SearcharxivSearch

arXiv subjects

Senlin Huang

Publications and source records attributed to Senlin Huang.

14 recordsLinked to original sources

Sub-50 Picosecond exceptionally Bright Perovskite Scintillation by Unlocking Giant Oscillator Strength

Ultrafast scintillators are indispensable for precise timing in high-energy physics and medical diagnostics. Fundamentally constrained by the trade-off between emission rate and light yield, conventional scintillators remain kinetically trapped in the sub-nanosecond regime, failing to break 50-picosecond limit. Here, we demonstrate a strategy to bypass this limitation by harnessing the coherent radiative acceleration in weakly confined CsPbCl3 perovskite nanocrystals to generate an ultrafast photon burst. This effect originates from the giant oscillator strength, which we unlock by suppressing exciton-phonon scattering at mild cryogenic temperatures. Consequently, our scintillator achieves an unprecedented dominant lifetime of 13.11 ps alongside a high light yield of 21,851 ph/MeV. The resulting prompt photon emission rate more than 100 times higher than that of state-of-the-art ultrafast scintillators. We validate this breakthrough in realistic detection scenarios, achieving a coincidence time resolution of 30.8 ps and accurately resolving 13.5 ps electron bunches and 16.6 ps single-shot gamma-ray pulses. Our findings establish a robust coherent framework for next-generation ultrafast scintillators, pushing extreme radiation diagnostics into the picosecond frontier.

cond-mat.mes-hall

Geometric quantification of photonic 4D spin-orbit states

High-dimensional photonic states have significantly advanced the fundamentals and applications of light. However, it remains huge challenges to quantify arbitrary states in high-dimensional Hilbert spaces with spin and orbital angular momentum bases. Here we introduce a geometric method to quantify arbitrary states in a 4D Hilbert space by interferometrically mapping them to unified centroid ellipses. Specifically, nine Stokes parameters can be deduced from three ellipses to quantify the 4D spin-orbit states described by SU(4) Poincar\'e hypersphere. We verify its feasibility by detecting these spin-orbit states gotten by both free-space wave plates and few-mode fibers. For the first time, we completely quantify and reconstruct higher-order modal group evolution of a weakly guiding few-mode fiber under twist perturbation. This geometric quantification, beyond the classical Stokes polarimetry, may pave the way to multi-dimensional optical metrology, sensing, and high-dimensional classical or quantum communications.

physics.optics

Dependence of the Radical Dynamics on the Beam Temporal Profile in FLASH Radiotherapy

Purpose: This study aims to investigate the impact of the beam temporal profile on the radical dynamics and inter-track interactions of FLASH radiotherapy, supporting parameter optimization for the equipment development and clinical implementation. Methods: MonteCarlo simulations based on the IRT method were performed to analyze the dynamics after irradiation, including single-pulse or multi-pulses irradiation, pulse repetition rate, width and dose. The physicochemical experiments were performed to measure the eaq-lifetimes for validation. The generation and recombination of OH and eaq-radicals were recorded under 6 MeV electron irradiation with varying beam temporal profiles. The radial distributions of the radicals were statistically analyzed, and the corresponding LETd and LETt were calculated. The inter-track interactions were assessed through a mathematical model. Results: The spatial distribution and temporal evolution of radicals were significantly affected by the beam time profiles. Compared with multi-pulses irradiation, single-pulse mode with a width less than 1/10 of the radical lifetime, a repetition interval longer than the radical lifetime, and a dose exceeding 1 Gy/pulse can lead to radicals rapid consumption, reducing the residual content. Instantaneous high dose rates induced radical tracks overlaps. When the single-pulse dose exceeded 1 Gy, the overlap probability approached 100%, aligning with the threshold for radical instantaneous combination. Conclusion: Under a low-duty cycle and high instantaneous dose-rate time profile, the radicals were rapidly consumed through track overlap hence reduced damage to normal tissues, inducing FLASH effect. The optimized time profile can be used to guide the development of equipment and parameter settings in clinical practice to maximize the FLASH effect, such as the laser accelerators and superconducting photocathode guns.

physics.med-ph

Dosimetry study of high repetition rate MeV electron beam from a continuous-wave photocathode gun

DC-SRF-II gun, a high-brightness continuous-wave photocathode gun, has greater potential in electron beam irradiation applications. This paper presents the in-vacuum and in-air irradiation dosimetry study of the high repetition rate electron beam from the DC-SRF-II gun with both Monte Carlo simulations and experiments. Especially, high-dose uniform irradiations with flexible and accurate tuning of dose rate across orders of magnitude are demonstrated. Good stability and repeatability of the doses are also shown. The ultra-wide tuning range and precise control of irradiation time and dose rate are expected to pave the way for innovative applications across a wide range of fields.

physics.acc-ph

Cavity as Radio Telescope for Galactic Dark Photon

Dark photons, as a minimal extension of the Standard Model through an additional Abelian gauge group, may propagate relativistically across the galaxy, originating from dark matter decay or annihilation, thereby contributing to a galactic dark photon background. The generation of dark photons typically favors certain polarization modes, which are dependent on the interactions between dark matter and dark photons. We introduce a framework in which a resonant cavity is utilized to detect and differentiate these polarizations, leveraging the daily variation in expected signals due to the anisotropic distribution of dark photons and the rotation of the Earth. We conduct an experimental search using superconducting radio-frequency cavities, noted for their exceptionally high quality factors, proving them to be effective telescopes for observing galactic dark photons. This approach establishes the most stringent limits yet on the kinetic mixing coefficient between dark photons and electromagnetic photons, thereby unveiling a novel avenue for the indirect search for dark matter via multi-messenger astronomy.

hep-ph

First Scan Search for Dark Photon Dark Matter with a Tunable Superconducting Radio-Frequency Cavity

Dark photons have emerged as promising candidates for dark matter, and their search is a top priority in particle physics, astrophysics, and cosmology. We report the first use of a tunable niobium superconducting radio-frequency cavity for a scan search of dark photon dark matter with innovative data analysis techniques. We mechanically adjusted the resonant frequency of a cavity submerged in liquid helium at a temperature of $2$ K, and scanned the dark photon mass over a frequency range of $1.37$ MHz centered at $1.3$ GHz. Our study leveraged the superconducting radio-frequency cavity's remarkably high quality factors of approximately $10^{10}$, resulting in the most stringent constraints to date on a substantial portion of the exclusion parameter space on the kinetic mixing coefficient $\epsilon$ between dark photons and electromagnetic photons, yielding a value of $\epsilon < 2.2 \times 10^{-16}$.

hep-ex

A high repetition rate picosecond LiNbO3 THz parametric amplifier and the parametric gain study

A high repetition rate, picosecond THz parametric amplifier (TPA) with a LiNbO3 (LN) crystal has been demonstrated in this work. At 10 kHz repetition rate, a peak power of 200 W and an average power of 12 μW have been obtained over a wide range around 2 THz; at 100 kHz repetition rate, a maximum peak power of 18 W and average power of 10.8 μW have been obtained. The parametric gain of the LN crystal was also investigated and a modified Schwarz-Maier model was introduced to interpret the experimental results.

physics.optics

Highly stable linearly polarized arbitrary temporal shaping of picosecond laser pulses

This paper reports the study and demonstration of a new variable temporal shaping method capable of generating linearly polarized picosecond laser pulses with arbitrary predefined shapes, which are highly desired by various applications including low emittance high brightness electron bunch generation in photocathode guns. It is found that both high transmittance and high stability of the shaped pulses can be achieved simultaneously when birefringent stages (BSs) are set at specific phase delay. Such variable temporal shaping technique may lead to new opportunities for many potential applications over a wide range of laser wavelengths, pulse repetition rates, time structures and power levels, etc. In addition, a new double-pass variable temporal shaping method is also proposed and could significantly simplify the shaper structure and reduce the cost.

physics.optics

Linearly polarized picosecond pulse shaping with variable profiles by a birefringent shaper

This paper describes the demonstration of linearly polarized picosecond pulse shaping with variable profiles including symmetric and non-symmetric intensity distributions. Important characteristics such as stability and transmission were studied, resulting in highly reliable performance of this fan-type birefringent shaping system. This variable temporal shaping technique is applicable over a wide range of laser parameters and may lead to new opportunities for many potential applications. A new double-pass variable temporal shaping method that significantly reduces the required crystal quantity is also proposed in this paper.

physics.optics

Generation of picosecond pulses with variable temporal profiles and linear polarization by coherent pulse stacking in a birefringent crystal shaper

We report the study and demonstration of a new laser pulse shaping system capable of generating linearly polarized picosecond laser pulses with variable temporal profiles including symmetric intensity distributions such as parabolic, flattop, elliptical, triangular, as well as non-symmetric distributions, which are highly desired by various applications. It is found that both high transmittance and high stability of the shaped pulse can be achieved simultaneously when crystals are set at a specific phase delay through fine control of the crystal temperature. Although multi-crystal pulse stacking with different configurations were reported before particularly for flattop pulse generation, this new configuration leads to new opportunities for many potential applications over a wide range of laser wavelengths, pulse repetition rate, time structures and power levels. A practical double-pass temporal shaping configuration that significantly reduces the number of crystals is also proposed in this paper as a result of this work.

physics.optics

Electron Bunch Train Excited Higher-Order Modes in a Superconducting RF Cavity

Higher-order mode (HOM) based intra-cavity beam diagnostics has been proved effectively and conveniently in superconducting radio-frequency (SRF) accelerators. Our recent research shows that the beam harmonics in the bunch train excited HOM spectrum, which have much higher signal-to-noise ratio than the intrinsic HOM peaks, may also be useful for beam diagnostics. In this paper, we will present our study on bunch train excited HOMs, including the theoretic model and recent experiments carried out based on the DC-SRF photoinjector and SRF linac at Peking University.

physics.acc-ph

Self-Seeded FEL Wavelength Extension with High-Gain Harmonic Generation

We study a self-seeded high-gain harmonic generation (HGHG) free-electron laser (FEL) scheme to extend the wavelength of a soft X-ray FEL. This scheme uses a regular self-seeding monochromator to generate a seed laser at the wavelength of 1.52 nm, followed by a HGHG configuration to produce coherent, narrow-bandwidth harmonic radiations at the GW level. The 2nd and 3rd harmonic radiation are investigated with start-to-end simulations. Detailed studies on the FEL performance and shot-to-shot fluctuations are presented.

physics.acc-ph

Drive laser system for the DC-SRF photoinjector at Peking University

Photoinjectors are widely used for linear accelerators as electron sources to generate high-brightness electron beam. Drive laser, which determines the timing structure and quality of the electron beam, is a crucial device of photoinjector. A new drive laser system has been designed and constructed for the upgraded 3.5-cell DC-SRF photoinjector at Peking University. The drive laser system consists of a 1064 nm laser oscillator, a four- stage amplifier, the second and fourth harmonic generators, the optical system to transfer the UV pulses to the photocathode, and the synchronization system. The drive laser system has been successfully applied in the stable operation of DC-SRF photoinjector and its performance meets the requirements. 266 nm laser with an average power close to 1W can be delivered to illuminate the Cs2Te photocathode and the instability is less than 5% for long time operation. The design consideration for improving the UV laser quality, a detailed description of laser system, and its performance are presented in this paper.

physics.acc-ph

Beam breakup simulation study for high energy ERL

The maximum beam current can be accelerated in an Energy Recovery Linac (ERL) can be severely limited by the transverse multi-pass beam breakup instability (BBU), especially in future ERL light sources with multi-GeV high energy beam energy and more than 100 mA average current. In this paper, the multi-pass BBU of such a high energy ERL is studied based on the simulation on a 3-GeV ERL light source proposed by KEK. It is expected to provide a reference to the future high energy ERL projects by this work.

physics.acc-ph