arXiv subjects

Sergey Antipov

Publications and source records attributed to Sergey Antipov.

13 recordsLinked to original sources

arXiv2025

Beam Intensity Limitations in Future Multi-Bend Achromat Light Sources

We show that emittance of fourth-generation 6 GeV machines such as PETRA IV is close to what is theoretically achievable due to beam intensity limitations from space charge and intra-beam scattering. Investigating these limitations, in particular their scaling with the bare lattice emittance and the beam energy, we argue that achieving further significant emittance reduction and increase in radiation brightness is only possible by increasing the beam energy. We outline the design and technological challenges on the way to such improvement.

physics.acc-ph↗

arXiv2023

Coupled bunch stability with variable filling patterns in PETRA IV

The PETRA IV upgrade project is aiming at building a 6 GeV diffraction-limited light source. The storage ring`s off-axis accumulation injection scheme will allow generating a wide range of filling patterns for the needs of photon science users. To reserve high beam quality and low transverse emittances it is imperative to ensure beam stability against collective effects. In this paper we investigate the impact of different filling patterns on the coupled-bunch stability in the ring using a semi-analytical Vlasov solver.

physics.acc-ph↗

arXiv2021

Polished diamond x-ray lenses

We present high quality bi-concave 2D focusing diamond x-ray lenses of apex-radius $R=100~μ$m produced via laser-ablation and improved via a mechanical polishing process. Both for polished and unpolished individual lenses and for stacks of 10 lenses, we show the remaining figure errors determined using x-ray speckle tracking and compare these results to those of commercial $R=50~μ$m beryllium lenses that have similar focusing strength and physical aperture. For two stacks of 10 diamond lenses (polished and unpolished) and a stack of 11 beryllium lenses, we present measured 2D beam profiles out of focus and wire scans to obtain the beam size in the focal plane. These results are complemented with small angle x-ray scattering (SAXS) measurements of a polished and an unpolished diamond lens. Again, we compare this to the SAXS of a beryllium lens. The polished x-ray lenses show similar figure errors to commercially available Be lenses. While the beam size in the focal plane is comparable with that of the Be lenses, the SAXS signal of the polished diamond lenses is considerably lower.

physics.optics↗

arXiv2020

Demonstration of Planar Ultrananocrystalline Diamond Field Emission Source Operating in SRF Injector at 2 Kelvin

Reported here is the first demonstration of electron beam generation in an SRF TESLA 1.3 GHz gun equipped with field emission cathode when operated at 2 Kelvin. The cathode is submicron film of nitrogen-incorporated ultrananocrystalline diamond [(N)UNCD] deposited atop a Nb RRR300 cathode plug. The output current was measured to increase exponentially as a function of the cavity gradient. Our results demonstrate a feasible path toward simplified fully cryogenic SRF injector technology. One important finding is that the electron emitter made of (N)UNCD, a material long been known as a highly efficient field emission material, demonstrated a record low turn-on gradient of 0.6 MV/m. A hypothesis explaining this behavior is proposed.

physics.acc-ph↗

arXiv2020

High-dynamic-range transmission-mode detection of synchrotron radiation using X-ray excited optical luminescence in diamond

We demonstrate enhancement of X-ray excited optical luminescence in a 100-micron-thick diamond plate by introduction of defect states via electron beam irradiation and subsequent high-temperature annealing. The resulting X-ray transmission-mode scintillator features a linear response to incident photon flux in the range of 7.6$\times$10$^8$ to 1.26$\times10^{12}$ photons/s/mm$^2$ for hard X-rays (15.9 keV) using exposure times from 0.01 to 5 s. These characteristics enable a real-time transmission-mode imaging of X-ray photon flux density without disruption of X-ray instrument operation.

physics.ins-det↗

arXiv2019

Femtosecond relativistic electron beam with reduced timing jitter from THz-driven beam compression

We propose and demonstrate a novel method to reduce the pulse width and timing jitter of a relativistic electron beam through THz-driven beam compression. In this method the longitudinal phase space of a relativistic electron beam is manipulated by a linearly polarized THz pulse in a dielectric tube such that the bunch tail has a higher velocity than the bunch head, which allows simultaneous reduction of both pulse width and timing jitter after passing through a drift. In this experiment, the beam is compressed by more than a factor of four from 130 fs to 28 fs with the arrival time jitter also reduced from 97 fs to 36 fs, opening up new opportunities in using pulsed electron beams for studies of ultrafast dynamics. This technique extends the well known rf buncher to the THz frequency and may have a strong impact in accelerator and ultrafast science facilities that require femtosecond electron beams with tight synchronization to external lasers.

physics.acc-ph↗

arXiv2019

Effect of Crab cavity HOMs on the coupled-bunch stability of HL-LHC

High frequency High Order Modes can significantly affect the coupled-bunch stability in a circular accelerator. With a large enough shunt impedance they may drive a coupled-bunch transverse instability. We have developed an analytical model and implemented it in the NHT Vlasov solver. The results show that the instability is characterized by the excitation of many azimuthal intra-bunch modes, which have similar growth rates, that make the traditional remedies such as a flat resistive feedback and chromaticity inefficient in suppressing it. For the High Luminosity Large Hadron Collider this could result in a significant increase of the stabilizing Landau octupole current, up to $\sim 100$ A ($\sim 20\%$ of the maximum available current). In order to limit the increase below 10 A ($\sim 2\%$), the transverse shunt impedance has to be kept below 1 M$Ω$/m.

physics.acc-ph↗

arXiv2019

Terahertz oscilloscope for recording time information of ultrashort electron beams

We propose and demonstrate a Terahertz (THz) oscilloscope for recording time information of an ultrashort electron beam. By injecting a laser-driven THz pulse with circular polarization into a dielectric tube, the electron beam is swept helically such that the time information is uniformly encoded into the angular distribution that allows one to characterize both the temporal profile and timing jitter of an electron beam. The dynamic range of the measurement in such a configuration is significantly increased compared to deflection with a linearly polarized THz pulse. With this THz oscilloscope, nearly 50-fold longitudinal compression of a relativistic electron beam to about 15 fs (rms) is directly visualized with its arrival time determined with 3 fs accuracy. This technique bridges the gap between streaking of photoelectrons with optical lasers and deflection of relativistic electron beams with radio-frequency deflectors, and should have wide applications in many ultrashort electron beam based facilities.

physics.acc-ph↗

arXiv2018

Mean Transverse Energy of Ultrananocrystalline Diamond Photocathode

Nitrogen incorporated ultrananocrystalline diamond ((N)UNCD) could be an enabling material platform for photocathode applications due to its high emissivity. While the quantum efficiency (QE) of UNCD was reported by many groups, no experimental measurements of the intrinsic emittance/mean transverse energy (MTE) have been reported. Here, MTE measurement results for an (N)UNCD photocathode in the photon energy range of 4.41 to 5.26 eV are described. The MTE demonstrates no noticeable dependence on the photon energy, with an average value of 266 meV. This spectral behavior is shown to not to be dependent upon physical or chemical surface roughness and inconsistent with low electron effective mass emission from graphitic grain boundaries, but may be associated with emission from spatially-confined states in the graphite regions between the diamond grains. The combined effect of fast-growing QE and constant MTE with respect to the excess laser energy may pave the way to bright UNCD photocathodes.

cond-mat.mtrl-sci↗

arXiv2018

Few-femtosecond Electron Beam with THz-frequency Wakefield-driven Compression

We propose and demonstrate a novel method to produce few-femtosecond electron beam with relatively low timing jitter. In this method a relativistic electron beam is compressed from about 150 fs (rms) to about 7 fs (rms, upper limit) with the wakefield at THz frequency produced by a leading drive beam in a dielectric tube. By imprinting the energy chirp in a passive way, we demonstrate through laser-driven THz streaking technique that no additional timing jitter with respect to an external laser is introduced in this bunch compression process, a prominent advantage over the conventional method using radio-frequency bunchers. We expect that this passive bunching technique may enable new opportunities in many ultrashort-beam based advanced applications such as ultrafast electron diffraction and plasma wakefield acceleration.

physics.acc-ph↗

arXiv2017

Nano-Diamond Thin Film Field Emitter Cartridge for Miniature High Gradient Radiofrequency $X$-band Electron Injector

The complete design, fabrication, and performance evaluation of a compact, single cell, $X$-band ($\sim$9 GHz) electron injector based on a field emission cathode (FEC) are presented. A pulsed electron beam is generated by a 10's of kW radiofrequency (RF) magnetron signal from a plug-in thin film nitrogen-incorporated ultrananocrystalline diamond (N)UNCD FEC cartridge. Testing of the $X$-band injector with the (N)UNCD FEC was conducted in a beamline equipped with a solenoid, Faraday cup and imaging screen. The results show that typically the (N)UNCD FEC cartridge produces $\gtrsim$1 mA/cm$^2$ at a surface electric field of 28 MV/m. The diameter of the output beam generated from the 4.4 mm diameter (N)UNCD cartridge can be as small as 1 mm. In terms of its practical applications, the demonstrated $X$-band electron injector with the (N)UNCD plug-in FEC can serve as a source for X-ray generation, materials processing, travelling-wave tubes (including GHz and THz backward wave oscillators), or can be used to drive slow-wave accelerating structures. The results presented also suggest that this field emitter technology based on planar (N)UNCD thin films, which are simply grown on the surface of optically polished stainless steel, can enable a vast number of device configurations that are efficient, flexible in design, and can be packaged with ease.

physics.acc-ph↗

arXiv2016

Measurements of Terahertz Radiation Generated using a Metallic, Corrugated Pipe

A method for producing narrow-band THz radiation proposes passing an ultra-relativistic beam through a metallic pipe with small periodic corrugations. We present results of a measurement of such an arrangement at Brookhaven's Accelerator Test Facility (ATF). Our pipe was copper and was 5 cm long; the aperture was cylindrically symmetric, with a 1 mm (radius) bore and a corrugation depth (peak-to-peak) of 60 um. In the experiment we measured both the effect on the beam of the structure wakefield and the spectral properties of the radiation excited by the beam. We began by injecting a relatively long beam compared to the wavelength of the radiation, but with short rise time, to excite the structure, and then used a downstream spectrometer to infer the radiation wavelength. This was followed by injecting a shorter bunch, and then using an interferometer (also downstream of the corrugated pipe) to measure the spectrum of the induced THz radiation. For the THz pulse we obtain and compare with calculations: the central frequency, the bandwidth, and the spectral power---compared to a diffraction radiation background signal.

physics.acc-ph↗

arXiv2014

Planar Ultrananocrystalline Diamond Field Emitter in Accelerator RF Electron Injector: Performance Metrics

A case performance study of a planar field emission cathode (FEC) based on nitrogen-incorporated ultrananocrystalline diamond, (N)UNCD, was carried out in an RF 1.3 GHz electron gun. The FEC was a 100 nm (N)UNCD film grown on a 20 mm diameter stainless steel disk with a Mo buffer layer. At surface gradients 45-65 MV/m, peak currents of 1-80 mA (equivalent to 0.3-25 mA/cm$^2$) were achieved. Imaging with two YAG screens confirmed emission from the (N)UNCD surface with (1) the beam emittance of 1.5 mm$\times$mrad/mm-rms, and (2) longitudinal FWHM and rms energy spread of 0.7% and 11% at an electron energy of 2 MeV. Current stability was tested over the course of 36$\times$10$^3$ RF pulses (equivalent to 288$\times$10$^6$ GHz oscillations).

physics.acc-ph↗