SearcharxivSearch

arXiv subjects

Shancheng Zhao

Publications and source records attributed to Shancheng Zhao.

9 recordsLinked to original sources

Learning-Based Motion Planning for Dynamic Environments: From Foundational Algorithms to Emerging Paradigms

Motion planning in dynamic environments is a fundamental problem in robotics, aiming to generate safe and efficient paths, trajectories, or control actions in the presence of moving obstacles, uncertain predictions, and multi-agent interactions. It has broad applications in autonomous driving, service robotics, warehouse logistics, human-robot collaboration, crowd navigation, and multi-robot systems. This survey reviews representative works published primarily between 2015 and 2025, with a particular focus on how recent learning-based advances extend, complement, or interact with classical planning foundations. We first revisit classical planning methods as algorithmic foundations and reference frameworks for learning-based extensions. We then propose a role-of-learning taxonomy that categorizes existing methods according to how learning participates in the planning pipeline, including direct policy learning, learning-augmented classical planning, hybrid planning, and training enhancement methods. For each category, we summarize the main problem settings, representative algorithms, key ideas, integration mechanisms, strengths, and limitations. We further analyze how observation representations, prediction uncertainty, interaction modeling, planner integration, safety constraints, and training strategies shape learning-based motion planning in dynamic environments. Finally, we discuss open challenges and future directions, including sim-to-real gap, safe and certifiable planning, dense crowd navigation, perception-planning coupling, and embodied AI.

cs.RO

Coverage Path Planning: Classical Foundations, Recent Advances, and Future Directions

Coverage path planning (CPP) is a fundamental problem in robot motion planning, whose aim is to produce robot trajectories that provide complete coverage of target workspaces while minimizing task-specific objectives such as path length, overlap, number of turns, and energy consumption. CPP has widespread applications in cleaning, inspection, mapping, agriculture, manufacturing, surveillance, demining, and environmental monitoring. Although classical CPP has been extensively studied, recent advances have extended CPP beyond single-robot settings to multi-robot systems, complex 3D environments, constrained platforms, learning-based coverage planning, and visual coverage tasks. This paper presents a comprehensive survey of 125 representative works published primarily between 2015 and 2026, while presenting the evolution of recent developments in light of the classical CPP methods published before 2015. The CPP methods are organized into six main categories: single-robot CPP, multi-robot CPP, 3D CPP, constrained CPP, learning-based CPP, and visual CPP. For each category, the review summarizes the main planning formulations, representative algorithms, strengths, and limitations. In addition, the review analyzes how environmental knowledge, workspace geometry, robot constraints, sensing objectives, and coordination requirements shape the CPP problem. The survey further discusses open challenges in scalable online planning, multi-robot coordination, 3D and visual coverage, unified platform-constrained and resource-aware coverage, and learning-enhanced coverage. Thus, the survey provides a structured overview of recent CPP developments and future research directions.

cs.RO

Motion Planning in Dynamic Environments: A Survey from Classical to Modern Methods

Motion planning in dynamic environments requires robots to continuously adapt their paths in response to environmental changes for safe and uninterrupted navigation. While many surveys have reviewed planning in static settings, systematic reviews focused on dynamic environments remain limited. This paper presents a comprehensive survey of 138 works, primarily published between 2015 and 2025, spanning both classical and learning-based approaches. The motion planning methods are grouped into five categories based on the concepts of sampling, graph search, model predictive control, learning, and additional classical local planning approaches, including velocity obstacles, potential fields and dynamic windows. The learning techniques include supervised learning and reinforcement learning. We also discuss the role of dynamic perception in motion planning, covering techniques for detecting and modeling moving obstacles using cameras, LiDAR, and event-based sensors. The survey analyzes the principles, strengths, and limitations of each method, with particular attention to challenges unique to dynamic environments, such as prediction uncertainty, human-robot interaction, and the freezing robot problem. The survey provides researchers with a structured understanding of motion planning methods in dynamic environments.

cs.RO

DoF Upper Bound on Three-User MISO Broadcast Channel with Two Antennas and Mixed CSIT

With delayed and imperfect current channel state information at the transmitter (CSIT), namely mixed CSIT, the sum degrees-of-freedom (sum-DoF) in the two-user multiple-input multiple-output (MIMO) broadcast channel and the $K$-user multiple-input single-output (MISO) broadcast channel with not-less-than-$K$ transmit antennas have been obtained. However, the case of the three-user broadcast channel with two transmit antennas and mixed CSIT is still unexplored. In this paper, we investigate the sum-DoF upper bound of three-user MISO broadcast channel with two transmit antennas and mixed CSIT. By exploiting genie-aided signaling and extremal inequalities, we derive the sum-DoF upper bound as $(1-α)3/2 + 9α/4$, which is at most $12.5\%$ larger than the expected sum-DoF, given by $(1-α)3/2 + 2α$. This indicates that the gap may mitigate by better bounding the imperfect current CSIT counterpart.

cs.IT

Free Ride on LDPC Coded Transmission

In this paper, we formulate a new problem to cope with the transmission of extra bits over an existing coded transmission link (referred to as coded payload link) without any cost of extra transmission energy or extra bandwidth. This is possible since a gap to the channel capacity typically exists for a practical code. A new concept, termed as accessible capacity, is introduced to specify the maximum rate at which the superposition transmission of extra bits is reliable and has a negligible effect on the performance of the coded payload link. For a binary-input output-symmetric (BIOS) memoryless channel, the accessible capacity can be characterized as the difference between the channel capacity and the mutual information rate of the coded payload link, which can be numerically evaluated for very short payload codes. For a general payload code, we present a simple lower bound on the accessible capacity, given by the channel capacity minus the coding rate of the payload code. We then focus on the scenarios where low-density parity-check (LDPC) codes are implemented for the payload link. We propose to transmit extra bits by random superposition for encoding, and exhaustive search (with the aid of statistical learning) for decoding. We further propose, by establishing an auxiliary channel (called syndrome channel) induced from "zero-forcing" over the binary field, to transmit extra bits with structured codes such as repetition codes and first-order Reed-Muller (RM) codes. Numerical results show that up to 60 extra bits can be reliably transmitted along with a rate-1/2 LDPC code of length 8064.

cs.IT

Partially Block Markov Superposition Transmission of Gaussian Source with Nested Lattice Codes

This paper studies the transmission of Gaussian sources through additive white Gaussian noise (AWGN) channels in bandwidth expansion regime, i.e., the channel bandwidth is greater than the source bandwidth. To mitigate the error propagation phenomenon of conventional digital transmission schemes, we propose in this paper a new capacity-approaching joint source channel coding (JSCC) scheme based on partially block Markov superposition transmission (BMST) of nested lattice codes. In the proposed scheme, first, the Gaussian source sequence is discretized by a lattice-based quantizer, resulting in a sequence of lattice points. Second, these lattice points are encoded by a short systematic group code. Third, the coded sequence is partitioned into blocks of equal length and then transmitted in the BMST manner. Main characteristics of the proposed JSCC scheme include: 1) Entropy coding is not used explicitly. 2) Only parity-check sequence is superimposed, hence, termed partially BMST (PBMST). This is different from the original BMST. To show the superior performance of the proposed scheme, we present extensive simulation results which show that the proposed scheme performs within 1.0 dB of the Shannon limits. Hence, the proposed scheme provides an attractive candidate for transmission of Gaussian sources.

cs.IT

Joint Detection/Decoding Algorithms for Nonbinary LDPC Codes over ISI Channels

This paper is concerned with the application of nonbinary low-density parity-check (NB-LDPC) codes to binary input inter-symbol interference (ISI) channels. Two low-complexity joint detection/decoding algorithms are proposed. One is referred to as max-log-MAP/X-EMS algorithm, which is implemented by exchanging soft messages between the max-log-MAP detector and the extended min-sum (EMS) decoder. The max-log-MAP/X-EMS algorithm is applicable to general NB-LDPC codes. The other one, referred to as Viterbi/GMLGD algorithm, is designed in particular for majority-logic decodable NB-LDPC codes. The Viterbi/GMLGD algorithm works in an iterative manner by exchanging hard-decisions between the Viterbi detector and the generalized majority-logic decoder(GMLGD). As a by-product, a variant of the original EMS algorithm is proposed, which is referred to as μ-EMS algorithm. In the μ-EMS algorithm, the messages are truncated according to an adaptive threshold, resulting in a more efficient algorithm. Simulations results show that the max-log-MAP/X-EMS algorithm performs as well as the traditional iterative detection/decoding algorithm based on the BCJR algorithm and the QSPA, but with lower complexity. The complexity can be further reduced for majority-logic decodable NB-LDPC codes by executing the Viterbi/GMLGD algorithm with a performance degradation within one dB. Simulation results also confirm that the μ-EMS algorithm requires lower computational loads than the EMS algorithm with a fixed threshold. These algorithms provide good candidates for trade-offs between performance and complexity.

cs.IT

A New Ensemble of Rate-Compatible LDPC Codes

In this paper, we presented three approaches to improve the design of Kite codes (newly proposed rateless codes), resulting in an ensemble of rate-compatible LDPC codes with code rates varying "continuously" from 0.1 to 0.9 for additive white Gaussian noise (AWGN) channels. The new ensemble rate-compatible LDPC codes can be constructed conveniently with an empirical formula. Simulation results show that, when applied to incremental redundancy hybrid automatic repeat request (IR-HARQ) system, the constructed codes (with higher order modulation) perform well in a wide range of signal-to-noise-ratios (SNRs).

cs.IT