arXiv subjects

Sergey Makarov

Publications and source records attributed to Sergey Makarov.

18 recordsLinked to original sources

arXiv2025

Non-Hermitian trapping of Dirac exciton-polariton condensates in a perovskite metasurface

Massless Dirac particles avoid trapping due to their exceptional tunneling properties manifested in the so-called Klein paradox. This conclusion stems from the conservative treatment, but so far, it has not been extended to a non-Hermitian framework. Recently, driven-dissipative bosonic condensation of Dirac exciton-polaritons was demonstrated in metasurface waveguides. Here, we report an experimental observation of spatial binding and energy quantization of Dirac exciton-polaritons in a halide perovskite metasurface. A combination of spatially profiled nonresonant optical excitation and exciton-polariton interaction forms an effective non-Hermitian complex potential responsible for the observed effect. In the case of tightly focused pump spots spanning from 9 to 17~$μ$m, several bound states simultaneously achieve macroscopic occupation, constituting a multi-mode bosonic condensation of exciton-polaritons. Our theoretical analysis based on the driven-dissipative extension of the Dirac equation reveals that the non-Hermitian character of the effective trap allows for confinement even in the case of the gapless Dirac-like photonic dispersion, both above and below the energy of the dispersion crossing.

cond-mat.mes-hall↗

arXiv2025

Deeply Subwavelength Blue-Range Nanolaser

Modern high-definition display and augmented reality technologies require the development of ultracompact micro- and nano-pixels with colors covering the full gamut and high brightness. In this regard, lasing nano-pixels emitting light in the spectral range 400-700 nm are highly demanded. Despite progress in red, green, and ultraviolet nanolasers, the demonstrated blue-range (400-500 nm) single-particle-based lasers are still not subwavelength yet. Here we fabricate CsPbCl$_3$ cubic-shaped single-crystal nanolasers on a silver substrate by wet chemistry synthesis, producing their size range around 100-500 nm, where the nanoparticle with sizes 0.145$μ$m$\times$0.195$μ$m$\times$0.19$μ$m and volume 0.005 $μ$m$^3$ (i.e. $\simλ^3$/13) is the smallest nanolaser among the lasers operating in the blue range reported so far, with emission wavelength around $λ\approx 415$ nm. Experimental results at a temperature of 80 K and theoretical modeling show that the CsPbCl$_3$ nanolaser is a polaritonic laser where exciton-polaritons are strongly coupled with Mie resonances enhanced by the metallic substrate. As a result, the combination of the strong excitonic response of CsPbCl$_3$ materials, its high crystalline quality, and optimized optical resonant properties resulting in a population-inversion-free lasing regime are the key factors making the proposed nanolaser design superior among previously reported ones in the blue spectral range.

physics.optics↗

arXiv2024

Exciton-polariton stimulated scattering in hybrid halide perovskites

Halide perovskites, such as methylammonium lead bromide (MAPbBr$_3$), host tightly bound three-dimensional excitons which are robust at room temperature. Excellent optical properties of MAPbBr$_3$ allow for designing of optical single-mode waveguides and cavities in the frequency range close to the excitonic transitions. Taken together, this turns MAPbBr$_3$ into an excellent platform for probing exciton-polariton nonlinear phenomena at room temperature. Here we investigate ultrafast non-equilibrium dynamics of polaritons under pulsed fs non-resonant excitation. We demonstrate the presence of the stimulated acoustic phonon-assisted scattering regime above threshold pump fluence, characterized by the explosive growth of emission intensity, a redshift of the emission spectral maximum, spectral narrowing, and sub-picosecond emission dynamics. Our theoretical findings are well confirmed by the results of experimental measurements.

cond-mat.mtrl-sci↗

arXiv2023

Subwavelength Raman Laser Driven by Quasi Bound State in the Continuum

Raman lasers is an actively developing field of nonlinear optics aiming to create efficient frequency converters and various optical sensors. Due to the growing importance of ultracompact chip-scale technologies, there is a constant demand for optical devices miniaturization, however, the development of a nanoscale Raman laser remains a challenging endeavor. In this work, we propose a fully subwavelength Raman laser operating in visible range based on a gallium phosphide nanocylinder resonator supporting a quasi bound state in the continuum (quasi-BIC). We perform precise spectral matching of nanoparticle's high-$Q$ modes with the pump and detuned Raman emission wavelengths. As a result of our simulations, we demonstrate a design of Raman nanolaser, ready for experimental realization, with the lasing threshold expected to be as low as $P_{\mathrm{th}} \approx 21~\mathrm{mW}$. The suggested configuration, to the best of our knowledge, represents the very first prototype of a low-threshold Raman nanolaser with all the dimensions smaller than the operational wavelength.

physics.optics↗

arXiv2022

Nonlinear optical heating of all-dielectric super-cavity: efficient light-to-heat conversion through giant thermorefractive bistability

Optical heating of resonant nanostructures is one of the key issues in modern nanophotonics, being either harmful or desirable effect depending on the applications. Despite a linear regime of light-to-heat conversion is well-studied both for metal and semiconductor resonant systems generalized as critical coupling condition, the clear strategy to optimize optical heating upon high-intensity light irradiation is still missing. In this work, we propose a simple analytical model for such problem taking into account material properties changes caused by the heating. It allows us to derive a new general critical coupling condition for the nonlinear case, requiring counterintuitive initial spectral mismatch between the pumping light frequency and resonant one. Basing on the suggested strategy, we develop an optimized design for efficient nonlinear optical heating, which employs a cylindrical nanoparticle supporting quasi bound state in the continuum mode (quasi-BIC or so-called `super-cavity mode') excited by the incident azimuthal vector beam. Our approach provides a background for various nonlinear experiments related to optical heating and bistability, where self-action of the intense laser beam can change resonant properties of the irradiated nanostructure.

physics.optics↗

arXiv2020

High-harmonic generation from metasurfaces empowered by bound states in the continuum

The concept of optical bound states in the continuum (BICs) underpins the existence of strongly localized waves embedded into the radiation spectrum that can enhance the electromagnetic fields in subwavelength photonic structures. Early studies of optical BICs in waveguides and photonic crystals uncovered their topological properties, and the concept of quasi-BIC metasurfaces facilitated applications of strong light-matter interactions to biosensing, lasing, and low-order nonlinear processes. Here we employ BIC-empowered dielectric metasurfaces to generate efficiently high optical harmonics up to the 11th order. We optimize a BIC mode for the first few harmonics and observe a transition between perturbative and nonperturbative nonlinear regimes. We also suggest a general strategy for designing subwavelength structures with strong resonances and nonperturbative nonlinearities. Our work bridges the fields of perturbative and nonperturbative nonlinear optics on the subwavelength scale.

physics.optics↗

arXiv2020

Broadband antireflection with halide-perovskite metasurfaces

Meta-optics based on optically-resonant dielectric nanostructures is a rapidly developing research field with many potential applications. Halide perovskite metasurfaces emerged recently as a novel platform for meta-optics, and they offer unique opportunities for control of light in optoelectronic devices. Here we employ the generalized Kerker conditions to overlap electric and magnetic Mie resonances in each meta-atom of MAPbBr3 perovskite metasurface and demonstrate broadband suppression of reflection down to 4%. We reveal also that metasurface nanostructuring is also beneficial for the enhancement of photoluminescence. Our results may be useful for applications of nanostructured halide perovskites in photovoltaics and semi-transparent multifunctional metadevices where reflection reduction is important for their high efficiency.

physics.optics↗

arXiv2019

Ambipolar perovskite light electrochemical cell for transparent display devices

Perovskite light-emitting diodes (PeLEDs) have recently attracted great research luminescence at room temperature in interest for their narrow emissions and solution processability. Remarkable progress has been achieved PeLEDs in recent years. Here we present the new configuration of ambipolar transparent perovskite light emitting device. The combination of voltage induced p-i-n formation and ionically doped carbon electrodes and allows electroluminescence in forward and reverse bias. Here we present easy-to-do transparent ambipolar light emitting subpixel based on inorganic perovskite and single wall carbon nanotubes. For this experiment PeLEDs were assembled using a glass substrate with ITO stripes as bottom electrode; spin-coated CsPbBr3/I3:PEO composite as emissive layer; single wall carbon nanotubes deposited by a simple press transfer process at room temperature. We demonstrate a concept of stacked multicolor tandem pixel. Stack of transparent light emitting units might allow fine color tuning in parallel tandem connection without segregation compared to mixed halide perovskites. This configuration conforms pixel downsizing and make to fabrication of emissive multijunction pixels in a stack.

physics.app-ph↗

arXiv2019

Dipolar cation accumulation at interfaces of perovskite light emitting solar cells

Ionic migration in organo-halide perovskites plays an important role in operation of perovskite based solar cells and light emitting diodes. Despite the ionic migration being a reversible process, it often leads to worsening of perovskite based device performance, hysteresis in current-voltage characteristics, and phase segregation in mixed halide perovskites being as the most harmful effect. The reason is in dynamical band structure changes, which controllable engineering would solve one of the biggest challenges for development of light-emitting solar cells. Here we demonstrate controllable band bending due to migration of both cation and anion ions in mixed halide perovskite devices. The band structure rearrangement is demonstrated in light emitting solar cells based on the perovskite with organic cations methylammonium (MA+) and formamidinium (FA+), possessing non-zero dipole momentum of 2.29 and 0.21 Debye, respectively, and with PEDOT:PSS and C60 transport layers having a high barrier of 0.8 eV for charge injection. Under applied external voltage MA+ and FA+ cations move towards the electron transport layer and form a dipole layer at the perovskite/electron transport interface, which lowers threshold voltage for electroluminescence down to 1.7 V for MAPbBr2I and 2.6 V for FAPbBr2I, whereas monohalide perovskite MAPbBr3 does not demonstrate such behavior. This ability to in-situ change the device band structure paves the way developing of dual-functional devices based on simple design. It also makes mixed halide perovskites more flexible than mono halides ones for developing different optoelectronic devices without the use of special types of work function modifying transport materials.

physics.app-ph↗

arXiv2019

Optical cooling of lead halide perovskite nanoparticles enhanced by Mie resonances

Halide perovskites is a family of semiconductor materials demonstrating prospective properties for optical cooling owing to efficient luminescence at room temperature and strong electron-phonon interaction. On the other hand, perovskite based nanophotonic designs would allow for efficient optical cooling at nanoscale. Here we propose a novel strategy for enhancement of optical cooling at nanoscale based on optical resonances engineering in halide perovskite nanoparticles. Namely, photoluminescence up-conversion efficiency in a nanoparticle is optimized via excitation of Mie-resonances both at emission and absorption wavelengths. The optimized theoretically photo-induced temperature decrease is achieved for a hybrid halide perovskite (CH$_3$NH$_3$PbI$_3$) 530 nm nanoparticle on a glass substrate by more than 100 K under CW illumination at wavelength 980 nm and moderate intensities (7*10$^6$ W/cm2). The optimized regime originates from simultaneous excitation of magnetic quadrupole and magnetic octopole at pump and emission wavelengths, respectively. The combination of thermally sensitive photoluminescence signal and simplicity in fabrication of halide perovskite nanocavity will pave the way for implementation of nanoscale optical coolers for advanced applications.

physics.app-ph↗

arXiv2018

Mixed Halide Perovskite Light Emitting Solar Cell

Organic-inorganic halide perovskites recently have emerged as a promising material for highly effective light-emitting diodes (LEDs) and solar cells (SCs). Despite efficiencies of both perovskite SCs and LEDs are already among the best, the development of a perovskite dual functional device that is capable of working in these two regimes with high efficiencies is still challenging. Here we demonstrate that the dual functional device based on mixed halide perovskite CH3NH3PbBr2I can be switched from SC to LED with low threshold voltage Vth < 2 V by exposing to Sun at open circuit Voc or at small bias voltage of Vpol ~ 1 - 2 V. Such photo-poling creates in-situ p-i-n junction via methylammonium (CH3NH3+, MA+) and I-/Br- ions migration to interfaces, lowering charge injection barriers, and self-balancing injection currents in perovskite LED. We show that before the photo-poling, the electroluminescence (EL) is highly unstable in LED regime, whereas after the photo-poling, stabilized EL exhibits unusual dynamics, increasing with time and poling cycle number, while Vth and injection current decrease with cycling runs. Additionally, photo-induced and current-induced halide segregation accumulates with cycling, that is found beneficial for LED, increasing its efficiency and brightness, but reversibly degrading photovoltaic (PV) performance, which can be easily recovered.

physics.app-ph↗

arXiv2018

Halide-Perovskite Resonant Nanophotonics

Halide perovskites have emerged recently as promising materials for many applications in photovoltaics and optoelectronics. Recent studies of their optical properties suggest many novel opportunities for a design of advanced nanophotonic devices due to low-cost fabrication, high values of the refractive index, existence of excitons at room temperatures, broadband bandgap tunability, high optical gain and nonlinear response, as well as simplicity of their integration with other types of structures. This paper provides an overview of the recent progress in the study of optical effects originating from nanostructured perovskites, including their potential applications.

physics.app-ph↗

arXiv2016

Demonstration of the enhanced Purcell factor in all-dielectric structures

The Purcell effect is usually described as a modification of the spontaneous decay rate in the presence of a resonator. In plasmonics, this effect is commonly associated with a large local-field enhancement in "hot spots" due to the excitation of surface plasmons. However, high-index dielectric nanostructures, which become the basis of all-dielectric nanophotonics, can not provide high values of the local-field enhancement due to larger radiation losses. Here, we demonstrate how to achieve a strong Purcell effect in all-dielectric nanostructures, and show theoretically that the Purcell factor can be increased by two orders of magnitude in a finite chain of silicon nanoparticles. Using the eigenmode analysis for an infinite chain, we demonstrate that the high Purcell factor regime is associated with a Van Hove singularity. We perform a proof-of-concept experiment for microwave frequencies and observe the 65-fold enhancement of the Purcell factor in a chain of 10 dielectric particles.

physics.optics↗

arXiv2016

Enhancement of perovskite solar cells by plasmonic nanoparticles

Synthetic perovskites with photovoltaic properties open a new era in solar photovoltaics. Due to high optical absorption perovskite-based thin-film solar cells are usually considered as fully absorbing solar radiation on condition of ideal blooming. However, is it really so? The analysis of the literature data has shown that the absorbance of all photovoltaic pervoskites has the spectral hole at infrared frequencies where the solar radiation spectrum has a small local peak. This absorption dip results in the decrease of the optical efficiency of thin-film pervoskite solar cells by nearly 3% and close the ways of utilise them at this range for any other applications. In our work we show that to cure this shortage is possible complementing the basic structure by an inexpensive plasmonic array.

physics.optics↗

arXiv2015

Ion-beam assisted laser fabrication of sensing plasmonic nanostructures

Simple high-performance two-stage hybrid technique was developed for fabrication of different plasmonic nanostructures, including nanorods, nanorings, as well as more complex structures on glass substrates. In this technique a thin noble metal film on a dielectric substrate is irradiated by a tightly focused single nanosecond laser pulse and then the modified region is slowly polished by an accelerated argon ion (Ar+) beam. As a result, each nanosecond laser pulse locally modifies the initial metal film through initiation of fast melting and subsequent hydrodynamic processes, while the following Ar+-ion polishing removes the rest of the film, revealing the hidden topography features and fabricating separate plasmonic structures on the glass substrate. We demonstrate that the shape and lateral size of the resulting functional plasmonic nanostructures depends on the laser pulse energy and metal film thickness, while subsequent Ar+-ion polishing enables to vary height of the resulting nanostructures. The plasmonic properties of the fabricated nanostructures were characterized by dark-field micro-spectroscopy, Raman and photoluminescence measurements from single nanofeatures, as well as by supporting numerical calculations of the related electromagnetic near-fields and Purcell factors. The developed simple two-stage technique represents a next step towards direct large-scale laser-induced fabrication of highly-ordered arrays of complex plasmonic nanostructures.

physics.optics↗

arXiv2015

Tuning of magnetic optical response in a dielectric nanoparticle by ultrafast photo-injection of dense electron-hole plasma

We propose a novel approach for efficient tuning of optical properties of a high refractive index subwavelength nanoparticle with a magnetic Mie-type resonance by means of femtosecond laser irradiation. This concept is based on ultrafast photo-injection of dense (>10^20 cm^-3) electron-hole plasma within such nanoparticle, drastically changing its transient dielectric permittivity. This allows to manipulate by both electric and magnetic nanoparticle responses, resulting in dramatic changes of its scattering diagram and scattering cross section. We experimentally demonstrate 20 % tuning of reflectance of a single silicon nanoparticle by femtosecond laser pulses with wavelength in the vicinity of the magnetic dipole resonance. Such single-particle nanodevice enables to design fast and ultracompact optical switchers and modulators.

physics.optics↗

arXiv2015

Large Purcell enhancement without strong field localization

The Purcell effect is defined as the modification of spontaneous decay in the presence of a resonator, and in plasmonics it is usually associated with the large local-field enhancement in "hot spots" due to surface plasmon polaritons. Here we propose a novel strategy for enhancing the Purcell effect through engineering the radiation directivity without a strict requirement of the local field enhancement. Employing this approach, we demonstrate how to enhance the Purcell effect by two orders of magnitude in all-dielectric nanostructures recently suggested as building blocks of low-loss nanophotonics and metamaterials. We support our concept by proof-of-principle microwave experiments with arrays of high-index dielectric resonators.

physics.optics↗

arXiv2015

Towards all-dielectric metamaterials and nanophotonics

We review a new, rapidly developing field of all-dielectric nanophotonics which allows to control both magnetic and electric response of structured matter by engineering the Mie resonances in high-index dielectric nanoparticles. We discuss optical properties of such dielectric nanoparticles, methods of their fabrication, and also recent advances in all-dielectric metadevices including couple-resonator dielectric waveguides, nanoantennas, and metasurfaces.

physics.optics↗