arXiv subjects

Sergei S. Avedisov

Publications and source records attributed to Sergei S. Avedisov.

8 recordsLinked to original sources

arXiv2026

Fusion or Confusion? Potential and Challenges in Fusion of Onboard Sensors and V2X Data in Cooperative Perception

Connected Automated Vehicles (CAVs) utilize their onboard sensors to perceive the environment. The perception range and accuracy can be affected by adverse weather or non-line-of-sight conditions. Cooperative perception or sensor sharing can overcome these limitations by enabling CAVs to exchange sensor data, thus collectively enhancing their perception capabilities. Previous studies have shown the potential of cooperative perception, but limited attention has been given to the fusion of V2X data received through cooperative perception messages with onboard sensor information. The fusion process can be influenced by the quantity and quality of the V2X data. An increased volume of V2X data can reduce uncertainty in the perceived environment; however, when the data is noisy, it may compromise the accuracy of the fusion results. This study investigates the fusion of onboard sensor and V2X data in cooperative perception, and demonstrates that while perception can significantly improve as the V2X penetration rate increases, it can introduce a significant number of false positives if V2X data is not highly accurate. False positives result in the detection of ghost objects that do not actually exist. These ghost objects can, in turn, compromise safety and driving efficiency. Our analysis found that false positives or ghost objects can appear even with accurate V2X data. These findings highlight the challenges in cooperative perception and the importance of developing robust data fusion methods to enhance the reliability of cooperative perception. This is particularly relevant in light of ongoing standardization efforts, such as ETSI TS 103 324 on collective perception.

cs.NI↗

arXiv2026

Support of Teleoperated Driving with 5G Networks

Teleoperated driving (ToD) can support autonomous driving under complex or unexpected traffic scenarios that an autonomous vehicle may not understand or be able to handle. In ToD, autonomous vehicles transmit video feeds and perception data to the remote control center. The operator uses this data to understand the driving environment and remotely control the vehicle that can take over the control once the scenario is resolved. ToD requires reliable and low latency communications between the vehicle and the ToD control center. This study analyzes the feasibility to support ToD with 5G networks. The study demonstrates that the feasibility strongly depends on the bandwidth and the Time Division Duplexing (TDD) frame structure that conditions how the bandwidth is distributed between uplink and downlink transmissions. The study also shows that scaling the number of 5G-supported ToD vehicles requires the vehicles to reduce the video bitrates. The study also shows that traditional centralized 5G network deployments may be challenged by some of the most stringent ToD latency requirements due to the latency introduced by the Internet connection to the ToD control center.

cs.NI↗

arXiv2026

FORESEE: A Cooperative Lane Change Model for Connected and Automated Driving

This paper presents FORESEE, a novel cooperative lane change model for connected and automated driving. FORESEE leverages Vehicle-to-Everything (V2X) data to anticipate traffic conditions and effectively organize lane changes. Specifically, it uses V2X data to organize vehicles into lanes based on their desired speeds, which helps to homogenize traffic flow and reduce disturbances caused by speed differences among vehicles within the same lane. The study demonstrates that implementing cooperative lane changes with FORESEE enhances average vehicle speed and energy efficiency compared to non-cooperative lane changes, which typically rely on short-term and local information about the ego vehicle and its immediate neighbors. This is achieved through fewer but more effective lane changes. Additionally, vehicles can maintain speeds closer to their desired speeds, resulting in fewer fluctuations in speed and acceleration and enhanced driving comfort. Moreover, cooperative lane changes can better manage road traffic disturbances, such as obstacles, by anticipating traffic conditions and organizing lane changes ahead. FORESEE serves as a valuable framework for the future design and testing of V2X-based maneuver coordinations as their effectiveness depends on how vehicles change lanes and their ability to plan and organize maneuvers in consideration of the upcoming traffic conditions.

cs.NI↗

arXiv2026

Importance of Intent-Sharing for V2X-based Maneuver Coordination

This paper examines the critical role of intent-sharing in enabling effective maneuver coordination for connected and automated vehicles (CAVs). Successful maneuver coordinations require vehicles to accurately know other vehicles' driving intentions. Intent-sharing can be achieved by the remote vehicles directly communicating their plans with the ego vehicle, as opposed to the ego vehicle predicting the trajectory on the remote vehicles' behalf. In this paper, we investigate the potential of intent-sharing on maneuver coordination effectiveness by quantifying the percentage of successful coordinations. We analyze the potential of intent-sharing by comparing its effectiveness for coordinated lane changes in a highway scenario with the effectiveness of a trajectory prediction method based on current kinematic data. Our analysis demonstrates in two scenarios substantial improvements in maneuver coordination when CAVs have direct access to the nearby vehicles' driving intentions through intent sharing. These findings highlight the importance of including intent-sharing in the maneuver coordination protocol.

cs.NI↗

arXiv2026

When Cooperation Should End: Maneuver Coordination Cancellation for Connected Automated Driving

Maneuver coordination is essential for cooperative connected automated driving, enabling vehicles to negotiate maneuvers and interactions through V2X communication. While prior work has largely focused on how to initiate and execute coordinations, considerably less attention has been given to how ongoing coordinations should be terminated when they become unsuitable. This paper introduces the first complete design and implementation of maneuver coordination cancellation, including a state machine, message set, and decision-making logic. Our evaluation shows that cancellation significantly reduces the time vehicles spend in coordinations that cannot succeed, allowing them to become available for new maneuvers sooner. This increases the number of triggered coordinations and improves the number of successful maneuver coordinations. Overall, the study demonstrates that maneuver coordination cancellation improves cooperative driving, and establishes a foundation for further refinements that can enhance the efficiency and robustness of connected automated driving.

cs.NI↗

arXiv2026

Multi-Target Maneuver Coordinations: Unlocking Coordination Opportunities in Connected Automated Driving

Maneuver coordination is a key enabler of connected and automated driving, allowing vehicles to negotiate and execute maneuvers that would otherwise be difficult, inefficient or unsafe. Existing approaches and use cases typically assume coordination with a single predefined target vehicle, which limits the number of coordination opportunities. This paper introduces a maneuver coordination approach based on multi-target selection, which allows a vehicle to identify and select among multiple potential coordination vehicles for a given maneuver. Multi-target maneuver coordination does not require modifications to the maneuver execution logic or to the underlying coordination protocol. Instead, it extends the decision-making process preceding coordination, enabling vehicles to exploit a broader set of feasible cooperative interactions. Results show that multi-target maneuver coordination significantly increases triggered and successfully executed coordinations while maintaining a low computational cost, as the proposed approach achieves these gains without requiring the analysis of a large number of potential target vehicles. These improvements preserve coordination success rates while enabling earlier maneuver initiation.

cs.NI↗

arXiv2026

Formation and Investigation of Cooperative Platooning at the Early Stage of Connected and Automated Vehicles Deployment

Cooperative platooning, enabled by cooperative adaptive cruise control (CACC), is a cornerstone technology for connected automated vehicles (CAVs), offering significant improvements in safety, comfort, and traffic efficiency over traditional adaptive cruise control (ACC). This paper addresses a key challenge in the initial deployment phase of CAVs: the limited benefits of cooperative platooning due to the sparse distribution of CAVs on the road. To overcome this limitation, we propose an innovative control framework that enhances cooperative platooning in mixed traffic environments. Two techniques are utilized: (1) a mixed cooperative platooning strategy that integrates CACC with unconnected vehicles (CACCu), and (2) a strategic lane-change decision model designed to facilitate safe and efficient lane changes for platoon formation. Additionally, a surrounding vehicle identification system is embedded in the framework to enable CAVs to effectively identify and select potential platooning leaders. Simulation studies across various CV market penetration rates (MPRs) show that incorporating CACCu systems significantly improves safety, comfort, and traffic efficiency compared to existing systems with only CACC and ACC systems, even at CV penetration as low as 10%. The maximized platoon formation increases by up to 24%, accompanied by an 11% reduction in acceleration and a 7% decrease in fuel consumption. Furthermore, the strategic lane-change model enhances CAV performance, achieving notable improvements between 6% and 60% CV penetration, without adversely affecting overall traffic flow.

eess.SY↗

arXiv2024

HEAD: A Bandwidth-Efficient Cooperative Perception Approach for Heterogeneous Connected and Autonomous Vehicles

In cooperative perception studies, there is often a trade-off between communication bandwidth and perception performance. While current feature fusion solutions are known for their excellent object detection performance, transmitting the entire sets of intermediate feature maps requires substantial bandwidth. Furthermore, these fusion approaches are typically limited to vehicles that use identical detection models. Our goal is to develop a solution that supports cooperative perception across vehicles equipped with different modalities of sensors. This method aims to deliver improved perception performance compared to late fusion techniques, while achieving precision similar to the state-of-art intermediate fusion, but requires an order of magnitude less bandwidth. We propose HEAD, a method that fuses features from the classification and regression heads in 3D object detection networks. Our method is compatible with heterogeneous detection networks such as LiDAR PointPillars, SECOND, VoxelNet, and camera Bird's-eye View (BEV) Encoder. Given the naturally smaller feature size in the detection heads, we design a self-attention mechanism to fuse the classification head and a complementary feature fusion layer to fuse the regression head. Our experiments, comprehensively evaluated on the V2V4Real and OPV2V datasets, demonstrate that HEAD is a fusion method that effectively balances communication bandwidth and perception performance.

cs.CV↗