

arXiv2015

DR Tau: Temporal variability of the brightness distribution in the potential planet-forming region

We investigate the variability of the brightness distribution and the changing density structure of the protoplanetary disk around DR Tau, a classical T Tauri star. DR Tau is known for its peculiar variations from the ultraviolet (UV) to the mid-infrared (MIR). Our goal is to constrain the temporal variation of the disk structure based on photometric and MIR interferometric data. We observed DR Tau with the MID-infrared Interferometric instrument (MIDI) at the Very Large Telescope Interferometer (VLTI) at three epochs separated by about nine years, two months, respectively. We fit the spectral energy distribution and the MIR visibilities with radiative transfer simulations. We are able to reproduce the spectral energy distribution as well as the MIR visibility for one of the three epochs (third epoch) with a basic disk model. We were able to reproduce the very different visibility curve obtained nine years earlier with a very similar baseline (first epoch), using the same disk model with a smaller scale height. The same density distribution also reproduces the observation made with a higher spatial resolution in the second epoch, i.e. only two months before the third epoch.

astro-ph.SR↗

arXiv2015

Structures in circumbinary disks: Prospects for observability

During the past decade circumbinary disks have been discovered around various young binary stars. Hydrodynamical calculations indicate that the gravitational interaction between the central binary star and the surrounding disk results in global perturbations of the disk density profile. We study the observability of characteristic large-scale disk structures resulting from the binary-disk interaction in the case of close binary systems. We derived the structure of circumbinary disks from smoothed-particle hydrodynamic simulations. Subsequently, we performed radiative transfer simulations to obtain scattered light and thermal reemission maps. We investigated the influence of the binary mass ratio, the inclination of the binary orbit relative to the disk midplane, and the eccentricity of the binary orbit on observational quantities. We find that ALMA will allow tracing asymmetries of the inner edge of the disk and potentially resolving spiral arms if the disk is seen face-on. For an edge-on orientation, ALMA will allow detecting perturbations in the disk density distribution through asymmetries in the radial brightness profile. Through the asymmetric structure of the disks, areas are formed with a temperature $2.6$ times higher than at the same location in equivalent unperturbed disks. The time-dependent appearance of the density waves and spiral arms in the disk affects the total re-emission flux of the object by a few percent.

astro-ph.EP↗

arXiv2014

Planet-induced disk structures: A comparison between (sub)mm and infrared radiation

Young giant planets, which are embedded in a circumstellar disk, will significantly perturb the disk density distribution. This effect can potentially be used as an indirect tracer for planets. We investigate the feasibility of observing planet-induced gaps in circumstellar disks in scattered light. We perform 3D hydrodynamical disk simulations combined with subsequent radiative transfer calculations in scattered light for different star, disk, and planet configurations. The results are compared to those of a corresponding study for the (sub)mm thermal re-emission. The feasibility of detecting planet-induced gaps in scattered light is mainly influenced by the optical depth of the disk and therefore by the disk size and mass. Planet-induced gaps are in general only detectable if the photosphere of the disks is sufficiently disturbed. Within the limitations given by the parameter space here considered, we find that gap detection is possible in the case of disks with masses below $\sim 10^{-4\dots-3} \, \rm M_\odot$. Compared to the disk mass that marks the lower Atacama Large (Sub)Millimeter Array (ALMA) detection limit for the thermal radiation re-emitted by the disk, it is possible to detect the same gap both in re-emission and scattered light only in a narrow range of disk masses around $\sim 10^{-4} \, \rm M_\odot$, corresponding to $16\%$ of cases considered in our study.

astro-ph.EP↗

arXiv2014

Shadows and cavities in protoplanetary disks: HD163296, HD141569A, and HD150193A in polarized light

The morphological evolution of dusty disks around young (few Myr-old) stars is pivotal to better understand planet formation. Since both dust grains and the global disk geometry evolve on short timescale, high-resolution imaging of a sample of objects may provide important hints towards such an evolution. We enlarge the sample of protoplanetary disks imaged in polarized light with high-resolution by observing the Herbig Ae/Be stars HD163296, HD141569A, and HD150193A. We integrate our data with previous datasets to paint a larger picture of their morphology. We report a weak detection of the disk around HD163296 in both H and Ks band. The disk is resolved as a broken ring structure with a significan surface brightness drop inward of 0.6 arcsec. No sign of extended polarized emission is detected from the disk around HD141569A and HD150193A. We propose that the absence of scattered light in the inner 0.6 arcsec around HD163296 and the non-detection of the disk around HD150193A may be due to similar geometric factors. Since these disks are known to be flat or only moderately flared, self-shadowing by the disk inner wall is the favored explanation. We show that the polarized brightness of a number of disks is indeed related to their flaring angle. Other scenarios (such as dust grain growth or interaction with icy molecules) are also discussed. On the other hand, the non-detection of HD141569A is consistent with previous datasets revealing the presence of a huge cavity in the dusty disk.

astro-ph.SR↗

arXiv2014

HD139614: the interferometric case for a group-Ib pre-transitional young disk

The Herbig Ae star HD 139614 is a group-Ib object, which featureless SED indicates disk flaring and a possible pre-transitional evolutionary stage. We present mid- and near-IR interferometric results collected with MIDI, AMBER and PIONIER with the aim of constraining the spatial structure of the 0.1-10 AU disk region and assess its possible multi-component structure. A two-component disk model composed of an optically thin 2-AU wide inner disk and an outer temperature-gradient disk starting at 5.6 AU reproduces well the observations. This is an additional argument to the idea that group-I HAeBe inner disks could be already in the disk-clearing transient stage. HD 139614 will become a prime target for mid-IR interferometric imaging with the second-generation instrument MATISSE of the VLTI.

astro-ph.SR↗

arXiv2014

Single particle microscopy with nanometer resolution

We experimentally demonstrate nanoscopic transmission microscopy relying on a deterministic single particle source. This increases the signal-to-noise ratio with respect to conventional microscopy methods, which employ Poissonian particle sources. We use laser-cooled ions extracted from a Paul trap, and demonstrate remote imaging of transmissive objects with a resolution of 8.6 $\pm$ 2.0nm and a minimum two-sample deviation of the beam position of 1.5nm. Detector dark counts can be suppressed by 6 orders of magnitudes through gating by the extraction event. The deterministic nature of our source enables an information-gain driven approach to imaging. We demonstrate this by performing efficient beam characterization based on a Bayes experiment design method.

physics.atom-ph↗