arXiv subjects

Seok-Kyun Son

Publications and source records attributed to Seok-Kyun Son.

9 recordsLinked to original sources

arXiv2026

Strain-Induced Detuning of a Dressed Nitrogen-Vacancy Qubit: Effective Two-Level Theory and Its Validity

The nitrogen-vacancy (NV) center in diamond can be operated as a microwave-dressed qubit. In the ideal two-level limit, its transition frequency is first-order insensitive to static magnetic fields, providing robustness against magnetic detuning noise. In practical diamond devices, however, residual transverse crystal strain mixes the $\ket{m_{s}=\pm1}$ spin sublevels and modifies the dressed qubit. In this study, we derive an analytical effective two-level model of a strained dressed NV qubit by perturbatively eliminating the far-detuned spectator state from the full three-level dressed Hamiltonian. We obtain closed-form expressions for the dressed-state splitting, the spin-locking mixing angle, and the longitudinal magnetic-field coupling. We show that transverse strain shifts the dressed-state resonance and tilts the spin-locking axis. These two effects restore a finite DC-field response and thereby quantify the loss of magnetic robustness. We demonstrate these features in simulated pulsed electron spin resonance spectra that incorporate rate-equation-based optical readout. We further derive exact validity criteria from the eigenvalues and spectator weights of the full three-level Hamiltonian. For practical use, we reduce these criteria to two controlled guidelines: the spectator-like branch must remain above the nominal upper dressed state, and its branch-specific admixture must remain small. A validity diagram over the axial-field--transverse-strain plane summarizes these approximate conditions and provides practical guidelines for designing dressed-NV sensing experiments.

quant-ph↗

arXiv2024

Engineering two-dimensional nodal semimetals in functionalized biphenylene by fluorine adatoms

We propose a new band engineering scheme on the biphenylene network, a newly synthesized carbon allotrope. First, we investigate the mechanism for the appearance of type II Dirac fermion in a pristine biphenylene network. We show that the essential ingredients are mirror symmetries and the stabilization of the compact localized eigenstates via destructive interference. While the former is used for the band-crossing point along high symmetry lines, the latter makes the obtained Dirac dispersion highly inclined. Then, we demonstrate that many other different kinds of Dirac fermions, such as type-I Dirac, gapped type-II Dirac, and nodal line semimetals, can be developed by fluorinating the biphenylene network periodically in various ways. In this program, the key role of the fluorine atoms is manipulating the condition of the destructive interference and mirror symmetries.

cond-mat.str-el↗

arXiv2019

Electronic phase separation in topological surface states of rhombohedral graphite

Of the two stable forms of graphite, hexagonal (HG) and rhombohedral (RG), the former is more common and has been studied extensively. RG is less stable, which so far precluded its detailed investigation, despite many theoretical predictions about the abundance of exotic interaction-induced physics. Advances in van der Waals heterostructure technology have now allowed us to make high-quality RG films up to 50 graphene layers thick and study their transport properties. We find that the bulk electronic states in such RG are gapped and, at low temperatures, electron transport is dominated by surface states. Because of topological protection, the surface states are robust and of high quality, allowing the observation of the quantum Hall effect, where RG exhibits phase transitions between gapless semimetallic phase and gapped quantum spin Hall phase with giant Berry curvature. An energy gap can also be opened in the surface states by breaking their inversion symmetry via applying a perpendicular electric field. Moreover, in RG films thinner than 4 nm, a gap is present even without an external electric field. This spontaneous gap opening shows pronounced hysteresis and other signatures characteristic of electronic phase separation, which we attribute to emergence of strongly-correlated electronic surface states.

cond-mat.mes-hall↗

arXiv2019

Quantised Charge Transport driven by a Surface Acoustic Wave in induced unipolar and bipolar junctions

Surface acoustic waves (SAWs) have been used to transport single electrons across long distances of several hundreds of microns. They can potentially be instrumental in the implementation of scalable quantum processors and quantum repeaters, by facilitating interaction between distant qubits. While most of the work thus far has focused on SAW devices in doped GaAs/AlGaAs heterostructures, we have developed a method of creating lateral p-n junctions in an undoped heterostructure containing a quantum well, with the expected advantages of having reduced charge noise and increased spin-coherence lifetimes due to the lack of dopant scattering centres. We present experimental observations of SAW-driven single-electron quantised current in an undoped GaAs/AlGaAs heterostructure, where single electrons were transported between regions of induced electrons. We also demonstrate pumping of electrons by a SAW across the sub-micron depleted channel between regions of electrons and holes, and observe light emission at such a lateral p-n junction. Improving the lateral confinement in the junction should make it possible to produce a quantised electron-to-hole current and hence SAW-driven emission of single photons.

cond-mat.mes-hall↗

arXiv2019

Stacking transition in rhombohedral graphite

Few layer graphene (FLG) has been recently intensively investigated for its variable electronic properties defined by a local atomic arrangement. While the most natural layers arrangement in FLG is ABA (Bernal) stacking, a metastable ABC (rhombohedral) stacking characterized by a relatively high energy barrier can also occur. When both stacking occur in the same FLG device this results in in-plane heterostructure with a domain wall (DW). We show that ABC stacking in FLG can be controllably and locally turned into ABA stacking by two following approaches. In the first approach, Joule heating was introduced and the transition was characterized by 2D-peak Raman spectra at a submicron spatial resolution. The observed transition was initiated at a small region and then the DW controllably shifted until the entire device became ABA stacked. In the second approach, the transition was achieved by illuminating the ABC region with a train of laser pulses of 790 nm wavelength, while the transition was visualized by transmission electron microscopy in both diffraction and dark field modes. Also, with this approach, a DW was visualized in the dark-field imaging mode, at a nanoscale spatial resolution.

cond-mat.mes-hall↗

arXiv2019

Single-photon Emission from an Acoustically-driven Lateral Light-emitting Diode

Single-photon sources are essential building blocks in quantum photonic networks, where quantum-mechanical properties of photons are utilised to achieve quantum technologies such as quantum cryptography and quantum computing. Most conventional solid-state single-photon sources are based on single emitters such as self-assembled quantum dots, which are created at random locations and require spectral filtering. These issues hinder the integration of a single-photon source into a scaleable photonic quantum network for applications such as on-chip photonic quantum processors. In this work, using only regular lithography techniques on a conventional GaAs quantum well, we realise an electrically triggered single-photon source with a GHz repetition rate and without the need for spectral filtering. In this device, a single electron is carried in the potential minimum of a surface acoustic wave (SAW) and is transported to a region of holes to form an exciton. The exciton then decays and creates a single photon in a lifetime of ~ 100ps. This SAW-driven electroluminescence (EL) yields photon antibunching with $g^{(2)}(0) = 0.39 \pm 0.05$, which satisfies the common criterion for a single-photon source $g^{(2)}(0) < 0.5$. Furthermore, we estimate that if a photon detector receives a SAW-driven EL signal within one SAW period, this signal has a 79%-90% chance of being a single photon. This work shows that a single-photon source can be made by combining single-electron transport and a lateral n-i-p junction. This approach makes it possible to create multiple synchronised single-photon sources at chosen positions with photon energy determined by quantum-well thickness. Compared with conventional quantum-dot-based single-photon sources, this device may be more suitable for an on-chip integrated photonic quantum network.

cond-mat.mes-hall↗

arXiv2018

Dimensional reduction, quantum Hall effect and layer parity in graphite films

The quantum Hall effect (QHE) originates from discrete Landau levels forming in a two-dimensional (2D) electron system in a magnetic field. In three dimensions (3D), the QHE is forbidden because the third dimension spreads Landau levels into multiple overlapping bands, destroying the quantisation. Here we report the QHE in graphite crystals that are up to hundreds of atomic layers thick - thickness at which graphite was believed to behave as a 3D bulk semimetal. We attribute the observation to a dimensional reduction of electron dynamics in high magnetic fields, such that the electron spectrum remains continuous only in the direction of the magnetic field, and only the last two quasi-one-dimensional (1D) Landau bands cross the Fermi level. In sufficiently thin graphite films, the formation of standing waves breaks these 1D bands into a discrete spectrum, giving rise to a multitude of quantum Hall plateaux. Despite a large number of layers, we observe a profound difference between films with even and odd numbers of graphene layers. For odd numbers, the absence of inversion symmetry causes valley polarisation of the standing-wave states within 1D Landau bands. This reduces QHE gaps, as compared to films of similar thicknesses but with even layer numbers because the latter retain the inversion symmetry characteristic of bilayer graphene. High-quality graphite films present a novel QHE system with a parity-controlled valley polarisation and intricate interplay between orbital, spin and valley states, and clear signatures of electron-electron interactions including the fractional QHE below 0.5 K.

cond-mat.mes-hall↗

arXiv2017

Graphene hot-electron light bulb: incandescence from hBN-encapsulated graphene in air

The excellent electronic and mechanical properties of graphene allow it to sustain very large currents, enabling its incandescence through Joule heating in suspended devices. Although interesting scientifically and promising technologically, this process is unattainable in ambient environment, because graphene quickly oxidises at high temperatures. Here, we take the performance of graphene-based incandescent devices to the next level by encapsulating graphene with hexagonal boron nitride (hBN). Remarkably, we found that the hBN encapsulation provides an excellent protection for hot graphene filaments even at temperatures well above 2000 K. Unrivalled oxidation resistance of hBN combined with atomically clean graphene/hBN interface allows for a stable light emission from our devices in atmosphere for many hours of continuous operation. Furthermore, when confined in a simple photonic cavity, the thermal emission spectrum is modified by a cavity mode, shifting the emission to the visible range spectrum. We believe our results demonstrate that hBN/graphene heterostructures can be used to conveniently explore the technologically important high-temperature regime and to pave the way for future optoelectronic applications of graphene-based systems.

cond-mat.mes-hall↗

arXiv2016

Stacking transition in bilayer graphene caused by thermally activated rotation

Crystallographic alignment between two-dimensional crystals in van der Waals heterostructures brought a number of profound physical phenomena, including observation of Hofstadter butterfly and topological currents, and promising novel applications, such as resonant tunnelling transistors. Here, by probing the electronic density of states in graphene using graphene-hexagonal boron nitride tunnelling transistors, we demonstrate a structural transition of bilayer graphene from incommensurate twisted stacking state into a commensurate AB stacking due to a macroscopic graphene self-rotation. This structural transition is accompanied by a topological transition in the reciprocal space and by pseudospin texturing. The stacking transition is driven by van der Waals interaction energy of the two graphene layers and is thermally activated by unpinning the microscopic chemical adsorbents which are then removed by the self-cleaning of graphene.

cond-mat.mes-hall↗