arXiv subjects

Sergiy Divinski

Publications and source records attributed to Sergiy Divinski.

7 recordsLinked to original sources

arXiv2026

Temperature dependence of the Gibbs energies of formation of point defects in B2 MoTa from ab initio calculations

Using B2 MoTa, the strongest B2 former among group V/VI refractory binaries, as a model system, we compute temperature-dependent Gibbs energies of formation of vacancies and antisites from ab initio calculations up to 3000 K at the stoichiometric composition. We explicitly account for thermal electronic excitations, vibrational anharmonicity, and electron-vibration coupling. The key finding is that the temperature dependence of the Gibbs energies of vacancy formation exhibits a pronounced sublattice asymmetry. Specifically, the Gibbs energy of formation of a Mo-site vacancy decreases by 1.1 eV from 0 to 3000 K, whereas the decrease for a Ta-site vacancy amounts to 2.1 eV, almost a factor of two larger. Two contributions of distinct origin govern the temperature dependence of this asymmetry: a quasiharmonic contribution associated with the chemical-potential imbalance set by the two antisite structures and an anharmonic contribution associated with the local vibrational response of the vacancy structures. The asymmetry in anharmonic vibrations is traced back to an enlarged local vibrational distribution of the first-nearest neighbors around the Ta-site vacancy. In contrast to the vacancies, the Gibbs energies of antisite formation vary only weakly with temperature.

cond-mat.mtrl-sci↗

arXiv2025

Microstructural Insights into Fast Ion Transport in Solid Electrolytes via Multiscale Modeling

Improving solid electrolytes is critical for high-performance all-solid-state batteries, yet the microstructural features that enable fast ion transport remain poorly understood. Here, we use multiscale modeling to resolve polycrystalline ion transport from atomic-scale hopping at grain boundaries to continuum-scale percolation, thereby providing insights into realistic solid-electrolyte microstructures. Accurate lightweight machine-learning potentials -- developed via closed-loop active learning for exemplar argyrodites Li$_6$PS$_5$X, X $\in$ {Cl, Br, I} -- are employed to integrate molecular dynamics with finite element simulations. We find that diffusion barriers of the anion-ordered bulk scale linearly with anion radius. Grain boundaries exert opposite effects depending on the bulk: enhancing ion diffusion in low-diffusivity phases but suppressing it in fast-diffusing ones. Li$_6$PS$_5$I exhibits non-Arrhenius transport behavior consistent with experimental observations. Our results clarify the pivotal role of grain boundaries in ion transport and guide a priori microstructural design of advanced solid electrolytes.

cond-mat.mtrl-sci↗

arXiv2024

Atomistic modeling of bulk and grain boundary diffusion in solid electrolyte Li$_6$PS$_5$Cl using machine-learning interatomic potentials

Li$_6$PS$_5$Cl is a promising candidate for the solid electrolyte in all-solid-state Li-ion batteries. In applications, this material is in a polycrystalline state with grain boundaries (GBs) that can affect ionic conductivity. While atomistic modeling provides valuable information on the impact of GBs on Li diffusion, such studies face either high computational cost (\textit{ab initio} methods) or accuracy limitations (classical potentials) as challenges. Here, we develop a quality-level-based active learning scheme for efficient and systematic development of \textit{ab initio}-based machine-learning interatomic potentials, specifically moment tensor potentials (MTPs), for large-scale, long-time, and high-accuracy simulations of complex atomic structures and diffusion mechanisms as encountered in solid electrolytes. Based on this scheme, we obtain MTPs for Li$_6$PS$_5$Cl and investigate two tilt GBs, $\Sigma3(1\bar{1}2)[110]$, $\Sigma3(\bar{1}11)[110]$, and one twist GB, $\Sigma5(001)[001]$. All three GBs exhibit low formation energies of less than \SI{20}{meV/\angstrom\textsuperscript{2}}, indicating their high stability in polycrystalline Li$_6$PS$_5$Cl. Using the MTPs, diffusion coefficients of the anion-ordered and anion-disordered bulk, as well as the three GBs, are obtained from molecular dynamics simulations of atomistic models. At \SI{300}{\kelvin}, the GB diffusion coefficients fall between the ones of the anion-ordered bulk structure (\SI{0.012e-7}{cm^2/s}, corresponding ionic conductivity about \SI{0.2}{mS/cm}) and the anion-disordered bulk structure (\SI{50}{\percent} Cl/S-anion disorder; \SI{2.203e-7}{cm^2/s}, about \SI{29.8}{mS/cm}) of Li$_6$PS$_5$Cl. Experimental data fall between the Arrhenius-extrapolated diffusion coefficients of the investigated atomic structures.

cond-mat.mtrl-sci↗

arXiv2019

Grain boundary diffusion and grain boundary structures of a Ni-Cr-Fe-alloy: Evidences for grain boundary phase transformations

Grain boundary tracer diffusion of Ni, Fe and Cr was studied in a Ni-base 602CA coarse-grained alloy. A co-existence of several short-circuit contributions was distinguished at higher temperatures in Harrison's B-type regime (773-873 K), which were related to different families of high-angle grain boundaries with distinct coverages by precipitates and segregation levels as revealed by HAADF-STEM combined with EDX measurements. Annealing at 873 K for 18 hours resulted in Cr23C6-type carbides coexisting with an α-Cr-Mn-enriched phase in addition to sequential segregation layers of Al, Fe and Ni around them. Curved and hackly grain boundaries showed a high density of plate-like carbides, whereas straight grain boundaries were composed of globular carbides with similar chemical composition variations and additionally with alternating layers of Cr and Ni in between the carbides, similar to microstructures after a spinodal decomposition. At lower temperatures, discontinuous interfaces with Cr and Cr-carbide enrichment dominated and the alloy annealed at 403 K for 72 hours contained plate-like Cr23C6-type carbides surrounded by a Ni-rich layer around them. The Ni grain boundary diffusion rates at these relatively low temperatures (formally belonging to C-type kinetics) showed an anomalous character being almost temperature independent. This specific diffusion behaviour was explained by a concomitant relaxation of transformation-induced elastic strains occurring on a longer time scale with respect to grain boundary diffusion. Thermodynamic insights into the probable mechanism of decomposition at grain boundaries are provided.

cond-mat.mtrl-sci↗

arXiv2018

Concentration-dependent atomic mobilities in FCC CoCrFeMnNi high-entropy alloys

The diffusion kinetics in a CoCrFeMnNi high entropy alloy is investigated by a combined radiotracer--interdiffusion experiment applied to a pseudo-binary Co$_{15}$Cr$_{20}$Fe$_{20}$Mn$_{20}$Ni$_{25}$ / Co$_{25}$Cr$_{20}$Fe$_{20}$Mn$_{20}$Ni$_{15}$ couple. As a result, the composition-dependent tracer diffusion coefficients of Co, Cr, Fe and Mn are determined. The elements are characterized by significantly different diffusion rates, with Mn being the fastest element and Co being the slowest one. The elements having originally equiatomic concentration through the diffusion couple are found to reveal up-hill diffusion, especially Cr and Mn. The atomic mobility of Co seems to follow an S-shaped concentration dependence along the diffusion path. The experimentally measured kinetic data are checked against the existing CALPHAD-type databases. In order to ensure a consistent treatment of tracer and chemical diffusion a generalized symmetrized continuum approach for multi-component interdiffusion is proposed. Both, tracer and chemical diffusion concentration profiles are simulated and compared to the measurements. By using the measured tracer diffusion coefficients the chemical profiles can be described, almost perfectly, including up-hill diffusion.

cond-mat.mtrl-sci↗

arXiv2017

Computational engineering of sublattice ordering in a hexagonal AlHfScTiZr high entropy alloy

Multi-principle element alloys have enormous potential, but their exploration suffers from the tremendously large range of configurations. In the last decade such alloys have been designed with a focus on random solid solutions. Here we apply an experimentally verified, combined thermodynamic and first-principles design strategy to reverse the traditional approach and to generate a new type of hcp Al-Hf-Sc-Ti-Zr high entropy alloy with a hitherto unique structure. A phase diagram analysis narrows down the large compositional space to a well-defined set of candidates. First-principles calculations demonstrate the energetic preference of an ordered superstructure over the competing disordered solid solutions. The chief ingredient is the Al concentration, which can be tuned to achieve a D019 ordering of the hexagonal lattice. The computationally designed D019 superstructure is experimentally confirmed by transmission electron microscopy and X-ray studies. Our scheme enables the exploration of a new class of high entropy alloys.

cond-mat.mtrl-sci↗

arXiv2012

Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena

Grain boundaries in ultrafine grained (UFG) materials processed by severe plastic deformation (SPD) are often called "non-equilibrium" grain boundaries. Such boundaries are characterized by excess grain boundary energy, presence of long range elastic stresses and enhanced free volumes. These features and related phenomena (diffusion, segregation, etc.) have been the object of intense studies and the obtained results provide convincing evidence of the importance of a non-equilibrium state of high angle grain boundaries for UFG materials with unusual properties. The aims of the present paper are first to give a short overview of this research field and then to consider tangled, yet unclear issues and outline the ways of oncoming studies. A special emphasis is given on the specific structure of grain boundaries in ultrafine grained materials processed by SPD, on grain boundary segregation, on interfacial mixing linked to heterophase boundaries and on grain boundary diffusion. The connection between these unique features and the mechanical properties or the thermal stability of the ultrafine grained alloys is also discussed.

cond-mat.mtrl-sci↗