arXiv subjects

Shahram Shirani

Publications and source records attributed to Shahram Shirani.

46 records · Page 3Linked to original sources

arXiv2020

Unlabeled Data Deployment for Classification of Diabetic Retinopathy Images Using Knowledge Transfer

Convolutional neural networks (CNNs) are extensively beneficial for medical image processing. Medical images are plentiful, but there is a lack of annotated data. Transfer learning is used to solve the problem of lack of labeled data and grants CNNs better training capability. Transfer learning can be used in many different medical applications; however, the model under transfer should have the same size as the original network. Knowledge distillation is recently proposed to transfer the knowledge of a model to another one and can be useful to cover the shortcomings of transfer learning. But some parts of the knowledge may not be distilled by knowledge distillation. In this paper, a novel knowledge distillation using transfer learning is proposed to transfer the whole knowledge of a model to another one. The proposed method can be beneficial and practical for medical image analysis in which a small number of labeled data are available. The proposed process is tested for diabetic retinopathy classification. Simulation results demonstrate that using the proposed method, knowledge of an extensive network can be transferred to a smaller model.

cs.CV↗

arXiv2018

Adaptive Blind Image Watermarking Using Fuzzy Inference System Based on Human Visual Perception

Development of digital content has increased the necessity of copyright protection by means of watermarking. Imperceptibility and robustness are two important features of watermarking algorithms. The goal of watermarking methods is to satisfy the tradeoff between these two contradicting characteristics. Recently watermarking methods in transform domains have displayed favorable results. In this paper, we present an adaptive blind watermarking method which has high transparency in areas that are important to human visual system. We propose a fuzzy system for adaptive control of the embedding strength factor. Features such as saliency, intensity, and edge-concentration, are used as fuzzy attributes. Redundant embedding in discrete cosine transform (DCT) of wavelet domain has increased the robustness of our method. Experimental results show the efficiency of the proposed method and better results are obtained as compared to comparable methods with same size of watermark logo.

cs.MM↗

arXiv2017

Real time ridge orientation estimation for fingerprint images

Fingerprint verification is an important bio-metric technique for personal identification. Most of the automatic verification systems are based on matching of fingerprint minutiae. Extraction of minutiae is an essential process which requires estimation of orientation of the lines in an image. Most of the existing methods involve intense mathematical computations and hence are performed through software means. In this paper a hardware scheme to perform real time orientation estimation is presented which is based on pipelined architecture. Synthesized circuits proved the functionality and accuracy of the suggested method.

cs.CV↗

arXiv2017

Adaptive Real-Time Removal of Impulse Noise in Medical Images

Noise is an important factor that degrades the quality of medical images. Impulse noise is a common noise, which is caused by malfunctioning of sensor elements or errors in the transmission of images. In medical images due to presence of white foreground and black background, many pixels have intensities similar to impulse noise and distinction between noisy and regular pixels is difficult. In software techniques, the accuracy of the noise removal is more important than the algorithm's complexity. But for hardware implementation having a low complexity algorithm with an acceptable accuracy is essential. In this paper a low complexity de-noising method is proposed that removes the noise by local analysis of the image blocks. The proposed method distinguishes non-noisy pixels that have noise-like intensities. All steps are designed to have low hardware complexity. Simulation results show that for different magnetic resonance images, the proposed method removes impulse noise with an acceptable accuracy.

cs.CV↗

arXiv2017

Hierarchical Watermarking Framework Based on Analysis of Local Complexity Variations

Increasing production and exchange of multimedia content has increased the need for better protection of copyright by means of watermarking. Different methods have been proposed to satisfy the tradeoff between imperceptibility and robustness as two important characteristics in watermarking while maintaining proper data-embedding capacity. Many watermarking methods use image independent set of parameters. Different images possess different potentials for robust and transparent hosting of watermark data. To overcome this deficiency, in this paper we have proposed a new hierarchical adaptive watermarking framework. At the higher level of hierarchy, complexity of an image is ranked in comparison with complexities of images of a dataset. For a typical dataset of images, the statistical distribution of block complexities is found. At the lower level of the hierarchy, for a single cover image that is to be watermarked, complexities of blocks can be found. Local complexity variation (LCV) among a block and its neighbors is used to adaptively control the watermark strength factor of each block. Such local complexity analysis creates an adaptive embedding scheme, which results in higher transparency by reducing blockiness effects. This two level hierarchy has enabled our method to take advantage of all image blocks to elevate the embedding capacity while preserving imperceptibility. For testing the effectiveness of the proposed framework, contourlet transform (CT) in conjunction with discrete cosine transform (DCT) is used to embed pseudo-random binary sequences as watermark. Experimental results show that the proposed framework elevates the performance the watermarking routine in terms of both robustness and transparency.

cs.MM↗

arXiv2017

Vessel Segmentation and Catheter Detection in X-Ray Angiograms Using Superpixels

Coronary artery disease (CAD) is the leading causes of death around the world. One of the most common imaging methods for diagnosing this disease is X-ray angiography. Diagnosing using these images is usually challenging due to non-uniform illumination, low contrast, presence of other body tissues, presence of catheter etc. These challenges make the diagnoses task of cardiologists tougher and more prone to misdiagnosis. In this paper we propose a new automated framework for coronary arteries segmentation, catheter detection and center-line extraction in x-ray angiography images. Our proposed segmentation method is based on superpixels. In this method at first three different superpixel scales are exploited and a measure for vesselness probability of each superpixel is determined. A majority voting is used for obtaining an initial segmentation map from these three superpixel scales. This initial segmentation is refined by finding the orthogonal line on each ridge pixel of vessel region. In this framework we use our catheter detection and tracking method which detects the catheter by finding its ridge in the first frame and traces in other frames by fitting a second order polynomial on it. Also we use the image ridges for extracting the coronary arteries centerlines. We evaluated our method qualitatively and quantitatively on two different challenging datasets and compared it with one of the previous well-known coronary arteries segmentation methods. Our method could detect the catheter and reduced the false positive rate in addition to achieving better segmentation results. The evaluation results prove that our method performs better in a much shorter time.

cs.CV↗

arXiv2017

Real-Time Impulse Noise Removal from MR Images for Radiosurgery Applications

In the recent years image processing techniques are used as a tool to improve detection and diagnostic capabilities in the medical applications. Medical applications have been so much affected by these techniques which some of them are embedded in medical instruments such as MRI, CT and other medical devices. Among these techniques, medical image enhancement algorithms play an essential role in removal of the noise which can be produced by medical instruments and during image transfer. It has been proved that impulse noise is a major type of noise, which is produced during medical operations, such as MRI, CT, and angiography, by their image capturing devices. An embeddable hardware module which is able to denoise medical images before and during surgical operations could be very helpful. In this paper an accurate algorithm is proposed for real-time removal of impulse noise in medical images. All image blocks are divided into three categories of edge, smooth, and disordered areas. A different reconstruction method is applied to each category of blocks for the purpose of noise removal. The proposed method is tested on MR images. Simulation results show acceptable denoising accuracy for various levels of noise. Also an FPAG implementation of our denoising algorithm shows acceptable hardware resource utilization. Hence, the algorithm is suitable for embedding in medical hardware instruments such as radiosurgery devices.

cs.AR↗

arXiv2017

1D Modeling of Sensor Selection Problem for Weak Barrier Coverage and Gap Mending in Wireless Sensor Networks

In this paper, we first remodel the line coverage as a 1D discrete problem with co-linear targets. Then, an order-based greedy algorithm, called OGA, is proposed to solve the problem optimally. It will be shown that the existing order in the 1D modeling, and especially the resulted Markov property of the selected sensors can help design greedy algorithms such as OGA. These algorithms demonstrate optimal/efficient performance and have lower complexity compared to the state-of-the-art. Furthermore, it is demonstrated that the conventional continuous line coverage problem can be converted to an equivalent discrete problem and solved optimally by OGA. Next, we formulate the well-known weak barrier coverage problem as an instance of the continuous line coverage problem (i.e. a 1D problem) as opposed to the conventional 2D graph-based models. We demonstrate that the equivalent discrete version of this problem can be solved optimally and faster than the state-of-the-art methods using an extended version of OGA, called K-OGA. Moreover, an efficient local algorithm, called LOGM, is proposed to mend barrier gaps due to sensor failure. In the case of m gaps, LOGM is proved to select at most 2m-1 sensors more than the optimal while being local and implementable in distributed fashion. We demonstrate the optimal/efficient performance of the proposed algorithms via extensive simulations.

cs.DS↗

arXiv2017

OCRAPOSE II: An OCR-based indoor positioning system using mobile phone images

In this paper, we propose an OCR (optical character recognition)-based localization system called OCRAPOSE II, which is applicable in a number of indoor scenarios including office buildings, parkings, airports, grocery stores, etc. In these scenarios, characters (i.e. texts or numbers) can be used as suitable distinctive landmarks for localization. The proposed system takes advantage of OCR to read these characters in the query still images and provides a rough location estimate using a floor plan. Then, it finds depth and angle-of-view of the query using the information provided by the OCR engine in order to refine the location estimate. We derive novel formulas for the query angle-of-view and depth estimation using image line segments and the OCR box information. We demonstrate the applicability and effectiveness of the proposed system through experiments in indoor scenarios. It is shown that our system demonstrates better performance compared to the state-of-the-art benchmarks in terms of location recognition rate and average localization error specially under sparse database condition.

cs.CV↗

arXiv2014

Subjective and Objective Quality Assessment of Image: A Survey

With the increasing demand for image-based applications, the efficient and reliable evaluation of image quality has increased in importance. Measuring the image quality is of fundamental importance for numerous image processing applications, where the goal of image quality assessment (IQA) methods is to automatically evaluate the quality of images in agreement with human quality judgments. Numerous IQA methods have been proposed over the past years to fulfill this goal. In this paper, a survey of the quality assessment methods for conventional image signals, as well as the newly emerged ones, which includes the high dynamic range (HDR) and 3-D images, is presented. A comprehensive explanation of the subjective and objective IQA and their classification is provided. Six widely used subjective quality datasets, and performance measures are reviewed. Emphasis is given to the full-reference image quality assessment (FR-IQA) methods, and 9 often-used quality measures (including mean squared error (MSE), structural similarity index (SSIM), multi-scale structural similarity index (MS-SSIM), visual information fidelity (VIF), most apparent distortion (MAD), feature similarity measure (FSIM), feature similarity measure for color images (FSIMC), dynamic range independent measure (DRIM), and tone-mapped images quality index (TMQI)) are carefully described, and their performance and computation time on four subjective quality datasets are evaluated. Furthermore, a brief introduction to 3-D IQA is provided and the issues related to this area of research are reviewed.

cs.MM↗