arXiv subjects

Severin Diederichs

Publications and source records attributed to Severin Diederichs.

7 recordsLinked to original sources

arXiv2026

Gridless Quasistatic Model for Efficient Simulation of Plasma-based Accelerators

The accurate modeling of plasma-based accelerators relies on costly numerical simulations due to the complexity of laser-plasma and beam-plasma interactions. Several strategies can highly reduce the computational cost compared to 3D first-principles particle-in-cell simulations, such as exploiting the near axial symmetry and quasistatic nature of plasma wakefields in many practical cases. Here, we propose a quasistatic algorithm that enables the modeling of axially symmetric plasma wakes without the need of a numerical grid. The gridless approach allows extremely fine features to be resolved without a dramatic increase in computational cost. This is critical, e.g., for the design of future plasma-based colliders with nanometer emittance beams. The proposed model has been implemented in the Wake-T code, where it is coupled to a laser envelope solver and a particle beam pusher to enable the efficient simulation of laser- and beam-driven plasma accelerators.

physics.plasm-ph↗

arXiv2024

Resonant emittance mixing of flat beams in plasma accelerators

Linear colliders rely on high-quality flat beams to achieve the desired event rate, while avoiding potentially deleterious beamstrahlung effects. Here, we show that flat beams in plasma accelerators can be subject to quality degradation due to emittance mixing. This effect occurs when the beam particles' betatron oscillations in a nonlinearly coupled wakefield become resonant in the horizontal and vertical planes. Emittance mixing can lead to a substantial decrease of the luminosity, the main quantity determining the event rate. In some cases, the use of laser drivers or flat particle beam drivers may decrease the fraction of resonant particles and, hence, mitigate emittance deterioration.

physics.acc-ph↗

arXiv2023

Energy recovery in filament-regime plasma wakefield acceleration of positron beams

Plasma wakefield acceleration using an electron filament offers stable, high-gradient, high-quality acceleration of positron beams analogous to the acceleration of electrons in the blowout regime. However, low energy-transfer efficiency is currently a limiting factor for future collider applications. We explore the addition of a secondary electron bunch in the electron filament plasma wakefield acceleration scheme to recover additional energy from the wake. Particle-in-cell simulations using HiPACE++ are used to demonstrate various energy recovery schemes. In addition to confirming the energy efficiency gains with a recovery electron beam, we also develop energy recovery schemes in the context of future plasma colliders.

physics.acc-ph↗

arXiv2023

Emittance-preserving acceleration of high-quality positron beams using warm plasma filaments

Preserving the quality of positron beams in plasma-based accelerators, where wakefields are generated in electron filaments, is challenging. These wakefields are characterized by transversely non-linear focusing fields and non-uniform accelerating fields. However, a nonzero plasma temperature linearizes the transverse wakefield within the central region of the electron filament. In this study, we employ 3D particle-in-cell simulations with mesh refinement to demonstrate that beams with emittances on the order of tens of nanometers are contained within the linearized region of the transverse wakefield. This enables emittance preservation to one percent, while positron beams with the same charge and micrometer emittances, which sample the non-linear part of the transverse wakefield, experience a relative emittance growth of ten percent. Additionally, we observe a significant reduction in the growth rate of the slice energy spread for the tens of nanometers emittance beams in comparison to the micrometer emittance beams. The utilization of warm plasmas in conjunction with low-emittance beams opens up new avenues for enhancing the beam quality across various plasma-based positron acceleration approaches.

physics.acc-ph↗

arXiv2023

From Compact Plasma Particle Sources to Advanced Accelerators with Modeling at Exascale

Developing complex, reliable advanced accelerators requires a coordinated, extensible, and comprehensive approach in modeling, from source to the end of beam lifetime. We present highlights in Exascale Computing to scale accelerator modeling software to the requirements set for contemporary science drivers. In particular, we present the first laser-plasma modeling on an exaflop supercomputer using the US DOE Exascale Computing Project WarpX. Leveraging developments for Exascale, the new DOE SCIDAC-5 Consortium for Advanced Modeling of Particle Accelerators (CAMPA) will advance numerical algorithms and accelerate community modeling codes in a cohesive manner: from beam source, over energy boost, transport, injection, storage, to application or interaction. Such start-to-end modeling will enable the exploration of hybrid accelerators, with conventional and advanced elements, as the next step for advanced accelerator modeling. Following open community standards, we seed an open ecosystem of codes that can be readily combined with each other and machine learning frameworks. These will cover ultrafast to ultraprecise modeling for future hybrid accelerator design, even enabling virtual test stands and twins of accelerators that can be used in operations.

physics.acc-ph↗

arXiv2021

HiPACE++: a portable, 3D quasi-static Particle-in-Cell code

Modeling plasma accelerators is a computationally challenging task and the quasi-static particle-in-cell algorithm is a method of choice in a wide range of situations. In this work, we present the first performance-portable, quasi-static, three-dimensional particle-in-cell code HiPACE++. By decomposing all the computation of a 3D domain in successive 2D transverse operations and choosing appropriate memory management, HiPACE++ demonstrates orders-of-magnitude speedups on modern scientific GPUs over CPU-only implementations. The 2D transverse operations are performed on a single GPU, avoiding time-consuming communications. The longitudinal parallelization is done through temporal domain decomposition, enabling near-optimal strong scaling from 1 to 512 GPUs. HiPACE++ is a modular, open-source code enabling efficient modeling of plasma accelerators from laptops to state-of-the-art supercomputers.

physics.comp-ph↗

arXiv2020

Controlled density-downramp injection in a beam-driven plasma wakefield accelerator

This paper describes the utilization of beam-driven plasma wakefield acceleration to implement a high-quality plasma cathode via density-downramp injection in a short injector stage at the FLASHForward facility at DESY. Electron beams with charge of up to 105 pC and energy spread of a few percent were accelerated by a tunable effective accelerating field of up to 2.7 GV/m. The plasma cathode was operated drift-free with very high injection efficiency. Sources of jitter, the emittance and divergence of the resulting beam were investigated and modeled, as were strategies for performance improvements that would further increase the wide-ranging applications for a plasma cathode with the demonstrated operational stability

physics.acc-ph↗