arXiv subjects

Shahid Mumtaz

Publications and source records attributed to Shahid Mumtaz.

At least 37 records · Page 2Linked to original sources

arXiv2023

Technology Trends for Massive MIMO towards 6G

At the dawn of the next-generation wireless systems and networks, massive multiple-input multiple-output (MIMO) has been envisioned as one of the enabling technologies. With the continued success of being applied in the 5G and beyond, the massive MIMO technology has demonstrated its advantageousness, integrability, and extendibility. Moreover, several evolutionary features and revolutionizing trends for massive MIMO have gradually emerged in recent years, which are expected to reshape the future 6G wireless systems and networks. Specifically, the functions and performance of future massive MIMO systems will be enabled and enhanced via combining other innovative technologies, architectures, and strategies such as intelligent omni-surfaces (IOSs)/intelligent reflecting surfaces (IRSs), artificial intelligence (AI), THz communications, cell free architecture. Also, more diverse vertical applications based on massive MIMO will emerge and prosper, such as wireless localization and sensing, vehicular communications, non-terrestrial communications, remote sensing, inter-planetary communications.

cs.IT↗

arXiv2022

Secure Performance Analysis of RIS-aided Wireless Communication Systems

Since Internet of Things (IoT) is suggested as the fundamental platform to adapt massive connections and secure transmission, we study physical-layer authentication in the point-to-point wireless systems relying on reconfigurable intelligent surfaces (RIS) technique. Due to lack of direct link from IoT devices (both legal and illegal devices) to the access point, we benefit from RIS by considering two main secure performance metrics. As main goal, we examine the secrecy performance of a RIS-aided wireless communication systems which show secure performance in the presence of an eavesdropping IoT devices. In this circumstance, RIS is placed between the access point and the legitimate devices and is designed to enhance the link security. To specify secure system performance metrics, we firstly present analytical results for the secrecy outage probability. Then, secrecy rate is further examined. Interestingly, we are to control both the average signal-to-noise ratio at the source and the number of metasurface elements of the RIS to achieve improved system performance. We verify derived expressions by matching Monte-Carlo simulation and analytical results.

eess.SP↗

arXiv2022

Statistical QoS Analysis of Reconfigurable Intelligent Surface-assisted D2D Communication

This work performs the statistical QoS analysis of a Rician block-fading reconfigurable intelligent surface (RIS)-assisted D2D link in which the transmit node operates under delay QoS constraints. First, we perform mode selection for the D2D link, in which the D2D pair can either communicate directly by relaying data from RISs or through a base station (BS). Next, we provide closed-form expressions for the effective capacity (EC) of the RIS-assisted D2D link. When channel state information at the transmitter (CSIT) is available, the transmit D2D node communicates with the variable rate $r_t(n)$ (adjustable according to the channel conditions); otherwise, it uses a fixed rate $r_t$. It allows us to model the RIS-assisted D2D link as a Markov system in both cases. We also extend our analysis to overlay and underlay D2D settings. To improve the throughput of the RIS-assisted D2D link when CSIT is unknown, we use the HARQ retransmission scheme and provide the EC analysis of the HARQ-enabled RIS-assisted D2D link. Finally, simulation results demonstrate that: i) the EC increases with an increase in RIS elements, ii) the EC decreases when strict QoS constraints are imposed at the transmit node, iii) the EC decreases with an increase in the variance of the path loss estimation error, iv) the EC increases with an increase in the probability of ON states, v) EC increases by using HARQ when CSIT is unknown, and it can reach up to $5\times$ the usual EC (with no HARQ and without CSIT) by using the optimal number of retransmissions.

cs.IT↗

arXiv2022

Two-timescale Resource Allocation for Automated Networks in IIoT

The rapid technological advances of cellular technologies will revolutionize network automation in industrial internet of things (IIoT). In this paper, we investigate the two-timescale resource allocation problem in IIoT networks with hybrid energy supply, where temporal variations of energy harvesting (EH), electricity price, channel state, and data arrival exhibit different granularity. The formulated problem consists of energy management at a large timescale, as well as rate control, channel selection, and power allocation at a small timescale. To address this challenge, we develop an online solution to guarantee bounded performance deviation with only causal information. Specifically, Lyapunov optimization is leveraged to transform the long-term stochastic optimization problem into a series of short-term deterministic optimization problems. Then, a low-complexity rate control algorithm is developed based on alternating direction method of multipliers (ADMM), which accelerates the convergence speed via the decomposition-coordination approach. Next, the joint channel selection and power allocation problem is transformed into a one-to-many matching problem, and solved by the proposed price-based matching with quota restriction. Finally, the proposed algorithm is verified through simulations under various system configurations.

eess.SP↗

arXiv2022

Robotic Wireless Energy Transfer in Dynamic Environments: System Design and Experimental Validation

Wireless energy transfer (WET) is a ground-breaking technology for cutting the last wire between mobile sensors and power grids in smart cities. Yet, WET only offers effective transmission of energy over a short distance. Robotic WET is an emerging paradigm that mounts the energy transmitter on a mobile robot and navigates the robot through different regions in a large area to charge remote energy harvesters. However, it is challenging to determine the robotic charging strategy in an unknown and dynamic environment due to the uncertainty of obstacles. This paper proposes a hardware-in-the-loop joint optimization framework that offers three distinctive features: 1) efficient model updates and re-optimization based on the last-round experimental data; 2) iterative refinement of the anchor list for adaptation to different environments; 3) verification of algorithms in a high-fidelity Gazebo simulator and a multi-robot testbed. Experimental results show that the proposed framework significantly saves the WET mission completion time while satisfying collision avoidance and energy harvesting constraints.

cs.RO↗

arXiv2021

Highly Accurate and Reliable Wireless Network Slicing in 5th Generation Networks: A Hybrid Deep Learning Approach

In the current era, the next-generation networks like 5th generation (5G) and 6th generation (6G) networks require high security, low latency with a high reliable standards and capacity. In these networks, reconfigurable wireless network slicing is considered as one of the key elements for 5G and 6G networks. A reconfigurable slicing allows the operators to run various instances of the network using a single infrastructure for a better quality of services (QoS). The QoS can be achieved by reconfiguring and optimizing these networks using Artificial intelligence and machine learning algorithms. To develop a smart decision-making mechanism for network management and restricting network slice failures, machine learning-enabled reconfigurable wireless network solutions are required. In this paper, we propose a hybrid deep learning model that consists of a convolution neural network (CNN) and long short term memory (LSTM). The CNN performs resource allocation, network reconfiguration, and slice selection while the LSTM is used for statistical information (load balancing, error rate etc.) regarding network slices. The applicability of the proposed model is validated by using multiple unknown devices, slice failure, and overloading conditions. The overall accuracy of 95.17% is achieved by the proposed model that reflects its applicability.

cs.NI↗

arXiv2021

JOET: Sustainable Vehicle-assisted Edge Computing for Internet of Vehicles

Task offloading in Internet of Vehicles (IoV) involves numerous steps and optimization variables such as: where to offload tasks, how to allocate computation resources, how to adjust offloading ratio and transmit power for offloading, and such optimization variables and hybrid combination features are highly coupled with each other. Thus, this is a fully challenge issue to optimize these variables for task offloading to sustainably reduce energy consumption with load balancing while ensuring that a task is completed before its deadline. In this paper, we first provide a Mixed Integer Nonlinear Programming Problem (MINLP) formulation for such task offloading under energy and deadline constraints in IoV. Furthermore, in order to efficiently solve the formulated MINLP, we decompose it into two subproblems, and design a low-complexity Joint Optimization for Energy Consumption and Task Processing Delay (JOET) algorithm to optimize selection decisions, resource allocation, offloading ratio and transmit power adjustment. We carry out extensive simulation experiments to validate JOET. Simulation results demonstrate that JOET outperforms many representative existing approaches in quickly converge and effectively reduce energy consumption and delay. Specifically, average energy consumption and task processing delay have been reduced by 15.93% and 15.78%, respectively, and load balancing efficiency has increased by 10.20%.

cs.OH↗

arXiv2021

Irregular-Mapped Protograph LDPC-Coded Modulation: A Bandwidth-Efficient Solution for $5$G Networks with Massive Data-Storage Requirement

The huge amount of data produced in the fifth-generation (5G) networks not only brings new challenges to the reliability and efficiency of mobile devices but also drives rapid development of new storage techniques. With the benefits of fast access speed and high reliability, NAND flash memory has become a promising storage solution for the 5G networks. In this paper, we investigate a protograph-coded bit-interleaved coded modulation with iterative detection and decoding (BICM-ID) utilizing irregular mapping (IM) in the multi-level-cell (MLC) NAND flash-memory systems. First, we propose an enhanced protograph-based extrinsic information transfer (EPEXIT) algorithm to facilitate the analysis of protograph codes in the IM-BICM-ID systems. With the use of EPEXIT algorithm, a simple design method is conceived for the construction of a family of high-rate protograph codes, called irregular-mapped accumulate-repeat-accumulate (IMARA) codes, which possess both excellent decoding thresholds and linear-minimum-distance-growth property. Furthermore, motivated by the voltage-region iterative gain characteristics of IM-BICM-ID systems, a novel read-voltage optimization scheme is developed to acquire accurate read-voltage levels, thus minimizing the decoding thresholds of protograph codes. Theoretical analyses and error-rate simulations indicate that the proposed IMARA-aided IM-BICM-ID scheme and the proposed read-voltage optimization scheme remarkably improve the convergence and decoding performance of flash-memory systems. Thus, the proposed protograph-coded IM-BICM-ID flash-memory systems can be viewed as a reliable and efficient storage solution for the new-generation mobile networks with massive data-storage requirement.

cs.IT↗

arXiv2021

Protocol Stack Perspective For Low Latency and Massive Connectivity in Future Cellular Networks

With the emergence of Internet-of-Things (IoT) and ever-increasing demand for the newly connected devices, there is a need for more effective storage and processing paradigms to cope with the data generated from these devices. In this study, we have discussed different paradigms for data processing and storage including Cloud, Fog, and Edge computing models and their suitability in integrating with the IoT. Moreover, a detailed discussion on low latency and massive connectivity requirements of future cellular networks in accordance with machine-type communication (MTC) is also presented. Furthermore, the need to bring IoT devices to Internet connectivity and a standardized protocol stack to regulate the data transmission between these devices is also addressed while keeping in view the resource constraint nature of IoT devices.

cs.NI↗

arXiv2020

Com-DDPG: A Multiagent Reinforcement Learning-based Offloading Strategy for Mobile Edge Computing

The development of mobile services has impacted a variety of computation-intensive and time-sensitive applications, such as recommendation systems and daily payment methods. However, computing task competition involving limited resources increases the task processing latency and energy consumption of mobile devices, as well as time constraints. Mobile edge computing (MEC) has been widely used to address these problems. However, there are limitations to existing methods used during computation offloading. On the one hand, they focus on independent tasks rather than dependent tasks. The challenges of task dependency in the real world, especially task segmentation and integration, remain to be addressed. On the other hand, the multiuser scenarios related to resource allocation and the mutex access problem must be considered. In this paper, we propose a novel offloading approach, Com-DDPG, for MEC using multiagent reinforcement learning to enhance the offloading performance. First, we discuss the task dependency model, task priority model, energy consumption model, and average latency from the perspective of server clusters and multidependence on mobile tasks. Our method based on these models is introduced to formalize communication behavior among multiple agents; then, reinforcement learning is executed as an offloading strategy to obtain the results. Because of the incomplete state information, long short-term memory (LSTM) is employed as a decision-making tool to assess the internal state. Moreover, to optimize and support effective action, we consider using a bidirectional recurrent neural network (BRNN) to learn and enhance features obtained from agents' communication. Finally, we simulate experiments on the Alibaba cluster dataset. The results show that our method is better than other baselines in terms of energy consumption, load status and latency.

cs.DC↗

arXiv2020

Hardware Impaired Ambient Backscatter NOMA Systems: Reliability and Security

Non-orthogonal multiple access (NOMA) and ambient backscatter communication have been envisioned as two promising technologies for the Internet-of-things due to their high spectral efficiency and energy efficiency. Motivated by this fact, we consider an ambient backscatter NOMA system in the presence of a malicious eavesdropper. Under some realistic assumptions of residual hardware impairments (RHIs), channel estimation errors (CEEs) and imperfect successive interference cancellation (ipSIC), we investigate the physical layer security (PLS) of the ambient backscatter NOMA systems focusing on reliability and security. In order to further improve the security of the considered system, an artificial noise scheme is proposed where the radio frequency (RF) source acts as a jammer that transmits interference signal to the legitimate receivers and eavesdropper. On this basis, the analytical expressions for the outage probability (OP) and the intercept probability (IP) are derived. To gain more insights, the asymptotic analysis and diversity orders for the OP in the high signal-to-noise ratio (SNR) regime are carried out, and the asymptotic behaviors of the IP in the high main-to-eavesdropper ratio (MER) region are explored as well. Numerical results show that: 1) RHIs, CEEs and ipSIC have negative effects on the OP but positive effects on the IP; 2) Compared with CEEs, RHIs have a more serious impact on the reliability and security of the considered system; 3) There exists a trade-off between reliability and security, and this trade-off can be optimized by reducing the power coefficient of the artificial noise or increasing the interfering factor of readers; 4) There are error floors for the OP due to the CEEs and the reflection coefficient; 5) As MER grows large, the security for Rnand Rf is improved, while the security for T is reduced.

cs.IT↗

arXiv2020

Fully Decentralized Federated Learning Based Beamforming Design for UAV Communications

To handle the data explosion in the era of internet of things (IoT), it is of interest to investigate the decentralized network, with the aim at relaxing the burden to central server along with keeping data privacy. In this work, we develop a fully decentralized federated learning (FL) framework with an inexact stochastic parallel random walk alternating direction method of multipliers (ISPW-ADMM). Performing more communication efficient and enhanced privacy preservation compared with the current state-of-the-art, the proposed ISPW-ADMM can be partially immune to the impacts from time-varying dynamic network and stochastic data collection, while still in fast convergence. Benefits from the stochastic gradients and biased first-order moment estimation, the proposed framework can be applied to any decentralized FL tasks over time-varying graphs. Thus to further demonstrate the practicability of such framework in providing fast convergence, high communication efficiency, and system robustness, we study the extreme learning machine(ELM)-based FL model for robust beamforming (BF) design in UAV communications, as verified by the numerical simulations.

eess.SP↗

arXiv2019

Analysis and Optimization of Tail-Biting Spatially Coupled Protograph LDPC Codes for BICM-ID Systems

As a typical example of bandwidth-efficient techniques, bit-interleaved coded modulation with iterative decoding (BICM-ID) provides desirable spectral efficiencies in various wireless communication scenarios. In this paper, we carry out a comprehensive investigation on tail-biting (TB) spatially coupled protograph (SCP) low-density parity-check (LDPC) codes in BICM-ID systems. Specifically, we first develop a two-step design method to formulate a novel type of constellation mappers, referred to as labeling-bit-partial-match (LBPM) constellation mappers, for SC-P-based BICM-ID systems. The LBPM constellation mappers can be seamlessly combined with high-order modulations, such as M-ary phase-shift keying (PSK) and M-ary quadrature amplitude modulation (QAM). Furthermore, we conceive a new bit-level interleaving scheme, referred to as variable node matched mapping (VNMM) scheme, which can substantially exploit the structure feature of SC-P codes and the unequal protection-degree property of labeling bits to trigger the wave-like convergence for TB-SC-P codes. In addition, we propose a hierarchical extrinsic information transfer (EXIT) algorithm to predict the convergence performance (i.e., decoding thresholds) of the proposed SC-P-based BICM-ID systems. Theoretical analyses and simulation results illustrate that the LBPM-mapped SC-P-based BICM-ID systems are remarkably superior to the state-of-the-art mapped counterparts. Moreover, the proposed SC-P-based BICM-ID systems can achieve even better error performance with the aid of the VNMM scheme. As a consequence, the proposed LBPM constellation mappers and VNMM scheme make the SC-P-based BICM-ID systems a favorable choice for the future-generation wireless communication systems.

cs.IT↗

arXiv2019

Physical-Layer Network Coding: An Efficient Technique for Wireless Communications

As a subfield of network coding, physical-layer network coding (PNC) can effectively enhance the throughput of wireless networks by mapping superimposed signals at receiver to other forms of user messages. Over the past twenty years, PNC has received significant research attention and has been widely studied in various communication scenarios, e.g., two-way relay communications (TWRC), nonorthogonal multiple access (NOMA) in 5G networks, random access networks, etc. To ensure network reliability, channel-coded PNC is proposed and related communication techniques are investigated, such as the design of channel code, low-complexity decoding, and cross-layer design. In this article, we briefly review the variants of channel-coded PNC wireless communications with the aim of inspiring future research activities in this area. We also put forth open research problems along with a few selected research directions under PNC-aided frameworks.

eess.SP↗

arXiv2019

When Internet of Things Meets Blockchain: Challenges in Distributed Consensus

Blockchain has been regarded as a promising technology for Internet of Things (IoT), since it provides significant solutions for decentralized network which can address trust and security concerns, high maintenance cost problem, etc. The decentralization provided by blockchain can be largely attributed to the use of consensus mechanism, which enables peer-to-peer trading in a distributed manner without the involvement of any third party. This article starts from introducing the basic concept of blockchain and illustrating why consensus mechanism plays an indispensable role in a blockchain enabled IoT system. Then, we discuss the main ideas of two famous consensus mechanisms including Proof of Work (PoW) and Proof of Stake (PoS), and list their limitations in IoT. Next, two mainstream Direct Acyclic Graph (DAG) based consensus mechanisms, i.e., the Tangle and Hashgraph, are reviewed to show why DAG consensus is more suitable for IoT system than PoW and PoS. Potential issues and challenges of DAG based consensus mechanism to be addressed in the future are discussed in the last.

cs.DC↗

arXiv2019

On the Impact of Mode Selection on Effective Capacity of Device-to-Device Communication

Consider a device to device (D2D) link which utilizes the mode selection to decide between the direct mode and cellular mode. This paper investigates the impact of mode selection on effective capacity (EC) (the maximum sustainable constant arrival rate at a transmitters queue under statistical quality of service constraints) of a D2D link for both overlay and underlay scenarios. Due to lack of channel state information, the transmit device sends data at a fixed rate and fixed power; this fact combined with mode selection makes the D2D channel a Markov service process. Thus, the EC is obtained by calculating the entries of the transition probability matrix corresponding to the Markov D2D channel. Numerical results show that the EC decays exponentially (and the gain of overlay D2D over underlay D2D diminishes) with the increase in estimation error of the pathloss measurements utilized by the mode selection.

eess.SP↗

arXiv2017

D3.2: SPEED-5G enhanced functional and system architecture, scenarios and performance evaluation metrics

This deliverable contains a detailed description of the use cases considered in SPEED-5G, which will be used as a basis for demonstration in project. These use cases are Dynamic Channel selection, Load balancing, carrier aggregation. This deliverable also explains the SPEED-5G architecture design principles, which is based on software-defined networking and network function virtualisation. The degree of virtualisation is further illustrated by a number of novel contributions from involved partners. In the end, KPIs for each use case are presented, along with the description of how these KPIs can support 5G-PPP KPIs.

cs.NI↗

arXiv2017

Millimeter Wave Communications for Future Mobile Networks

Millimeter wave (mmWave) communications have recently attracted large research interest, since the huge available bandwidth can potentially lead to rates of multiple Gbps (gigabit per second) per user. Though mmWave can be readily used in stationary scenarios such as indoor hotspots or backhaul, it is challenging to use mmWave in mobile networks, where the transmitting/receiving nodes may be moving, channels may have a complicated structure, and the coordination among multiple nodes is difficult. To fully exploit the high potential rates of mmWave in mobile networks, lots of technical problems must be addressed. This paper presents a comprehensive survey of mmWave communications for future mobile networks (5G and beyond). We first summarize the recent channel measurement campaigns and modeling results. Then, we discuss in detail recent progresses in multiple input multiple output (MIMO) transceiver design for mmWave communications. After that, we provide an overview of the solution for multiple access and backhauling, followed by analysis of coverage and connectivity. Finally, the progresses in the standardization and deployment of mmWave for mobile networks are discussed.

cs.IT↗