SearcharxivSearch

arXiv subjects

Shanti Bhattacharya

Publications and source records attributed to Shanti Bhattacharya.

10 recordsLinked to original sources

LWGNet: Learned Wirtinger Gradients for Fourier Ptychographic Phase Retrieval

Fourier Ptychographic Microscopy (FPM) is an imaging procedure that overcomes the traditional limit on Space-Bandwidth Product (SBP) of conventional microscopes through computational means. It utilizes multiple images captured using a low numerical aperture (NA) objective and enables high-resolution phase imaging through frequency domain stitching. Existing FPM reconstruction methods can be broadly categorized into two approaches: iterative optimization based methods, which are based on the physics of the forward imaging model, and data-driven methods which commonly employ a feed-forward deep learning framework. We propose a hybrid model-driven residual network that combines the knowledge of the forward imaging system with a deep data-driven network. Our proposed architecture, LWGNet, unrolls traditional Wirtinger flow optimization algorithm into a novel neural network design that enhances the gradient images through complex convolutional blocks. Unlike other conventional unrolling techniques, LWGNet uses fewer stages while performing at par or even better than existing traditional and deep learning techniques, particularly, for low-cost and low dynamic range CMOS sensors. This improvement in performance for low-bit depth and low-cost sensors has the potential to bring down the cost of FPM imaging setup significantly. Finally, we show consistently improved performance on our collected real data.

cs.CV

Vector mode decay in atmospheric turbulence: a quantum inspired analysis

Vector beams are inhomogeneously polarized optical fields with nonseparable, quantum-like correlations between their polarisation and spatial components, and hold tremendous promise for classical and quantum communication across various channels, e.g. the atmosphere, underwater, and in optical fibre. Here we show that by exploiting their quantum-like features by virtue of the nonseparability of the field, the decay of both the polarisation and spatial components can be studied in tandem. In particular, we invoke the principle of channel state duality to show that the degree of nonseparability of any vector mode is purely determined by that of a maximally nonseparable one, which we confirm using orbital angular momentum (OAM) as an example for topological charges of l = 1 and l = 10 in a turbulent atmosphere. A consequence is that the well-known cylindrical vector vortex beams are sufficient to predict the behaviour of all vector OAM states through the channel, and find that the rate of decay in vector quality decreases with increasing OAM value, even though the spread in OAM is opposite, increasing with OAM. Our approach offers a fast and easy probe of noisy channels, while at the same time revealing the power of quantum tools applied to classical light.

physics.optics

All-Digital Stokes Polarimetry with a Digital Micro-mirror Device

Stokes polarimetry is widely used to extract the polarisation structure of optical fields, typically from six measurements, although it can be extracted from only four. To measure the required intensities, most approaches are based on optical polarisation components. In this work, we present an all-digital approach that enables a rapid measure of all four intensities without any moving components. Our method employs a Polarisation Grating (PG) to simultaneously project the incoming mode into left- and right-circular polarised states, followed by a polarisation-insensitive Digital Micromirror Device (DMD), which digitally introduces a phase retardance for the acquisition of the remaining two polarisation states. We demonstrate how this technique can be applied to measuring the SoP, vectorness and intra-modal phase of optical fields, without any moving components and shows excellent agreement with theory, illustrating fast, real-time polarimetry.

physics.optics

A compact single channel interferometer to study vortex beam propagation

We propose and demonstrate a single channel interferometer that can be used to study how vortex beams propagate. The interferometer consists of a multifunctional diffractive optical element (MDOE) synthesized by the spatial random multiplexing of a Fresnel zone plate and a spiral Fresnel zone plate with different focal lengths. The MDOE generates two co-propagating beams, such that only the beam carrying orbital angular momentum is modulated by an annular stack of thin scatterers located at the focal plane of the Fresnel zone plate, while the other beam passes through the centre of the annulus without any modulation. The interference pattern is recorded at the focal plane of the spiral Fresnel zone plate. The scattering of vortex beams through stacks consisting of different number of thin scatterers was studied using the proposed optical setup. Conflicting results have been reported earlier on whether higher or lower charge beams suffer more deterioration. The proposed interferometer provides a relatively simple and compact means of experimentally studying propagation of vortex beams through scattering medium.

physics.optics

Improving Dynamic Range of Speckle Correlation based Optical Lever by spatial multiplexing

Speckle correlation based optical levers SC OptLev possess attractive characteristics suitable for sensing small changes in the angular orientations of surfaces. In this study, we propose and demonstrate a spatial multiplexing technique for improving the dynamic range of SC OptLev. When the surface is in its initial position, a synthetic speckle intensity pattern, larger than the area of the image sensor is created by transversely shifting the image sensor and recording different sections of a larger speckle pattern. Then, the acquired images are stitched together by a computer program into one relatively large synthetic speckle pattern. Following the calibration stage, the synthetic speckle intensity pattern is used to sense changes in the surfaces angular orientation. The surface is monitored in realtime by recording part of the speckle pattern which lies within the sensor area. Next, the recorded speckle pattern is a cross correlated with the synthetic speckle pattern in the computer. The resulting shift of the correlation peak indicates the angular orientations of the reflective surface under test. This spatial multiplexing technique enables sensing changes in the angular orientation of the surface beyond the limit imposed by the physical size of the image sensor.

physics.ins-det

Dielectric cross-shaped resonator based metasurface for vortex beam generation in Mid-IR and THz wavelengths

Metasurfaces are engineered thin surfaces comprising two dimensional (2D) arrays of sub-wavelength spaced and sub-wavelength sized resonators. Metasurfaces can locally manipulate the amplitude, phase and polarization of light with high spatial resolution. In this study, we report numerical and experimental results of a vortex-beam-generating metasurface fabricated specifically for infrared (IR) and terahertz (THz) wavelengths. The designed metasurface consisted of a 2D array of dielectric cross-shaped resonators with spatially varying length, thereby providing desired spatially varying phase shift to the incident light. The metasurface was found to be insensitive to polarization of incident light. The dimensions of the cross-resonators were calculated using rigorous finite difference time domain (FDTD) analysis. The spectral scalability via physical scaling of meta resonators was demonstrated using two vortex generating optical elements operating at 8.8~$μ$m (IR) and 0.78~THz (Terahertz). The vortex beam generated in the mid-IR spectral range was imaged using FTIR imaging miscroscope equipped with a focal plane array (FPA) detector. This design could be used for efficient wavefront shaping as well as various optical imaging applications in mid-IR spectral range, where polarization insensitivity is desired.

physics.optics

Implementation of a speckle correlation based optical lever (SC-OptLev) with extended dynamic range

A speckle correlation based optical lever (SC-OptLev) is constructed for the measurement of small changes in the angle of orientation of a surface. The dynamic range of SC-OptLev is found to be twice that of a conventional OptLev for the same experimental configurations. Different filtering mechanisms are implemented and the correlation results are compared. Two types of computer automated SC-OptLevs, open source based computing system with a low-cost image sensor and a commercial computing system, are presented with assistive computational modules.

physics.ins-det

GDoeSII: Open source software for design of diffractive optical elements and conversion to GDSII lithography files

We develop an open source software "GDoeSII" for the simulation of Fresnel (near field) and Fraunhofer (far field) diffraction integrals of diffractive optical elements (DOE). It can compute the intensity distributions at a desired plane from the DOE. This software can also convert the phase profiles of the DOEs from standard image formats such as JPG and PNG to lithography graphic format GDSII for fabrication purposes. The conversion algorithm used in this program groups adjacent same-valued pixels and creates a single cell rather than creating a cell for each and every pixel in the image file. This results in a faster and much lower output GDSII file size. Conversion to multi-layer GDSII format is also possible for grayscale lithography. We show as an example: The simulation, GDSII conversion, fabrication and experimental results for the case of an Airy beam generator. This application offers a complete platform for researchers working in diffractive optics from simulations to lithography

physics.comp-ph

All-dielectric metasurface for wavefront control at terahertz frequencies

Recently, metasurfaces have gained popularity due to their ability to offer a spatially varying phase response, low intrinsic losses and high transmittance. Here, we demonstrate numerically and experimentally a silicon metasurface at THz frequencies that converts a Gaussian beam into a Vortex beam independent of the polarization of the incident beam. The metasurface consists of an array of sub-wavelength silicon cross resonators made of a high refractive index material on substrates such as sapphire and CaF$_2$ that are transparent at IR-THz spectral range. With these substrates, it is possible to create phase elements for a specific spectral range including at the molecular finger printing around 10$~μ$m as well as at longer THz wavelengths where secondary molecular structures can be revealed. This device offers high transmittance and a phase coverage of 0 to $2π$. The transmittance phase is tuned by varying the dimensions of the meta-atoms. To demonstrate wavefront engineering, we used a discretized spiraling phase profile to convert the incident Gaussian beam to vortex beam. To realize this, we divided the metasurface surface into eight angular sectors and chose eight different dimensions for the crosses providing successive phase shifts spaced by $π/4$ radians for each of these sectors. Photolithography and reactive ion etching (RIE) were used to fabricate these silicon crosses as the dimensions of these cylinders range up to few hundreds of micrometers. Large 1-cm-diameter optical elements were successfully fabricated and characterised by optical profilometry.

physics.optics

Engineering the axial intensity of Bessel beams

Bessel beams (BBs) appear immune to diffraction over finite propagation distances due to the conical nature of light propagation along the optical axis. This offers promising advantages in laser fabrication. However, BBs exhibit a significant intensity variation along the direction of propagation. We present a simple technique to engineer the axial intensity of the BB over centimeters-long propagation distances without expansion of the incoming laser beam. This method uses two diffractive optical elements (DOEs), one converts the input Gaussian intensity profile to an intermediate intensity distribution, which illuminates the second DOE, a binary axicon. BBs of desired axial intensity distribution over few centimeters length can be fabricated.

physics.optics