arXiv subjects

Sebastien Guenneau

Publications and source records attributed to Sebastien Guenneau.

At least 19 recordsLinked to original sources

arXiv2026

Neural-field design of broadband Rayleigh-wave carpet cloaks under microstructure realisability constraints

Transformation elasticity provides appropriate material distributions for elastodynamic cloaks but the required stiffness tensors generally violate the minor symmetries of Cauchy elasticity and are difficult to realise using conventional materials. Existing approaches restore these symmetries by modifying the transformed tensor, producing only an approximate cloak. In this work rather than modifying the transformed tensor we seek the best performing cloak within the class of Cauchy materials. We formulate 2D Rayleigh wave carpet cloak design as an optimisation problem governed by partial differential equations. Using a coordinate based neural-field and a differentiable finite element model solver we optimise symmetric stiffness and density fields by minimising wave field distortion. Both single frequency and broadband optimisation are considered, with the broadband model trained over multiple frequencies. Physical realisability is addressed using a database of homogenised microstructures through conditional diffusion, neural-field inverse design, and nearest-neighbour selection. FEM simulations show that the optimised Cauchy design approaches the ideal transformation-based cloak. After projection onto explicit microstructures, the homogenised representation recovers approximately 97% of the defect free reference surface-displacement magnitude, while direct FEM simulation of the fully resolved microstructured geometry recovers approximately 76%

cond-mat.mtrl-sci↗

arXiv2025

Space-Time Elastic Metamaterials for Zero-Frequency and Zero-Wavenumber Bandgaps

We create wave-matter space-time metamaterials using optical trapping forces to manipulate mass-spring chains and create zero-frequency and zero-wavenumber band gaps: the bosonic nature of phonons, and hence this elastodynamic setting, traditionally prohibits either zero-frequency or zero-wavenumber band gaps. Here, we generate zero-frequency gaps using optomechanical interactions within a 3D mass-spring chain by applying an optical trapping force to hold or manipulate a mass in a contactless manner independent of its elastodynamic excitations. Through careful modification of the geometrical parameters in the trapped monoatomic mass-spring chain, we demonstrate the existence of a zero-frequency gap generated by the optical forces on the masses. The precise control we have over the system allows us to drive another set of masses and springs out of phase with its traveling wave thereby creating a zero-wavenumber band gap.

physics.optics↗

arXiv2024

Stochastic cloaking: concealing a region from diffusive particles

We introduce "stochastic cloaking," where a region of space is concealed from an ensemble of diffusing particles whose individual trajectories are governed by a stochastic (Langevin) equation. Our simulations reveal how different interpretations of the Langevin equation affect the cloaking performance of an annular single-layer invisibility cloak of smoothly varying diffusivity in two dimensions. Near-perfect cloaking is achieved under the Ito convention, indicated by the cloak preventing particles from accessing an inner core without disturbing the particle density outside the cloak. The cloak's performance can be further improved by regularising its singular behaviour. We believe our demonstration of stochastic cloaking is a significant milestone, comparable to earlier developments that extended cloaking from optics and acoustics to thermodynamics.

cond-mat.mtrl-sci↗

arXiv2024

Robust Quasi-Bound States in the continuum: Accidental and Symmetry-Protected Variants in Dielectric Metasurfaces

Recently, man-made dielectric materials composed of finite-sized dielectric constituents have emerged as a promising platform for quasi-bound states in the continuum (QBICs). These states allow for an extraordinary confinement of light within regions smaller than the wavelength scale. Known for their exceptional quality factors, they have become crucial assets across a diverse array of applications. Given the circumstances, there is a compelling drive to find meta-designs that can possess multiple QBICs. Here, we demonstrate the existence of two different types of QBICs in silicon-based metasurfaces: accidental QBIC and symmetry-protected QBIC. The accidental QBIC evinces notable resilience to variations in geometrical parameters and symmetry, underscoring its capacity to adeptly navigate manufacturing tolerances while consistently upholding a distinguished quality factor of $10^5$. Conversely, the symmetry-protected QBIC inherently correlates with the disruption of unit cell symmetry. As a result, a phase delay yields an efficient channel for substantial energy transference to the continuum, endowing this variant with an exceedingly high quality factor, approaching $10^8$. Moreover, the manifestation of these QBICs stems from the intricate interplay among out-of-plane electric and magnetic dipoles, alongside in-plane quadrupoles exhibiting odd parities.

cond-mat.mtrl-sci↗

arXiv2022

Dynamic cloaking of a diamond-shaped hole in elastic plate

Invisibility cloaks for flexural waves have been mostly examined in the continuous-wave regime, while invisibility is likely to deteriorate for short pulses. Here, we propose the practical realization of a unidirectional invisibility cloak for flexural waves based on an area-preserving coordinate transformation. Time-resolved experiments reveal how the invisibility cloak deviates a pulsed plane-wave from its initial trajectory, and how the initial wavefront perfectly recombines behind the cloak, leaving the diamond-shaped hole invisible, notwithstanding the appearance of a forerunner. Three-dimensional full-elasticity simulations support our experimental observations.

physics.class-ph↗

arXiv2022

Asymmetric Heat Transfer with Linear Conductive Metamaterials

Asymmetric heat transfer systems, often referred to as thermal diodes or thermal rectifiers, have garnered increasing interest due to their wide range of application possibilities. Most of those previous macroscopic thermal diodes either resort to nonlinear thermal conductivities with strong temperature dependence that may be quite limited by or fixed in natural materials or rely on active modulation that necessitated auxiliary energy payloads. Here, we establish a straightforward strategy of passively realizing asymmetric heat transfer with linear conductive materials. The strategy also introduces a new interrogative perspective on the design of asymmetric heat transfer utilizing nonlinear thermal conductivity, correcting the misconception that thermal rectification is impossible with separable nonlinear thermal conductivity. The nonlinear perturbation mode can be versatilely engineered to produce an effective and wide-ranging perturbation in the heat conduction, which imitates and bypasses intrinsic thermal nonlinearity constraints set by naturally occurring counterparts. Independent experimental characterizations of surface thermal radiation and thermal convection verified that the heat exchange between a graded linear thermal metamaterial and the ambient can be tailored to achieve macroscopic asymmetric heat transfer. Our work is envisaged to inspire conceptual models for heat transfer control, serving as a robust and convenient platform for advanced thermal management, thermal computation, and heat transport.

physics.app-ph↗

arXiv2022

Two-scale cut-and-projection convergence for quasiperiodic monotone operators

Averaging certain class of quasiperiodic monotone operators can be simplified to the periodic homogenization setting by mapping the original quasiperiodic structure onto a periodic structure in a higher dimensional space using cut-and projection method. We characterize cut-and-projection convergence limit of the nonlinear monotone partial differential operator $-\mathrm{div} \; \sigma\left({\bf x},\frac{{\bf R}{\bf x}}{\eta}, \nabla u_\eta\right)$ for a bounded sequence $u_\eta$ in $W^{1,p}_0(\Omega)$, where $1<p < \infty$, $\Omega$ is a bounded open subset in $R^n$ with Lipschitz boundary. We identify the homogenized problem with a local equation defined on the hyperplane in the higher-dimensional space. A new corrector result is established.

math.AP↗

arXiv2021

Transformation design of in-plane elastic cylindrical cloaks, concentrators and lenses

We analyse the elastic properties of a class of cylindrical cloaks deduced from linear geometric transforms ${\bf x} \to {\bf x}'$ in the framework of the Milton-Briane- Willis cloaking theory [New Journal of Physics 8, 248, 2006]. More precisely, we assume that the mapping between displacement fields ${\bf u}({\bf x}) \to {\bf u}'({\bf x}')$ is such that ${\bf u}'({\bf x}') = {\bf A}^{-t}{\bf u}({\bf x})$, where ${\bf A}$ is either the transformation gradient $F_{ij} = \partial x'_i/ \partial x_j$ or the second order identity tensor ${\bf I}$. The nature of the cloaks under review can be three-fold: some of them are neutral for a source located a couple of wavelengths away; other lead to either a mirage effect or a field confinement when the source is located inside the concealment region or within their coated region (some act as elastic concentrators squeezing the wavelength of a pressure or shear polarized incident plane wave in their core); a last category of cloaks is classified as an elastic counterpart of electromagnetic perfect cylindrical lenses. The former two categories require either rank-4 elastic tensor and rank-2 density tensor and additional rank-3 and 2 positive definite tensors $({\bf A} = {\bf F})$ or a rank 4 elasticity tensor and a scalar density $({\bf A} = {\bf I})$ with spatially varying positive values. However, the latter example further requires that all rank-4, 3 and 2 tensors be negative definite $({\bf A} = {\bf F})$ or that the elasticity tensor be negative definite (and non fully symmetric) as well as a negative scalar density $({\bf A} = {\bf I})$. We provide some illustrative numerical examples with the Finite Element package Comsol Multiphysics when ${\bf A}$ is the identity.

cond-mat.mtrl-sci↗

arXiv2021

Pulse dynamics of flexural waves in transformed plates

Coordinate-transformation-inspired optical devices have been mostly examined in the continuous-wave regime: the performance of an invisibility cloak, which has been demonstrated for monochromatic excitation, %would inevitably is likely to deteriorate for short pulses. Here we investigate pulse dynamics of flexural waves propagating in transformed plates. We propose a practical realization of a waveshifter and a rotator for flexural waves based on the coordinate transformation method. Time-resolved measurements reveal how the waveshifter deviates a short pulse from its initial trajectory, with no reflection at the bend and no spatial and temporal distortion of the pulse. Extending our strategy to cylindrical coordinates, we design a wave rotator. We demonstrate experimentally how a pulsed plane wave is twisted inside the rotator, while its wavefront is recovered behind the rotator and the pulse shape is preserved, with no extra time delay. We propose the realization of the dynamical mirage effect, where an obstacle appears oriented in a deceptive direction.

physics.class-ph↗

arXiv2020

Time-domain investigation of a cylindrical acoustic external cloak

Space folding techniques based on non-monotonic transforms lead to a new class of cylindrical isotropic acoustic cloaks with a constant negative density and a spatially varying negative bulk modulus. We consider an external cloak consisting of a core with a positive definite density matrix and a positive compressibility, and a shell with simultaneously negative density and compressibility. Such a core-shell resonant system creates a virtual folded region outside the shell. To handle such negative physical parameters in the time-domain, a two-step strategy is used: (i) assuming resonant (Drude-type) effective parameters in the frequency-domain; (ii) returning to the time-domain by applying the formalism of the auxiliary fields. We numerically show that, at the designed central frequency, scattering of a cylindrical pressure wave incident upon a finite set of small rigid obstacles is drastically reduced after a lapse of time, when they are placed in the close neighborhood of the external cloak. However, at short times, the external cloak behaves rather like a superscatterer: the cloak itself scatters more than the set of scatterers.

physics.comp-ph↗

arXiv2020

Localising elastic edge waves via the topological rainbow effect

We combine two different fields, topological physics and graded metamaterials to design a topological metasurface to control and redirect elastic waves. We strategically design a two-dimensional crystalline perforated elastic plate, using a square lattice, %consisting of bore holes, that hosts symmetry-induced topological edge states. By concurrently allowing the elastic substrate to spatially vary in depth, we are able to convert the incident slow wave into a series of robust modes, with differing envelope modulations. This adiabatic transition localises the incoming energy into a concentrated region where it can then be damped or extracted. For larger transitions, different behaviour is observed; the incoming energy propagates along the interface before being partitioned into two disparate chiral beams. This "topological rainbow" effect leverages two main concepts, namely the quantum valley-Hall effect and the rainbow effect usually associated with electromagnetic metamaterials. The topological rainbow effect transcends specific physical systems, hence, the phenomena we describe can be transposed to other wave physics. Due to the directional tunability of the elastic energy by geometry our results have far-reaching implications for applications such as switches, filters and energy-harvesters.

physics.app-ph↗

arXiv2020

The influence of structure geometry and material on seismic metamaterial performance

Diverting, and controlling, elastic vibrations impacting upon infrastructure is a major challenge for seismic hazard mitigation, and for the reduction of machine noise and vehicle vibration in the urban environment. Seismic metamaterials (SMs), with their inherent ability to manipulate wave propagation, provide a key route for overcoming the technological hurdles involved in this challenge. Engineering the structure of the SM serves as a basis to tune and enhance its functionality, and inspired by split rings, swiss-rolls, notch-shaped and labyrinthine designs of elementary cells in electromagnetic and mechanical metamaterials, we investigate altering the structure geometries of SMs with the aim of creating large bandgaps \textcolor{black}{in a subwavelength regime}. We show that square stiff inclusions, perform better in comparison to circular ones, whilst keeping the same filling fraction. En route to enhancing the bandgap, we have also studied the performance of SMs with different constituent materials; we find that steel columns, as inclusions, show large bandgaps, however, the columns are too large for steel to be a feasible material in practical or financial terms. Non-reinforced concrete would be preferable for industry level scaling up of the technology because, concrete is cost-effective, easy to cast directly at the construction site and easy to provide arbitrary geometry of the structure. As a part of this study, we show that concrete columns can also be designed to exhibit bandgaps if we cast them within a soft soil coating surrounding the protected area for various civil structures like a bridge, building, oil pipelines etc.

physics.app-ph↗

arXiv2020

On the possibility of seismic rogue waves in very soft soils

Liquid wave studies have shown that under certain constructive interference conditions, an abnormal size wave could be generated at a specific point. This type of wave, described long ago in the literature, was named 'Draupner Wave' in 1995. It was the first rogue wave, more than ten meters high, to be detected by a measuring instrument, occurring at the Draupner platform in the North Sea off the coast of Norway. For very soft and thick soils in continental sedimentary basin, with high water content, low shear wave velocity and wave bouncing effects on the edges of the basin, one can question the theoretical existence of such a type of freak waves that may have come unnoticed amongst surface seismic waves. This short communication presents recent observations and the conditions and limits of the analogy between gravity and seismic waves.

physics.geo-ph↗

arXiv2020

Scattering Cancellation Technique for Acoustic Spinning Objects

The scattering cancellation technique (SCT) has proved to be an effective way to render static objects invisible to electromagnetic and acoustic waves. However, rotating cylindrical or spherical objects possess additional peculiar scattering features that cannot be cancelled by regular SCT-based cloaks. Here, a generalized SCT theory to cloak spinning objects, and hide them from static observers, based on rotating shells with different angular velocity is discussed. This concept is analytically and numerically demonstrated in the case of cylinders, showing that generalized SCT operates efficiently in making rotating objects appear static to an external observer. Our proposal extends the realm of SCT, and brings it one step closer to its practical realization that involves moving objects.

physics.class-ph↗

arXiv2019

The role of seismic metamaterials on soil dynamics

Some properties of electromagnetic metamaterials have been translated, using some wave analogies, to surface seismic wave control in sedimentary soils structured at the meter scale. Two large scale experiments performed in 2012 near the French cities of Grenoble [Brule et al., PRL 112, 133901, 2014] and Lyon [Brule et al., Sci. Rep. 7, 18066, 2017] have confirmed the usefulness of this methodology and its potential influence on soil-structure interaction. We present here a new perspective on the in-situ experiment near Lyon, which unveils energy corridors in the seismic lens. We further introduce a concept of time-modulated seismic metamaterial underpined by an effective model based on Willis's equations. As a first application, we propose that ambient seismic noise time-modulates structured soils that can be viewed as moving media. In the same spirit, a design of an analogous seismic computer is proposed making use of ambient seismic noise. Seismic signals transmitted between remote seismic computers can help forming an Internet of Things. We further recall that ancient Roman theaters and forests of trees are examples of large scale structures that behave in a way similar to electromagnetic metamaterials: invisibility cloaks and rainbows, respectively. Seismic metamaterials can thus not only be implemented for shielding, lensing and cloaking of potentially deleterious Rayleigh waves, but they also have potential applications in energy harvesting and analogous computations using ambient seismic noise and this opens new vistas in seismic energy harvesting via natural or artificial soil structuring.

physics.geo-ph↗

arXiv2019

Cloaking in-plane elastic waves with swiss rolls

We propose a design of cylindrical elastic cloak for coupled in-plane shear waves consisting of concentric layers of sub-wavelength resonant stress-free inclusions shaped as swiss-rolls. The scaling factor between inclusions' sizes is according to Pendry's transform. Unlike the hitherto known situations, the present geometric transform starts from a Willis medium and further assumes that displacement fields ${\bf u}$ in original medium and ${\bf u}'$ in transformed medium remain unaffected (${\bf u}'={\bf u}$), and this breaks the minor-symmetries of the rank-4 and rank-3 tensors in the Willis equation that describes the transformed effective medium. We achieve some cloaking for a shear polarized source at specific, resonant sub-wavelength, frequencies, when it is located near a clamped obstacle surrounded by the structured cloak. Such an effective medium allows for strong Willis coupling [Quan et al., Physical Review Letters {\bf 120}(25), 254301 (2018)], notwithstanding potential chiral elastic effects [Frenzel et al., Science {\bf 358}(6366), 1072 (2017)], and thus mitigates roles of Willis and Cosserat media in the achieved elastodynamic cloaking.

physics.comp-ph↗

arXiv2019

Wavelet-based Edge Multiscale Finite Element Method for Helmholtz problems in perforated domains

We introduce a new efficient algorithm for Helmholtz problems in perforated domains with the design of the scheme allowing for possibly large wavenumbers. Our method is based upon the Wavelet-based Edge Multiscale Finite Element Method (WEMsFEM) as proposed recently in [14]. For a regular coarse mesh with mesh size H, we establish O(H) convergence of this algorithm under the resolution assumption, and with the level parameter being sufficiently large. The performance of the algorithm is demonstrated by extensive 2-dimensional numerical tests including those motivated by photonic crystals.

math.NA↗

arXiv2019

Dynamic behavior of mechanical cloaks designed by direct lattice transformation

Steering waves in elastic solids is more demanding than steering waves in electromagnetism or acoustics. As a result, designing material distributions which are the counterpart of optical invisibility cloaks in elasticity poses a major challenge. Waves of all polarizations should be guided around an obstacle to emerge on the downstream side as though no obstacle were there. Recently, we have introduced the direct-lattice-transformation approach. This simple and explicit construction procedure led to extremely good cloaking results in the static case. Here, we transfer this approach to the dynamic case, i.e., to elastic waves or phonons. We demonstrate broadband reduction of scattering, with best suppressions exceeding a factor of five when using cubic coordinate transformations instead of linear ones. To reliably and quantitatively test these cloaks efficiency, we use an effective-medium approach.

cond-mat.mtrl-sci↗