arXiv subjects

Sergei Tretyakov

Publications and source records attributed to Sergei Tretyakov.

At least 19 recordsLinked to original sources

arXiv2026

Huygens' principle and field equivalence relations for cylindrical enclosing surfaces

Frequency-domain Huygens' principle and equivalence relations for an infinitely long cylindrical surface enclosing the field sources or scatterers are addressed. Assuming the harmonic dependence of the fields along the cylinder axis, we derive three equivalent versions of line-integral representations for the fields in free space at any point outside the enclosing cylinder. In one of the forms, similarly to the Helmholtz-Kirchhoff scalar diffraction theory, the integrals contain a longitudinal field component and its normal derivative. Another presented form contains longitudinal and normal field components, similarly to the three-dimensional boundary integral representations by Stratton and Chu. This form eliminates the need to calculate the field derivatives. Furthermore, we present a two-dimensional version of the three-dimensional Schelkunoff-Franz representation, which contains only tangential components of the fields, complies with the field equivalence theorem and can be regarded as a rigorous formulation of Huygens' principle for a cylindrical enclosing surface. All three forms of the line-equivalence relation are exact and describe the fields through equivalent field distributions on a line enclosing the cross section of the source region. A physical interpretation of Huygens' principle in terms of conical waves emanated by virtual linear sources on the cylindrical surface enclosing the true sources is given. Specialization of the relations to the intermediate and far-field zones are presented. The derived expressions are applicable for studies of scattering and radiation in a very general class of structures that are infinite and periodic along one direction.

physics.class-ph↗

arXiv2026

Wearable metasurfaces for boosting the effective area of mobile-device antennas

Wireless communications increasingly face scenarios with compact user equipments operating in propagation environments where signal blockage, absorption, and device size limitations strongly constrain link performance. Most approaches to wireless-link enhancement focus either on improving base-station antenna systems, for example, through massive MIMO architectures; on engineering the propagation environment using reconfigurable intelligent surfaces and active relays. Here, we propose an alternative user-side strategy for improving wireless links based on wearable metasurfaces that enhance the effective antenna area of compact wireless devices. The proposed passive metasurface is integrated into clothing and engineered to collect the power of electromagnetic waves incident on user's body and route the collected power toward a mobile device in the form of surface waves. This mechanism significantly increases the effective receiving and transmitting area of the device antenna and its gain without external power sources, active control electronics, or additional stand-alone hardware. We implement the concept on a hoodie textile using a scalable screen-printing process with conductive silver ink and demonstrate an approximately tenfold enhancement of the received signal at 26 GHz. This passive approach effectively brings the human body into the communication network by turning clothing into a virtual thin and flexible lens for focusing the incident power on the user equipment.

physics.optics↗

arXiv2026

Towards compact high-frequency nonreciprocal devices using nanoplasma-switched time-varying metasurfaces

Time-modulated systems have received growing interest in recent years. They allow us to tailor effects, such as frequency conversion, single-direction propagation, etc. For the microwave band, semiconductor elements, such as varactors, are usually used as time-modulated elements but their modulation frequency has been limited to the few-gigahertz range. Recent advances in nanoplasma switches, i.e., two-state electronic switches based on a gas discharge in a nanometer-scale gap, provide a new potential for developing time-modulated systems with high operating frequencies. Here, we develop an analytical framework based on the time-Floquet method for the design of nonreciprocal time-modulated devices based on two-state time-modulated elements, for instance, nanoplasma-based switches. A practical example of a microwave isolator operating at 100~GHz frequency is developed and studied both analytically and using full-wave simulations. A potential realization in a parallel-plate waveguide is also simulated numerically.

physics.optics↗

arXiv2025

Stacked Time-Varying Metasurfaces

Spatiotemporal metasurfaces offer unique opportunities for wave manipulation, however, their practical realization is often constrained by the requirement for in-plane spatial modulation, which necessitates a large number of time-varying elements. In this work, we introduce an alternative architecture based on a cascade of spatially uniform metasurfaces subjected to periodic temporal modulation. Although all metasurfaces share the same modulation frequency, their individual modulation functions are independently engineered to achieve a desired complex electromagnetic response. We develop a general theoretical framework for the design and optimization of such stacked metasurface systems, composed of dense arrays of cylindrical meta-atoms with time-varying plasma and/or collision frequencies. The effectiveness of the approach is demonstrated through the optimization of metasurface designs that enable magnet-free isolation at the fundamental frequency and a temporal analogue of circulators. Furthermore, we show that a metasurface stack can be implemented using only a few time-modulated elements embedded within a parallel-plate waveguide, opening new avenues for extremely compact, versatile, and scalable spatiotemporal platforms for next-generation photonic and microwave systems.

physics.optics↗

arXiv2025

Roadmap on Nonlocality in Photonic Materials and Metamaterials

Photonic technologies continue to drive the quest for new optical materials with unprecedented responses. A major frontier in this field is the exploration of nonlocal (spatially dispersive) materials, going beyond the local, wavevector-independent assumption traditionally made in optical material modeling. On one end, the growing interest in plasmonic, polaritonic and quantum materials has revealed naturally occurring nonlocalities, emphasizing the need for more accurate models to predict and design their optical responses. This has major implications also for topological, nonreciprocal, and time-varying systems based on these material platforms. Beyond natural materials, artificially structured materials--metamaterials and metasurfaces--can provide even stronger and engineered nonlocal effects, emerging from long-range interactions or multipolar effects. This is a rapidly expanding area in the field of photonic metamaterials, with open frontiers yet to be explored. In the case of metasurfaces, in particular, nonlocality engineering has become a powerful tool for designing strongly wavevector-dependent responses, enabling enhanced wavefront control, spatial compression, multifunctional devices, and wave-based computing. Furthermore, nonlocality and related concepts play a critical role in defining the ultimate limits of what is possible in optics, photonics, and wave physics. This Roadmap aims to survey the most exciting developments in nonlocal photonic materials, highlight new opportunities and open challenges, and chart new pathways that will drive this emerging field forward--toward new scientific discoveries and technological advancements.

cond-mat.mes-hall↗

arXiv2024

Time Interfaces in Nanoplasma-Switched Wire Media

In this work, we consider instantaneous transitions of an infinitely extended uniaxial dielectric into a wire medium (WM) of continuous infinitely long conducting wires. Due to the strong spatial dispersion in the WM the known (Morgenthaler's) theory of temporal discontinuities is not applicable. We solve this problem analytically in time domain. We show that a transverse electromagnetic (TM) plane wave transforms into four waves: a pair of TM waves and a pair of transverse electromagnetic waves. This way, the power flow splits into two different directions, with one of them along the wires. Such a transition can possibly be achieved by nanoplasma discharges in the gaps of the split wires, initiated by an external voltage source applied to the wire and transforming the split wires forming the uniaxial dielectric into continuous ones.

physics.optics↗

arXiv2024

Electromagnetic Time Interfaces in Wire Media: Innovations for Subwavelength Imaging

In this work, we theoretically study temporal interfaces between media with strong spatial dispersion and dielectrics. In particular, we consider a temporal discontinuity that transforms a wire medium sample, a metamaterial with resonant spatial dispersion, into a uniaxial dielectric. We show that this transition results in a transformation of the deeply subwavelength spatial spectrum of TEM waves propagating in the wire medium at a certain frequency into a spectrum of plane waves at new frequencies that are all higher than the initial one. The waves at different frequencies propagate in different directions. Their complex amplitudes and propagation directions are uniquely related to the amplitudes of the spatial harmonics of the fields which existed before the transition. We explain how to implement this transition. The revealed effect may result in a promising method of subwavelength imaging.

physics.optics↗

arXiv2024

Simultaneous High-Efficiency Anomalous Reflection and Angle of Arrival Sensing in Reconfigurable Intelligent Surfaces

In this work, we introduce reconfigurable intelligent surfaces designed to simultaneously perform reflection of single or multiple incident waves toward the receiver or receivers and sensing the angles of arrival. We achieve anomalous reflection with strongly suppressed parasitic scattering through an in-situ optimization of either the currents flowing on array elements or the far field in the receiver direction. The suppression of parasitic scattering allows us to accurately and without additional measurements or computations detect the angles of arrival of the illuminations through the spatial Fourier transform of the optimized current distribution through the controllable reactive loads. Therefore, unlike other recently proposed methods, our scheme of integrated sensing and communication does not require any pre-computed data sets and works for an arbitrary number of simultaneous illuminations. As a proof of principle, we design and analyze with full-wave simulations several reconfigurable intelligent surfaces consisting of an array of loaded wires above a ground plane.

physics.app-ph↗

arXiv2023

Engineering of intelligent reflecting surfaces: Reflection locality and angular stability

Reconfigurable intelligent surfaces (RISs) are electromagnetically passive controllable structures, deflecting the incident wave beam in directions predefined by the control signal. A usual way to design RIS based on metasurfaces (MSs) is based on the application of the approximation in which the reflective properties of a uniform MS are attributed to a unit cell of the non-uniform one. We call this approximation the reflection locality. In the present paper, we show that this approximation may result in heavy errors. We also find a condition under which this approximation is applicable for a wide range of incidence and deflection angles. This condition is the angular stability of the reflection phase of a uniform MS based on which the non-uniform one is generated. We present an approximate analytical proof of the equivalence of the reflection locality and angular stability. As an example, we report theoretical and experimental results we obtained for a binary RIS whose generic uniform analogue has the angular stability. Meanwhile, for its counterpart without angular stability (the so-called mushroom MS) the same model fails.

physics.optics↗

arXiv2023

Comparison Between Different Designs and Realizations of Anomalous Reflectors

Metasurfaces enable efficient manipulation of electromagnetic radiation. In particular, control over plane-wave reflection is one of the most useful features in many applications. Extensive research has been done in the field of anomalous reflectors over the past years, resulting in numerous introduced geometries and several distinct design approaches. Anomalously reflecting metasurfaces designed using different methods show different performances in terms of reflection efficiency, angular response, frequency bandwidth, etc. Without a comprehensive comparison between known design approaches, it is difficult to properly select the most appropriate design method and the most suitable metasurface geometry. Here, we consider four main approaches that can be used to design anomalous reflectors within the same basic topology of the structure and study the designed metasurfaces first on the level of the input impedance and then consider and compare the performance of the realized structures. We cover a wide range of performance aspects, such as the power efficiency and losses, angular response, and the scattering pattern of finite-size structures. We anticipate that this study will prove useful for developing new engineering methods and designing more sophisticated structures that include reconfigurable elements. Furthermore, we believe that this study can be considered referential since it provides comparative physical insight into anomalous reflectors in general.

physics.app-ph↗

arXiv2022

Communication Models for Reconfigurable Intelligent Surfaces: From Surface Electromagnetics to Wireless Networks Optimization

A reconfigurable intelligent surface (RIS) is a planar structure that is engineered to dynamically control the electromagnetic waves. In wireless communications, RISs have recently emerged as a promising technology for realizing programmable and reconfigurable wireless propagation environments through nearly passive signal transformations. With the aid of RISs, a wireless environment becomes part of the network design parameters that are subject to optimization. In this tutorial paper, we focus our attention on communication models for RISs. First, we review the communication models that are most often employed in wireless communications and networks for analyzing and optimizing RISs, and elaborate on their advantages and limitations. Then, we concentrate on models for RISs that are based on inhomogeneous sheets of surface impedance, and offer a step-by-step tutorial on formulating electromagnetically-consistent analytical models for optimizing the surface impedance. The differences between local and global designs are discussed and analytically formulated in terms of surface power efficiency and reradiated power flux through the Poynting vector. Finally, with the aid of numerical results, we discuss how approximate global designs can be realized by using locally passive RISs with zero electrical resistance (i.e., inhomogeneous reactance boundaries with no local power amplification), even for large angles of reflection and at high power efficiency.

cs.IT↗

arXiv2021

Smart Radio Environments

This Roadmap takes the reader on a journey through the research in electromagnetic wave propagation control via reconfigurable intelligent surfaces. Meta-surface modelling and design methods are reviewed along with physical realisation techniques. Several wireless applications are discussed, including beam-forming, focusing, imaging, localisation, and sensing, some rooted in novel architectures for future mobile communications networks towards 6G.

physics.class-ph↗

arXiv2021

Subwavelength Focusing by Engineered Power Flow-Conformal Metamirrors

Many advances in reflective metasurfaces have been made during the last few years, implementing efficient manipulations of wavefronts, especially for plane waves. Despite numerous solutions that have been developed throughout the years, a practical method to obtain subwavelength focusing without the generation of additional undesired scattering is a challenge to this day. In this paper, we introduce and discuss lossless reflectors for focusing incident waves into a point. The solution is based on the so-called power flow-conformal surfaces that allow theoretically arbitrary shaping of reflected waves. The metamirror shape is adapted to the power flow of the sum of the incident and reflected waves, allowing a local description of the reflector surface based on the surface impedance. In particular, we present a study of two scenarios. First, we study the scenario when the field is emitted by a point source and focused at an image point (in the considered example, with the λ/20 resolution). Second, we analyze a metasurface capable to focus the power of an illuminating plane wave. This work provides a feasible strategy for various applications, including detecting biological signals near the skin, sensitive power focusing for cancer therapy, and point-to-point power transfer.

physics.optics↗

arXiv2021

Up-And-Coming Physical Concepts of Wireless Power Transfer

The rapid development of chargeable devices has caused a great deal of interest in efficient and stable wireless power transfer (WPT) solutions. Most conventional WPT technologies exploit outdated electromagnetic field control methods proposed in the 20th century, wherein some essential parameters are sacrificed in favour of the other ones (efficiency vs. stability), making available WPT systems far from the optimal ones. Over the last few years, the development of novel approaches to electromagnetic field manipulation has enabled many up-and-coming technologies holding great promises for advanced WPT. Examples include coherent perfect absorption, exceptional points in non-Hermitian systems, non-radiating states and anapoles, advanced artificial materials and metastructures. This work overviews the recent achievements in novel physical effects and materials for advanced WPT. We provide a consistent analysis of existing technologies, their pros and cons, and attempt to envision possible perspectives.

physics.app-ph↗

arXiv2020

On the Path-Loss of Reconfigurable Intelligent Surfaces: An Approach Based on Green's Theorem Applied to Vector Fields

In this paper, we introduce a physics-based analytical characterization of the free-space path-loss of a wireless link in the presence of a reconfigurable intelligent surface. The proposed approach is based on the vector generalization of Green's theorem. The obtained path-loss model can be applied to two-dimensional homogenized metasurfaces, which are made of sub-wavelength scattering elements and that operate either in reflection or transmission mode. The path-loss is formulated in terms of a computable integral that depends on the transmission distances, the polarization of the radio waves, the size of the surface, and the desired surface transformation. Closed-form expressions are obtained in two asymptotic regimes that are representative of far-field and near-field deployments. Based on the proposed approach, the impact of several design parameters and operating regimes is unveiled.

cs.IT↗

arXiv2020

Perfect conversion of a TM surface-wave into a TM leaky-wave by an isotropic periodic metasurface printed on a grounded dielectric slab

This paper presents an exact solution for a perfect conversion of a TM-polarized surface wave (SW) into a TM-polarized leaky-wave (LW) using a reciprocal and lossless penetrable metasurface (MTS) characterized by a scalar sheet impedance, located on a grounded slab. In contrast to known realizations of leaky-wave antennas, the optimal surface reactance modulation which is found here ensures the absence of evanescent higher-order modes of the field Floquet-wave expansion near the radiating surface. Thus, all the energy carried by the surface wave is used for launching the single inhomogeneous plane wave into space without accumulation of reactive energy in the higher-order modes. It is shown that the resulting penetrable MTS exhibits variation from an inductive to a capacitive reactance passing through a resonance. The present formulation complements a previous paper of the authors in which a perfect conversion from TM-polarized SW to TE-polarized LW was found for impenetrable boundary conditions. Here, the solution takes into account the grounded slab dispersion and it is convenient for practical implementation.

physics.class-ph↗

arXiv2020

Smart Radio Environments Empowered by Reconfigurable Intelligent Surfaces: How it Works, State of Research, and Road Ahead

What is a reconfigurable intelligent surface? What is a smart radio environment? What is a metasurface? How do metasurfaces work and how to model them? How to reconcile the mathematical theories of communication and electromagnetism? What are the most suitable uses and applications of reconfigurable intelligent surfaces in wireless networks? What are the most promising smart radio environments for wireless applications? What is the current state of research? What are the most important and challenging research issues to tackle? These are a few of the many questions that we investigate in this short opus, which has the threefold objective of introducing the emerging research field of smart radio environments empowered by reconfigurable intelligent surfaces, putting forth the need of reconciling and reuniting C. E. Shannon's mathematical theory of communication with G. Green's and J. C. Maxwell's mathematical theories of electromagnetism, and reporting pragmatic guidelines and recipes for employing appropriate physics-based models of metasurfaces in wireless communications.

cs.IT↗

arXiv2020

Multiphysics metamirrors for simultaneous manipulations of acoustic and electromagnetic waves

Metasurfaces have shown unprecedented possibilities for wavefront manipulation of waves. The research efforts have been focused on the development of metasurfaces that perform a specific functionality for waves of one physical nature, for example, for electromagnetic waves. In this work, we propose the use of power-flow conformal metamirrors for creation of multiphysics devices which can simultaneously control waves of different nature. In particular, we introduce metasurface devices which perform specified operations on both electromagnetic and acoustic waves at the same time. Using a purely analytical model based on surface impedances, we introduce metasurfaces that perform the same functionality for electromagnetic and acoustic waves and, even more challenging, different functionalities for electromagnetics and acoustics. We provide realistic topologies for practical implementations of proposed metasurfaces and confirm the results with numerical simulations.

physics.optics↗