arXiv subjects

Sheeraz Athar

Publications and source records attributed to Sheeraz Athar.

5 recordsLinked to original sources

arXiv2026

MVP-Tac: A Miniaturized Dual-Modal Vision and Photoelastic Tactile Sensor for Robot-Assisted Minimally Invasive Surgery

Robot-assisted minimally invasive surgery (RMIS) offers major benefits over open and conventional laparoscopic procedures, yet it still lacks tactile feedback for palpation while operating under strict requirements to preserve reliable vision for navigation and safety. In practice, visual feedback is indispensable, and tactile solutions that cannot coexist with vision are difficult to translate into RMIS tools. To address both needs, we introduce MVP-Tac, a compact, vision-based tactile sensor that provides co-located vision and tactile sensing. MVP-Tac uses reflective photoelastic imaging: a thin photoelastic elastomer produces stress-dependent interferograms under contact that are captured by an embedded camera through a miniaturized reflective polariscope. A semi-transparent membrane and controllable illumination enable switching between visual mode and tactile mode, enabling tactile perception without sacrificing vision. We validate MVP-Tac through force calibration in the 0 to 2 N range and demonstrate its potential for tumor palpation via video-based hardness classification on tissue phantoms, achieving 97% accuracy for exposed-tumor classification and 92% accuracy for subdermal-tumor classification. Finally, we conduct a simulated colonoscopy to validate both visual and tactile modalities in a constrained lumen, including vision-guided 3D photomapping of the luminal wall and in situ hardness classification of localized nodules. Overall, MVP-Tac provides a practical path toward restoring clinically useful palpation in RMIS while maintaining essential visual feedback. The design, fabrication, and firmware of MVP-Tac are open-sourced at https://mvp-tac.github.io/

cs.RO↗

arXiv2026

VTAP Gripper: Synergizing Fingertip Sensing and a Visuo-Tactile Active Palm for Dexterous In-Hand Manipulation

This paper presents a tactile-reactive gripper that integrates a Visuo-Tactile Active Palm (VTAP) and compliant, reconfigurable fingers equipped with tactile array sensors. The design exploits structured finger-palm synergy and multi-modal perception to achieve both robust grasping and fine manipulation. The actuated bi-modal palm seamlessly combines long-range visual localization with contact-rich tactile feedback, substantially extending the system's manipulation capability. To bridge the embodiment gap between human hand motion and the heterogeneous three-finger structure, we further propose a staged, gesture-conditioned retargeting framework for dexterous teleoperation. Extensive experiments validate the system across a range of challenging tasks: reactive grasping of YCB and fragile objects, in-hand syringe reorientation and plunger actuation, singulation of clustered objects down to 3 mm in diameter, and vision-tactile peg-in-hole insertion. Results demonstrate that high manipulation performance can be achieved through coordinated finger-palm interaction and multi-modal sensing, without resorting to high degrees of freedom anthropomorphic designs. The VTAP gripper and its retargeting framework offer a practical reference architecture for dexterous gripper design, manipulation, and contact-rich data collection in support of learning-based approaches. Project webpage: https://yuhochau.github.io/vtap/.

cs.RO↗

arXiv2026

MuxGel: Simultaneous Dual-Modal Visuo-Tactile Sensing via Spatially Multiplexing and Deep Reconstruction

High-fidelity visuo-tactile sensing is important for precise robotic manipulation, yet most vision-based tactile sensors rely on opaque coatings that enable tactile sensing but block direct visual observation. We propose MuxGel, a spatially multiplexed sensor that captures both external visual information and contact-induced tactile signals through a single camera. By using a checkerboard coating pattern, MuxGel interleaves tactile-sensitive regions with transparent windows for external vision. This design maintains standard form factors, allowing for plug-and-play integration into GelSight-style sensors by simply replacing the gel pad. To recover dense visual and tactile signals from the multiplexed inputs, we develop a U-Net-based reconstruction framework trained with a sim-to-real pipeline. Experiments on unseen objects demonstrate the framework's generalization and accuracy. We further demonstrate MuxGel in grasping tasks, where visual feedback supports alignment and tactile feedback supports contact interaction. Results show that MuxGel enables single-camera dual-modal sensing within a GelSight-style implementation, providing local visual feedback and reconstructed tactile feedback with potential extension to other optical tactile sensors. Project webpage: https://zhixianhu.github.io/muxgel/.

cs.RO↗

arXiv2023

Origami-inspired Bi-directional Actuator with Orthogonal Actuation

Origami offers a promising alternative for designing innovative soft robotic actuators. While features of origami, such as bi-directional motion and structural anisotropy, haven't been extensively explored in the past, this letter presents a novel design inspired by origami tubes for a bi-directional actuator. This actuator is capable of moving in two orthogonal directions and has separate channels throughout its body to control each movement. We introduce a bottom-up design methodology that can also be adapted for other complex movements. The actuator was manufactured using popular 3D printing techniques. To enhance its durability, we experimented with different 3D printing technologies and materials. The actuator's strength was further improved using silicon spin coating, and we compared the performance of coated, uncoated, and silicon-only specimens. The material model was empirically derived by testing specimens on a universal testing machine (UTM). Lastly, we suggest potential applications for these actuators, such as in quadruped robots.

cs.RO↗

arXiv2020

Vacuum Driven Auxetic Switching Structure and Its Application on a Gripper and Quadruped

The properties and applications of auxetics have been widely explored in the past years. Through proper utilization of auxetic structures, designs with unprecedented mechanical and structural behaviors can be produced. Taking advantage of this, we present the development of novel and lowcost 3D structures inspired by a simple auxetic unit. The core part, which we call the body in this paper, is a 3D realization of 2D rotating squares. This body structure was formed by joining four similar structures through softer material at the vertices. A monolithic structure of this kind is accomplished through a custom-built multi-material 3D printer. The model works in a way that, when torque is applied along the face of the rotational squares, they tend to bend at the vertex of the softer material, and due to the connected-ness of the design, a proper opening and closing motion is achieved. To demonstrate the potential of this part as an important component for robots, two applications are presented: a soft gripper and a crawling robot. Vacuum-driven actuators move both the applications. The proposed gripper combines the benefits of two types of grippers whose fingers are placed parallel and equally spaced to each other, in a single design. This gripper is adaptable to the size of the object and can grasp objects with large and small cross-sections alike. A novel bending actuator, which is made of soft material and bends in curvature when vacuumed, provides the grasping nature of the gripper. Crawling robots, in addition to their versatile nature, provide a better interaction with humans. The designed crawling robot employs negative pressure-driven actuators to highlight linear and turning locomotion.

cs.RO↗