SearcharxivSearch

arXiv subjects

Sharon M. Morsink

Publications and source records attributed to Sharon M. Morsink.

At least 19 recordsLinked to original sources

The Impact of Errors in the Shape Function of Rotating Neutron Stars in the Oblate Schwarzschild Approximation

Measurements of thermal X-ray flux emitted by neutron stars can constrain their radii and the equation of state of cold dense matter. Accurate flux modeling of rapidly rotating neutron stars requires an approximation for their oblate surface shape, usually given by a shape function. We examine the accuracy of five shape functions by comparing them against numerical relativistic stellar surfaces for seven representative equations of state over a broad range of compactness and spin. We characterize their errors in the surface radius and their derivative with respect to colatitude, test the extent of quasi-universality, and propagate these errors into the differential solid angle dΩ, a geometric factor underlying the observed flux, under the oblate Schwarzschild approximation. We find that the shape functions produce distinct error patterns associated with their forms and parameter ranges. These errors remain structured in compactness, spin, and colatitude. Simple polynomial corrections substantially reduce the radius errors of several shape functions, with most corrected errors within approximately 0.5%. We show that errors in dΩ may be understood as coming from an area contribution, which scales with twice the relative radius error, and a projection contribution controlled primarily by the error in the surface derivative. The projection contribution grows towards the limb, where small surface errors can produce much larger local errors in dΩ. We provide a set of guidelines for the construction of improved quasi-universal shape functions that can be used in future radius estimation efforts. Our recommendations include that both the shape and its derivative be modeled accurately, that more accurate predictions of the polar radius be developed, and that the shape function be calibrated over the same compactness-spin range that is to be tested.

astro-ph.HE

Rotating Neutron Stars with Dark Matter Halos

If dark matter (DM) exists in halos around rotating neutron stars (NSs), it will be essential to understand the effects of rotation on the distribution of DM and baryonic matter (BM) in the stars to interpret observations. In this work, we construct rapidly rotating dark matter admixed neutron stars (DANS) with DM halos using the two-fluid approximation, where the BM and DM interact only through gravity. Our goal is to describe rapidly rotating millisecond-period DANS spun up by the accretion of BM from a zero angular momentum state. We extend the Rapidly Rotating Neutron Star (RNS) code to compute axisymmetric configurations in which the BM rotates rigidly while the DM remains torque-free and differentially rotates through the frame-dragging of spacetime. For the first time, we examine in detail local and global definitions of mass in general relativity for two-fluid systems, showing how their differences affect the interpretation of baryonic and dark component masses. We compute energy density and frame-dragging frequency profiles for DANS with three different characteristic DM halos. We demonstrate that rapid BM rotation reduces DM halo sizes if central energy densities are kept constant between non-rotating and rotating models. We also construct sequences of DANS to create mass and radius curves and compare rotating and non-rotating cases. Finally, we quantify deviations in the spacetime metric outside the baryonic surfaces of these sequences of stars caused by the DM halos. We hypothesize that the size of this quantity could indicate whether a DM halo will significantly impact X-ray pulse profile modeling. These results provide a framework for assessing the observational consequences of DM halos around rapidly rotating NSs.

astro-ph.HE

A NICER View of PSR J1231$-$1411: A Complex Case

Recent constraints on neutron star mass and radius have advanced our understanding of the equation of state (EOS) of cold dense matter. Some of them have been obtained by modeling the pulses of three millisecond X-ray pulsars observed by the Neutron Star Interior Composition Explorer (NICER). Here, we present a Bayesian parameter inference for a fourth pulsar, PSR J1231$-$1411, using the same technique with NICER and XMM-Newton data. When applying a broad mass-inclination prior from radio timing measurements and the emission region geometry model that can best explain the data, we find likely converged results only when using a limited radius prior. If limiting the radius to be consistent with the previous observational constraints and EOS analyses, we infer the radius to be $12.6 \pm 0.3$ km and the mass to be $1.04_{-0.03}^{+0.05}$ $M_\odot$, each reported as the posterior credible interval bounded by the $16\,\%$ and $84\,\%$ quantiles. If using an uninformative prior but limited between $10$ and $14$ km, we find otherwise similar results, but $R_{\mathrm{eq}} = 13.5_{-0.5}^{+0.3}$ km for the radius. In both cases, we find a nonantipodal hot region geometry where one emitting spot is at the equator or slightly above, surrounded by a large colder region, and where a noncircular hot region lies close to southern rotational pole. If using a wider radius prior, we only find solutions that fit the data significantly worse. We discuss the challenges in finding the better fitting solutions, possibly related to the weak interpulse feature in the pulse profile.

astro-ph.HE

Exploring Waveform Variations among Neutron Star Ray-tracing Codes for Complex Emission Geometries

Pulse Profile Modeling (PPM), the technique used to infer mass, radius and geometric parameters for rotation-powered millisecond pulsars using data from the Neutron Star Interior Composition Explorer (NICER), relies on relativistic ray-tracing of thermal X-ray photons from hot spots on the neutron star surface to the observer. To verify our ray-tracing codes we have in the past conducted cross-tests for simple hot spot geometries, focusing primarily on the implementation of the space-time model. In this paper, we present verification for test problems that explore the more complex hot spot geometries that are now being employed in the NICER PPM analyses. We conclude that the accuracy of our computed waveforms is in general sufficiently high for analyses of current NICER data sets. We have however identified some extreme configurations where extra care may be needed.

astro-ph.HE

The Radius of the High-mass Pulsar PSR J0740+6620 with 3.6 yr of NICER Data

We report an updated analysis of the radius, mass, and heated surface regions of the massive pulsar PSR J0740+6620 using Neutron Star Interior Composition Explorer (NICER) data from 2018 September 21 to 2022 April 21, a substantial increase in data set size compared to previous analyses. Using a tight mass prior from radio timing measurements and jointly modeling the new NICER data with XMM-Newton data, the inferred equatorial radius and gravitational mass are $12.49_{-0.88}^{+1.28}$ km and $2.073_{-0.069}^{+0.069}$ $M_\odot$ respectively, each reported as the posterior credible interval bounded by the $16\,\%$ and $84\,\%$ quantiles, with an estimated systematic error $\lesssim 0.1$ km. This result was obtained using the best computationally feasible sampler settings providing a strong radius lower limit but a slightly more uncertain radius upper limit. The inferred radius interval is also close to the $R=12.76_{-1.02}^{+1.49}$ km obtained by Dittmann et al., when they require the radius to be less than $16$ km as we do. The results continue to disfavor very soft equations of state for dense matter, with $R<11.15$ km for this high-mass pulsar excluded at the $95\,\%$ probability. The results do not depend significantly on the assumed cross-calibration uncertainty between NICER and XMM-Newton. Using simulated data that resemble the actual observations, we also show that our pipeline is capable of recovering parameters for the inferred models reported in this paper.

astro-ph.HE

Interpreting Mass and Radius Measurements of Neutron Stars with Dark Matter Halos

The high densities of neutron stars (NSs) could provide astrophysical locations for dark matter (DM) to accumulate. Depending on the DM model, these DM admixed NSs (DANSs) could have significantly different properties than pure baryonic NSs, accessible through X-ray observations of rotation-powered pulsars. We adopt the two-fluid formalism in general relativity to numerically simulate stable configurations of DANSs, assuming a fermionic equation of state (EOS) for the DM with repulsive self-interaction. The distribution of DM in the DANS as a halo affects the path of X-rays emitted from hot spots on the visible baryonic surface causing notable changes in the pulse profile observed by telescopes such as NICER, compared to pure baryonic NSs. We explore how various DM models affect the DM mass distribution, leading to different types of dark halos. We quantify the deviation in observed X-ray flux from stars with each of these halos. We identify the pitfalls in interpreting mass and radius measurements of NSs inferred from electromagnetic radiation and constraining the baryonic matter EOS, if these dark halos exist.

astro-ph.HE

A NICER View of the Nearest and Brightest Millisecond Pulsar: PSR J0437$\unicode{x2013}$4715

We report Bayesian inference of the mass, radius and hot X-ray emitting region properties - using data from the Neutron Star Interior Composition ExploreR (NICER) - for the brightest rotation-powered millisecond X-ray pulsar PSR J0437$\unicode{x2013}$4715. Our modeling is conditional on informative tight priors on mass, distance and binary inclination obtained from radio pulsar timing using the Parkes Pulsar Timing Array (PPTA) (Reardon et al. 2024), and we use NICER background models to constrain the non-source background, cross-checking with data from XMM-Newton. We assume two distinct hot emitting regions, and various parameterized hot region geometries that are defined in terms of overlapping circles; while simplified, these capture many of the possibilities suggested by detailed modeling of return current heating. For the preferred model identified by our analysis we infer a mass of $M = 1.418 \pm 0.037$ M$_\odot$ (largely informed by the PPTA mass prior) and an equatorial radius of $R = 11.36^{+0.95}_{-0.63}$ km, each reported as the posterior credible interval bounded by the 16% and 84% quantiles. This radius favors softer dense matter equations of state and is highly consistent with constraints derived from gravitational wave measurements of neutron star binary mergers. The hot regions are inferred to be non-antipodal, and hence inconsistent with a pure centered dipole magnetic field.

astro-ph.HE

A More Precise Measurement of the Radius of PSR J0740+6620 Using Updated NICER Data

PSR J0740+6620 is the neutron star with the highest precisely determined mass, inferred from radio observations to be $2.08\pm0.07\,\rm M_\odot$. Measurements of its radius therefore hold promise to constrain the properties of the cold, catalyzed, high-density matter in neutron star cores. Previously, Miller et al. (2021) and Riley et al. (2021) reported measurements of the radius of PSR J0740+6620 based on Neutron Star Interior Composition Explorer (NICER) observations accumulated through 17 April 2020, and an exploratory analysis utilizing NICER background estimates and a data set accumulated through 28 December 2021 was presented in Salmi et al. (2022). Here we report an updated radius measurement, derived by fitting models of X-ray emission from the neutron star surface to NICER data accumulated through 21 April 2022, totaling $\sim1.1$ Ms additional exposure compared to the data set analyzed in Miller et al. (2021) and Riley et al. (2021), and to data from X-ray Multi-Mirror (XMM-Newton) observations. We find that the equatorial circumferential radius of PSR J0740+6620 is $12.92_{-1.13}^{+2.09}$ km (68% credibility), a fractional uncertainty $\sim83\%$ the width of that reported in Miller et al. (2021), in line with statistical expectations given the additional data. If we were to require the radius to be less than 16 km, as was done in Salmi et al. (2024), then our 68% credible region would become $R=12.76^{+1.49}_{-1.02}$ km, which is close to the headline result of Salmi et al. (2024). Our updated measurements, along with other laboratory and astrophysical constraints, imply a slightly softer equation of state than that inferred from our previous measurements.

astro-ph.HE

Atmospheric Effects on Neutron Star Parameter Constraints with NICER

We present an analysis of the effects of uncertainties in the atmosphere models on the radius, mass, and other neutron star parameter constraints for the NICER observations of rotation-powered millisecond pulsars. To date, NICER has applied the X-ray pulse profile modeling technique to two millisecond-period pulsars: PSR J0030+0451 and the high-mass pulsar PSR J0740+6620. These studies have commonly assumed a deep-heated, fully ionized hydrogen atmosphere model, although they have explored the effects of partial-ionization and helium composition in some cases. Here, we extend that exploration and also include new models with partially ionized carbon composition, externally heated hydrogen, and an empirical atmospheric beaming parameterization to explore deviations in the expected anisotropy of the emitted radiation. None of the studied atmosphere cases have any significant influence on the inferred radius of PSR J0740+6620, possibly due to its X-ray faintness, tighter external constraints, and/or viewing geometry. In the case of PSR J0030+0451, both the composition and ionization state could significantly alter the inferred radius. However, based on the evidence (prior predictive probability of the data), partially ionized hydrogen and carbon atmospheres are disfavored. The difference in the evidence for ionized hydrogen and helium atmospheres is too small to be decisive for most cases, but the inferred radius for helium models trends to larger sizes around or above 14-15 km. External heating or deviations in the beaming that are less than $5\,\%$ at emission angles smaller than 60 degrees, on the other hand, have no significant effect on the inferred radius.

astro-ph.HE

An updated mass-radius analysis of the 2017-2018 NICER data set of PSR J0030+0451

In 2019 the NICER collaboration published the first mass and radius inferred for PSR J0030+0451, thanks to NICER observations, and consequent constraints on the equation of state characterising dense matter. Two independent analyses found a mass of $\sim 1.3-1.4\,\mathrm{M_\odot}$ and a radius of $\sim 13\,$km. They also both found that the hot spots were all located on the same hemisphere, opposite to the observer, and that at least one of them had a significantly elongated shape. Here we reanalyse, in greater detail, the same NICER data set, incorporating the effects of an updated NICER response matrix and using an upgraded analysis framework. We expand the adopted models and jointly analyse also XMM-Newton data, which enables us to better constrain the fraction of observed counts coming from PSR J0030+0451. Adopting the same models used in previous publications, we find consistent results, although with more stringent inference requirements. We also find a multi-modal structure in the posterior surface. This becomes crucial when XMM-Newton data is accounted for. Including the corresponding constraints disfavors the main solutions found previously, in favor of the new and more complex models. These have inferred masses and radii of $\sim [1.4 \mathrm{M_\odot}, 11.5$ km] and $\sim [1.7 \mathrm{M_\odot}, 14.5$ km], depending on the assumed model. They display configurations that do not require the two hot spots generating the observed X-rays to be on the same hemisphere, nor to show very elongated features, and point instead to the presence of temperature gradients and the need to account for them.

astro-ph.HE

The Radius of PSR J0740+6620 from NICER with NICER Background Estimates

We report a revised analysis for the radius, mass, and hot surface regions of the massive millisecond pulsar PSR J0740+6620, studied previously with joint fits to NICER and XMM-Newton data by Riley et al. (2021) and Miller et al. (2021). We perform a similar Bayesian estimation for the pulse-profile model parameters, except that instead of fitting simultaneously the XMM-Newton data, we use the best available NICER background estimates to constrain the number of photons detected from the source. This approach eliminates any potential issues in the cross-calibration between these two instruments, providing thus an independent check of the robustness of the analysis. The obtained neutron star parameter constraints are compatible with the already published results, with a slight dependence on how conservative the imposed background limits are. A tighter lower limit causes the inferred radius to increase, and a tighter upper limit causes it to decrease. We also extend the study of the inferred emission geometry to examine the degree of deviation from antipodality of the hot regions. We show that there is a significant offset to an antipodal spot configuration, mainly due to the non-half-cycle azimuthal separation of the two emitting spots. The offset angle from the antipode is inferred to be above 25 degrees with 84% probability. This seems to exclude a centered-dipolar magnetic field in PSR J0740+6620.

astro-ph.HE

Universal Relations for the Increase in the Mass and Radius of a Rotating Neutron Star

Rotation causes an increase in a neutron star's mass and equatorial radius. The mass and radius depend sensitively on the unknown equation of state (EOS) of cold, dense matter. However, the increases in mass and radius due to rotation are almost independent of the EOS. The EOS independence leads to the idea of neutron star universality. In this paper, we compute sequences of rotating neutron stars with constant central density. We use a collection of randomly generated EOS to construct simple correction factors to the mass and radius computed from the equations of hydrostatic equilibrium for non-rotating neutron stars. The correction factors depend only on the non-rotating star's mass and radius and are almost independent of the EOS. This makes it computationally inexpensive to include observations of rotating neutron stars in EOS inference codes. We also construct a mapping from the measured mass and radius of a rotating neutron star to a corresponding non-rotating star. The mapping makes it possible to construct a zero-spin mass-radius curve if the masses and radii of many neutron stars with different spins are measured. We show that the changes in polar and equatorial radii are symmetric, in that the polar radius shrinks at the same rate that the equatorial radius grows. This symmetry is related to the observation that the equatorial compactness (the ratio of mass to radius) is almost constant on one of the constant-density sequences.

astro-ph.HE

A NICER View of the Massive Pulsar PSR J0740+6620 Informed by Radio Timing and XMM-Newton Spectroscopy

We report on Bayesian estimation of the radius, mass, and hot surface regions of the massive millisecond pulsar PSR J0740$+$6620, conditional on pulse-profile modeling of Neutron Star Interior Composition Explorer X-ray Timing Instrument (NICER XTI) event data. We condition on informative pulsar mass, distance, and orbital inclination priors derived from the joint NANOGrav and CHIME/Pulsar wideband radio timing measurements of arXiv:2104.00880. We use XMM European Photon Imaging Camera spectroscopic event data to inform our X-ray likelihood function. The prior support of the pulsar radius is truncated at 16 km to ensure coverage of current dense matter models. We assume conservative priors on instrument calibration uncertainty. We constrain the equatorial radius and mass of PSR J0740$+$6620 to be $12.39_{-0.98}^{+1.30}$ km and $2.072_{-0.066}^{+0.067}$ M$_{\odot}$ respectively, each reported as the posterior credible interval bounded by the 16% and 84% quantiles, conditional on surface hot regions that are non-overlapping spherical caps of fully-ionized hydrogen atmosphere with uniform effective temperature; a posteriori, the temperature is $\log_{10}(T$ [K]$)=5.99_{-0.06}^{+0.05}$ for each hot region. All software for the X-ray modeling framework is open-source and all data, model, and sample information is publicly available, including analysis notebooks and model modules in the Python language. Our marginal likelihood function of mass and equatorial radius is proportional to the marginal joint posterior density of those parameters (within the prior support) and can thus be computed from the posterior samples.

astro-ph.HE

Constraining the Neutron Star Mass--Radius Relation and Dense Matter Equation of State with NICER. III. Model Description and Verification of Parameter Estimation Codes

We describe the X-ray pulse profile models we use, and how we use them, to analyze Neutron Star Interior Composition Explorer (NICER) observations of rotation-powered millisecond pulsars to obtain information about the mass-radius relation of neutron stars and the equation of state of the dense matter in their cores. Here we detail our modeling of the observed profile of PSR J0030+0451 that we analyzed in Miller et al. (2019) and Riley et al. (2019) and describe a cross-verification of computations of the pulse profiles of a star with R/M 3, in case stars this compact need to be considered in future analyses. We also present our early cross-verification efforts of the parameter estimation procedures used by Miller et al. (2019) and Riley et al. (2019) by analyzing two distinct synthetic data sets. Both codes yielded credible regions in the mass-radius plane that are statistically consistent with one another and both gave posterior distributions for model parameter values consistent with the values that were used to generate the data. We also summarize the additional tests of the parameter estimation procedure of Miller et al. (2019) that used synthetic pulse profiles and the NICER pulse profile of PSR J0030+0451. We then illustrate how the precision of mass and radius estimates depends on the pulsar's spin rate and the size of its hot spot by analyzing four different synthetic pulse profiles. Finally, we assess possible sources of systematic error in these estimates made using this technique, some of which may warrant further investigation.

astro-ph.HE

A NICER View of PSR J0030+0451: Millisecond Pulsar Parameter Estimation

We report on Bayesian parameter estimation of the mass and equatorial radius of the millisecond pulsar PSR J0030$+$0451, conditional on pulse-profile modeling of Neutron Star Interior Composition Explorer (NICER) X-ray spectral-timing event data. We perform relativistic ray-tracing of thermal emission from hot regions of the pulsar's surface. We assume two distinct hot regions based on two clear pulsed components in the phase-folded pulse-profile data; we explore a number of forms (morphologies and topologies) for each hot region, inferring their parameters in addition to the stellar mass and radius. For the family of models considered, the evidence (prior predictive probability of the data) strongly favors a model that permits both hot regions to be located in the same rotational hemisphere. Models wherein both hot regions are assumed to be simply-connected circular single-temperature spots, in particular those where the spots are assumed to be reflection-symmetric with respect to the stellar origin, are strongly disfavored. For the inferred configuration, one hot region subtends an angular extent of only a few degrees (in spherical coordinates with origin at the stellar center) and we are insensitive to other structural details; the second hot region is far more azimuthally extended in the form of a narrow arc, thus requiring a larger number of parameters to describe. The inferred mass $M$ and equatorial radius $R_\mathrm{eq}$ are, respectively, $1.34_{-0.16}^{+0.15}$ M$_{\odot}$ and $12.71_{-1.19}^{+1.14}$ km, whilst the compactness $GM/R_\mathrm{eq}c^2 = 0.156_{-0.010}^{+0.008}$ is more tightly constrained; the credible interval bounds reported here are approximately the $16\%$ and $84\%$ quantiles in marginal posterior mass.

astro-ph.HE

Constraining the Neutron Star Mass-Radius Relation and Dense Matter Equation of State with NICER. II. Emission from Hot Spots on a Rapidly Rotating Neutron Star

We describe the model of surface emission from a rapidly rotating neutron star that is applied to Neutron Star Interior Composition Explorer X-ray data of millisecond pulsars in order to statistically constrain the neutron star mass-radius relation and dense matter equation of state. To ensure that the associated calculations are both accurate and precise, we conduct an extensive suite of verification tests between our numerical codes for both the Schwarzschild + Doppler and Oblate Schwarzschild approximations, and compare both approximations against exact numerical calculations. We find superb agreement between the code outputs, as well as in comparison against a set of analytical and semi-analytical calculations, which combined with their speed, demonstrates that the codes are well-suited for large-scale statistical sampling applications. A set of verified, high-precision reference synthetic pulse profiles is provided to the community to facilitate testing of other independently developed codes.

astro-ph.HE

Rotational Corrections to Neutron-Star Radius Measurements from Thermal Spectra

We calculate the rotational broadening in the observed thermal spectra of neutron stars spinning at moderate rates in the Hartle-Thorne approximation. These calculations accurately account for the effects of the second-order Doppler boosts as well as for the oblate shapes and the quadrupole moments of the neutron stars. We find that fitting the spectra and inferring the bolometric fluxes under the assumption that a star is not rotating causes an underestimate of the inferred fluxes and, thus, radii. The correction depends on the stellar spin, radius, and observer's inclination. For a 10 km neutron star spinning at 600 Hz, the rotational correction to the flux is ~1-4%, while for a 15 km neutron star with the same spin period, the correction ranges from 2% for pole-on sources to 12% for edge-on sources. We calculate the inclination-averaged corrections to inferred radii as a function of the neutron-star radius and mass and provide an empirical formula for the corrections. For realistic neutron star parameters (1.4 M$_\odot$, 12 km, 600 Hz), the stellar radius is on the order of 4% larger than the radius inferred under the assumption that the star is not spinning.

astro-ph.HE

Universality of the Acceleration Due to Gravity on the Surface of a Rapidly Rotating Neutron Star

On the surface of a rapidly rotating neutron star, the effective centrifugal force decreases the effective acceleration due to gravity (as measured in the rotating frame) at the equator while increasing the acceleration at the poles due to the centrifugal flattening of the star into an oblate spheroid. We compute the effective gravitational acceleration for relativistic rapidly rotating neutron stars and show that for a star with mass $M$, equatorial radius $R_e$, and angular velocity $Ω$, the deviations of the effective acceleration due to gravity from the nonrotating case take on a universal form that depends only on the compactness ratio $M/R_e$, the dimensionless square of the angular velocity $Ω^2R_e^3/GM$, and the latitude on the star's surface. This dependence is universal, in that it has very little dependence on the neutron star's equation of state. The effective gravity is expanded in the slow rotation limit to show the dependence on the effective centrifugal force, oblate shape of the star and the quadrupole moment of the gravitational field. In addition, an empirical fit and simple formula for the effective gravity is found. We find that the increase in the acceleration due to gravity at the poles is of the same order of magnitude as the decrease in the effective acceleration due to gravity at the equator for all realistic value of mass, radius and spin. For neutron stars that spin with frequencies near 600 Hz the difference between the effective gravity at the poles and the equator is about 20%.

astro-ph.HE