arXiv subjects

Sergio Calatroni

Publications and source records attributed to Sergio Calatroni.

At least 19 recordsLinked to original sources

arXiv2026

Technical Proposal for the Atom Interferometer CERN Experiment (AICE) Facility

We present the technical proposal for the Atom Interferometer CERN Experiment (AICE), a $\mathcal{O}(100)$ m vertical atom interferometer to be installed against the wall of the PX46 access shaft to the LHC. AICE is conceived as a versatile and flexible long-baseline atom-interferometry facility whose primary scientific goal is probing for bosonic ultralight dark matter (ULDM) in a mass range inaccessible to other experiments, with a secondary goal of pioneering the exploration of gravitational waves (GWs) with frequencies in the range ${\sim}$0.03-3 Hz as a pathfinder for future longer-baseline detectors. The initial configuration employs ultracold $^{87}$Sr atoms in a single-photon 698-nm interferometer with three shaft-based atom sources in a multi-source gradiometer geometry, supported by one surface reference source for laser stabilisation and diagnostics, to target scalar ULDM. Operation with $^{88}$Sr will give sensitivity to axion-like particles (ALPs), vector ULDM with $B-L$ couplings and violation of the principle of equivalence, while a $^{171}$Yb upgrade will improve the sensitivity to $B-L$ couplings and equivalence violations. Probing the Einstein equivalence principle (EP) and measuring $\alpha$ will proceed in parallel with the ULDM searches. A conceptual feasibility study and a detailed technical implementation study have established that PX46 is a uniquely mature and implementation-ready site, with no technical showstoppers. Completing site preparation works during LS3 would enable the subsequent installation and operation of AICE without impacting HL-LHC operations. The detector design builds on the VLBAI and MAGIS experiments and the AION-10 Technical Design Report, scaling the strontium gradiometer architecture to the $\sim$100 m baseline. AICE is endorsed by the TVLBAI Proto-Collaboration, comprising 57 institutions in 22 countries.

hep-ex↗

arXiv2025

MuCol Milestone Report No. 7: Consolidated Parameters

This document is comprised of a collection of consolidated parameters for the key parts of the muon collider. These consolidated parameters follow on from the October 2024 Preliminary Parameters Report. Attention has been given to a high-level consistent set of baseline parameters throughout all systems of the complex, following a 10 TeV center-of-mass design. Additional details of the designs contributing to this baseline design are featured in the appendix. Likewise, explorative variations from this baseline set can be found in the appendix. The data is collected from a collaborative spreadsheet and transferred to overleaf.

physics.acc-ph↗

arXiv2025

Microwave surface resistance of Tl-1223 films in a dc magnetic field

We present first preliminary surface impedance measurements on Tl-1223 films in dc magnetic fields, in view of potential applications for the next generation Future Circular Collider (FCC-hh) at CERN. The Tl-1223 samples were produced through laser ablation, with nominal thickness of 1 {\mu}m and grown on a thick LaAl2O3 substrate. The presence of Tl-1212 phase identified by XRD and BSE microscopy, could be avoided by changing the oxygen partial pressure during heat treatment. The high-frequency transport properties of the samples were characterized using microwave resonant devices, at fixed frequencies of 14.9 GHz, 24.2 GHz and 26.7 GHz, in the temperature range 40 K to 140 K. An external applied static magnetic field up to 12 T was applied. Samples from subsequent batches exhibited huge improvements in the microwave properties, confirming the progress in the deposition technique.

cond-mat.supr-con↗

arXiv2025

Non-Linear Dynamics Induced by Strong Radio-Frequency Fields in ReBCO High Temperature Superconductors

Probing the dynamics of superconducting transitions induced by strong electromagnetic fields is vital to designing high power devices leveraging these materials. The development of high temperature superconductors (HTS) is particularly interesting due to critical temperatures ($T_c$) approaching 90\,K, the ability to support high current densities, and their ability to operate in strong static magnetic fields. This work aims to determine the transition dynamics of these materials at radio-frequencies (rf) in the microwave range where they have enormous potential for new applications ranging from particle accelerators to dark matter searches. We have tested two types of coatings formed from rare earth barium copper oxide (REBCO): a film deposited by electron-beam physical vapor deposition, and HTS conductor tapes soldered to a copper substrate with exposed REBCO surfaces. Testing was performed via a hemispherical transverse-electric mode cavity that maximizes the surface rf magnetic field and minimizes the surface electric field on a 2-inch diameter sample. We report on steady-state measurements at low rf power, as well as fully time-resolved transition dynamics on the microsecond timescale seen for the first time with strong surface rf fields.

physics.acc-ph↗

arXiv2025

Letter of Intent: AICE -- 100m Atom Interferometer Experiment at CERN

We propose an O(100)m Atom Interferometer (AI) experiment -- AICE -- to be installed against a wall of the PX46 access shaft to the LHC. This experiment would probe unexplored ranges of the possible couplings of bosonic ultralight dark matter (ULDM) to atomic constituents and undertake a pioneering search for gravitational waves (GWs) at frequencies intermediate between those to which existing and planned experiments are sensitive, among other fundamental physics studies. A conceptual feasibility study showed that this AI experiment could be isolated from the LHC by installing a shielding wall in the TX46 gallery, and surveyed issues related to the proximity of the LHC machine, finding no technical obstacles. A detailed technical implementation study has shown that the preparatory civil-engineering work, installation of bespoke radiation shielding, deployment of access-control systems and safety alarms, and installation of an elevator platform could be carried out during LS3, allowing installation and operation of the AICE detector to proceed during Run 4 without impacting HL-LHC operation. These studies have established that PX46 is a uniquely promising location for an AI experiment. We foresee that, if the CERN management encourages this Letter of Intent, a significant fraction of the Terrestrial Very Long Baseline Atom Interferometer (TVLBAI) Proto-Collaboration may wish to contribute to AICE.

hep-ex↗

arXiv2025

A Prototype Hybrid Mode Cavity for Heterodyne Axion Detection

In the heterodyne approach to axion detection, axion dark matter induces transitions between two modes of a microwave cavity, resulting in a parametrically enhanced signal power. We describe the fabrication and characterization of a prototype normal conducting cavity specifically optimized for heterodyne detection. Corrugations on the cavity walls support linearly polarized hybrid modes which maximize the signal power while strongly suppressing noise. We demonstrate tuning mechanisms which allow one mode's frequency to be scanned across a 4 MHz range, while suppressing cross-coupling noise by at least 80 dB. A future superconducting cavity with identical geometry to our prototype would have the potential to probe orders of magnitude beyond astrophysical bounds.

physics.ins-det↗

arXiv2025

The Muon Collider

Muons offer a unique opportunity to build a compact high-energy electroweak collider at the 10 TeV scale. A Muon Collider enables direct access to the underlying simplicity of the Standard Model and unparalleled reach beyond it. It will be a paradigm-shifting tool for particle physics representing the first collider to combine the high-energy reach of a proton collider and the high precision of an electron-positron collider, yielding a physics potential significantly greater than the sum of its individual parts. A high-energy muon collider is the natural next step in the exploration of fundamental physics after the HL-LHC and a natural complement to a future low-energy Higgs factory. Such a facility would significantly broaden the scope of particle colliders, engaging the many frontiers of the high energy community. The last European Strategy for Particle Physics Update and later the Particle Physics Project Prioritisation Panel in the US requested a study of the muon collider, which is being carried on by the International Muon Collider Collaboration. In this comprehensive document we present the physics case, the state of the work on accelerator design and technology, and propose an R\&D project that can make the muon collider a reality.

physics.acc-ph↗

arXiv2025

Long-Baseline Atom Interferometry

Long-baseline atom interferometry is a promising technique for probing various aspects of fundamental physics, astrophysics and cosmology, including searches for ultralight dark matter (ULDM) and for gravitational waves (GWs) in the frequency range around 1~Hz that is not covered by present and planned detectors using laser interferometry. The MAGIS detector is under construction at Fermilab, as is the MIGA detector in France. The PX46 access shaft to the LHC has been identified as a very suitable site for an atom interferometer of height $\sim 100$m, sites at the Boulby mine in the UK and the Canfranc Laboratory are also under investigation, and possible sites for km-class detectors have been suggested. The Terrestrial Very-Long-Baseline Atom Interferometry (TVLBAI) Proto-Collaboration proposes a coordinated programme of interferometers of increasing baselines.

hep-ex↗

arXiv2025

Fundamentals of Vacuum Breakdown in High-Field Systems

This review consolidates experimental, theoretical, and simulation work examining the behavior of high-field devices and the fundamental process of vacuum arc initiation, commonly referred to as breakdown. Detailed experimental observations and results relating to a wide range of aspects of high-field devices, including conditioning, field and temperature dependence of breakdown rate, and the ability to sustain high electric fields as a function of device geometry and materials, are presented. The different observations are then addressed theoretically, and with simulation, capturing the sequence of processes that lead to vacuum breakdown and explaining the major observed experimental dependencies. The core of the work described in this review was carried out by a broad multi-disciplinary collaboration in an over a decade-long program to develop high-gradient, 100 MV/m-range, accelerating structures for the CLIC project, a possible future linear-collider high-energy physics facility. Connections are made to the broader linear collider, high-field, and breakdown communities.

physics.app-ph↗

arXiv2024

Terrestrial Very-Long-Baseline Atom Interferometry: Summary of the Second Workshop

This summary of the second Terrestrial Very-Long-Baseline Atom Interferometry (TVLBAI) Workshop provides a comprehensive overview of our meeting held in London in April 2024, building on the initial discussions during the inaugural workshop held at CERN in March 2023. Like the summary of the first workshop, this document records a critical milestone for the international atom interferometry community. It documents our concerted efforts to evaluate progress, address emerging challenges, and refine strategic directions for future large-scale atom interferometry projects. Our commitment to collaboration is manifested by the integration of diverse expertise and the coordination of international resources, all aimed at advancing the frontiers of atom interferometry physics and technology, as set out in a Memorandum of Understanding signed by over 50 institutions.

hep-ex↗

arXiv2024

MuCol Milestone Report No. 5: Preliminary Parameters

This document is comprised of a collection of updated preliminary parameters for the key parts of the muon collider. The updated preliminary parameters follow on from the October 2023 Tentative Parameters Report. Particular attention has been given to regions of the facility that are believed to hold greater technical uncertainty in their design and that have a strong impact on the cost and power consumption of the facility. The data is collected from a collaborative spreadsheet and transferred to overleaf.

physics.acc-ph↗

arXiv2024

Electron Beam Characterization of REBCO-Coated Conductors at Cryogenic Conditions

Particle accelerators with superconducting magnets operating at cryogenic temperatures use a beam screen (BS) liner that extracts heat generated by the circulating bunched charge particle beam before it can reach the magnets. The BS surface, commonly made of high-conductivity copper, provides a low impedance for beam stability reasons, low secondary electron yield (SEY)to mitigate the electron-cloud (EC) effect, and low electron-stimulated desorption yield (ESD) to limit the dynamic pressure rise due to EC. Rare-earth barium copper oxide (REBCO) high-temperature superconductors (HTs) recently reached technical maturity, are produced as coated conductor tapes (REBCO-CCs), and will be considered for application in future colliders to decrease the BS impedance and enable operation at around 50 K, consequently relaxing the cryogenic requirements. Aside from HTS properties, industry-grade REBCO-CCs also need qualification for EC and dynamic vacuum compatibility under accelerator-like conditions. Hence, we report the SEY and ESD measured at cryogenic temperatures of 12 K under low-energy electron irradiation of 0 - 1.4 keV. We also verify the sample compositions and morphologies using XPS, SEM, and EDS methods. The energy and dose dependencies of ESD are comparable to those of technical-grade metals and one sample reached SEY$_{MAX}=$1.2 after electron conditioning.

physics.acc-ph↗

arXiv2024

Surface and sub-surface modifications of copper electrodes exposed to high-field conditioning at cryogenic temperatures

In order to investigate the dependence of conditioning and field-holding on temperature, three pairs of copper electrodes underwent high voltage conditioning with direct current (DC) pulses while kept at a single temperature, unique for each set (300~K, 30~K and 10~K), until saturation field for each set was found. The sets conditioned at cold showed a significant increase in the field holding capability, reaching fields up to 147 MV/m after tens of millions of pulses and very few breakdowns (BDs). We interpret this as an indication of the conditioning effect being due to high field pulsing rather than exposure to BDs. The effect of the warm and cold conditioning was investigated with high-resolution microscopy, characterizing the BD spots on the anode and cathode according to their morphology and with scanning transmission electron microscopy (STEM) analyzing the changes in the sub-surface regions. Atypical BD spot features were found on the cryogenically conditioned cathode surfaces, with very shallow craters of a star-like shape. The number of atypical spots increased with decreased temperatures, reaching 26 and 53 percent of the total number of spots at 30~K and 10~K, respectively. A hypothesis explaining the formation of these features is also presented. The very different morphology of the anode and cathode BD spots is presented in detail that suggesting an unknown shielding mechanism that prevents the center of the anode spot from melting. These results provide important experimental input for the development of quantitative theories and models for BD initiation and inter-electrode plasma formation.

physics.acc-ph↗

arXiv2023

Split-cavity tuning of a rectangular axion haloscope operating around 8.4 GHz

The axion haloscope is the currently most sensitive method to probe the vanishingly small coupling of this prominent Dark Matter candidate to photons. To scan a sizeable axion Dark Matter parameter space, the cavities that make up the haloscope need to be tuned efficiently. In this article, we describe a novel technique to tune axion haloscopes around $8.4$~GHz in a purely mechanical manner without the use of dielectrics. We achieve tuning by introducing a gap along the cavity geometry. A quality factor reduction of less than 20\% is achieved experimentally for a tuning range of around 600~MHz at room temperature and at cryogenic temperatures for around 300~MHz. A larger tuning range would require an improved alignments mechanism. We present the results of a corresponding prototype and outline prospects to further develop this technique.

physics.ins-det↗

arXiv2023

Terrestrial Very-Long-Baseline Atom Interferometry: Workshop Summary

This document presents a summary of the 2023 Terrestrial Very-Long-Baseline Atom Interferometry Workshop hosted by CERN. The workshop brought together experts from around the world to discuss the exciting developments in large-scale atom interferometer (AI) prototypes and their potential for detecting ultralight dark matter and gravitational waves. The primary objective of the workshop was to lay the groundwork for an international TVLBAI proto-collaboration. This collaboration aims to unite researchers from different institutions to strategize and secure funding for terrestrial large-scale AI projects. The ultimate goal is to create a roadmap detailing the design and technology choices for one or more km-scale detectors, which will be operational in the mid-2030s. The key sections of this report present the physics case and technical challenges, together with a comprehensive overview of the discussions at the workshop together with the main conclusions.

hep-ex↗

arXiv2022

Comparative study of H accumulation in differently oriented grains of Cu

When metal surfaces are exposed to hydrogen ion irradiation, the light ions are expected to penetrate deep into the material and dissolve in the matrix. However, these atoms are seen to cause significant modification of surfaces, indicating that they accumulate in vicinity of the surface. The process known as blistering may reduces the vacuum dielectric strength above the metal surface, which shows a dense population of surface blisters. In this paper, we investigate how a bubble can grow under the pressure exerted by hydrogen atoms on the walls of the bubble and how this affect to the surface of Cu, whether an external electric field is applied or not.

cond-mat.mtrl-sci↗

arXiv2020

Effect of dc voltage pulsing on high-vacuum electrical breakdowns near Cu surfaces

Vacuum electrical breakdowns, also known as vacuum arcs, are a limiting factor in many devices that are based on application of high electric fields near their component surfaces. Understanding of processes that lead to breakdown events may help mitigating their appearance and suggest ways for improving operational efficiency of power-consuming devices. Stability of surface performance at a given value of the electric field is affected by the conditioning state, i.e. how long the surface was exposed to this field. Hence, optimization of the surface conditioning procedure can significantly speed up the preparatory steps for high-voltage applications. In this article, we use pulsed dc systems to optimize the surface conditioning procedure of copper electrodes, focusing on the effects of voltage recovery after breakdowns, variable repetition rates as well as long waiting times between pulsing runs. Despite the differences in the experimental scales, ranging from $10^{-4}$ s between pulses, up to pulsing breaks of $10^5$ s, the experiments show that the longer the idle time between the pulses, the more probable it is that the next pulse produces a breakdown. We also notice that secondary breakdowns, i.e. those which correlate with the previous ones, take place mainly during the voltage recovery stage. We link these events with deposition of residual atoms from vacuum on the electrode surfaces. Minimizing the number of pauses during the voltage recovery stage reduces power losses due to secondary breakdown events improving efficiency of the surface conditioning.

physics.ins-det↗

arXiv2020

Materials & Properties: Thermal & Electrical Characteristics

This lecture gives an introduction to the basic physics of the electrical conductivity of metals, its temperature dependence and its limiting factors. We will then introduce the concept of surface resistance, of high relevance in accelerators for its link with beam impedance and for RF applications, including notions related to the anomalous skin effect. The surface resistance will help establishing a link to heat exchanges between bodies by radiation, and to the concept of emissivity. Thermal conductivity will then be introduced, discussing both its electron and phonon exchange components, and the relevant limiting factors.

physics.acc-ph↗