SearcharxivSearch

arXiv subjects

Sergio G. Rodrigo

Publications and source records attributed to Sergio G. Rodrigo.

11 recordsLinked to original sources

Scattering correction for infrared spectra of biological cells using computational infrared microspectroscopy and deep learning

IR microspectroscopy of single biological cells is challenged by strong light scattering, which produces baseline effects and peak distortions in the IR spectra and hinders the direct extraction of chemical information. Current methods for scattering correction typically rely on Mie theory and are accurate only under the assumption that the cell can be approximated by a sphere. Here, we present a framework for the scattering correction of IR absorbance spectra that is based on 3D ellipsoid models and provides efficient scattering correction for both suspended (spherical) and adhered (flattened) cells. Our approach combines deep learning approaches with computational IR microspectroscopy based on the finite-difference time-domain (FDTD) method. The FDTD method generates a synthetic library of realistic training spectra, while the deep learning model enables fast spectral inversion. We demonstrate scattering correction in silico using numerical cell phantoms of cervical cancer cells (HeLa) and show that the true absorption spectra can be inferred from IR absorbance spectra. We further show that the 3D cell dimensions can be recovered from the IR absorbance spectra, highlighting that the inherent light scattering could be exploited to realize the full analytical potential of IR spectroscopy. We anticipate that deep learning-based scattering corrections can be readily extended to increasingly complex sample geometries owing to the flexibility of the FDTD method to model arbitrary geometries.

physics.optics

Learning finite symmetry groups of dynamical systems via equivariance detection

In this work, we introduce the Equivariance Seeker Model (ESM), a data-driven method for discovering the underlying finite equivariant symmetry group of an arbitrary function. ESM achieves this by optimizing a loss function that balances equivariance preservation with the penalization of redundant solutions, ensuring the complete and accurate identification of all symmetry transformations. We apply this framework specifically to dynamical systems, identifying their symmetry groups directly from observed trajectory data. To demonstrate its versatility, we test ESM on multiple systems in two distinct scenarios: (i) when the governing equations are known theoretically and (ii) when they are unknown, and the equivariance finding relies solely on observed data. The latter case highlights ESM's fully data-driven capability, as it requires no prior knowledge of the system's equations to operate.

physics.comp-ph

Finding discrete symmetry groups via Machine Learning

We introduce a machine-learning approach (denoted Symmetry Seeker Neural Network) capable of automatically discovering discrete symmetry groups in physical systems. This method identifies the finite set of parameter transformations that preserve the system's physical properties. Remarkably, the method accomplishes this without prior knowledge of the system's symmetry or the mathematical relationships between parameters and properties. Demonstrating its versatility, we showcase examples from mathematics, nanophotonics, and quantum chemistry.

physics.comp-ph

All-optical control of surface plasmons by second-harmonic generation

Light with light control of surface plasmon polaritons is theoretically demonstrated. A barely simple and compact source of these waves consists in a finite number of slits (evenly spaced) perforating a metal film. The system scatters electromagnetic fields in one side of the metal film when it is illuminated from the opposite side by a polarized light source. High intensity light sources moreover efficiently generate light at second harmonic and higher frequencies in the metal led by optical nonlinearities. It is shown how the mixing of fields scattered by the slits from a weak beam at $λ$ wavelength, with the second harmonic fields generated by a high intensity $2 λ$ beam, creates a destructive interference of surface plasmons in one of the two possible directions of emission from the slits, while these are enhanced along the opposite direction. The unidirectional launching of surface plasmons is due to the different properties of symmetry at $λ$ whether they are linearly or nonlinearly generated. It is envisaged a nanodevice which might allow sending digital information codified in the surface plasmon field or be used to build ultra-narrow bandwidth surface plasmon frequency combs.

physics.app-ph

Absorption-induced transparency metamaterials in the terahertz regime

Contrary to what might be expected, when an organic dye is sputtered onto an opaque holey metal film, transmission bands can be observed at the absorption energies of the molecules. This phenomenon, known as absorption-induced transparency, is aided by a strong modification of the propagation properties of light inside the holes when filled by the molecules. Despite having been initially observed in metallic structures in the optical regime, new routes for investigation and applications at different spectral regimes can be devised. Here, in order to illustrate the potential use of absorption induced transparency at terahertz, a method for molecular detection is presented, supported by a theoretical analysis.

cond-mat.mes-hall

Second harmonic generation from metallic arrays of rectangular holes

The generation process of second harmonic (SH) radiation from holes periodically arranged on a metal surface is investigated. Three main modulating factors affecting the optical response are identified: the near-field distribution at the wavelength of the fundamental harmonic, how SH light couples to the diffraction orders of the lattice, and its propagation properties inside the holes. It is shown that light generated at the second harmonic can excite electromagnetic modes otherwise inaccessible in the linear regime under normal incidence illumination. It is demonstrated that the emission of SH radiation is only allowed along off-normal paths precisely due to that symmetry. Two different regimes are studied in the context of extraordinary optical transmission, where enhanced linear transmission either occurs through localized electromagnetic modes or is aided by surface plasmon polaritons (SPPs). While localized resonances in metallic hole arrays have been previously investigated, the role played by SPPs in SH generation has not been addressed so far. In general, good agreement is found between our calculations (based on the finite difference time domain method) and the experimental results on localized resonances, even though no free fitting parameters were used in describing the materials. It is found that SH emission is strongly modulated by enhanced fields at the fundamental wavelength (either localized or surface plasmon modes) on the glass metal interface. This is so in the transmission side but also in reflection, where emission can only be explained by an efficient tunneling of SH photons through the holes from the output to the input side. Finally, the existence of a dark SPP at the fundamental field is identified through a noninvasive method for the first time, by analyzing the efficiency and far-field pattern distribution in transmission at the second harmonic.

cond-mat.mes-hall

Theory of Absorption Induced Transparency

Recent experiments (Angew. Chem. Int. Ed. 50, 2085 (2011)) have demonstrated that the optical transmission through an array of subwavelength holes in a metal film can be enhanced by the intentional presence of dyes in the system. As the transmission maxima occurs spectrally close to the absorption resonances of the dyes, this phenomenon was christened Absorption Induced Transparency. Here, a theoretical study on Absorption Induced Transparency is presented. The results show that the appearance of transmission maxima requires that the absorbent fills the holes and that it occurs also for single holes. Furthermore, it is shown that the transmission process is non-resonant, being composed by a sequential passage of the EM field through the hole. Finally, the physical origin of the phenomenon is demonstrated to be non-plasmonic, which implies that Absorption Induced Transparency should also occur at the infrared or Terahertz frequency regimes.

cond-mat.mes-hall

In the diffraction shadow: Norton waves versus surface plasmon-polaritons in the optical region

Surface electromagnetic modes supported by metal surfaces have a great potential for uses in miniaturised detectors and optical circuits. For many applications these modes are excited locally. In the optical regime, Surface Plasmon Polaritons (SPPs) have been thought to dominate the fields at the surface, beyond a transition region comprising 3-4 wavelengths from the source. In this work we demonstrate that at sufficiently long distances SPPs are not the main contribution to the field. Instead, for all metals, a different type of wave prevails, which we term Norton waves for their reminiscence to those found in the radio-wave regime at the surface of the Earth. Our results show that Norton Waves are stronger at the surface than SPPs at distances larger than 6-9 SPP's absorption lengths, the precise value depending on wavelength and metal. Moreover, Norton waves decay more slowly than SPPs in the direction normal to the surface.

cond-mat.mes-hall

Modulation of surface plasmon coupling-in by one-dimensional surface corrugation

Surface plasmon-polaritons have recently attracted renewed interest in the scientific community for their potential in sub-wavelength optics, light generation and non-destructive sensing. Given that they cannot be directly excited by freely propagating light due to their intrinsical binding to the metal surface, the light-plasmon coupling efficiency becomes of crucial importance for the success of any plasmonic device. Here we present a comprehensive study on the modulation (enhancement or suppression) of such coupling efficiency by means of one-dimensional surface corrugation. Our approach is based on simple wave interference and enables us to make quantitative predictions which have been experimentally confirmed at both the near infra-red and telecom ranges.

cond-mat.other

Efficient unidirectional nanoslit couplers for surface plasmons

Plasmonics is based on surface plasmon polariton (SPP) modes which can be laterally confined below the diffraction limit, thereby enabling ultracompact optical components. In order to exploit this potential, the fundamental bottleneck of poor light-SPP coupling must be overcome. In established SPP sources (using prism, grating} or nanodefect coupling) incident light is a source of noise for the SPP, unless the illumination occurs away from the region of interest, increasing the system size and weakening the SPP intensity. Back-side illumination of subwavelength apertures in optically thick metal films eliminates this problem but does not ensure a unique propagation direction for the SPP. We propose a novel back-side slit-illumination method based on drilling a periodic array of indentations at one side of the slit. We demonstrate that the SPP running in the array direction can be suppressed, and the one propagating in the opposite direction enhanced, providing localized unidirectional SPP launching.

cond-mat.other

Channel plasmon-polaritons: modal shape, dispersion, and losses

We theoretically study channel plasmon-polaritons (CPPs) with a geometry similar to that in recent experiments at telecom wavelengths (Bozhevolnyi et al., Nature 440, 508 (2006)). The CPP modal shape, dispersion relation, and losses are simulated using the multiple multipole method and the finite difference time domain technique. It is shown that, with the increase of the wavelength, the fundamental CPP mode shifts progressively towards the groove opening, ceasing to be guided at the groove bottom and becoming hybridized with wedge plasmon-polaritons running along the groove edges.

physics.optics