arXiv subjects

Shi Jin

Publications and source records attributed to Shi Jin.

At least 181 records · Page 10Linked to original sources

arXiv2025

Rydberg Atomic Receivers for Wireless Communications: Fundamentals, Potential, Applications, and Challenges

Rydberg atomic receivers (RARs) leverage the quantum coherence of highly excited atoms to overcome the intrinsic physical limitations of conventional radio frequency receivers (RFRs), particularly in sensitivity, and bandwidth. This innovative technology represents a paradigm shift in wireless communication systems. This paper systematically explains the fundamental sensing mechanisms of RARs, contrasts their differences from RFRs in working principles and architectures. We explore their advantages in emerging wireless communication scenarios, such as integrated sensing and communications, quantum Rydberg radar, and quantum space communications. Practical challenges, such as limited instantaneous bandwidth and nonlinear distortion, are identified. To address these issues, mitigation strategies and future research directions are also outlined, supporting the advancement of RAR-aided wireless systems.

eess.SP↗

arXiv2025

Learning-Aided Iterative Receiver for Superimposed Pilots: Design and Experimental Evaluation

The superimposed pilot transmission scheme offers substantial potential for improving spectral efficiency in MIMO-OFDM systems, but it presents significant challenges for receiver design due to pilot contamination and data interference. To address these issues, we propose an advanced iterative receiver based on joint channel estimation, detection, and decoding, which refines the receiver outputs through iterative feedback. The proposed receiver incorporates two adaptive channel estimation strategies to enhance robustness under time-varying and mismatched channel conditions. First, a variational message passing (VMP) method and its low-complexity variant (VMP-L) are introduced to perform inference without relying on time-domain correlation. Second, a deep learning (DL) based estimator is developed, featuring a convolutional neural network with a despreading module and an attention mechanism to extract and fuse relevant channel features. Extensive simulations under multi-stream and high-mobility scenarios demonstrate that the proposed receiver consistently outperforms conventional orthogonal pilot baselines in both throughput and block error rate. Moreover, over-the-air experiments validate the practical effectiveness of the proposed design. Among the methods, the DL based estimator achieves a favorable trade-off between performance and complexity, highlighting its suitability for real-world deployment in dynamic wireless environments.

cs.IT↗

arXiv2025

Semi-Supervised Federated Learning via Dual Contrastive Learning and Soft Labeling for Intelligent Fault Diagnosis

Intelligent fault diagnosis (IFD) plays a crucial role in ensuring the safe operation of industrial machinery and improving production efficiency. However, traditional supervised deep learning methods require a large amount of training data and labels, which are often located in different clients. Additionally, the cost of data labeling is high, making labels difficult to acquire. Meanwhile, differences in data distribution among clients may also hinder the model's performance. To tackle these challenges, this paper proposes a semi-supervised federated learning framework, SSFL-DCSL, which integrates dual contrastive loss and soft labeling to address data and label scarcity for distributed clients with few labeled samples while safeguarding user privacy. It enables representation learning using unlabeled data on the client side and facilitates joint learning among clients through prototypes, thereby achieving mutual knowledge sharing and preventing local model divergence. Specifically, first, a sample weighting function based on the Laplace distribution is designed to alleviate bias caused by low confidence in pseudo labels during the semi-supervised training process. Second, a dual contrastive loss is introduced to mitigate model divergence caused by different data distributions, comprising local contrastive loss and global contrastive loss. Third, local prototypes are aggregated on the server with weighted averaging and updated with momentum to share knowledge among clients. To evaluate the proposed SSFL-DCSL framework, experiments are conducted on two publicly available datasets and a dataset collected on motors from the factory. In the most challenging task, where only 10\% of the data are labeled, the proposed SSFL-DCSL can improve accuracy by 1.15% to 7.85% over state-of-the-art methods.

cs.LG↗

arXiv2025

A Wireless Foundation Model for Multi-Task Prediction

With the growing complexity and dynamics of the mobile communication networks, accurately predicting key system parameters, such as channel state information (CSI), user location, and network traffic, has become essential for a wide range of physical (PHY)-layer and medium access control (MAC)-layer tasks. Although traditional deep learning (DL)-based methods have been widely applied to such prediction tasks, they often struggle to generalize across different scenarios and tasks. In response, we propose a unified foundation model for multi-task prediction in wireless networks that supports diverse prediction intervals. The proposed model enforces univariate decomposition to unify heterogeneous tasks, encodes granularity for interval awareness, and uses a causal Transformer backbone for accurate predictions. Additionally, we introduce a patch masking strategy during training to support arbitrary input lengths. After trained on large-scale datasets, the proposed foundation model demonstrates strong generalization to unseen scenarios and achieves zero-shot performance on new tasks that surpass traditional full-shot baselines.

cs.AI↗

arXiv2025

Cooperative Mapping, Localization, and Beam Management via Multi-Modal SLAM in ISAC Systems

Simultaneous localization and mapping (SLAM) plays a critical role in integrated sensing and communication (ISAC) systems for sixth-generation (6G) millimeter-wave (mmWave) networks, enabling environmental awareness and precise user equipment (UE) positioning. While cooperative multi-user SLAM has demonstrated potential in leveraging distributed sensing, its application within multi-modal ISAC systems remains limited, particularly in terms of theoretical modeling and communication-layer integration. This paper proposes a novel multi-modal SLAM framework that addresses these limitations through three key contributions. First, a Bayesian estimation framework is developed for cooperative multi-user SLAM, along with a two-stage algorithm for robust radio map construction under dynamic and heterogeneous sensing conditions. Second, a multi-modal localization strategy is introduced, fusing SLAM results with camera-based multi-object tracking and inertial measurement unit (IMU) data via an error-aware model, significantly improving UE localization in multi-user scenarios. Third, a sensing-aided beam management scheme is proposed, utilizing global radio maps and localization data to generate UE-specific prior information for beam selection, thereby reducing inter-user interference and enhancing downlink spectral efficiency. Simulation results demonstrate that the proposed system improves radio map accuracy by up to 60%, enhances localization accuracy by 37.5%, and significantly outperforms traditional methods in both indoor and outdoor environments.

cs.IT↗

arXiv2025

Simultaneous Localization and Mapping Using Active mmWave Sensing in 5G NR

Millimeter-wave (mmWave) 5G New Radio (NR) communication systems, with their high-resolution antenna arrays and extensive bandwidth, offer a transformative opportunity for high-throughput data transmission and advanced environmental sensing. Although passive sensing-based SLAM techniques can estimate user locations and environmental reflections simultaneously, their effectiveness is often constrained by assumptions of specular reflections and oversimplified map representations. To overcome these limitations, this work employs a mmWave 5G NR system for active sensing, enabling it to function similarly to a laser scanner for point cloud generation. Specifically, point clouds are extracted from the power delay profile estimated from each beam direction using a binary search approach. To ensure accuracy, hardware delays are calibrated with multiple predefined target points. Pose variations of the terminal are then estimated from point cloud data gathered along continuous trajectory viewpoints using point cloud registration algorithms. Loop closure detection and pose graph optimization are subsequently applied to refine the sensing results, achieving precise terminal localization and detailed radio map reconstruction. The system is implemented and validated through both simulations and experiments, confirming the effectiveness of the proposed approach.

eess.SP↗

arXiv2025

LVM4CSI: Enabling Direct Application of Pre-Trained Large Vision Models for Wireless Channel Tasks

Accurate channel state information (CSI) is critical to the performance of wireless communication systems, especially with the increasing scale and complexity introduced by 5G and future 6G technologies. While artificial intelligence (AI) offers a promising approach to CSI acquisition and utilization, existing methods largely depend on task-specific neural networks (NNs) that require expert-driven design and large training datasets, limiting their generalizability and practicality. To address these challenges, we propose LVM4CSI, a general and efficient framework that leverages the structural similarity between CSI and computer vision (CV) data to directly apply large vision models (LVMs) pre-trained on extensive CV datasets to wireless tasks without any fine-tuning, in contrast to large language model-based methods that generally necessitate fine-tuning. LVM4CSI maps CSI tasks to analogous CV tasks, transforms complex-valued CSI into visual formats compatible with LVMs, and integrates lightweight trainable layers to adapt extracted features to specific communication objectives. We validate LVM4CSI through three representative case studies, including channel estimation, human activity recognition, and user localization. Results demonstrate that LVM4CSI achieves comparable or superior performance to task-specific NNs, including an improvement exceeding 9.61 dB in channel estimation and approximately 40% reduction in localization error. Furthermore, it significantly reduces the number of trainable parameters and eliminates the need for task-specific NN design.

cs.IT↗

arXiv2025

Difference Imaging-Based Parking Lot Surveillance in Multi-RIS-Aided Collaborative ISAC System

Parking lot surveillance with integrated sensing and communication (ISAC) system is one of the potential application scenarios defined by 3rd Generation Partnership Project (3GPP). Traditional surveillance systems using cameras or magnetic sensors face limitations such as light dependence, high costs, and constrained scalability. Wireless sensing with reconfigurable intelligent surfaces (RISs) has the ability to address the above limitations due to its light independence and lower deployment overhead. In this study, we propose a difference imaging-based multi-RIS-aided collaborative ISAC system to achieve parking lot surveillance. In a parking lot, the presence of vehicles induces impacts on wireless environments due to scattering characteristic variation. By delineating the parking lot into a two-dimensional image with several grid units, the proposed system can capture the variation of their scattering coefficients in free and occupied states. The variation between these two states is sparse, which can be captured through compressed sensing (CS)-based imaging algorithms. Additionally, we collaboratively employ multiple RISs to enable higher surveillance performance. Experimental results demonstrate that our method can achieve high-accuracy parking occupancy detection, and the employment of collaborative RISs further enhances the detection rate.

cs.IT↗

arXiv2025

Joint Spatial Division and Multiplexing with Customized Orthogonal Group Channels in Multi-RIS-Assisted Systems

Reconfigurable intelligent surfaces (RISs) offer the unique capability to reshape the radio environment, thereby simplifying transmission schemes traditionally contingent on channel conditions. Joint spatial division and multiplexing (JSDM) emerges as a low-overhead transmission scheme for multi-user equipment (UE) scenarios, typically requiring complex matrix decomposition to achieve block-diagonalization of the effective channel matrix. In this study, we introduce an innovative JSDM design that leverages RISs to customize channels, thereby streamlining the overall procedures. By strategically positioning RISs at the discrete Fourier transform (DFT) directions of the base station (BS), we establish orthogonal line-of-sight links within the BS-RIS channel, enabling a straightforward pre-beamforming design. Based on UE grouping, we devise reflected beams of the RIS with optimized directions to mitigate inter-group interference in the RISs-UEs channel. An approximation of the channel cross-correlation coefficient is derived and serves as a foundation for the RISs-UEs association, further diminishing inter-group interference. Numerical results substantiate the efficacy of our RIS-customized JSDM in not only achieving effective channel block-diagonalization but also in significantly enhancing the sum spectral efficiency for multi-UE transmissions.

cs.IT↗

arXiv2025

RIS-Aided Cooperative ISAC Networks for Structural Health Monitoring

Integrated sensing and communication (ISAC) is a key feature of future cellular systems, enabling applications such as intruder detection, monitoring, and tracking using the same infrastructure. However, its potential for structural health monitoring (SHM), which requires the detection of slow and subtle structural changes, remains largely unexplored due to challenges such as multipath interference and the need for ultra-high sensing precision. This study introduces a novel theoretical framework for SHM via ISAC by leveraging reconfigurable intelligent surfaces (RIS) as reference points in collaboration with base stations and users. By dynamically adjusting RIS phases to generate distinct radio signals that suppress background multipath interference, measurement accuracy at these reference points is enhanced. We theoretically analyze RIS-aided collaborative sensing in three-dimensional cellular networks using Fisher information theory, demonstrating how increasing observation time, incorporating additional receivers (even with self-positioning errors), optimizing RIS phases, and refining collaborative node selection can reduce the position error bound to meet SHM's stringent accuracy requirements. Furthermore, we develop a Bayesian inference model to identify structural states and validate damage detection probabilities. Both theoretical and numerical analyses confirm ISAC's capability for millimeter-level deformation detection, highlighting its potential for high-precision SHM applications.

cs.IT↗

arXiv2025

SComCP: Task-Oriented Semantic Communication for Collaborative Perception

Reliable detection of surrounding objects is critical for the safe operation of connected automated vehicles (CAVs). However, inherent limitations such as the restricted perception range and occlusion effects compromise the reliability of single-vehicle perception systems in complex traffic environments. Collaborative perception has emerged as a promising approach by fusing sensor data from surrounding CAVs with diverse viewpoints, thereby improving environmental awareness. Although collaborative perception holds great promise, its performance is bottlenecked by wireless communication constraints, as unreliable and bandwidth-limited channels hinder the transmission of sensor data necessary for real-time perception. To address these challenges, this paper proposes SComCP, a novel task-oriented semantic communication framework for collaborative perception. Specifically, SComCP integrates an importance-aware feature selection network that selects and transmits semantic features most relevant to the perception task, significantly reducing communication overhead without sacrificing accuracy. Furthermore, we design a semantic codec network based on a joint source and channel coding (JSCC) architecture, which enables bidirectional transformation between semantic features and noise-tolerant channel symbols, thereby ensuring stable perception under adverse wireless conditions. Extensive experiments demonstrate the effectiveness of the proposed framework. In particular, compared to existing approaches, SComCP can maintain superior perception performance across various channel conditions, especially in low signal-to-noise ratio (SNR) scenarios. In addition, SComCP exhibits strong generalization capability, enabling the framework to maintain high performance across diverse channel conditions, even when trained with a specific channel model.

eess.SP↗

arXiv2025

Limited Feedback in RIS-Assisted Wireless Communications: Use Cases, Challenges, and Future Directions

Channel state information (CSI) is essential to unlock the potential of reconfigurable intelligent surfaces (RISs) in wireless communication systems. Since massive RIS elements are typically implemented without baseband signal processing capabilities, limited CSI feedback is necessary when designing the reflection/refraction coefficients of the RIS. In this article, the unique RIS-assisted channel features, such as the RIS position-dependent channel fluctuation, the ultra-high dimensional sub-channel matrix, and the structured sparsity, are distilled from recent advances in limited feedback and used as guidelines for designing feedback schemes. We begin by illustrating the use cases and the corresponding challenges associated with RIS feedback. We then discuss how to leverage techniques such as channel customization, structured-sparsity, autoencoders, and others to reduce feedback overhead and complexity when devising feedback schemes. Finally, we identify potential research directions by considering the unresolved challenges, the new RIS architecture, and the integration with multi-modal information and artificial intelligence.

eess.SP↗

arXiv2025

Semantic-aware Digital Twin for AI-based CSI Acquisition

Artificial intelligence (AI) substantially enhances channel state information (CSI) acquisition performance but is limited by its reliance on single-modality information and deployment challenges, particularly in dataset collection. This paper investigates the use of semantic-aware digital twin (DT) to enhance AI-based CSI acquisition. We first briefly introduce the motivation and recent advancements in AI-driven CSI acquisition and semantic-aware DT employment for air interfaces. Then, we thoroughly explore how semantic-aware DT can bolster AI-based CSI acquisition. We categorizes the semantic-aware DT for AI-based CSI acquisition into two classes: enhancing AI-based CSI acquisition through integration with DT and using DT to aid AI-based CSI deployment. Potential integration frameworks are introduced in detail. Finally, we conclude by outlining potential research directions within the semantic-aware DT-assisted AI-based CSI acquisition.

cs.IT↗

arXiv2025

Quantum Algorithms for Stochastic Differential Equations: A Schrödingerisation Approach

Quantum computers are known for their potential to achieve up-to-exponential speedup compared to classical computers for certain problems. To exploit the advantages of quantum computers, we propose quantum algorithms for linear stochastic differential equations, utilizing the Schrödingerisation method for the corresponding approximate equation by treating the noise term as a (discrete-in-time) forcing term. Our algorithms are applicable to stochastic differential equations with both Gaussian noise and $α$-stable Lévy noise. The gate complexity of our algorithms exhibits an $\mathcal{O}(d\log(Nd))$ dependence on the dimensions $d$ and sample sizes $N$, where its corresponding classical counterpart requires nearly exponentially larger complexity in scenarios involving large sample sizes. In the Gaussian noise case, we show the strong convergence of first order in the mean square norm for the approximate equations. The algorithms are numerically verified for the Ornstein-Uhlenbeck processes, geometric Brownian motions, and one-dimensional Lévy flights.

quant-ph↗

arXiv2025

Exploiting Both Pilots and Data Payloads for Integrated Sensing and Communications

Integrated sensing and communications (ISAC) is one of the key enabling technologies in future sixth-generation (6G) networks. Current ISAC systems predominantly rely on deterministic pilot signals within the signal frame to accomplish sensing tasks. However, these pilot signals typically occupy only a small portion, e.g., 0.15% to 25%, of the time-frequency resources. To enhance the system utility, a promising solution is to repurpose the extensive random data payload signals for sensing tasks. In this paper, we analyze the ISAC performance of a multi-antenna system where both deterministic pilot and random data symbols are employed for sensing tasks. By capitalizing on random matrix theory (RMT), we first derive a semi-closed-form asymptotic expression of the ergodic linear minimum mean square error (ELMMSE). Then, we formulate an ISAC precoding optimization problem to minimize the ELMMSE, which is solved via a specifically tailored successive convex approximation (SAC) algorithm. To provide system insights, we further derive a closed-form expression for the asymptotic ELMMSE at high signal-to-noise ratios (SNRs). Our analysis reveals that, compared with conventional sensing implemented by deterministic signals, the sensing performance degradation induced by random signals is critically determined by the ratio of the transmit antenna size to the data symbol length. Based on this result, the ISAC precoding optimization problem at high SNRs is transformed into a convex optimization problem that can be efficiently solved. Simulation results validate the accuracy of the derived asymptotic expressions of ELMMSE and the performance of the proposed precoding schemes. Particularly, by leveraging data payload signals for sensing tasks, the sensing error is reduced by up to 5.6 dB compared to conventional pilot-based sensing.

eess.SP↗

arXiv2025

Hierarchical Multi-Agent Reinforcement Learning-based Coordinated Spatial Reuse for Next Generation WLANs

High-density Wi-Fi deployments often result in significant co-channel interference, which degrades overall network performance. To address this issue, coordination of multi access points (APs) has been considered to enable coordinated spatial reuse (CSR) in next generation wireless local area networks. This paper tackles the challenge of downlink spatial reuse in Wi-Fi networks, specifically in scenarios involving overlapping basic service sets, by employing hierarchical multi-agent reinforcement learning (HMARL). We decompose the CSR process into two phases, i.e., a polling phase and a decision phase, and introduce the HMARL algorithm to enable efficient CSR. To enhance training efficiency, the proposed HMARL algorithm employs a hierarchical structure, where station selection and power control are determined by a high- and low-level policy network, respectively. Simulation results demonstrate that this approach consistently outperforms baseline methods in terms of throughput and latency across various network topologies. Moreover, the algorithm exhibits robust performance when coexisting with legacy APs. Additional experiments in a representative topology further reveal that the carefully designed reward function not only maximizes the overall network throughput, but also improves fairness in transmission opportunities for APs in high-interference regions.

cs.MA↗

arXiv2025

Conditional Diffusion Model-Driven Generative Channels for Double RIS-Aided Wireless Systems

With the development of the upcoming sixth-generation networks (6G), reconfigurable intelligent surfaces (RISs) have gained significant attention due to its ability of reconfiguring wireless channels via smart reflections. However, traditional channel state information (CSI) acquisition techniques for double-RIS systems face challenges (e.g., high pilot overhead or multipath interference). This paper proposes a new channel generation method in double-RIS communication systems based on the tool of conditional diffusion model (CDM). The CDM is trained on synthetic channel data to capture channel characteristics. It addresses the limitations of traditional CSI generation methods, such as insufficient model understanding capability and poor environmental adaptability. We provide a detailed analysis of the diffusion process for channel generation, and it is validated through simulations. The simulation results demonstrate that the proposed CDM based method outperforms traditional channel acquisition methods in terms of normalized mean squared error (NMSE). This method offers a new paradigm for channel acquisition in double-RIS systems, which is expected to improve the quality of channel acquisition with low pilot overhead.

eess.SP↗

arXiv2025

DMRS-Based Uplink Channel Estimation for MU-MIMO Systems with Location-Specific SCSI Acquisition

With the growing number of users in multi-user multiple-input multiple-output (MU-MIMO) systems, demodulation reference signals (DMRSs) are efficiently multiplexed in the code domain via orthogonal cover codes (OCC) to ensure orthogonality and minimize pilot interference. In this paper, we investigate uplink DMRS-based channel estimation for MU-MIMO systems with Type II OCC pattern standardized in 3GPP Release 18, leveraging location-specific statistical channel state information (SCSI) to enhance performance. Specifically, we propose a SCSI-assisted Bayesian channel estimator (SA-BCE) based on the minimum mean square error criterion to suppress the pilot interference and noise, albeit at the cost of cubic computational complexity due to matrix inversions. To reduce this complexity while maintaining performance, we extend the scheme to a windowed version (SA-WBCE), which incorporates antenna-frequency domain windowing and beam-delay domain processing to exploit asymptotic sparsity and mitigate energy leakage in practical systems. To avoid the frequent real-time SCSI acquisition, we construct a grid-based location-specific SCSI database based on the principle of spatial consistency, and subsequently leverage the uplink received signals within each grid to extract the SCSI. Facilitated by the multilinear structure of wireless channels, we formulate the SCSI acquisition problem within each grid as a tensor decomposition problem, where the factor matrices are parameterized by the multi-path powers, delays, and angles. The computational complexity of SCSI acquisition can be significantly reduced by exploiting the Vandermonde structure of the factor matrices. Simulation results demonstrate that the proposed location-specific SCSI database construction method achieves high accuracy, while the SA-BCE and SA-WBCE significantly outperform state-of-the-art benchmarks in MU-MIMO systems.

eess.SP↗