arXiv subjects

Shannon K. Yee

Publications and source records attributed to Shannon K. Yee.

4 recordsLinked to original sources

arXiv2022

Spatial and doping effects on radiative recombination in thin-film near-field photonic energy converters

Modeling radiative recombination is crucial to the analysis of photonic energy converters. In this work, a local radiative recombination coefficient is defined and derived based on fluctuational electrodynamics that is applicable to thin-film cells in both the near field and far field. The predicted radiative recombination coefficient of an InAs cell deviates from the van Roosbroeck-Shockley relation when the thickness is less than 10 um and the difference exceeds fourfold with a 10 nm film. The local radiative recombination coefficient is orders of magnitude higher when an InAs cell is configured in the near field. The local radiative recombination coefficient reduces as the doping level approaches that of a degenerate semiconductor. The maximum output power and efficiency of a thermoradiative cell would be apparently overpredicted if the luminescence coefficient (defined in this letter) were taken as unity for heavily doped semiconductors.

physics.app-ph↗

arXiv2021

A Novel Near-field Photonic Thermal Diode with hBN and InSb

Similar to the diode in electronics, a thermal diode is a two-terminal device that allows heat to transfer easier in one direction (forward bias) than in the opposite direction (reverse bias). Unlike conductive and convective thermal diodes, a photonic thermal diode operates in a contactless mode and may afford a large operating temperature range. In this work, a novel near-field photonic thermal diode with hexagonal boron nitride (hBN) and indium antimonide (InSb) is proposed and theoretically demonstrated. The temperature dependence of the interband absorption of InSb is used to couple (or decouple) with the hyperbolic phonon polaritons in hBN. The numerical analysis predicts a rectification ratio greater than 17 for a 10 nm vacuum gap when operating at an average temperature of 300 K and a temperature difference of 200 K. The calculated rectification ratio exceeds 35 with higher average temperatures and larger temperature differences. The mechanism proposed here for achieving photonic thermal rectification provides a new way of controlling radiative heat transfer.

physics.app-ph↗

arXiv2021

Improved performance of a near-field thermophotovoltaic system by a back gapped reflector

Various spectral control techniques can be applied to improve the performance of a thermophotovoltaic (TPV) system. For example, a back surface reflector (BSR) can improve the performance of TPV systems. A conventional metal BSR structure enhances the photogeneration rate by increasing the absorption probability of photons via back surface reflection, affording a second chance for absorption. However, surface passivation and external luminescence effects introduced by BSR structures have been previously ignored, which potentially decreases the performance of TPV systems. Recently, a back gapped reflector (BGR) structure was proposed to greatly improve the performance of far-field TPV systems by reducing reflection loss at the semiconductor-metal interface. In the present work, the performance improvement on a thin-film, near-field InAs TPV system with a BGR is investigated, comparing its performance to that with a conventional metal BSR. Surface passivation conditions are also investigated to further improve the performance of TPV systems with back reflectors. The output power and efficiency are calculated using an iterative model combining fluctuational electrodynamics and the full drift-diffusion model. For the well-passivated condition, when the BSR is replaced by the BGR, the calculated conversion efficiency was improved from 16.4% to 21% and the output power was increased by 10% for the near-field regime. Finally, the reflection loss and external luminescence loss are analyzed to explain the performance improvement.

physics.app-ph↗

arXiv2021

Spatial profiles of photon chemical potential in near-field thermophotovoltaic cells

Emitted photons stemming from the radiative recombination of electron-hole pairs carry chemical potential in radiative energy converters. This luminescent effect can substantially alter the local net photogeneration in near-field thermophotovoltaic cells. Several assumptions involving the luminescent effect are commonly made in modeling photovoltaic devices; in particular, the photon chemical potential is assumed to be zero or a constant prescribed by the bias voltage. The significance of photon chemical potential depends upon the emitter temperature, the semiconductor properties, and the injection level. Hence, these assumptions are questionable in thermophotovoltaic devices operating in the near-field regime. In the present work, an iterative solver that combines fluctuational electrodynamics with the drift-diffusion model is developed to tackle the coupled photon and charge transport problem, enabling the determination of the spatial profile of photon chemical potential beyond the detailed balance approach. The difference between the results obtained by allowing the photon chemical potential to vary spatially and by assuming a constant value demonstrates the limitations of the conventional approaches. This study is critically important for performance evaluation of near-field thermophotovoltaic systems.

physics.app-ph↗