SearcharxivSearch

arXiv subjects

Shenheng Xu

Publications and source records attributed to Shenheng Xu.

At least 19 recordsLinked to original sources

A Differentiable Framework for Full and Phaseless Data Inversion Using Neural Implicit Contrast-Source Representation

In this study, we extend the contrast source inversion to a fully differentiable, unsupervised framework based on a neural implicit representation of the contrast source. Specifically, instead of a pixel-wise discrete representation, the contrast source is parameterized by a lightweight residual multilayer perceptron (ResMLP) as a continuous neural field conditioned on spatial coordinates and transmitter settings. This continuous parameterization provides a more flexible representation of the contrast source and improves reconstruction accuracy and robustness under noisy measurements. Building on this representation, the state equation and data equation are combined with total-variation regularization to form a differentiable objective function. By reformulating the VIE-constrained inversion as an end-to-end differentiable optimization problem, the network parameters and the medium contrast are jointly optimized via automatic differentiation. Within the same framework, both full and phaseless data inversion are accommodated by only modifying the data misfit function. Numerical experiments demonstrate that this scheme yields higher reconstruction accuracy and robustness than conventional CSI across a range of noise levels and measurement settings. The continuous neural field further enables super-resolution inference at resolutions finer than the training grid, decoupling inversion cost from reconstruction fidelity. Ablation studies and comparisons with alternative neural architectures further confirm that the contrast source parameterization and VIE-based formulation are both essential to the observed improvements.

physics.comp-ph

Feature-based Inversion of 2.5D Controlled Source Electromagnetic Data using Generative Priors

In this study, we investigate feature-based 2.5D controlled source marine electromagnetic (mCSEM) data inversion using generative priors. Two-and-half dimensional modeling using finite difference method (FDM) is adopted to compute the response of horizontal electric dipole (HED) excitation. Rather than using a neural network to approximate the entire inverse mapping in a black-box manner, we adopt a plug-andplay strategy in which a variational autoencoder (VAE) is used solely to learn prior information on conductivity distributions. During the inversion process, the conductivity model is iteratively updated using the Gauss Newton method, while the model space is constrained by projections onto the learned VAE decoder. This framework preserves explicit control over data misfit and enables flexible adaptation to different survey configurations. Numerical and field experiments demonstrate that the proposed approach effectively incorporates prior information, improves reconstruction accuracy, and exhibits good generalization performance.

physics.geo-ph

Attenuation Compensation in Lossy Media via the Wave Operator Model

The wave operator model provides a framework for modeling wave propagation by encoding material parameter distributions into matrix-form operators. This paper extends this framework from lossless to lossy media. We present a derivation of the wave operator solution for the electric field in dissipative environments, which can be decomposed into a closed-form propagation term and a non-closed-form dissipation term. Based on an analysis of the dominant exponential decay within the propagation term, an attenuation compensation strategy is proposed to restore the attenuated data to an approximate lossless state. The performance of this compensation strategy is analyzed and validated through numerical experiments, establishing the theoretical foundation for reduced order model (ROM)-based techniques in lossy media.

physics.comp-ph

A 2-bit Ku-band Digital Metasurface with Infinitely Scalable Capability

In this letter, we present the design and implementation of a 2-bit digaital metasurface operating in the Ku-band, engineered to exhibit advanced polarization conversion characteristics and support dual-polarization control for both X- and Y-polarizations. To address the challenge of array size scalability hindered by extensive DC control routing in 2-bit metasurfaces, we propose a novel RF-DC separation architecture. This approach integrates the metasurface and DC control circuitry onto separate printed circuit boards (PCBs), interconnected via pin cascading, enabling theoretically unlimited two-dimensional array expansion. To validate this design, a ${4\times16 \times 16}$ metasurface prototype was fabricated and experimentally evaluated, which can achieve a gain of 28.3dB and an aperture efficiency of 21.02\%, confirming the scalability and performance of the proposed architecture. The developed 2-bit high-gain metasurface offers significant reference value for applications in long-distance communication and radar detection. Furthermore, the RF-DC separation architecture introduces a pioneering framework for large-scale metasurface deployment in practical engineering scenarios, enhancing design flexibility and scalability.

physics.optics

Anti-Interference Communication Using Computational Antenna

This letter proposes a novel anti-interference communication method leveraging computational antennas, utilizing time averaging and 1-bit reconfigurable intelligent surfaces (RIS) to achieve robust signal modulation with minimal hardware complexity. We develop a communication model for computational antennas and propose an efficient signal processing algorithm optimized for temporal modulation. A USRP-based experimental platform is established to validate the approach under strong interference conditions (e.g., 5 dB jamming-to-signal ratio). Experimental results reveal up to an 80.9\% reduction in bit error rate (BER) and effective restoration of distorted images in transmission tests. Compared to conventional techniques like spread spectrum or frequency hopping, which require significant spectral resources, our method offers superior anti-interference performance without additional spectral overhead. This research provides valuable insights for radar detection, military communications, and next-generation wireless networks.

physics.comp-ph

A Novel Beam Tracking Approach for Preventing Beam Collapse

To address the issue of beam collapse resulting from instantaneous instability during switch transitions in beam tracking, this paper proposes a novel beam switching method based on a row-by-row switching code table. The paper first establishes an abstract model of the beam tracking application scenario and introduces the reconfigurable intelligent surface (RIS) employed in this paper. Subsequently, simulations are conducted to compare the conventional direct beam switching method with the proposed row-by-row switching code table approach, thereby elucidating the advantages and limitations of the new method. In parallel, a RIS hardware platform is constructed in a microwave anechoic chamber for experimental validation. Both simulation and experimental results show that, by incorporating intermediate state transitions, the approach achieves beam tracking without beam collapse while incurring no significant gain loss. Finally, the paper discusses the applicability scope and potential scenarios for the proposed method. This research provides valuable insights for applications in mobile communications and radar detection.

physics.app-ph

A Beam-Steering Reflectarray Antenna with Arbitrary Linear-Polarization Reconfiguration

This work presents a beam-steering reflectarray antenna that achieves arbitrary linear polarization (LP) reconfiguration. This antenna employs a dual-circular polarization (CP) reconfigurable reflectarray and an LP feed horn to generate an LP beam. The incident LP wave is decomposed into two CP components, whose reflection phases are independently adjusted. By re-combining these reflected CP beams with different phase constants, arbitrary LP states can be synthesized. Experimental validation is performed using a 16$\times$16 1-bit reconfigurable reflectarray operating at Ku band, demonstrating reconfigurable LP states of LP(0$^\circ$), LP(45$^\circ$), LP(90$^\circ$) and LP(135$^\circ$), as well as dynamic beam scanning functionality from 0$^\circ$ to 60$^\circ$. This polarization-reconfigurable, beam-steering reflectarray has potential for applications in satellite and mobile communications, where both beam patterns and polarization alignment are crucial.

physics.app-ph

Improving Beam Granularity Performance of Reconfigurable Refelctarray Radars via Spatial Quantization and Phase Quantization Approach

In this paper, the impacts of spatial quantization and phase quantization on the beam granularity characteristic of reconfigurable reflectarray (RRA) radars are systematically investigated. From the perspective of the difference beam, a theoretical analysis is conducted to derive the factors influencing beam granularity. To validate the theoretical findings, simulations are performed under various quantization scenarios: specifically, 1-bit, 2-bit, and 3-bit spatial quantization with 1-bit phase quantization, as well as 1-bit, 2-bit, and 3-bit phase quantization with 1-bit spatial quantization. The experimental results demonstrate that both spatial quantization and phase quantization effectively reduce beam granularity in reconfigurable reflectarray radars, thereby enhancing the angular resolution of the beam. These findings offer valuable insights and practical reference for beam-tracking applications in radar and communications.

physics.app-ph

Design of A Single Antenna With Tunable In-Band RCS Null Through Load Impedance Control

Reducing the in-band radar cross section (RCS) of antennas has been a widely concerned problem. However, most of works focus on RCS reduction of antenna arrays, or need to additionally increase the size of a single antenna. Therefore, this work presents a method to control the null of the in-band RCS by changing the load impedance of the antenna without additional aperture. Then, the monostatic and bistatic RCS can be effectively reduced. First, the relationship between the null position and the load impedance is calculated by analyzing the in-band scattering field of the antenna. Second, the performance of RCS null control is verified by the traditional patch antenna, whose operating frequency is designed at 2 GHz. The load impedance of the antenna is controlled by cascading an open circuit stub of different lengths on the feeding line. Simulated results show that the proposed method can tune the null of in-band RCS from 0o to 60o under linear polarized normally incident plane wave. By setting the null reasonably, it can achieve 10 dB reduction for both monostatic and bistatic RCS at the same time. Moreover, the radiation performance of the antenna basically remains unchanged, and the gain is greater than 6.5 dBi. Measured results verify the effectiveness of the design method.

physics.app-ph

Spatial Quantization: Advancing Insights for Enhancing RRAs Performance

In the new perspective of spatial quantization, this article systematically studies the advantages of reconfigurable reflectarray (RRA) designed with closely spaced elements in terms of sidelobe level (SLL), scanning accuracy and scan loss, including theoretical analysis and simulation verification. This article sequentially studies RRAs with element periods of λ/2, λ/4 and λ/8. Both theoretical and simulation results show that under the condition of the same aperture size, with the number of spatial quantization bits increasing, the SLL performance of 1bit RRA using closely spaced structure will have a improvement of about 5dB. The scanning accuracy at 60° is improved from 54.52° at λ/2 to 57.97° at λ/8, while the scan loss is improved from 5.02dB at λ/2 to 2.85dB at λ/8. This study has an important reference value for reconfigurable reflectarray design, communication system and radar design.

physics.app-ph

RIS Assisted Wireless Communication: Advanced Modeling, Simulation, and Analytical Insights

This article presents a novel perspective to model and simulate reconfigurable intelligent surface (RIS)-assisted communication systems. Traditional methods in antenna design often rely on array method to simulate, whereas communication system modeling tends to idealize antenna behavior. Neither approach sufficiently captures the detailed characteristics of RIS-assisted communication. To address this limitation, we propose a comprehensive simulation framework that jointly models RIS antenna design and the communication process. This framework simulates the entire communication pipeline, encompassing signal generation, modulation, propagation, RIS-based radiation, signal reception, alignment, demodulation, decision, and processing. Using a QPSK-modulated signal for validation, we analyze system performance and investigate the relationship between bit error rate (BER), aperture fill time, array size, and baseband symbol frequency. The results indicate that larger array sizes and higher baseband symbol frequencies exacerbate aperture fill time effects, leading to increased BER. Furthermore, we examine BER variation with respect to signal-to-noise ratio (SNR) and propose an optimal matching-based alignment algorithm, which significantly reduces BER compared to conventional pilot-based alignment methods. This work demonstrates the entire process of RIS communication, and reveals the source of bit errors, which provides valuable insights into the design and performance optimization of RIS-assisted communication systems.

physics.app-ph

X-RIS: A Study of the Principles and Applications of X-Shaped RIS

This paper analyzes the working principle of X-Shaped reconfigurable intelligent surface (RIS) in detail and reveals the different types of RIS that can be designed based on this structure. Combined with the design examples using this structure in the currently published articles, this paper summarizes and organizes them, and finally, based on this X-Shaped structure, this paper explores some other possible designs, which reflects the potential of the design versatility of the X-RIS structure.

cs.CE

A Study of Four-Switch Cross-Shaped RIS and A Novel Design Example

This paper analyzes the working principle of four-switch cross-shaped reconfigurable intelligent surface (RIS) in detail and reveals the different types of RIS that can be designed based on this structure. Combined with the design examples using this structure in the currently published articles, this paper summarizes and organizes them, and also points out several RIS solutions that have not been designed using this structure. Finally, based on this four-switch cross-shaped structure, this paper proposes a novel RIS design example that can realize the function switching of 1-bit ultra-wideband (UWB) and 2-bit narrowband, and conducts simulation verification. The simulation results show that by optimizing the element structure and controlling the states of the four switches, the 1-bit ultra-wideband function can achieve a frequency band coverage of 10.5GHz-19.8GHz and a 2-bit phase quantization function around 18.12GHz. At the same time, it can realize 60° two-dimensional beam scanning function. We call this novel design "bit reconfigurable metasurface".

physics.app-ph

Multi-frequency Neural Born Iterative Method for Solving 2-D Inverse Scattering Problems

In this work, we propose a deep learning-based imaging method for addressing the multi-frequency electromagnetic (EM) inverse scattering problem (ISP). By combining deep learning technology with EM physical laws, we have successfully developed a multi-frequency neural Born iterative method (NeuralBIM), guided by the principles of the single-frequency NeuralBIM. This method integrates multitask learning techniques with NeuralBIM's efficient iterative inversion process to construct a robust multi-frequency Born iterative inversion model. During training, the model employs a multitask learning approach guided by homoscedastic uncertainty to adaptively allocate the weights of each frequency's data. Additionally, an unsupervised learning method, constrained by the physical laws of ISP, is used to train the multi-frequency NeuralBIM model, eliminating the need for contrast and total field data. The effectiveness of the multi-frequency NeuralBIM is validated through synthetic and experimental data, demonstrating improvements in accuracy and computational efficiency for solving ISP. Moreover, this method exhibits strong generalization capabilities and noise resistance. The multi-frequency NeuralBIM method explores a novel inversion method for multi-frequency EM data and provides an effective solution for the electromagnetic ISP of multi-frequency data.

physics.comp-ph

Transmission efficiency limit of single-switch and cascaded reconfigurable transmitarray elements

Reconfigurable transmitarray antennas (RTAs) are rapidly gaining popularity, but optimizing their performance requires systematic design theories. In particular, establishing a performance limit theory for RTA elements is valuable. This paper presents a transmission efficiency limit theory for single-switch RTA elements and their cascaded extensions. Employing microwave network analysis, we analytically investigate single-switch RTA elements, demonstrating that their transmission coefficients under two states must lie on or within a specific unit circle on the Smith chart. Therefore, the transmission phase difference is tightly constrained by the transmission amplitudes, indicating that the phase-shifting ability of a single-switch RTA element is limited. Subsequently, this analysis is extended to cascaded RTA elements. By cascading several single-switch layers, the phase variation range is extended, enabling the realization of 1-bit phase shifts with high transmission amplitudes. These findings have significant impact on the design and optimization of RTA elements.

physics.app-ph

Centralized active reconfigurable intelligent surface: Architecture, path loss analysis and experimental verification

Reconfigurable intelligent surfaces (RISs) are promising candidate for the 6G communication. Recently, active RIS has been proposed to compensate the multiplicative fading effect inherent in passive RISs. However, conventional distributed active RISs, with at least one amplifier per element, are costly, complex, and power-intensive. To address these challenges, this paper proposes a novel architecture of active RIS: the centralized active RIS (CA-RIS), which amplifies the energy using a centralized amplifying reflector to reduce the number of amplifiers. Under this architecture, only as low as one amplifier is needed for power amplification of the entire array, which can eliminate the mutual-coupling effect among amplifiers, and significantly reduce the cost, noise level, and power consumption. We evaluate the performance of CA-RIS, specifically its path loss, and compare it with conventional passive RISs, revealing a moderate amplification gain. Furthermore, the proposed CA-RIS and the path loss model are experimentally verified, achieving a 9.6 dB net gain over passive RIS at 4 GHz. The CA-RIS offers a substantial simplification of active RIS architecture while preserving performance, striking an optimal balance between system complexity and the performance, which is competitive in various scenarios.

physics.app-ph

Physics-Informed Supervised Residual Learning for Electromagnetic Modeling

In this study, physics-informed supervised residual learning (PhiSRL) is proposed to enable an effective, robust, and general deep learning framework for 2D electromagnetic (EM) modeling. Based on the mathematical connection between the fixed-point iteration method and the residual neural network (ResNet), PhiSRL aims to solve a system of linear matrix equations. It applies convolutional neural networks (CNNs) to learn updates of the solution with respect to the residuals. Inspired by the stationary and non-stationary iterative scheme of the fixed-point iteration method, stationary and non-stationary iterative physics-informed ResNets (SiPhiResNet and NiPhiResNet) are designed to solve the volume integral equation (VIE) of EM scattering. The effectiveness and universality of PhiSRL are validated by solving VIE of lossless and lossy scatterers with the mean squared errors (MSEs) converging to $\sim 10^{-4}$ (SiPhiResNet) and $\sim 10^{-7}$ (NiPhiResNet). Numerical results further verify the generalization ability of PhiSRL.

physics.comp-ph

In-Band Co-Polarization Scattering Beam Scanning of Antenna Array Based on 1-Bit Reconfigurable Load Impedance

Controlling the in-band co-polarization scattering of the antenna while maintaining its radiation performance is crucial for the low observable platform. Thus, this paper studies the in-band co-polarization scattering beam scanning of antenna arrays. Firstly, the regulation method of antenna scattering is analyzed theoretically, concluding that the amplitude and phase of the antenna's scattering field can be regulated by changing the load impedance. Subsequently, PIN diodes are implemented to control the load impedance of the antenna. Consequently, the scattering of the antenna, ensuring that the antenna's scattering meets the condition of equal amplitude and a phase difference of 180° when the PIN diode switches, thereby realizing scattering beam scanning. Moreover, by introducing an additional pre-phase, the inherent symmetric dual-beam issue observed in traditional 1-bit reconfigurable structures is overcome, achieving single-beam scanning of the scattering. Finally, a 1{\times}16 linear antenna array is designed and fabricated, which operates at 6 GHz with radiation gain of 16.3 dBi. The scattering beams of the designed array can point to arbitrary angles within 45°, significantly reducing the in-band co-polarization backward radar cross section. The measured results align well with the simulated ones.

physics.app-ph