arXiv subjects

Sergi Liesegang

Publications and source records attributed to Sergi Liesegang.

16 recordsLinked to original sources

arXiv2026

Joint Detection and Velocity Estimation in OFDM-ISAC Cell-Free Massive MIMO Networks

This paper develops a sensing framework for cell-free massive MIMO (CF-mMIMO) networks operating under orthogonal frequency division multiplexing (OFDM)-based integrated sensing and communication (ISAC). The framework explicitly incorporates the 3D bistatic Doppler geometry across distributed access points (APs) into a generalized likelihood ratio test (GLRT) detector. To address system scalability, a user-target-centric AP association approach is utilized. The 3D velocity vector of the target is estimated, and several search and optimization strategies, including coarse grid search, gradient-based refinement, and particle swarm optimization (PSO), are developed and evaluated. Simulation results demonstrate that the proposed PSO-aided detector achieves the most favorable accuracy-complexity trade-off, while Doppler mismatch can cause substantial sensing signal-to-noise ratio (SNR) degradation in high-mobility scenarios. Additionally, leveraging more OFDM subcarriers enhances frequency-domain diversity and yields further sensing-SNR gains.

eess.SP↗

arXiv2026

Optimization of CF-mMIMO Systems for the Coexistence between eMBB+ and mMTC+: From Analytical to GNN-Aided Designs

This paper investigates uplink multiple access for the coexistence of enhanced mobile broadband+ (eMBB+) and massive machine-type communications+ (mMTC+) in terminal-centric cell-free massive MIMO (CF-mMIMO) systems. We propose a non-orthogonal scheme in which low-rate mMTC+ transmissions are spread across the time-frequency grid shared with eMBB+ users, enabling efficient resource reuse. In the presence of imperfect channel state information, we derive closed-form expressions for the achievable rates of both services based solely on statistical channel knowledge. For mMTC+ devices, the analysis also incorporates finite blocklength (FBL) modeling to capture short-packet transmissions. To support heterogeneous service requirements, we formulate a power-control problem that maximizes the minimum energy efficiency of mMTC+ devices subject to quality-of-service constraints on eMBB+ users. The resulting nonconvex problem is solved via sequential fractional programming, accounting for both the Shannon and FBL regimes. To enable real-time operation, we further propose a graph neural network (GNN) with multi-head attention to approximate the model-based solution. Constraint satisfaction during training is enforced via an augmented Lagrangian loss. Numerical results demonstrate effective multiplexing of the two data services and show that the proposed GNN algorithm achieves near-optimal performance with a significantly lower computational complexity.

cs.IT↗

arXiv2026

A Comparison Between Co-Located and Distributed MIMO Deployments in OFDM-ISAC Networks

This paper investigates network-level integrated sensing and communication (ISAC) under two fundamentally different topology configurations: cell-free massive MIMO (CF-mMIMO) and multi-cell massive MIMO (MC-mMIMO). A unified OFDM-based waveform is adopted for both architectures as the key enabler for ISAC functionalities. The CF system exploits distributed access points (APs) and a scalable user-target-centric operation, whereas the MC system relies on co-located transmit-receive arrays with conventional cell-centric deployment. For both architectures, we derive a GLRT-based sensing detector and the corresponding sensing SNR expressions. We then examine a series of case studies investigating how the number of OFDM subcarriers, the transceiver allocation strategy, and the antenna/node distribution across the network affect the sensing performance. The results consistently demonstrate that CF-mMIMO provides more robust and higher sensing performance across most tested scenarios, particularly when transmit resources or antenna elements are spatially distributed. These findings highlight the inherent advantages of CF deployments for next-generation ISAC networks.

cs.IT↗

arXiv2026

Design of RIS-aided mMTC+ Networks for Rate Maximization under the Finite Blocklength Regime with Imperfect Channel Knowledge

Within the context of massive machine-type communications+, reconfigurable intelligent surfaces (RISs) represent a promising technology to boost system performance in scenarios with poor channel conditions. Considering single-antenna sensors transmitting short data packets to a multiple-antenna collector node, we introduce and design an RIS to maximize the weighted sum rate (WSR) of the system working in the finite blocklength regime. Due to the large number of reflecting elements and their passive nature, channel estimation errors may occur. In this letter, we then propose a robust RIS optimization to combat such a detrimental issue. Based on concave bounds and approximations, the nonconvex WSR problem for the RIS response is addressed via successive convex optimization (SCO). Numerical experiments validate the performance and complexity of the SCO solutions.

eess.SP↗

arXiv2026

Robust Design of Reconfigurable Intelligent Surfaces for Parameter Estimation in MTC

This paper introduces a reconfigurable intelligent surface (RIS) to support parameter estimation in machine-type communications (MTC). We focus on a network where single-antenna sensors transmit spatially correlated measurements to a multiple-antenna collector node (CN) via non-orthogonal multiple access. We propose an estimation scheme based on the minimum mean square error (MMSE) criterion. We also integrate successive interference cancelation (SIC) at the receiver to mitigate communication failures in noisy and interference-prone channels under the finite blocklength (FBL) regime. Moreover, recognizing the importance of channel state information (CSI), we explore various methodologies for its acquisition at the CN. We statistically design the RIS configuration and SIC decoding order to minimize estimation error while accounting for channel temporal variations and short packet lengths. To mirror practical systems, we incorporate the detrimental effects of FBL communication and imperfect CSI errors in our analysis. Simulations demonstrate that larger reflecting surfaces lead to smaller MSEs and underscore the importance of selecting an appropriate decoding order for accuracy and ultimate performance.

eess.SP↗

arXiv2025

EMF-Compliant Power Control in Cell-Free Massive MIMO: Model-Based and Data-Driven Approaches

The impressive growth of wireless data networks has recently led to increased attention to the issue of electromagnetic pollution and the fulfillment of electromagnetic field (EMF) exposure limits. This paper tackles the problem of power control in user-centric cell-free massive multiple-input-multiple-output (CF-mMIMO) systems under EMF constraints. Specifically, the power allocation maximizing the minimum data rate across users is derived for both the uplink and the downlink. To solve such optimization problems, two approaches are proposed, i.e., model-based and data-driven. The proposed model-based solutions for the downlink utilize successive convex optimization and the log-sum-exp approximation for the minimum of a discrete set, whereas ordinary techniques are employed for the uplink. With regard to data-driven solutions, solutions based on both end-to-end architectures and deep unfolding techniques are explored. Extensive numerical results confirm that the proposed model-based solutions effectively fulfill the EMF constraints while ensuring very good performance; moreover, the results show that the proposed data-driven approaches can tightly approximate the performance of model-based solutions but with much lower computational complexity.

eess.SP↗

arXiv2025

Coexistence of eMBB+ and mMTC+ in Uplink Cell-Free Massive MIMO Networks

This paper tackles the problem of designing proper uplink multiple access schemes for coexistence between enhanced mobile broadband+ (eMBB+) users and massive machine-type communications+ (mMTC+) devices in a terminal-centric cell-free massive MIMO system. Specifically, the use of a time-frequency spreading technique for the mMTC+ devices has been proposed. Coupled with the assumption of imperfect channel knowledge, closed-form bounds of the achievable (ergodic) rate for the two data services are derived. Using suitable power control mechanisms, we show it is possible to efficiently multiplex eMBB+ and mMTC+ traffic in the same time-frequency resource grid. Numerical experiments reveal interesting trade-offs in the selection of the spreading gain and the number of serving access points within the system. Results also demonstrate that the performance of the mMTC+ devices is slightly affected by the presence of the eMBB+ users. Overall, our approach can endow good quality of service to both 6G cornerstones at once.

cs.IT↗

arXiv2025

Power Control Design for ISAC Optimization in User-Target-Centric Cell-Free mMIMO Networks

This paper addresses the power control design for a cell-free massive MIMO (CF-mMIMO) system that performs integrated sensing and communications (ISAC). Specifically, the case where many access points are deployed to simultaneously communicate with mobile users and monitor the surrounding environment at the same time-frequency slot is considered. On top of the user-centric architecture used for the data services, a target-centric approach is introduced for the detection tasks. As a valuable performance metric, we derive the receive sensing signal-to-noise (SNR) ratio under generalized likelihood ratio test processing. Based on that, we formulate a quality-of-service (QoS) scheme that maximizes the two figures of merit: achievable data rate and effective sensing SNR. Simulations demonstrate that our proposal surpasses orthogonal resource algorithms, underscoring the potential of ISAC-enabled CF-mMIMO networks.

eess.SP↗

arXiv2025

Scalable Integrated Sensing and Communications for Multi-Target Detection and Tracking in Cell-Free Massive MIMO: A Unified Framework

This paper investigates a cell-free massive MIMO (multiple-input multiple-output) system where distributed access points (APs) perform integrated sensing and communications (ISAC) tasks, enabling simultaneous user communication and target detection/tracking. A unified framework and signal model are developed for the detection of potential targets and tracking of previously detected ones, even in arbitrary positions. Leveraging the Generalized Likelihood Ratio Test technique, novel detection/tracking algorithms are proposed to handle unknown target responses and interference. Scalable AP-user and AP-target association rules are evaluated, explicitly considering multi-zone sensing scenarios. Additionally, a scalable power control mechanism extends fractional power control principles to ISAC, balancing power allocation between communication and sensing tasks. For benchmarking, a non-scalable power control optimization problem is also formulated to maximize the minimum user data rate while ensuring a Quality of Service constraint for sensing, solved via successive convex approximation. Extensive numerical results validate the proposed framework, demonstrating its effectiveness in both communication and sensing, revealing the impact of interference from other targets, and highlighting fundamental trade-offs between sensing and communication performance.

cs.IT↗

arXiv2024

Rate Optimization for RIS-Aided mMTC Networks in the Finite Blocklength Regime

Reconfigurable intelligent surfaces (RISs) have become a promising candidate for the development of future mobile systems. In the context of massive machine-type communications (mMTC), a RIS can be used to support the transmission from a group of sensors to a collector node. Due to the short data packets, we focus on the design of the RIS for maximizing the weighted sum and minimum rates in the finite blocklength regime. Under the assumption of non-orthogonal multiple access, successive interference cancelation is considered as a decoding scheme to mitigate interference. Accordingly, we formulate the optimizations as non-convex problems and propose two sub-optimal solutions based on gradient ascent (GA) and sequential optimization (SO) with semi-definite relaxation (SDR). In the GA, we distinguish between Euclidean and Riemannian gradients. For the SO, we derive a concave lower bound for the throughput and maximize it sequentially applying SDR. Numerical results show that the SO can outperform the GA and that strategies relying on the optimization of the classical Shannon capacity might be inadequate for mMTC networks.

eess.SP↗

arXiv2024

Entropy-Based Sensing Schemes for Energy Efficiency in Massive MTC

Machine-type communications (MTC) are crucial in the evolution of mobile communication systems. Within this context, we distinguish the so-called massive MTC (mMTC), where a large number of devices coexist in the same geographical area. In the case of sensors, a high correlation in the collected information is expected. In this letter, we evaluate the impact of correlation on the entropy of a set of quantized Gaussian sources. This model allows us to express the sensed data with the data correlation matrix. Given the nature of mMTC, these matrices may be well approximated as rank deficient. Accordingly, we exploit this singularity to design a technique for switching off several sensors that maximizes the entropy under power-related constraints. The discrete optimization problem is transformed into a convex formulation that can be solved numerically.

eess.SP↗

arXiv2024

Sensor Selection and Distributed Quantization for Energy Efficiency in Massive MTC

This paper presents an estimation approach within the framework of uplink massive machine-type communications (mMTC) that considers the energy limitations of the devices. We focus on a scenario where a group of sensors observe a set of parameters and send the measured information to a collector node (CN). The CN is responsible for estimating the original observations, which are spatially correlated and corrupted by measurement and quantization noise. Given the use of Gaussian sources, the minimum mean squared error (MSE) estimation is employed and, when considering temporal evolution, the use of Kalman filters is studied. Based on that, we propose a device selection strategy to reduce the number of active sensors and a quantization scheme with adjustable number of bits to minimize the overall payload. The set of selected sensors and quantization levels are, thus, designed to minimize the MSE. For a more realistic analysis, communication errors are also included by averaging the MSE over the error decoding probabilities. We evaluate the performance of our strategy in a practical mMTC system with synthetic and real databases. Simulation results show that the optimization of the payload and the set of active devices can reduce the power consumption without compromising the estimation accuracy.

eess.SP↗

arXiv2024

Approximations of the Aggregated Interference Statistics for Outage Analysis in Massive MTC

This paper presents several analytic closed-form approximations of the aggregated interference statistics within the framework of uplink massive machine-type communications (mMTC), taking into account the random activity of the sensors. Given its discrete nature and the large number of devices involved, a continuous approximation based on the Gram--Charlier series expansion of a truncated Gaussian kernel is proposed. We use this approximation to derive an analytic closed-form expression for the outage probability, corresponding to the event of the signal-to-interference-and-noise ratio being below a detection threshold. This metric is useful since it can be used for evaluating the performance of mMTC systems. We analyze, as an illustrative application of the previous approximation, a scenario with several multi-antenna collector nodes, each equipped with a set of predefined spatial beams. We consider two setups, namely single- and multiple-resource, in reference to the number of resources that are allocated to each beam. A graph-based approach that minimizes the average outage probability, and that is based on the statistics approximation, is used as allocation strategy. Finally, we describe an access protocol where the resource identifiers are broadcast (distributed) through the beams. Numerical simulations prove the accuracy of the approximations and the benefits of the allocation strategy.

eess.SP↗

arXiv2024

Scalability and Implementation Aspects of Cell-Free Massive MIMO for ISAC

This paper addresses the problem of scalability for a cell-free massive MIMO (CF-mMIMO) system that performs integrated sensing and communications (ISAC). Specifically, the case where a large number of access points (APs) are deployed to perform simultaneous communication with mobile users and monitoring of the surrounding environment in the same time-frequency slot is considered, and a target-centric approach on top of the user-centric architecture used for communication services is introduced. In the paper, other practical aspects such as the fronthaul load and scanning protocol are also considered. The proposed scalable ISAC-enabled CF-mMIMO network has lower levels of system complexity, permits managing the scenario in which multiple targets are to be tracked/sensed by the APs, and achieves performance levels superior or, in some cases, close to those of the non-scalable solutions.

cs.IT↗

arXiv2024

EMF-Aware Power Control for Massive MIMO: Cell-Free versus Cellular Networks

The impressive growth of wireless data networks has recently led to increased attention to the issue of electromagnetic pollution. Specific absorption rates and incident power densities have become popular indicators for measuring electromagnetic field (EMF) exposure. This paper tackles the problem of power control in user-centric cell-free massive multiple-input-multiple-output (CF-mMIMO) systems under EMF constraints. Specifically, the power allocation maximizing the minimum data rate across users is derived for both the uplink and the downlink under EMF constraints. The developed solution is also applied to a cellular mMIMO system and compared to other benchmark strategies. Simulation results prove that EMF safety restrictions can be easily met without jeopardizing the minimum data rate, that the CF-mMIMO outperforms the multi-cell massive MIMO deployment, and that the proposed power control strategy greatly improves the system fairness.

cs.IT↗

arXiv2020

Stochastic Geometry Analysis and Design of Wireless Powered MTC Networks

Machine-type-communications (MTC) are being crucial in the development of next generation mobile networks. Given that MTC devices are usually battery constrained, wireless power transfer (WPT) and energy harvesting (EH) have emerged as feasible options to enlarge the lifetime of the devices, leading to wireless powered networks. In that sense, we consider a setup where groups of sensors are served by a base station (BS), which is responsible for the WPT. Additionally, EH is used to collect energy from the wireless signals transmitted by other sensors. To characterize the energy obtained from both procedures, we model the sporadic activity of sensors as Bernoulli random variables and their positions with repulsive Matérn cluster processes. This way, the random activity and spatial distribution of sensors are introduced in the analysis of the energy statistics. This analysis can be useful for system design aspects such as energy allocation schemes or optimization of idle-active periods, among others. As an example of use of the developed analysis, we include the design of a WPT scheme under a proportional fair policy.

eess.SP↗