arXiv subjects

Sergei Tretyakov

Publications and source records attributed to Sergei Tretyakov.

At least 55 records · Page 3Linked to original sources

arXiv2014

Metamirrors

We introduce the concept of non-uniform metamirrors (full-reflection metasurfaces) providing full control of reflected wave fronts independently from the two sides of the mirror. Metamirror is a single planar array of electrically small bianisotropic inclusions. The electric and magnetic responses of the inclusions enable creating controlled gradient of phase discontinuities over the surface. Furthermore, presence of electromagnetic coupling in the inclusions allows independent control of reflection phase from the opposite sides of the mirror. Based on the proposed concept, we design and simulate metamirrors for highly efficient light bending and near-diffraction-limit focusing with a sub-wavelength focal distance.

physics.optics↗

arXiv2014

Omega Transmission Lines with Applications to Effective Medium Models of Metamaterials

In this paper we introduce the concept of transmission lines with inherent bi-anisotropy and establish an analogy between these lines and volumetric bi-anisotropic materials. In particular, we find under what conditions a periodically loaded transmission line can be treated as an effective omega medium. Two example circuits are introduced and analyzed. The results have two-fold implications: opening a route to emulate electromagnetic properties of bi-anisotropic omega media using transmission-line meshes and understanding and improving effective medium models of composite materials with the use of effective circuit models of unit cells.

physics.class-ph↗

arXiv2014

Advanced Self-interference Cancellation and Multiantenna Techniques for Full-Duplex Radios

In an in-band full-duplex system, radios transmit and receive simultaneously in the same frequency band at the same time, providing a radical improvement in spectral efficiency over a half-duplex system. However, in order to design such a system, it is necessary to mitigate the self-interference due to simultaneous transmission and reception, which seriously limits the maximum transmit power of the full-duplex device. Especially, large differences in power levels in the receiver front-end sets stringent requirements for the linearity of the transceiver electronics. We present an advanced architecture for a compact full-duplex multiantenna transceiver combining antenna design with analog and digital cancellation, including both linear and nonlinear signal processing.

cs.OH↗

arXiv2013

Maximizing absorption and scattering by dipole particles

This is a review and tutorial paper which discusses the fundamental limitations on the maximal power which can be received, absorbed, and scattered by an electrically small electrically polarizable particle and infinite periodical arrays of such particles.

cond-mat.mtrl-sci↗

arXiv2013

One-way transparent sheets

In this paper we introduce the concept of metasurfaces which are fully transparent when looking from one of the two sides of the sheet and have controllable functionalities for waves hitting the opposite side (one-way transparent sheets). We address the question on what functionalities are allowed, considering limitations due to reciprocity and passivity. In particular, we have found that it is possible to realize one-way transparent sheets which have the properties of a twist-polarizer in reflection or transmission when illuminated from the other side. Also one-way transparent sheets with controllable co-polarized reflection and transmission from the opposite side are feasible. We show that particular non-reciprocal magneto-electric coupling inside the sheet is necessary to realize lossless non-active transparent sheets. Furthermore, we derive the required polarizabilities of constituent dipole particles such that the layers composed of them form one-way transparent sheets. We conclude with design and simulations of an example of a nonreciprocal one-way transparent sheet functioning as an isolating twist-polarizer.

physics.optics↗

arXiv2013

Omega Transmission Lines

In this paper, we show how bi-anisotropic media with omega-type response can be realized using periodically loaded transmission lines. General conditions for the needed unit cell circuit block are derived. Also, an implementation is shown and analyzed.

physics.class-ph↗

arXiv2013

Eliminating Electromagnetic Scattering from Small Particles

This paper presents and discusses the conditions for zero electromagnetic scattering by electrically small particles. We consider the most general bi-anisotropic particles, characterized by four dyadic polarizabilities and study the case of uniaxially symmetric objects. Conditions for zero backward and forward scattering are found for a general uniaxial bi-anisotropic particle and specialized for all fundamental classes of bi-anisotropic particles: omega, "moving", chiral, and Tellegen particles. Possibility for zero total scattering is also discussed for aforementioned cases. The scattering pattern and polarization of the scattered wave are also determined for each particle class. In particular, we analyze the interplay between different scattering mechanisms and show that in some cases it is possible to compensate scattering from a polarizable particle by appropriate magneto-electric coupling. Examples of particles providing zero backscattering and zero forward scattering are presented and studied numerically.

physics.class-ph↗

arXiv2011

Nonlinear transformation optics and engineering of the Kerr effect

The concept of transformation optics is extended to nonlinear electrodynamics. It is shown that transformation optics favors implicit constitutive relations in terms of energy densities D.E and B.H rather than E^2 and H^2. The Kerr nonlinearity is studied in detail and the transformation optics based engineering of self-interaction effects is discussed. As a specific example we introduce transformation optics applied on a self-focusing field configuration.

physics.optics↗

arXiv2011

Perfect lensing with phase conjugating surfaces: Towards practical realization

It is theoretically known that a pair of phase conjugating surfaces can function as a perfect lens, focusing propagating waves and enhancing evanescent waves. However, the known experimental approaches based on thin sheets of nonlinear materials cannot fully realize the required phase conjugation boundary condition. In this paper we show that the ideal phase conjugating surface is in principle physically realizable and investigate the necessary properties of nonlinear and nonreciprocal particles which can be used to build a perfect lens system. The physical principle of the lens operation is discussed in detail and directions of possible experimental realizations are outlined.

physics.optics↗

arXiv2011

An ultra-broadband electromagnetically indefinite medium formed by aligned carbon nanotubes

Anisotropic materials with different signs of components of the permittivity tensor are called indefinite materials. Known realizations of indefinite media suffer of high absorption losses. We show that periodic arrays of parallel carbon nanotubes (CNTs) can behave as a low-loss indefinite medium in the infrared range. We show that a finite-thickness slab of CNTs supports the propagation of backward waves with small attenuation in an ultra-broad frequency band. In prospective, CNT arrays can be used for subwavelength focusing and detection, enhancing the radiation efficiency of small sources.

physics.optics↗

arXiv2010

On effective electromagnetic parameters of artificial nanostructured magnetic materials

In this paper we discuss effective material parameter description of new nanostructures designed to perform as artificial magnetic materials for vis- ible light. Among these structures there are various split-ring resonators, dual-bar structures, fishnet layers and other geometries. Artificial magnetic response in these structures appears due to weak spatial dispersion effects, and it is important to study the conditions under which the magnetic re- sponse can be adequately measured with effective permeability tensor. On the examples of dual bars and split rings we show that this is possible only under some quite restrictive conditions. In the general case, more compli- cated constitutive relations with more effective material parameters need to be developed.

physics.optics↗

arXiv2010

Validity of effective material parameters for optical fishnet metamaterials

Although optical metamaterials that show artificial magnetism are mesoscopic systems, they are frequently described in terms of effective material parameters. But due to intrinsic nonlocal (or spatially dispersive) effects it may be anticipated that this approach is usually only a crude approximation and is physically meaningless. In order to study the limitations regarding the assignment of effective material parameters, we present a technique to retrieve the frequency-dependent elements of the effective permittivity and permeability tensors for arbitrary angles of incidence and apply the method exemplarily to the fishnet metamaterial. It turns out that for the fishnet metamaterial, genuine effective material parameters can only be introduced if quite stringent constraints are imposed on the wavelength/unit cell size ratio. Unfortunately they are only met far away from the resonances that induce a magnetic response required for many envisioned applications of such a fishnet metamaterial. Our work clearly indicates that the mesoscopic nature and the related spatial dispersion of contemporary optical metamaterials that show artificial magnetism prohibits the meaningful introduction of conventional effective material parameters.

physics.optics↗

arXiv2009

Cloaking a metal object from an electromagnetic pulse: A comparison between various cloaking techniques

Electromagnetic cloaks are devices that can be used to reduce the total scattering cross section of various objects. An ideal cloak removes all scattering from an object and thus makes this object "invisible" to the electromagnetic fields that impinge on the object. However, ideal cloaking appears to be possible only at a single frequency. To study cloaking from an electromagnetic pulse we consider propagation of a pulse inside a waveguide with a cloaked metal object inside. There are several ways to achieve cloaking and in this paper we study three such methods, namely, the coordinate-transformation cloak, the transmission-line cloak, and the metal-plate cloak. In the case of the two last cloaks, pulse propagation is studied using experimental data whereas the coordinate-transformation cloak is studied with numerical simulations. The results show that, at least in the studied cases where the cloaked object's diameter is smaller than the wavelength, the cloaks based on transmission-line meshes and metal plates have wider bandwidth than the coordinate-transformation cloak.

physics.optics↗

arXiv2009

Subwavelength resolution for horizontal and vertical polarization by coupled arrays of oblate nanoellipsoids

A structure comprising a coupled pair of two-dimensional arrays of oblate plasmonic nanoellipsoids in a dielectric host medium is proposed as a superlens in the optical domain for both horizontal and vertical polarizations. By means of simulations it is demonstrated that a structure formed by silver nanoellipsoids is capable of restoring subwavelength features of the object for both polarizations at distances larger than half-wavelength. The bandwidth of subwavelength resolution is in all cases very large (above 13%).

physics.optics↗

arXiv2008

Broadband cloaking with volumetric structures composed of two-dimensional transmission-line networks

The cloaking performance of two microwave cloaks, both based on the recently proposed transmission-line approach, are studied using commercial full-wave simulation software. The cloaks are shown to be able to reduce the total scattering cross sections of metallic objects of some restricted shapes and sizes. One of the studied cloaks is electrically small in diameter, and the other is electrically large, with the diameter equal to several wavelengths.

physics.optics↗

arXiv2008

Experimental verification of broadband cloaking using a volumetric cloak composed of periodically stacked cylindrical transmission-line networks

Cloaking using a volumetric structure composed of stacked two-dimensional transmission-line networks is verified with measurements. The measurements are done in a waveguide, in which an array of metallic cylinders is inserted causing a short-circuit in the waveguide. The metal cylinders are cloaked using a previously designed and simulated cloak that hides the cylinders and thus enables wave propagation inside the waveguide.

physics.optics↗

arXiv2008

Subwavelength microscope that uses frequency scanning for image reconstruction

A new principle of subwavelength imaging based on frequency scanning is considered. It is shown that it is possible to reconstruct the spatial profile of an external field exciting an array (or coupled arrays) of subwavelength-sized resonant particles with a frequency scan over the whole band of resonating array modes. During the scan it is enough to measure and store the values of the near field at one or at most two points. After the scan the distribution of the near field can be reconstructed with simple post-processing. The proposed near-field microscope has no moving parts.

physics.optics↗

arXiv2008

Generalized field-transforming metamaterials

In this paper we introduce a generalized concept of field-transforming metamaterials, which perform field transformations defined as linear relations between the original and transformed fields. These artificial media change the fields in a prescribed fashion in the volume occupied by the medium. We show what electromagnetic properties of transforming medium are required. The coefficients of these linear functions can be arbitrary scalar functions of position and frequency, which makes the approach quite general and opens a possibility to realize various unusual devices.

physics.optics↗