arXiv subjects

Shi Jin

Publications and source records attributed to Shi Jin.

At least 73 records · Page 4Linked to original sources

arXiv2026

Quantum Implicit-Explicit Schemes for Multiscale Ordinary and Partial Differential Equations via Schrödingerization

In this paper, we present a quantum implicit-explicit (IMEX) scheme for multiscale ordinary and partial differential equations whose discretization parameters are independent of the scaling parameter $\varepsilon$. A key ingredient of our approach is a continuous-time formulation of classical IMEX schemes, which decouples the evolution time of the quantum algorithm from the physical time of the differential equation and is therefore particularly useful in multiscale settings. Building on this idea, we employ the Schrödingerization framework [Phys. Rev. Lett. 133 (2024), 230602] to implement IMEX schemes on quantum computers. Compared to previous HHL type quantum AP scheme [J. Comput. Phys. 471 (2022), 111641], this new method requires narrower -- an extra logarithmic factor -- auxiliary register numerical examples on linear heat and multiscale telegraph equations demonstrate the independence in $\varepsilon$ of the method.

math.NA↗

arXiv2026

Low-Overhead Receiver Design for Data-Dependent Superimposed Training via Deep Learning

Superimposed pilot (SIP) transmission improves spectral efficiency by eliminating the dedicated pilot overhead required in orthogonal pilot (OP)-based schemes. However, SIP suffers from severe pilot-data coupling, which leads to a critical performance-complexity bottleneck at the receiver. To address this issue, this paper proposes a low-overhead transmission framework that revitalizes data-dependent superimposed training (DDST) with enhanced interference mitigation strategies. First, for quasi-static block-fading channels, an enhanced DDST receiver is developed to achieve non-iterative pilot-data decoupling by exploiting data-dependent algebraic structures. Second, to overcome the sensitivity of conventional DDST to channel variations and symbol misidentification in fast time-varying environments, a mix transmission scheme is developed. By strategically applying DDST to a subset of resource elements, the proposed scheme combines the interference-free transmission property of OP with the zero-pilot-overhead advantage of SIP, thereby improving demapping reliability and interference suppression. Furthermore, under the proposed mix scheme, a Vision Transformer-based neural receiver is designed to capture the orthogonal structure between pilots and perturbation-bearing data, as well as the underlying channel correlations, thereby relaxing the stringent quasi-static assumption required for interference disentanglement. Simulation results demonstrate that the proposed framework achieves significant performance gains in the low-to-medium SNR regime under time-varying channels while providing superior computational efficiency compared with state-of-the-art SIP receivers.

cs.IT↗

arXiv2026

NF-TrackLLM: Joint Prediction of UAV Trajectory and Near-Field Beam for LAE XL-MIMO Systems

User localization and beam management are tightly linked in extremely large-scale multiple-input multiple-output (XL-MIMO) systems, especially in dense low-altitude economy (LAE) scenarios. However, the near-field propagation in XL-MIMO introduces strong distance sensitivity and complex spatial coupling, which makes joint trajectory and beam prediction challenging. Meanwhile, large language models (LLMs) have attracted attention in physical-layer transmission for modeling long-range dependencies. In this paper, we propose NF-TrackLLM, a multi-modal semantic-aware framework for near-field unmanned aerial vehicles (UAVs) positioning and beam prediction in XL-MIMO systems. By incorporating visual and LiDAR sensing into a Sionna-based channel generation pipeline, environmental semantics and GPS are utilized to guide trajectory and beam prediction. Built upon the aligned multi-modal representation, a GPT-2-based spatiotemporal reasoning backbone, and a cascaded prediction strategy are employed, where future trajectories are first inferred and then used to guide beam prediction as geometric priors. Simulation results demonstrate that NF-TrackLLM achieves accurate beam prediction and reliable UAV trajectory tracking in dense urban low-altitude scenarios.

eess.SP↗

arXiv2026

Multimodal-NF: A Wireless Dataset for Near-Field Low-Altitude Sensing and Communications

Environment-aware 6G wireless networks demand the deep integration of multimodal and wireless data. However, most existing datasets are confined to 2D terrestrial far-field scenarios, lacking the 3D spatial context and near-field characteristics crucial for low-altitude extremely large-scale multiple-input multiple-output (XL-MIMO) systems. To bridge this gap, this letter introduces Multimodal-NF, a large-scale dataset and specialized generation framework. Operating in the upper midband, it synchronizes high-fidelity near-field channel state information (CSI) and precise wireless labels (e.g., Top-5 beam indices, LoS/NLoS) with comprehensive sensory modalities (RGB images, LiDAR point clouds, and GPS). Crucially, these multimodal priors provide spatial semantics that help reduce the near-field search space and thereby lower the overhead of wireless sensing and communication tasks. Finally, we validate the dataset through representative case studies, demonstrating its utility and effectiveness. The open-source generator and dataset are available at https://lmyxxn.github.io/6GXLMIMODatasets/.

eess.SP↗

arXiv2026

Propagation-Consistent Wireless Environment Digital Twin Construction Under Sparse Measurements

Digital twins (DTs) are promising for wireless deployment, optimization, and data generation, but building a propagation-faithful twin from sparse real measurements remains difficult. This paper proposes a wireless environment digital twin (WEDT) construction paradigm that evolves a reconstructed geometric DT into a propagation-consistent wireless environment representation through calibration of a scene-level electromagnetic (EM) property field. Instead of directly fitting link-specific channel responses, the proposed paradigm first constructs a geometry-prior Bayesian channel map (BCM) to convert sparse position-labeled channel state information (CSI) into dense probabilistic supervision with uncertainty estimates. It then embeds the learnable EM property field into differentiable ray tracing (RT) based channel computation, thereby enabling calibration through an explicit propagation chain. Experiments in both public and real-world scenes show that WEDT achieves accurate channel prediction, generalizes to unseen transceiver topologies, and remains effective across different sampling conditions. WEDT also offers utility for material-related environment sensing, more reliable physical-layer planning, and higher-quality synthetic data generation for wireless AI. These results demonstrate the value of the proposed paradigm for propagation-consistent WEDT construction and related wireless applications.

eess.SP↗

arXiv2026

Distributed Near-Field Channel Estimation for U6G XL-MIMO Systems under Beam Squint

Since the beam squint and near-field effects both inherently exist in upper-6 GHz (U6G) extremely large-scale multiple-input multiple-output (XL-MIMO) systems, wideband near-field channel estimation faces severe challenges, such as higher computational complexity, and higher pilot overhead particularly at hybrid architectures with fewer radio frequency (RF) chains. To precisely reduce the complexity and number of pilots, the parametric symmetry of wideband near-field channels is explored, such that the channel parameters, including angle, distance, and range, can be decoupled based on the delay variations observed by different antennas. Based on this, a distributed parametric symmetry-based (DPS) algorithm, applicable to U6G XL-MIMO, is proposed. The delays observed by different subarrays are estimated and extrapolated across the local processing units (LPUs) firstly, and then, the channel parameters are decoupled and estimated at the central processing unit (CPU), by only linearly combining the delays from different LPUs. The path gains are calculated at different LPUs, respectively, to reconstruct the channel with low complexity. Since the proposed algorithm does not rely on scanning the polar-domain dictionary, only a single pilot is required even with hybrid architectures. Furthermore, the computational complexity, multiple-path resolution, Cramer-Rao lower bound (CRLB) and lower bound (LB) of the estimates in hybrid architectures and the DPS algorithm, respectively, are analyzed, to evaluate the realizable potential of the proposed algorithm. The simulation results prove that the proposed algorithm has a higher estimation accuracy, while requiring less complexity and pilots.

eess.SP↗

arXiv2026

Quantum Simulation of Non-Unitary Dynamics via Amplitude-Phase Separation

Linear non-unitary dynamics arise in open quantum systems, non-Hermitian models, and numerical evolution problems, yet current quantum algorithms do not cleanly separate coherent and dissipative effects at the design level. We introduce Amplitude-Phase Separation (APS), a decomposition framework with two complementary forms: phase-driven APS isolates the unitary component and maps the remainder to a Hermitian problem, whereas amplitude-driven APS extracts the Hermitian component and treats the remaining interaction separately. For time-independent dynamics, the two routes capture complementary advantages within one framework: phase-driven APS yields additive rather than multiplicative tolerance dependence, while amplitude-driven APS yields square-root dissipative scaling in multiscale regimes. APS also provides a unified interpretation of representative methods, including LCHS (Linear Combination of Hamiltonian Simulation) and NDME (Non-Diagonal Density Matrix Encoding), and clarifies where coherent and dissipative bottlenecks enter non-unitary simulation. The benchmarks confirm the predicted crossover between phase-driven and amplitude-driven advantages in advection-diffusion and Bloch-relaxation models.

quant-ph↗

arXiv2026

SPA-MAE: A Physics-Guided CSI Foundation Model for Wireless Physical Layer

Deep learning (DL) has been widely used in future 6G physical layer communications, but task-specific DL models are difficult to generalize across different physical layer tasks. Recently emerging wireless foundation models demonstrate strong generalization capability. However, existing methods mainly adapt pretrained language/vision models or rely on CSI reconstruction objectives for pretraining, with limited use of channel knowledge, and thus have limited performance. To address this limitation, we propose SPA-MAE, a physics-guided wireless foundation model by exploiting the adapted MAE backbone and channel knowledge. A physical prior module is developed to provide two complementary guidance signals in the pretraining stage. Specifically, the parameter-aware guidance branch extracts features from explicit multipath parameters and encourages the encoder output to align them, while the structure-aware guidance branch encourages the encoder to capture the sparse transformed-domain CSI structure obtained after a 2D FFT. After end-to-end learning, the MAE encoder will be retained for downstream tasks. Experiments on four wireless tasks show that SPA-MAE outperforms state-of-the-art CSI foundation models with smaller number of parameters, especially under low-SNR and limited-data conditions.

cs.IT↗

arXiv2026

From Coverage to Sensing: ISAC meets FR3

Future 6G systems are expected to exploit upper midband spectrum in frequency range 3 (FR3) not only for high throughput communications, but also for sensing services such as localization, detection, and situational awareness. The following paper develops a concrete path from today's coverage-oriented deployments to FR3 networks that treat sensing as a native function. We first show how existing FR2 radars can be time-multiplexed and coordinated under a $6$G medium access control as radar-as-a-service, forming a bridge between legacy sensing and network-managed integrated sensing and communications (ISAC). We then propose a hierarchical FR3 beam-alignment strategy in which coarse access occurs at lower frequencies and refinement occurs at upper FR3, and quantify the resulting sensing and communication capabilities via range-angle Cram{é}r-Rao bounds in the near field. We identify intra- and inter-beam squint phenomena specific to wideband FR3 arrays, and discuss design approaches to mitigate them. On the signal-processing side, we argue that FR3 sensing cannot rely solely on pilot resources and discuss how much sensing information can be extracted from payload resource elements. We further highlight the role of calibrated FR3 channel simulators and real-time models as the core of wireless digital twins for training and evaluating ISAC algorithms, and discuss how massive MIMO and dense or distributed deployments at FR3 naturally act as large reconfigurable sensor arrays.

eess.SP↗

arXiv2026

CP-OFDM Achieves Lower Ranging CRB Than Frequency-Spread Waveforms in the Large-Sample Regime

The inherent randomness of communication symbols creates a fundamental tension in Integrated Sensing and Communications (ISAC). On the one hand, they enable data transmission while allowing sensing to fully reuse communication resources. On the other hand, their randomness induces waveform-dependent fluctuations that directly affect sensing accuracy. This paper investigates a foundational question arising from this tradeoff: \textit{How does the modulation waveform affect the ranging Cramér--Rao Bound (CRB) when sensing reuses random data symbols?} We address this question by revealing a structural factorization of the Fisher information matrix (FIM) for joint delay-amplitude estimation, which separates the deterministic Jacobian of the target geometry from the random frequency-domain signal power induced by the data symbols. This structure yields a Jensen-type universal lower bound on the CRB, which is exactly attained by CP-OFDM under PSK constellations. For QAM and broader sub-Gaussian constellations, we develop an asymptotic perturbation analysis of the inverse FIM and prove that, when the number of transmitted symbols $N$ grows large, CP-OFDM achieves a lower ranging CRB than any frequency-spread orthogonal waveform over the almost-sure event where the random FIM is invertible. This superiority is further extended to amplitude estimation and full joint delay-amplitude estimation. We also characterize the local geometry of the stochastic CRB minimization problem over the unitary group. The analysis reveals that CP-OFDM is a stationary point for finite $N$, and its Riemannian Hessian is positive semidefinite for sufficiently large $N$, establishing its asymptotic local optimality. Numerical results confirm that OFDM outperforms representative waveforms including SC, OTFS, and AFDM.

cs.IT↗

arXiv2026

XFreq-GS: Cross-Frequency Wireless Radiation Field Reconstruction with 3D Gaussian Splatting

Channel modeling is fundamental to the analysis, design, and optimization of wireless communication systems, which, however, accurate wireless channel modeling remains challenging, especially given the increasingly complex wireless environments. As an emerging paradigm, 3D Gaussian Splatting (3DGS)-based channel modeling methods achieve accurate wireless radiation field (WRF) reconstruction and high-fidelity spatial spectrum synthesis. However, existing works only consider a single carrier frequency and fail to adapt to wide-range cross-frequency channels. To address this challenge, we propose XFreq-GS, a cross-frequency Gaussian splatting framework for WRF reconstruction. It employs 3D Gaussian primitives with shared geometry and frequency-adaptive radio frequency (RF) attributes to reconstruct cross-frequency WRF, and synthesizes power angular spectrum (PAS) maps for wireless channel modeling. Experiments show that XFreq-GS outperforms state-of-the-art 3DGS-based methods in PAS synthesis and achieves superior cross-frequency generalization. Code is available at https://github.com/KINGAZ1019/XFreq-GS.

eess.SP↗

arXiv2026

Analytical Framework of Airy Beams in Near-Field XL-MIMO: From Ideal Optics to Wireless Reality

The synthesis of Airy-profiled wavefronts has emerged as a pivotal paradigm for advanced electromagnetic engineering, attributed to their intrinsic non-diffractive propagation, transverse self-acceleration, and structural self-healing properties. While the advent of extremely large-scale multiple-input multiple-output (XL-MIMO) and the elevation in frequency bands for sixth generation wireless systems provide the physical foundation for generating such structured beams, their wireless realization is fundamentally governed by hybrid precoding architectures, finite array apertures, and discrete antenna topologies. These constraints induce significant deviations from ideal optical Airy beam models, necessitating a rigorous re-characterization of Airy beams in practical wireless contexts. Consequently, this paper establishes an analytical theoretical framework to explicitly characterize Airy beam propagation in near-field XL-MIMO and derives the constraints on array aperture and antenna spacing to sustain distortion-free main lobe trajectories. Furthermore, quantitative metrics are developed to rigorously evaluate the performance trade-offs between Airy beams and Gaussian focusing beams, thereby providing systematic guidelines for their deployment in scenario-dependent wireless applications. Numerical results corroborate the proposed analytical theoretical framework of Airy beams in near-field XL-MIMO, and demonstrate the potential to achieve robust communication and spectral efficiency (SE) improvement in certain scenarios.

eess.SP↗

arXiv2026

Wideband Precoding for U6G XL-MIMO Systems: Beam Squint Boundaries and Channel Slicing

The unconventionally large aperture of extremely large-scale multiple-input multiple-output (XL-MIMO) arrays, in conjunction with the wider bandwidths in the upper-6 GHz (U6G) frequency bands, will very likely lead to non-negligible beam squint effects. In the context of a limited number of radio frequency (RF) chains, and by adopting hybrid precoding, the beams at different subcarriers may point to different positions and compromise the spectral efficiency (SE). Moreover, the existence of \textit{multiple paths} in U6G XL-MIMO channels also entails practical challenges for wideband precoding. It is therefore essential to ascertain whether the beam squint effect is pronounced for U6G XL-MIMO systems and design efficient wideband precoding schemes. To address these challenges, precise antenna-domain and frequency-domain wideband boundaries are derived from the near-field and far-field perspectives, respectively. These boundaries can inform the design of wideband precoding in future system settings. Subsequently, a channel slicing scheme is proposed for wideband precoding. The process involves the segmentation of U6G XL-MIMO channels into multiple blocks, with the objective of mitigating the beam squint effect for each path. The antenna-domain and frequency-domain slicing methods are developed for multipath and multiuser scenarios, respectively. The simulation results prove that the beam squint effect remains a significant issue for U6G XL-MIMO systems, while the near-field effect invariably precedes the beam squint effect as the array size and the bandwidth increase. In addition, the proposed scheme can greatly improve the SE.

eess.SP↗

arXiv2026

AI-Empowered Low-Altitude Economy: Cooperative Sensing With Fixed Wireless Access

The rapid growth of the low-altitude economy has intensified safety concerns arising from unauthorized unmanned aerial vehicles (UAVs), positioning UAV supervision as a key use case in 3GPP. To precisely sense such UAVs with wide coverage and low cost, we leverage fixed wireless access (FWA) customer premises equipment (CPEs), static, densely deployed devices that serve as wireless cameras for the radio environment. We develop an artificial intelligence-empowered two-stage cooperative sensing pipeline that exploits uplink channel state information (CSI) from multiple base station-CPE pairs for UAV detection and localization. In cooperative detection, lightweight CSI features are first individually extracted by neural network, and then adaptively integrated through an attention-based scheme to declare UAV presence. The learned attention scores effectively identify the critical pairs during detection, while facilitating UAV-affected pair selection for subsequent localization. For cooperative localization, neural network initially generates individual estimates and extract CSI features from selected pairs. These estimates, together with features and pair indexes, are fused using a Transformer to produce a precise cooperative estimate. Simulations show that cooperative schemes significantly reduce the missed detection probability to 0.63% and realize a 95%-confidence positioning error of 6.50 m, satisfying 3GPP requirements and showing the potential of FWA-assisted cooperative sensing. Dataset and codes are available on GitHub.

eess.SP↗

arXiv2026

Wireless Communication for Low-Altitude Economy with UAV Swarm Enabled Two-Level Movable Antenna System

Unmanned aerial vehicle (UAV) is regarded as a key enabling platform for low-altitude economy, due to its advantages such as 3D maneuverability, flexible deployment, and LoS air-to-air/ground communication links. In particular, the intrinsic high mobility renders UAV especially suitable for operating as a movable antenna (MA) from the sky. In this paper, by exploiting the flexible mobility of UAV swarm and antenna position adjustment of MA, we propose a novel UAV swarm enabled two-level MA system, where UAVs not only individually deploy a local MA array, but also form a larger-scale MA system with their individual MA arrays via swarm coordination. We formulate a general optimization problem to maximize the minimum achievable rate over all ground user equipments (UEs), by jointly optimizing the 3D UAV swarm placement positions, their individual MAs' positions, and receive beamforming for different UEs. To gain useful insights, we first consider the special case where each UAV has only one antenna, under different scenarios of one single UE, two UEs, and arbitrary number of UEs. In particular, for the two-UE case, we derive the optimal UAV swarm placement positions in closed-form that achieves IUI-free communication when the uniform plane wave (UPW) model holds, where the UAV swarm forms a uniform sparse array (USA) satisfying minimum safe distance constraint. While for the general case with arbitrary number of UEs, we propose an efficient alternating optimization algorithm to solve the formulated non-convex optimization problem. Then, we extend the results to the case where each UAV is equipped with multiple antennas. Numerical results verify that the proposed low-altitude UAV swarm enabled MA system significantly outperforms various benchmark schemes, thanks to the exploitation of two-level mobility to create more favorable channel conditions for multi-UE communications.

cs.IT↗

arXiv2026

Intention-Aware Semantic Agent Communications for AI Glasses

Smart glasses are emerging as a promising interface between humans and artificial intelligence (AI) agents, enabling first-person perception, contextual awareness, and real-time assistance. However, continuous offloading of visual data from wearable devices to cloud-based vision-language models (VLMs) is fundamentally constrained by limited wireless bandwidth and energy resources. This paper proposes an intention-aware semantic agent communication framework for AI glasses, where data transmission is guided by user intention rather than raw pixel fidelity. In the proposed architecture, AI glasses act as an edge semantic agent while a server-side VLM executes high-level cognition and reasoning. The user intention can be inferred by the server-side VLM through the current transmitted content and the historical prompts. Driven by specific user intentions, the glasses adaptively preserve textual content, document layout, or object semantics before transmission. We evaluate three representative scenarios with different lightweight preprocessing tools on the AI glasses. Simulation results demonstrate that intention-aware preprocessing significantly achieves more than 50% bandwidth reduction depending on the current task while maintaining task performance. Moreover, semantic transmission exhibits graceful degradation under low SNRs. The findings demonstrate that aligning communication resources with user intention is essential for robust and efficient wearable AI agent systems.

eess.SP↗

arXiv2026

Low-Altitude Wireless Networks: A Comprehensive Survey

The rapid development of the low-altitude economy has imposed unprecedented demands on wireless infrastructure to accommodate large-scale drone deployments and facilitate intelligent services in dynamic airspace environments. However, unlocking its full potential in practical applications presents significant challenges. Traditional aerial systems predominantly focus on air-ground communication services, often neglecting the integration of sensing, computation, control, and energy-delivering functions, which hinders the ability to meet diverse mission-critical demands. Besides, the absence of systematic low-altitude airspace planning and management exacerbates issues regarding dynamic interference in three-dimensional space, coverage instability, and scalability. To overcome these challenges, a comprehensive framework, termed low-altitude wireless network (LAWN), has emerged to seamlessly integrate communication, sensing, computation, control, and air traffic management into a unified design. This article provides a comprehensive overview of LAWN systems, introducing LAWN system fundamentals and the evolution of functional designs. Subsequently, we delve into performance evaluation metrics and review critical concerns surrounding privacy and security in the open-air network environment. Finally, we present the cutting-edge developments in airspace structuring and air traffic management, providing insights to facilitate the practical deployment of LAWNs.

eess.SP↗

arXiv2026

ContractSkill: Repairable Contract-Based Skills for Multimodal Web Agents

Self-generated skills for web agents are often unstable and can even hurt performance relative to direct acting. We argue that the key bottleneck is not only skill generation quality, but the fact that web skills remain implicit and therefore cannot be checked or locally repaired. To address this, we present ContractSkill, a framework that converts a draft skill into an executable artifact with explicit procedural structure, enabling deterministic verifica tion, fault localization, and minimal local repair. This turns skill refinement from full rewriting into localized editing of a single skill artifact. Experiments on VisualWebArena show that Contract Skill is effective in realistic web environments, while MiniWoB provides a controlled test of the mechanism behind the gain. Under matched transfer layers, repaired artifacts also remain reusable after removing the source model from the loop, providing evi dence of portability within the same benchmark family rather than full-benchmark generalization. These results suggest that the central challenge is not merely generating skills, but mak ing them explicit, executable, and repairable. Code is available at https://github.com/underfitting-lu/contractskill.git.

cs.SE↗