arXiv subjects

Seth Aubin

Publications and source records attributed to Seth Aubin.

12 recordsLinked to original sources

arXiv2026

Static dc electric field orientation effects on two-photon Rydberg EIT

We examine the influence of a static dc electric field on Electromagnetically Induced Transparency (EIT) resonances that involve highly excited Rydberg states. Our focus is on how these resonances are altered when the relative orientation between the laser polarization and the external electric field vectors are varied. We experimentally demonstrate characteristic variations in the amplitude of the Stark-split EIT resonances, which can be explained by the selection rules in various geometries. We also present a simplified semi-analytical model that closely resembles the experimental observations. We use these findings to obtain information about the spatially inhomogeneous electric field, produced by a biased wire, using EIT fluorescence measurements that agrees with the expected angular dependencies. These results suggest that simultaneous analysis of frequency shifts and amplitudes of Rydberg EIT resonances may enable vector electrometry of electrostatic fields, necessary for many quantum sensing applications.

physics.atom-ph↗

arXiv2026

Electron Beam Profiling via Rydberg Electromagnetically Induced Transparency in Rubidium Vapor with Crossed Laser beams

We present an all-optical detection approach to determine the position and spatial profile of an electron beam based on quantum properties of alkali metal atoms. To measure the electric field, produced by an electron beam, we excite thermal rubidium atoms to a highly excited Rydberg state via a two-photon ladder transition and detect Stark shifts of Rydberg states by monitoring frequencies of the corresponding electromagnetically induced transparency (EIT) transmission peaks. We addressed several technical challenges in this approach. First, we use crossed laser beams to obtain spatial information about the electron beam position and geometry. Second, by pulsing the electron beam and using phase-sensitive optical detection, we separate the true electron beam electric signature from the parasitic electric fields due to photoelectric charges on the windows. Finally, we use a principle component analysis to further improve signal quality. We test this method to detect the current and to reconstruct a 2D profile of a 20 keV electron beam with currents ranging from 25 - 100 uA. While this technique provides less spatial resolution than fluorescence-based measurements, thanks to their speed and limited optical access requirements it can be useful for real-time non-invasive diagnostics of charged particle beams at accelerator facilities.

physics.atom-ph↗

arXiv2025

Non-perturbative 2D spatial measurements of electric fields within a plasma sheath

We introduce an all-optical quantum-enhanced diagnostic for electric fields in low-temperature plasmas. Trace amounts of rubidium vapor, added to argon plasma, allow us to produce spectrally narrow electric field-sensitive optical resonances via quantum optical effect of Rydberg electromagnetically induced transparency, and to non-invasively measure electric field in plasma with sensitivity exceeding 1 V/cm. By collecting fluorescence from the illuminated region of interest, we reconstruct a 2D spatial profile of the electric field magnitude with $30~\mu$m resolution. As a proof-of-principle demonstration, we measured the changes in electric field within the plasma sheath surrounding a biased Langmuir probe tip. This method holds significant potential for studying sheath structures in low-temperature plasmas.

physics.plasm-ph↗

arXiv2025

Electron beam characterization via fluorescence imaging of Rydberg states in atomic vapor

We demonstrate an all-optical, minimally invasive method for electron beam (e-beam) characterization using Rydberg electrometry. The e-beam passes through a dilute Rb vapor prepared in a quantum superposition of ground and Rydberg states that reduces resonant absorption in a narrow spectral region. Imaging the modifications of Rb fluorescence due to shifts in the Rydberg state from the e-beam electric field allows us to reconstruct e-beam width, centroid position, and current. We experimentally demonstrate this technique using a 20 keV e-beam in the range of currents down to 20 $\mu$A, and discuss technical challenges produced by environmental electric potentials in the detection chamber. Overall, we demonstrate the promising potential of such an approach as a minimally invasive diagnostic for charged particle beams.

physics.atom-ph↗

arXiv2024

Two-dimensional imaging of electromagnetic fields via light sheet fluorescence imaging with Rydberg atoms

The ability to image electromagnetic fields holds key scientific and industrial applications, including electromagnetic compatibility, diagnostics of high-frequency devices, and experimental scientific work involving field interactions. Generally electric and magnetic field measurements require conductive elements which significantly distort the field. However, electromagnetic fields can be measured without altering the field via the shift they induce on Rydberg states of alkali atoms in atomic vapor, which are highly sensitive to electric fields. Previous field measurements using Rydberg atoms utilized electromagnetically induced transparency to read out the shift on the states induced by the fields, but did not provide spatial resolution. In this work, we demonstrate that electromagnetically induced transparency can be spatially resolved by imaging the fluorescence of the atoms. We demonstrate that this can be used to image $\sim$ V/cm scale electric fields in the DC-GHz range and $\sim$ mT scale static magnetic fields, with minimal distortion to the fields. We also demonstrate the ability to image $\sim$ 5 mV/cm scale fields for resonant microwave radiation and measure standing waves generated by the partial reflection of the vapor cell walls in this regime. With additional processing techniques like lock-in detection, we predict that our sensitivities could reach down to nV/cm levels. We perform this field imaging with a spatial resolution of 160 $\mu$m, limited by our imaging system, and estimate the fundamental resolution limitation to be 5 $\mu$m.

physics.atom-ph↗

arXiv2024

Electron Beam Characterization via Quantum Coherent Optical Magnetometry

We present a quantum optics-based detection method for determining the position and current of an electron beam. As electrons pass through a dilute vapor of rubidium atoms, their magnetic field perturb the atomic spin's quantum state and causes polarization rotation of a laser resonant with an optical transition of the atoms. By measuring the polarization rotation angle across the laser beam, we recreate a 2D projection of the magnetic field and use it to determine the e-beam position, size and total current. We tested this method for an e-beam with currents ranging from 30 to 110 {\mu}A. Our approach is insensitive to electron kinetic energy, and we confirmed that experimentally between 10 to 20 keV. This technique offers a unique platform for non-invasive characterization of charged particle beams used in accelerators for particle and nuclear physics research.

quant-ph↗

arXiv2015

Matter, Energy, and Heat Transfer in a Classical Ballistic Atom Pump

A ballistic atom pump is a system containing two reservoirs of neutral atoms or molecules and a junction connecting them containing a localized time-varying potential. Atoms move through the pump as independent particles. Under certain conditions, these pumps can create net transport of atoms from one reservoir to the other. While such systems are sometimes called "quantum pumps," they are also models of classical chaotic transport, and their quantum behavior cannot be understood without study of the corresponding classical behavior. Here we examine classically such a pump's effect on energy and temperature in the reservoirs, in addition to net particle transport. We show that the changes in particle number, of energy in each reservoir, and of temperature in each reservoir vary in unexpected ways as the incident particle energy is varied.

cond-mat.quant-gas↗

arXiv2015

Ballistic atom pumps

We examine a classically-chaotic system consisting of two reservoirs of particles connected by a channel containing oscillating potential-energy barriers. We investigate whether such a system can preferentially pump particles from one reservoir to the other, a process often called "quantum pumping." We show how to make a "particle diode" which under specified conditions permits net particle pumping in only one direction. Then we examine systems having symmetric barriers. We find that if all initial particle energies are considered, a system with symmetric barriers cannot preferentially pump particles. However, if only finite initial energy bands are considered, the system can create net particle transport in either direction. We study the system classically, semiclassically, and quantum mechanically, and find that the quantum description cannot be fully understood without the insight gained from classical and semiclassical analysis.

cond-mat.quant-gas↗

arXiv2012

Scattering by an oscillating barrier: quantum, classical, and semiclassical comparison

We present a detailed study of scattering by an amplitude-modulated potential barrier using three distinct physical frameworks: quantum, classical, and semiclassical. Classical physics gives bounds on the energy and momentum of the scattered particle, while also providing the foundation for semiclassical theory. We use the semiclassical approach to selectively add quantum-mechanical effects such as interference and diffraction. We find good agreement between the quantum and semiclassical momentum distributions. Our methods and results can be used to understand quantum and classical aspects of transport mechanisms involving time-varying potentials, such as quantum pumping.

cond-mat.quant-gas↗

arXiv2011

Fermions on atom chips

We review our recent and ongoing work with Fermi gases on an atom chip. After reviewing some statistical and thermodynamic properties of the ideal, non-interacting Fermi gas, and a brief description of our atom chip and its capabilities, we discuss our experimental approach to producing a potassium-40 degenerate Fermi gas (DFG) using sympathetic cooling by a rubidium-87 Bose-Einstein condensate on an atom chip. In doing so, we describe the factors affecting the loading efficiency of the atom chip microtrap. This is followed by a discussion of species selectivity in radio frequency manipulation of the Bose-Fermi mixture, which we explore in the context of sympathetic evaporative cooling and radio-frequency dressed adiabatic double-well potentials. Next, we describe the incorporation of a crossed-beam dipole trap into the atom chip setup, in which we generate and manipulate strongly interacting spin mixtures of potassium-40. Finally, we conclude with a brief discussion of future research directions with DFGs and atom chips.

quant-ph↗

arXiv2009

Quantum Pumping with Ultracold Atoms on Microchips: Fermions versus Bosons

We present a design for simulating quantum pumping of electrons in a mesoscopic circuit with ultra-cold atoms in a micro-magnetic chip trap. We calculate theoretical results for quantum pumping of both bosons and fermions, identifying differences and common features, including geometric behavior and resonance transmission. We analyze the feasibility of experiments with bosonic $^{87}$Rb and fermionic $^{40}$K atoms with an emphasis on reliable atomic current measurements.

cond-mat.quant-gas↗

arXiv1999

Surface Phonons and Other Localized Excitations

The diatomic linear chain of masses coupled by harmonic springs is a textboook model for vibrational normal modes (phonons) in crystals. In addition to propagating acoustic and optic branches, this model is known to support a ``gap mode'' localized at the surface, provided the atom at the surface has light rather than heavy mass. An elementary argument is given which explains this mode and provides values for the frequency and localization length. By reinterpreting this mode in different ways, we obtain the frequency and localization lengths for three other interesting modes: (1) the surface vibrational mode of a light mass impurity at the surface of a monatomic chain; (2) the localized vibrational mode of a stacking fault in a diatomic chain; and (3) the localized vibrational mode of a light mass impurity in a monatomic chain.

cond-mat↗