arXiv subjects

Seiji Mitani

Publications and source records attributed to Seiji Mitani.

At least 37 records · Page 2Linked to original sources

arXiv2017

Nonlinear electric field effect on perpendicular magnetic anisotropy in Fe/MgO interfaces

The electric field effect on magnetic anisotropy was studied in an ultrathin Fe(001) monocrystalline layer sandwiched between Cr buffer and MgO tunnel barrier layers, mainly through post-annealing temperature and measurement temperature dependences. A large coefficient of the electric field effect of more than 200 fJ/Vm was observed in the negative range of electric field, as well as an areal energy density of perpendicular magnetic anisotropy (PMA) of around 600 uJ/m2. More interestingly, nonlinear behavior, giving rise to a local minimum around +100 mV/nm, was observed in the electric field dependence of magnetic anisotropy, being independent of the post-annealing and measurement temperatures. The insensitivity to both the interface conditions and the temperature of the system suggests that the nonlinear behavior is attributed to an intrinsic origin such as an inherent electronic structure in the Fe/MgO interface. The present study can contribute to the progress in theoretical studies, such as ab initio calculations, on the mechanism of the electric field effect on PMA.

cond-mat.mtrl-sci↗

arXiv2017

Electric field modulation of the non-linear areal magnetic anisotropy energy

We study the ferromagnetic layer thickness dependence of the voltage-controlled magnetic anisotropy (VCMA) in gated CoFeB/MgO heterostructures with heavy metal underlayers. When the effective CoFeB thickness is below ~1 nm, the VCMA efficiency of Ta/CoFeB/MgO heterostructures considerably decreases with decreasing CoFeB thickness. We find that a high order phenomenological term used to describe the thickness dependence of the areal magnetic anisotropy energy can also account for the change in the areal VCMA efficiency. In this structure, the higher order term competes against the common interfacial VCMA, thereby reducing the efficiency at lower CoFeB thickness. The areal VCMA efficiency does not saturate even when the effective CoFeB thickness exceeds ~1 nm. We consider the higher order term is related to the strain that develops at the CoFeB/MgO interface: as the average strain of the CoFeB layer changes with its thickness, the electronic structure of the CoFeB/MgO interface varies leading to changes in areal magnetic anisotropy energy and VCMA efficiency.

cond-mat.mtrl-sci↗

arXiv2016

MgGa2O4 spinel barrier for magnetic tunnel junctions: coherent tunneling and low barrier height

Epitaxial Fe/magnesium gallium spinel oxide (MgGa2O4)/Fe(001) magnetic tunnel junctions (MTJs) were fabricated by magnetron sputtering. Tunnel magnetoresistance (TMR) ratio up to 121% at room temperature (196% at 4 K) was observed, suggesting a TMR enhancement by the coherent tunneling effect in the MgGa2O4 barrier. The MgGa2O4 layer had a spinel structure and it showed good lattice matching with the Fe layers owing to slight tetragonal lattice distortion of MgGa2O4. Barrier thickness dependence of the tunneling resistance and current-voltage characteristics revealed that the barrier height of the MgGa2O4 barrier is much lower than that in an MgAl2O4 barrier. This study demonstrates the potential of Ga-based spinel oxides for MTJ barriers having a large TMR ratio at a low resistance area product.

cond-mat.mtrl-sci↗

arXiv2016

Voltage control of magnetic anisotropy in epitaxial Ru/Co2FeAl/MgO heterostructures

Voltage control of magnetic anisotropy (VCMA) in magnetic heterostructures is a key technology for achieving energy-efficiency electronic devices with ultralow power consumption. Here, we report the first demonstration of the VCMA effect in novel epitaxial Ru/Co2FeAl(CFA)/MgO heterostructures with interfacial perpendicular magnetic anisotropy (PMA). Perpendicularly magnetized tunnel junctions with the structure of Ru/CFA/MgO were fabricated and exhibited an effective voltage control on switching fields for the CFA free layer. A large VCMA coefficient of 108 (139) fJ/Vm for the CFA film was achieved at room temperature (4 K). The interfacial stability in the heterostructure was confirmed by repeating measurements. Temperature dependences of both the interfacial PMA and the VCMA effect were also investigated. It is found that the temperature dependences follow power laws of the saturation magnetization with an exponent of ~2. The significant VCMA effect observed in this work indicates that the Ru/CFA/MgO heterostructure could be one of the promising candidates for spintronic devices with voltage control.

cond-mat.mtrl-sci↗

arXiv2016

Effect of Mg-Al insertion on magnetotransport properties in epitaxial Fe/sputter-deposited $MgAl_{2}O_{4}$/Fe(001) magnetic tunnel junctions

We investigated the effect of a Mg-Al layer insertion at the bottom interface of epitaxial Fe/$MgAl_{2}O_{4}$/Fe(001) magnetic tunnel junctions (MTJs) on their spin-dependent transport properties. The tunnel magnetoresistance (TMR) ratio and differential conductance spectra for the parallel magnetic configuration exhibited clear dependence on the inserted Mg-Al thickness. A slight Mg-Al insertion (thickness < 0.1 nm) was effective for obtaining a large TMR ratio above 200% at room temperature and observing a distinct local minimum structure in conductance spectra. In contrast, thicker Mg-Al (> 0.2 nm) induced a reduction of TMR ratios and featureless conductance spectra, indicating a degradation of the bottom-Fe/$MgAl_{2}O_{4}$ interface. Therefore, a minimal Mg-Al insertion was found to be effective to maximize the TMR ratio for a sputtered $MgAl_{2}O_{4}$-based MTJ.

cond-mat.mtrl-sci↗

arXiv2016

Interdiffusion in epitaxial ultrathin Co2FeAl/MgO heterostructures with interface-induced perpendicular magnetic anisotropy

The structures of epitaxial ultrathin Co2FeAl/MgO(001) heterostructures relating to the interface-induced perpendicular magnetic anisotropy (PMA) were investigated using scanning transmission electron microscopy, energy dispersive x-ray spectroscopy, and x-ray magnetic circular dichroism. We found that Al atoms from the Co2FeAl layer significantly interdiffuse into MgO, forming an Al-deficient Co-Fe-Al/Mg-Al-O structure near the Co2FeAl/MgO interface. This atomic replacement may play an additional role for enhancing PMA, which is consistent with the observed large perpendicular orbital magnetic moments of Fe atoms at the interface. This work suggests that control of interdiffusion at ferromanget/barrier interfaces is critical for designing an interface-induced PMA system.

cond-mat.mtrl-sci↗

arXiv2016

Current-Induced Instability of a Perpendicular Ferromagnet in Spin Hall Geometry

We develop a theoretical formula of spin Hall torque in the presence of two ferromagnets. While the direction of the conventional spin Hall torque always points to the in-plane direction, the present system enables to manipulate the torque direction acting on one magnetization by changing the direction of another magnetization. Based on the diffusion equation of the spin accumulation and the Landauer formula, we derive analytical formula of the spin Hall torque. The present model provides a solution to switch a perpendicular ferromagnet deterministically at zero field using the spin Hall effect.

cond-mat.mes-hall↗

arXiv2016

Spin Hall magnetoresistance in metallic bilayers

Spin Hall magnetoresistance (SMR) is studied in metallic bilayers that consist of heavy metal (HM) layer and a ferromagnetic metal (FM) layer. We find nearly a ten-fold increase of SMR in W/CoFeB compared to previously studied HM/ferromagnetic insulator (FI) systems. The SMR increases with decreasing temperature despite the negligible change in the W layer resistivity with temperature. A model is developed to account for the absorption of the longitudinal spin current to the FM layer, one of the key characteristics of a metallic ferromagnet. We find that the model not only quantitatively describes the HM layer thickness dependence of SMR, allowing accurate estimation of the spin Hall angle and the spin diffusion length of the HM layer, but also can account for the temperature dependence of SMR by assuming a temperature dependent spin polarization of the FM layer. These results illustrate the unique role a metallic ferromagnetic layer plays in defining spin transmission across the HM/FM interface.

cond-mat.mes-hall↗

arXiv2016

Spin-orbit torque in Cr/CoFeAl/MgO and Ru/CoFeAl/MgO epitaxial magnetic heterostructures

We study the spin-orbit torque (SOT) effective fields in Cr/CoFeAl/MgO and Ru/CoFeAl/MgO magnetic heterostructures using the adiabatic harmonic Hall measurement. High-quality perpendicular-magnetic-anisotropy CoFeAl layers were grown on Cr and Ru layers. The magnitudes of the SOT effective fields were found to significantly depend on the underlayer material (Cr or Ru) as well as their thicknesses. The damping-like longitudinal effective field (ΔH_L) increases with increasing underlayer thickness for all heterostructures. In contrast, the field-like transverse effective field (ΔH_T) increases with increasing Ru thickness while it is almost constant or slightly decreases with increasing Cr thickness. The sign of ΔH_L observed in the Cr-underlayer devices is opposite from that in the Ru-underlayer devices while ΔH_T shows the same sign with a small magnitude. The opposite directions of ΔHL indicate that the signs of spin Hall angle in Cr and Ru are opposite, which are in good agreement with theoretical predictions. These results show sizable contribution from SOT even for elements with small spin orbit coupling such as 3d Cr and 4d Ru.

cond-mat.mtrl-sci↗

arXiv2015

Correlation between the spin Hall angle and the structural phases of early 5d transition metals

We have studied the relationship between the structure and the spin Hall angle of the early 5d transition metals in X/CoFeB/MgO (X=Hf, Ta, W, Re) heterostructures. Spin Hall magnetoresistance (SMR) is used to characterize the spin Hall angle of the heavy metals. Transmission electron microscopy images show that all underlayers are amorphous-like when their thicknesses are small, however, crystalline phases emerge as the thickness is increased for certain elements. We find that the heavy metal layer thickness dependence of the SMR reflects these changes in structure. The spin Hall angle largest |θ$_{SH}$| of Hf, Ta, W and Re (~0.11, 0.10, 0.23 and 0.07, respectively) is found when the dominant phase is amorphous-like. We find that the amorphous-like phase not only possesses large resistivity but also exhibits sizeable spin Hall conductivity, which both contribute to the emergence of the large spin Hall angle.

cond-mat.mtrl-sci↗

arXiv2015

Enhanced orbital magnetic moments in magnetic heterostructures with interface perpendicular magnetic anisotropy

We have studied the magnetic layer thickness dependence of the orbital magnetic moment in magnetic heterostructures to identify contributions from interfaces. Three different heterostructures, Ta/CoFeB/MgO, Pt/Co/AlO$_x$ and Pt/Co/Pt, which possess significant interface contribution to the perpendicular magnetic anisotropy, are studied as model systems. X-ray magnetic circular dichroism spectroscopy is used to evaluate the relative orbital moment, i.e. the ratio of the orbital to spin moments, of the magnetic elements constituting the heterostructures. We find that the relative orbital moment of Co in Pt/Co/Pt remains constant against its thickness whereas the moment increases with decreasing Co layer thickness for Pt/Co/AlO$_x$, suggesting that a non-zero interface orbital moment exists for the latter system. For Ta/CoFeB/MgO, a non-zero interface orbital moment is found only for Fe. X-ray absorption spectra shows that a particular oxidized Co state in Pt/Co/AlO$_x$, absent in other heterosturctures, may give rise to the interface orbital moment in this system. These results show element specific contributions to the interface orbital magnetic moments in ultrathin magnetic heterostructures.

cond-mat.mtrl-sci↗

arXiv2015

Critical current destabilizing perpendicular magnetization by the spin Hall effect

The critical current needed to destabilize the magnetization of a perpendicular ferromagnet via the spin Hall effect is studied. Both the dampinglike and fieldlike torques associated with the spin current generated by the spin Hall effect is included in the Landau-Lifshitz-Gilbert equation to model the system. In the absence of the fieldlike torque, the critical current is independent of the damping constant and is much larger than that of conventional spin torque switching of collinear magnetic systems, as in magnetic tunnel junctions. With the fieldlike torque included, we find that the critical current scales with the damping constant as $α^{0}$ (i.e., damping independent),$α$, and $α^{1/2}$ depending on the sign of the fieldlike torque and other parameters such as the external field. Numerical and analytical results show that the critical current can be significantly reduced when the fieldlike torque possesses the appropriate sign, i.e. when the effective field associated with the fieldlike torque is pointing opposite to the spin direction of the incoming electrons. These results provide a pathway to reducing the current needed to switch magnetization using the spin Hall effect.

cond-mat.mes-hall↗

arXiv2015

Current driven asymmetric magnetization switching in perpendicularly magnetized CoFeB/MgO heterostructures

The flow of in-plane current through ultrathin magnetic heterostructures can cause magnetization switching or domain wall nucleation owing to bulk and interfacial effects. Within the magnetic layer, the current can create magnetic instabilities via spin transfer torques (STT). At interface(s), spin current generated from the spin Hall effect in a neighboring layer can exert torques, referred to as the spin Hall torques, on the magnetic moments. Here, we study current induced magnetization switching in perpendicularly magnetized CoFeB/MgO heterostructures with a heavy metal (HM) underlayer. Depending on the thickness of the HM underlayer, we find distinct differences in the inplane field dependence of the threshold switching current. The STT is likely responsible for the magnetization reversal for the thinner underlayer films whereas the spin Hall torques cause the switching for thicker underlayer films. For the latter, we find differences in the switching current for positive and negative currents and initial magnetization directions. We find that the growth process during the film deposition introduces an anisotropy that breaks the symmetry of the system and causes the asymmetric switching. The presence of such symmetry breaking anisotropy enables deterministic magnetization switching at zero external fields.

cond-mat.mtrl-sci↗

arXiv2014

A 4-fold-symmetry hexagonal ruthenium for magnetic heterostructures exhibiting enhanced perpendicular magnetic anisotropy and tunnel magnetoresistance

An unusual crystallographic orientation of hexagonal Ru with a 4-fold symmetry emerging in epitaxial MgO/Ru/Co2FeAl/MgO heterostructures is reported, in which an approximately Ru(02-23) growth attributes to the lattice matching among MgO, Ru, and Co2FeAl. Perpendicular magnetic anisotropy of the Co2FeAl/MgO interface is substantially enhanced as compared with those with a Cr(001) layer. The MTJs incorporating this structure gave rise to the largest tunnel magnetoresistance for perpendicular MTJs using low damping Heusler alloys. The 4-fold-symmetry hexagonal Ru arises from an epitaxial growth with an unprecedentedly high crystal index, opening a unique pathway for the development of perpendicular anisotropy films of cubic and tetragonal ferromagnetic alloys.

cond-mat.mtrl-sci↗

arXiv2014

Tunnel magnetoresistance and spin-transfer-torque switching in polycrystalline Co2FeAl full-Heusler alloy magnetic tunnel junctions on Si/SiO2 amorphous substrates

We studied polycrystalline B2-type Co2FeAl (CFA) full-Heusler alloy based magnetic tunnel junctions (MTJs) fabricated on a Si/SiO2 amorphous substrate. Polycrystalline CFA films with a (001) orientation, a high B2 ordering, and a flat surface were achieved using a MgO buffer layer. A tunnel magnetoresistance (TMR) ratio up to 175% was obtained for an MTJ with a CFA/MgO/CoFe structure on a 7.5-nm-thick MgO buffer. Spin-transfer torque induced magnetization switching was achieved in the MTJs with a 2-nm-thick polycrystalline CFA film as a switching layer. Using a thermal activation model, the intrinsic critical current density (Jc0) was determined to be 8.2 x 10^6 A/cm^2, which is lower than 2.9 x 10^7 A/cm^2, the value for epitaxial CFA-MTJs [Appl. Phys. Lett. 100, 182403 (2012)]. We found that the Gilbert damping constant evaluated using ferromagnetic resonance measurements for the polycrystalline CFA film was ~0.015 and was almost independent of the CFA thickness (2~18 nm). The low Jc0 for the polycrystalline MTJ was mainly attributed to the low damping of the CFA layer compared with the value in the epitaxial one (~0.04).

cond-mat.mtrl-sci↗

arXiv2014

Anomalous temperature dependence of current induced torques in CoFeB|MgO heterostructures with Ta based underlayers

We have studied the underlayer thickness and temperature dependences of the current induced effective field in CoFeB|MgO heterostructures with Ta based underlayers. The underlayer thickness at which the effective field saturates is found to be different between the two orthogonal components of the effective field, i.e. the damping-like term tends to saturate at smaller underlayer thickness than the field-like term. For large underlayer thickness films in which the effective field saturates, we find that the temperature significantly influences the size of the effective field. A striking difference is found in the temperature dependence of the two components: the damping-like term decreases whereas the field-like term increases with increasing temperature. Using a simple spin diffusion-spin transfer model, we find that all of these results can be accounted for provided the real and imaginary parts of an effective spin mixing conductance are negative. These results imply that either spin transport in this system is different from conventional metallic interfaces or effects other spin diffusion into the magnetic layer need to be taken account in order to model the system accurately.

cond-mat.mes-hall↗

arXiv2014

Interface control of the magnetic chirality in CoFeB|MgO heterosctructures with heavy metal underlayers

Recent advances in the understanding of spin orbital effects in ultrathin magnetic heterostructures have opened new paradigms to control magnetic moments electrically. The Dzyaloshinskii-Moriya interaction (DMI) is said to play a key role in forming a Neel-type domain wall that can be driven by the spin Hall torque, a torque resulting from the spin current generated in a neighboring non-magnetic layer via the spin Hall effect. Here we show that the strength and sign of the DMI can be changed by modifying the adjacent heavy metal underlayer (X) in perpendicularly magnetized X|CoFeB|MgO heterstructures. Albeit the same spin Hall angle, a domain wall moves along or against the electron flow depending on the underlayer. We find that the sense of rotation of a domain wall spiral11 is reversed when the underlayer is changed from Hf to W and the strength of DMI varies as the number of 5d electrons of the heavy metal layer changes. The DMI can even be tuned by adding nitrogen to the underlayer, thus allowing interface engineering of the magnetic texture in ultrathin magnetic heterostructures.

cond-mat.mes-hall↗

arXiv2013

Interface control of the magnetic chirality in TaN|CoFeB|MgO heterosctructures

Recent advances in the understanding of spin orbital effects in ultrathin magnetic heterostructures have opened new paradigms to control magnetic moments electrically. The Dzyaloshinskii-Moriya interaction (DMI) is said to play a key role in forming a Neel-type domain wall that can be driven by the spin Hall torque, a torque resulting from the spin current generated in a neighboring non-magnetic layer via the spin Hall effect. Here we show that the sign of the DMI, which determines the direction to which a domain wall moves with current, can be changed by modifying the adjacent non-magnetic layer. We find that the sense of rotation of a domain wall spiral is reversed when the Ta underlayer is doped with nitrogen in Ta|CoFeB|MgO heterostructures. The spin Hall angle of the Ta and nitrogen doped Ta underlayers carry the same sign, suggesting that the sign of the DMI is defined at the interface. Depending on the sense of rotation, spin transfer torque and spin Hall torque can either compete or assist each other, thus influencing the efficiency of moving domain walls with current.

cond-mat.mes-hall↗