arXiv subjects

Seyyed Ali Hashemi

Publications and source records attributed to Seyyed Ali Hashemi.

28 records · Page 2Linked to original sources

arXiv2018

Decoding Reed-Muller and Polar Codes by Successive Factor Graph Permutations

Reed-Muller (RM) and polar codes are a class of capacity-achieving channel coding schemes with the same factor graph representation. Low-complexity decoding algorithms fall short in providing a good error-correction performance for RM and polar codes. Using the symmetric group of RM and polar codes, the specific decoding algorithm can be carried out on multiple permutations of the factor graph to boost the error-correction performance. However, this approach results in high decoding complexity. In this paper, we first derive the total number of factor graph permutations on which the decoding can be performed. We further propose a successive permutation (SP) scheme which finds the permutations on the fly, thus the decoding always progresses on a single factor graph permutation. We show that SP can be used to improve the error-correction performance of RM and polar codes under successive-cancellation (SC) and SC list (SCL) decoding, while keeping the memory requirements of the decoders unaltered. Our results for RM and polar codes of length $128$ and rate $0.5$ show that when SP is used and at a target frame error rate of $10^{-4}$, up to $0.5$ dB and $0.1$ dB improvement can be achieved for RM and polar codes respectively.

cs.IT↗

arXiv2018

On the Decoding of Polar Codes on Permuted Factor Graphs

Polar codes are a channel coding scheme for the next generation of wireless communications standard (5G). The belief propagation (BP) decoder allows for parallel decoding of polar codes, making it suitable for high throughput applications. However, the error-correction performance of polar codes under BP decoding is far from the requirements of 5G. It has been shown that the error-correction performance of BP can be improved if the decoding is performed on multiple permuted factor graphs of polar codes. However, a different BP decoding scheduling is required for each factor graph permutation which results in the design of a different decoder for each permutation. Moreover, the selection of the different factor graph permutations is at random, which prevents the decoder to achieve a desirable error-correction performance with a small number of permutations. In this paper, we first show that the permutations on the factor graph can be mapped into suitable permutations on the codeword positions. As a result, we can make use of a single decoder for all the permutations. In addition, we introduce a method to construct a set of predetermined permutations which can provide the correct codeword if the decoding fails on the original permutation. We show that for the 5G polar code of length $1024$, the error-correction performance of the proposed decoder is more than $0.25$ dB better than that of the BP decoder with the same number of random permutations at the frame error rate of $10^{-4}$.

cs.IT↗

arXiv2018

Design and Implementation of a Polar Codes Blind Detection Scheme

In blind detection, a set of candidates has to be decoded within a strict time constraint, to identify which transmissions are directed at the user equipment. Blind detection is required by the 3GPP LTE/LTE-Advanced standard, and it will be required in the 5th generation wireless communication standard (5G) as well. Polar codes have been selected for use in 5G: thus, the issue of blind detection of polar codes must be addressed. We propose a polar code blind detection scheme where the user ID is transmitted instead of some of the frozen bits. A first, coarse decoding phase helps selecting a subset of candidates that is decoded by a more powerful algorithm: an early stopping criterion is also introduced for the second decoding phase. Simulations results show good missed detection and false alarm rates, along with substantial latency gains thanks to early stopping. We then propose an architecture to implement the devised blind detection scheme, based on a tunable decoder that can be used for both phases. The architecture is synthesized and implementation results are reported for various system parameters. The reported area occupation and latency, obtained in 65 nm CMOS technology, are able to meet 5G requirements, and are guaranteed to meet them with even less resource usage in the latest technology nodes.

cs.IT↗

arXiv2017

On Error-Correction Performance and Implementation of Polar Code List Decoders for 5G

Polar codes are a class of capacity achieving error correcting codes that has been recently selected for the next generation of wireless communication standards (5G). Polar code decoding algorithms have evolved in various directions, striking different balances between error-correction performance, speed and complexity. Successive-cancellation list (SCL) and its incarnations constitute a powerful, well-studied set of algorithms, in constant improvement. At the same time, different implementation approaches provide a wide range of area occupations and latency results. 5G puts a focus on improved error-correction performance, high throughput and low power consumption: a comprehensive study considering all these metrics is currently lacking in literature. In this work, we evaluate SCL-based decoding algorithms in terms of error-correction performance and compare them to low-density parity-check (LDPC) codes. Moreover, we consider various decoder implementations, for both polar and LDPC codes, and compare their area occupation and power and energy consumption when targeting short code lengths and rates. Our work shows that among SCL-based decoders, the partitioned SCL (PSCL) provides the lowest area occupation and power consumption, whereas fast simplified SCL (Fast-SSCL) yields the lowest energy consumption. Compared to LDPC decoder architectures, different SCL implementations occupy up to 17.1x less area, dissipate up to 7.35x less power, and up to 26x less energy.

cs.IT↗

arXiv2017

Partitioned List Decoding of Polar Codes: Analysis and Improvement of Finite Length Performance

Polar codes represent one of the major recent breakthroughs in coding theory and, because of their attractive features, they have been selected for the incoming 5G standard. As such, a lot of attention has been devoted to the development of decoding algorithms with good error performance and efficient hardware implementation. One of the leading candidates in this regard is represented by successive-cancellation list (SCL) decoding. However, its hardware implementation requires a large amount of memory. Recently, a partitioned SCL (PSCL) decoder has been proposed to significantly reduce the memory consumption. In this paper, we examine the paradigm of PSCL decoding from both theoretical and practical standpoints: (i) by changing the construction of the code, we are able to improve the performance at no additional computational, latency or memory cost, (ii) we present an optimal scheme to allocate cyclic redundancy checks (CRCs), and (iii) we provide an upper bound on the list size that allows MAP performance.

cs.IT↗

arXiv2017

Fast and Flexible Successive-Cancellation List Decoders for Polar Codes

Polar codes have gained significant amount of attention during the past few years and have been selected as a coding scheme for the next generation of mobile broadband standard. Among decoding schemes, successive-cancellation list (SCL) decoding provides a reasonable trade-off between the error-correction performance and hardware implementation complexity when used to decode polar codes, at the cost of limited throughput. The simplified SCL (SSCL) and its extension SSCL-SPC increase the speed of decoding by removing redundant calculations when encountering particular information and frozen bit patterns (rate one and single parity check codes), while keeping the error-correction performance unaltered. In this paper, we improve SSCL and SSCL-SPC by proving that the list size imposes a specific number of bit estimations required to decode rate one and single parity check codes. Thus, the number of estimations can be limited while guaranteeing exactly the same error-correction performance as if all bits of the code were estimated. We call the new decoding algorithms Fast-SSCL and Fast-SSCL-SPC. Moreover, we show that the number of bit estimations in a practical application can be tuned to achieve desirable speed, while keeping the error-correction performance almost unchanged. Hardware architectures implementing both algorithms are then described and implemented: it is shown that our design can achieve 1.86 Gb/s throughput, higher than the best state-of-the-art decoders.

cs.IT↗

arXiv2017

Blind Detection with Polar Codes

In blind detection, a set of candidates has to be decoded within a strict time constraint, to identify which transmissions are directed at the user equipment. Blind detection is an operation required by the 3GPP LTE/LTE-Advanced standard, and it will be required in the 5th generation wireless communication standard (5G) as well. We propose a blind detection scheme based on polar codes, where the radio network temporary identifier (RNTI) is transmitted instead of some of the frozen bits. A low-complexity decoding stage decodes all candidates, selecting a subset that is decoded by a high-performance algorithm. Simulations results show good missed detection and false alarm rates, that meet the system specifications. We also propose an early stopping criterion for the second decoding stage that can reduce the number of operations performed, improving both average latency and energy consumption. The detection speed is analyzed and different system parameter combinations are shown to meet the stringent timing requirements, leading to various implementation trade-offs.

cs.IT↗

arXiv2017

Efficient Bit-Channel Reliability Computation for Multi-Mode Polar Code Encoders and Decoders

Polar codes are a family of capacity-achieving error-correcting codes, and they have been selected as part of the next generation wireless communication standard. Each polar code bit-channel is assigned a reliability value, used to determine which bits transmit information and which parity. Relative reliabilities need to be known by both encoders and decoders: in case of multi-mode systems, where multiple code lengths and code rates are supported, the storage of relative reliabilities can lead to high implementation complexity. In this work, observe patterns among code reliabilities. We propose an approximate computation technique to easily represent the reliabilities of multiple codes, through a limited set of variables and update rules. The proposed method allows to tune the trade-off between reliability accuracy and implementation complexity. An approximate computation architecture for encoders and decoders is designed and implemented, showing 50.7% less area occupation than storage-based solutions, with less than 0.05 dB error correction performance degradation.

cs.IT↗

arXiv2017

Fast Simplified Successive-Cancellation List Decoding of Polar Codes

Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time-steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.

cs.IT↗

arXiv2016

Partitioned Successive-Cancellation List Decoding of Polar Codes

Successive-cancellation list (SCL) decoding is an algorithm that provides very good error-correction performance for polar codes. However, its hardware implementation requires a large amount of memory, mainly to store intermediate results. In this paper, a partitioned SCL algorithm is proposed to reduce the large memory requirements of the conventional SCL algorithm. The decoder tree is broken into partitions that are decoded separately. We show that with careful selection of list sizes and number of partitions, the proposed algorithm can outperform conventional SCL while requiring less memory.

cs.AR↗