arXiv subjects

Sheng Meng

Publications and source records attributed to Sheng Meng.

At least 145 records · Page 8Linked to original sources

arXiv2017

Dirac fermions in borophene

Honeycomb structures of group IV elements can host massless Dirac fermions with non-trivial Berry phases. Their potential for electronic applications has attracted great interest and spurred a broad search for new Dirac materials especially in monolayer structures. We present a detailed investigation of the β12 boron sheet, which is a borophene structure that can form spontaneously on a Ag(111) surface. Our tight-binding analysis revealed that the lattice of the β12-sheet could be decomposed into two triangular sublattices in a way similar to that for a honeycomb lattice, thereby hosting Dirac cones. Furthermore, each Dirac cone could be split by introducing periodic perturbations representing overlayer-substrate interactions. These unusual electronic structures were confirmed by angle-resolved photoemission spectroscopy and validated by first-principles calculations. Our results suggest monolayer boron as a new platform for realizing novel high-speed low-dissipation devices.

cond-mat.mtrl-sci↗

arXiv2016

$\textit{Ab initio}$ evidence for nonthermal characteristics in ultrafast laser melting

Laser melting of semiconductors has been observed for almost 40 years; surprisingly, it is not well understood where most theoretical simulations show a laser-induced thermal process. $\textit{Ab initio}$ nonadiabatic simulations based on real-time time-dependent density functional theory reveal intrinsic nonthermal melting of silicon, at a temperature far below the thermal melting temperature of 1680 K. Both excitation threshold and time evolution of diffraction intensity agree well with experiment. Nonthermal melting is attributed to excitation-induced drastic changes in bonding electron density, and the subsequent decrease in the melting barrier, rather than lattice heating as previously assumed in the two-temperature models.

cond-mat.mtrl-sci↗

arXiv2016

Direct Evidence of Metallic Bands in a Monolayer Boron Sheet

The search for metallic boron allotropes has attracted great attention in the past decades and recent theoretical works predict the existence of metallicity in monolayer boron. Here, we synthesize the \b{eta}12-sheet monolayer boron on a Ag(111) surface and confirm the presence of metallic boron-derived bands using angle-resolved photoemission spectroscopy. The Fermi surface is composed of one electron pocket at the S point and a pair of hole pockets near the X point, which is supported by the first-principles calculations. The metallic boron allotrope in \b{eta}12 sheet opens the way to novel physics and chemistry in material science.

cond-mat.mtrl-sci↗

arXiv2016

Magnetic Dirac Fermions and Chern Insulator Supported on Pristine Silicon Surface

Emergence of ferromagnetism in non-magnetic semiconductors is strongly desirable, especially in topological materials thanks to the possibility to achieve quantum anomalous Hall effect. Based on first-principles calculations, we propose that for Si thin film grown on metal substrate, the pristine Si(111)-root3xroot3 surface with a spontaneous weak reconstruction has a strong tendency of ferromagnetism and nontrivial topological properties, characterized by spin polarized Dirac-fermion surface states. In contrast to conventional routes relying on introduction of alien charge carriers or specially patterned substrates, the spontaneous magnetic order and spin-orbit coupling on the pristine silicon surface together gives rise to quantized anomalous Hall effect with a finite Chern number C=-1. This work suggests exciting opportunities in silicon-based spintronics and quantum computing free from alien dopants or proximity effects.

cond-mat.mes-hall↗

arXiv2015

Experimental Realization of Two-Dimensional Boron Sheets

Boron is the fifth element in the periodic table and possesses rich chemistry second only to carbon. A striking feature of boron is that B12 icosahedral cages occur as the building blocks in bulk boron and many boron compounds. This is in contrast to its neighboring element, carbon, which prefers 2D layered structure (graphite) in its bulk form. On the other hand, boron clusters of medium size have been predicted to be planar or quasi-planar, such as B12+ , B13+, B19-, B36, and so on. This is also in contrast to carbon clusters which exhibit various cage structures (fullerenes). Therefore, boron and carbon can be viewed as a set of complementary chemical systems in their bulk and cluster structures. Now, with the boom of graphene, an intriguing question is that whether boron can also form a monoatomic-layer 2D sheet structure? Here, we report the first successful experimental realization of 2D boron sheets. We have revealed two types of boron sheet structures, corresponding to a triangular boron lattice with different arrangements of the hexagonal holes. Moreover, our boron sheets were found to be relatively stable against oxidization, and interacts only weekly with the substrate. The realization of such a long expected 2D boron sheet could open a door toward boron electronics, in analogous to the carbon electronics based on graphene.

cond-mat.mes-hall↗

arXiv2015

Phosphorene and Doped Monolayers Interfaced TiO$_2$ with Type-II Band Alignments: Novel Excitonic Solar Cells

Phosphorene, a new elemental two dimensional (2D) material recently isolated by mechanical exfoliation, holds the feature of a direct band gap of around 2.0 eV, overcoming graphene's weaknesses (zero band gap) to realize the potential application in optoelectronic devices. Constructing van der Waals heterostructures is an efficient approach to modulate the band structure, to advance the charge separation efficiency, and thus to optimize the optoelectronic properties. Here, we theoretically investigated three type-II heterostructures based on perfect phosphorene and its doped monolayers interfaced with TiO$_2$(110) surface. Doping in phosphorene has a tunability on built-in potential, charge transfer, light absorbance, as well as electron dynamics, which helps to optimize the light absorption efficiency. Three excitonic solar cells (XSCs) based on the phosphorene$-$TiO$_2$ heterojunctions have been proposed, which exhibit high power conversion efficiencies dozens of times higher than conventional solar cells, comparable to MoS$_2$/WS$_2$ XSC. The nonadiabatic molecular dynamics within the time-dependent density functional theory framework shows ultrafast electron transfer time of 6.1$-$10.8 fs, and slow electron$-$hole recombination of 0.58$-$1.08 ps, yielding $>98\%$ quantum efficiency for charge separation, further guaranteeing the practical power conversion efficiencies in XSC.

cond-mat.mtrl-sci↗

arXiv2015

Mechanism and modulation of terahertz generation from a semimetal - graphite

Semi-metals might offer a stronger interaction and a better confinement for terahertz wave than semiconductors, while preserve tunability. Particularly, graphene-based materials are envisioned as terahertz modulators, filters and ultra-broadband sources. However, the understanding of terahertz generation from those materials is still not clear, thus limits us recognizing the potential and improving device performances. Graphite, the mother material of graphene and a typical bulk semi-metal, is a good system to study semi-metals and graphene-based materials. Here we experimentally modulate and maximize the terahertz signal from graphite surface, thus reveal the mechanism - surface field driving photon induced carriers into transient current to radiate terahertz wave. We also discuss the differences between graphite and semiconductors; particularly graphite shows no temperature dependency from room temperature to 80C. Above knowledge will help us understand terahertz generations, achieve maximum output and electric modulation, in semi-metal or graphene based devices.

physics.optics↗

arXiv2015

From Silicene to Half-Silicane by Hydrogenation

Graphane is graphene fully hydrogenated from both sides, forming a 1x1 structure, where all C atoms are in sp3 configuration. In silicene, the Si atoms are in a mix-sp2/sp3 configuration, it is therefore natural to imagine silicane in analogue to graphane. However, monoatomic silicene sheet grown on substrates generally reconstructs into different phases, and only partially hydrogenated silicene with reconstructions had been reported before. In this report we produce half-silicane, where one Si sublattice is fully H-saturated and the other sublattice is intact, forming a perfect 1x1 structure. By hydrogenating various silicene phases on Ag(111) substrate, we found that only the (2r3x2r3)R30° phase can produce half-silicane. Interestingly, this phase was previous considered to be a highly defective or incomplete silicene structure. Our results indicate that the structure of (2r3x2r3)R30° phase involves a complete silicene-1x1 lattice instead of defective fragments, and the formation mechanism of half-silicane was discussed with the help of first principles calculations.

cond-mat.mtrl-sci↗

arXiv2015

Structure and Quantum Well States in Silicene Nanoribbons on Ag(110)

We have performed scanning tunneling microscopy/spectroscopy (STM/STS) study and first-principles calculations to investigate the atomic structure and electronic properties of silicon nanoribbons (SiNRs) grown on Ag(110). Despite of the extensive research on SiNRs in the last decades, its atomic structure is still not fully understood so far. In this report we determine that the structure of SiNRs/Ag(110) is armchair silicene nanoribbon with reconstructed edges. Meanwhile, pronounced quantum well states (QWS) in SiNRs were observed and their energy spectrum was systematically measured. The QWS are due to the confinement of quasiparticles perpendicular to the nanoribbon and can be well explained by the theory of one-dimensional (1D) 'particle-in-a-box' model in quantum mechanics.

cond-mat.mtrl-sci↗

arXiv2014

Ampleness of canonical divisors of hyperbolic normal projective varieties

Let X be a projective variety which is algebraic Lang hyperbolic. We show that Lang's conjecture holds (one direction only): X and all its subvarieties are of general type and the canonical divisor K_X is ample at smooth points and Kawamata log terminal points of X, provided that K_X is Q-Cartier, no Calabi-Yau variety is algebraic Lang hyperbolic and a weak abundance conjecture holds.

math.AG↗

arXiv2014

Atomic Scale Investigation of Dye Sensitized Solar Cells_Interface Structure and Dynamics

Dye-sensitized solar cells (DSC), built upon organic/inorganic hybrid materials, are promising third generation solar cells, which attract wide attentions due to their low-cost, flexibility and environment-friendly properties. We review recent progresses in DSC research, focusing on atomic-scale investigations of the interface electronic structures and dynamical processes, including dye adsorption structure onto TiO2, ultrafast electron injection, hot-electron injection, multiple-exciton generation and electron-hole recombination. We briefly summarize advanced experimental techniques and theoretical approaches investigating these interface electronic properties and dynamics, and then introduce progressive achievements in the photovoltaic device optimization based on insights obtained from atomic scale investigations. Finally, some challenges and opportunities for further improvement of dye solar cells are presented.

cond-mat.mtrl-sci↗

arXiv2013

Observation of Dirac cone warping and chirality effects in silicene

We performed low temperature scanning tunneling microscopy (STM) and spectroscopy (STS) studies on the electronic properties of (R3xR3)R30° phase of silicene on Ag(111) surface. We found the existence of Dirac Fermion chirality through the observation of -1.5 and -1.0 power law decay of quasiparticle interference (QPI) patterns. Moreover, in contrast to the trigonal warping of Dirac cone in graphene, we found that the Dirac cone of silicene is hexagonally warped, which is further confirmed by density functional calculations and explained by the unique superstructure of silicene. Our results demonstrate that the (R3xR3)R30° phase is an ideal system to investigate the unique Dirac Fermion properties of silicene.

cond-mat.mes-hall↗

arXiv2013

Ideal Desalination through Graphyne-4 Membrane: Nanopores for Quantized Water Transport

Graphyne-4 sheet exhibits promising potential for nanoscale desalination to achieve both high water permeability and salt rejection rate. Extensive molecular dynamics simulations on pore-size effects suggest that graphyne-4, with 4 acetylene bonds between two adjacent phenyl rings, has the best performance with 100% salt rejection and an unprecedented water permeability, to our knowledge, of ~13L/cm2/day/MPa, about 10 times higher than the state-of-the-art nanoporous graphene reported previously (Nano Lett.s 2012, 12, 3602-3608). In addition, the membrane entails very low energy consumption for producing 1m3 of fresh water, i.e., 3.6e-3 kWh/m3, three orders of magnitude less than the prevailing commercial membranes based on reverse osmosis. Water flow rate across the graphyne-4 sheet exhibits intriguing nonlinear dependence on the pore size owing to the quantized nature of water flow at the nanoscale. Such novel transport behavior has important implications to the design of highly effective and efficient desalination membranes.

cond-mat.mtrl-sci↗

arXiv2012

Spontaneous Symmetry Breaking and Dynamic Phase Transition in Monolayer Silicene

The (r3xr3)R30° honeycomb of silicene monolayer on Ag(111) was found to undergo a phase transition to two types of mirror-symmetric boundary-separated rhombic phases at temperatures below 40 K by scanning tunneling microscopy. The first-principles calculations reveal that weak interactions between silicene and Ag(111) drive the spontaneous ultra buckling in the monolayer silicene, forming two energy-degenerate and mirror-symmetric (r3xr3)R30° rhombic phases, in which the linear band dispersion near Dirac point (DP) and a significant gap opening (150 meV) at DP were induced. The low transition barrier between these two phases enables them interchangeable through dynamic flip-flop motion, resulting in the (r3xr3)R30° honeycomb structure observed at high temperature.

cond-mat.mes-hall↗

arXiv2012

Self-Assembly of Glycine on Cu (001): the Tales of Polarity and Temperature

Glycine on Cu(001) is used as an example to illustrate the critical role of molecular polarity and finite temperature effect in self-assembly of biomolecules at a metal surface. A unified picture for glycine self-assembly on Cu(001) is derived based on full polarity compensation considerations, implemented as a generic rule. Temperature plays a non-trivial role: the ground-state structure at 0 K is absent at room temperature, where intermolecular hydrogen bonding overweighs competing molecule-substrate interactions. The unique p(2X4) structure from the rule is proved as the most stable one by ab initio molecular dynamics at room temperature, and its STM images and anisotropic free-electron-like dispersion are in excellent agreement with experiments. Moreover, the rich self-assembling patterns including the heterochiral and homochiral phases, and their interrelationships are entirely governed by the same mechanism.

cond-mat.mtrl-sci↗

arXiv2012

Evidence for Dirac Fermions in a honeycomb lattice based on silicon

Silicene, a sheet of silicon atoms in a honeycomb lattice, was proposed to be a new Dirac-type electron system similar as graphene. We performed scanning tunneling microscopy and spectroscopy studies on the atomic and electronic properties of silicene on Ag(111). An unexpected $\sqrt{3}\times \sqrt{3}$ reconstruction was found, which is explained by an extra-buckling model. Pronounced quasi-particle interferences (QPI) patterns, originating from both the intervalley and intravalley scattering, were observed. From the QPI patterns we derived a linear energy-momentum dispersion and a large Fermi velocity, which prove the existence of Dirac Fermions in silicene.

cond-mat.mes-hall↗

arXiv2012

Evidence of silicene in honeycomb structures of silicon on Ag(111)

In the search for evidence of silicene, a two-dimensional honeycomb lattice of silicon, it is important to obtain a complete picture for the evolution of Si structures on Ag(111), which is believed to be the most suitable substrate for growth of silicene so far. In this work we report the finding and evolution of several monolayer superstructures of silicon on Ag(111) depending on the coverage and temperature. Combined with first-principles calculations, the detailed structures of these phases have been illuminated. These structure were found to share common building blocks of silicon rings, and they evolve from a fragment of silicene to a complete monolayer silicene and multilayer silicene. Our results elucidate how silicene formes on Ag(111) surface and provide methods to synthesize high-quality and large-scale silicene.

cond-mat.mtrl-sci↗

arXiv2011

Reversible Transition Between Thermodynamically Stable Phases with Low Density of Oxygen Vacancies on SrTiO$_3$(110) Surface

The surface reconstruction of SrTiO$_3$(110) is studied with scanning tunneling microscopy and density functional theory (DFT) calculations. The reversible phase transition between (4$\times$1) and (5$\times$1) is controlled by adjusting the surface metal concentration [Sr] or [Ti]. Resolving the atomic structures of the surface, DFT calculations verify that the phase stability changes upon the chemical potential of Sr or Ti. Particularly, the density of oxygen vacancies is low on the thermodynamically stabilized SrTiO$_3$(110) surface.

cond-mat.mtrl-sci↗