arXiv subjects

Shi-Yuan Ma

Publications and source records attributed to Shi-Yuan Ma.

13 recordsLinked to original sources

arXiv2026

Radio-Frequency Convolutional Neural Networks

Running artificial intelligence (AI) models directly on edge devices such as smartphones, wearables, and drones offers low latency, pervasive scalability, and data privacy, but these devices rarely carry the computing capability that modern neural networks demand. Edge accelerators have been developed in response, yet each adds computing hardware to devices already constrained in size, weight, power, and cost (SWaP-C). An alternative lies in what these devices already carry: the frequency mixer in every wireless radio multiplies signals in time, natively performing convolution in the frequency domain. Here we introduce radio-frequency convolutional neural networks (RF-CNNs), which repurpose existing communication hardware for CNN inference. Multi-channel convolutions are mapped onto frequency tones for a passive mixer to execute in a single pass. We experimentally demonstrate that RF-CNN runs deep CNNs up to 26.4 million parameters and nine layers from classification of wireless signals and images to controllable image generation, close to full-precision performance. Because the weights arrive over the air and the analog hardware is shared with communication, the edge device spends energy only on data preparation and readout-down to 0.72 femtojoules per multiply-accumulate, two orders of magnitude less than it would cost on an added digital processor. These results suggest that deployed wireless infrastructure can bring efficient, state-of-the-art AI inference to the billions of devices it already connects.

cs.LG↗

arXiv2026

18-dB on-chip vacuum squeezing in an adaptively poled lithium niobate waveguide

Quantum squeezed states of light can enhance measurement sensitivity beyond classical limits and enable quantum information processing, but scalable low-loss sources remain challenging. We demonstrate continuous-wave quantum squeezing on a chip, achieving 18 dB of squeezing and 20 dB of anti-squeezing at 1570 nm in a 1.6-cm traveling-wave adaptively poled thin-film lithium niobate waveguide. A distributed model independently determines facet losses, phase noise, and nonlinear interaction strength without prior assumptions, enabling rigorous inference of on-chip performance. We estimate a 95% confidence interval of [-18.96, -17.25] dB squeezing and [19.96, 21.35] dB anti-squeezing. These values represent the highest squeezing reported for any integrated photonic platform and the first assumption-free statistical validation of integrated squeezing performance. Our results establish thin-film lithium niobate as a high-performance, scalable platform for continuous-variable quantum sensing, communications, and photonic computing.

physics.optics↗

arXiv2026

Measurement-Adapted Eigentask Representations for Photon-Limited Optical Readout

Optical readout in low-light imaging is fundamentally limited by measurement noise, including photon shot noise, detector noise, and quantization error. In this regime, downstream inference depends not only on the optical front end, but also on how noisy high-dimensional sensor measurements are represented before classification or decision-making. Here we show that eigentasks provide a measurement-adapted representation for optical sensor outputs by ordering readout features according to their resolvability under noise. Using experimental data from a lens-based optical imaging system and a reanalysis of published data from a single-photon-detection neural network, we find that eigentask representations frequently outperform standard baselines including principal component analysis and filtering-based compression. The advantage is most pronounced in photon-limited, few-shot, and higher-difficulty classification regimes. In few-shot MPEG-7 classification, for example, the advantage over other methods reaches about 10 percentage points as the number of classes increases. In these settings, eigentasks yield more informative low-dimensional features and improve sample-efficient downstream learning. These results identify measurement-adapted representation as a promising strategy for optical inference when photon budget, acquisition time, and task complexity are constrained.

physics.optics↗

arXiv2026

Microring Perceptron Sensing for Low-Power Radio-Frequency Detection with Quantum-Compatible Photonic Preprocessing

Radio-frequency (RF) sensing underpins applications ranging from radar and wireless communication to biomedical and quantum measurement, where detection sensitivity at low signal-to-noise ratio (SNR) directly limits the achievable range, resolution, and information capacity. Machine learning has been widely applied to enhance sensing performance, but predominantly as post-detection analysis of already-acquired data. At low SNR, however, the information missing from acquired data cannot be recovered downstream, making pre-detection processing essential. Here we introduce microring perceptron (MiRP) sensing, a framework that exploits RF-photonic transduction in a microring resonator, where a programmable optical pump performs three-wave mixing to implement a learned mapping from the incoming RF signal to optical feature signals prior to detection. The transducer front end and digital neural-network back end are jointly optimized within a single end-to-end training pipeline, allowing the sensing system to learn an encoding that preserves task-relevant information through detection. Across benchmark tasks, MiRP sensing achieves substantially higher task performance than conventional processing at low input RF power levels where detection noise dominates. The algorithmic gain reported here offers an orthogonal axis of improvement that composes with, and amplifies the impact of, existing and future advances along complementary dimensions, including hardware efficiency and quantum-enhanced optical sensing.

eess.SP↗

arXiv2026

Ultra-low-light computer vision using trained photon correlations

Illumination using correlated photon sources has been established as an approach to allowing high-fidelity images to be reconstructed from noisy camera frames by taking advantage of the knowledge that signal photons are spatially correlated whereas detector clicks due to noise are uncorrelated. However, in computer-vision tasks, the goal is often not ultimately to reconstruct an image, but to make inferences about a scene -- such as what object is present. Here we show how correlated-photon illumination can be used to gain an advantage in a hybrid optical-electronic computer-vision pipeline for object recognition. We demonstrate correlation-aware training (CAT): end-to-end optimization of a trainable correlated-photon illumination source and a Transformer backend in a way that the Transformer can learn to benefit from the correlations, using a small number (<= 100) of shots. We show a classification accuracy enhancement of up to 15 percentage points over conventional, uncorrelated-illumination-based computer vision in ultra-low-light and noisy imaging conditions, as well as an improvement over using untrained correlated-photon illumination. Our work illustrates how specializing to a computer-vision task -- object recognition -- and training the pattern of photon correlations in conjunction with a digital backend allows us to push the limits of accuracy in highly photon-budget-constrained scenarios beyond existing methods focused on image reconstruction.

cs.CV↗

arXiv2026

Machine vision with small numbers of detected photons per inference

Machine vision, including object recognition and image reconstruction, is a central technology in many consumer devices and scientific instruments. The design of machine-vision systems has been revolutionized by the adoption of end-to-end optimization, in which the optical front end and the post-processing back end are jointly optimized. However, while machine vision currently works extremely well in moderate-light or bright-light situations -- where a camera may detect thousands of photons per pixel and billions of photons per frame -- it is far more challenging in very low-light situations. We introduce photon-aware neuromorphic sensing (PANS), an approach for end-to-end optimization in highly photon-starved scenarios. The training incorporates knowledge of the low photon budget and the stochastic nature of light detection when the average number of photons per pixel is near or less than 1. We report a proof-of-principle experimental demonstration in which we performed low-light image classification using PANS, achieving 73% (82%) accuracy on FashionMNIST with an average of only 4.9 (17) detected photons in total per inference, and 86% (97%) on MNIST with 8.6 (29) detected photons -- orders of magnitude more photon-efficient than conventional approaches. We also report simulation studies showing how PANS could be applied to other classification, event-detection, and image-reconstruction tasks. By taking into account the statistics of measurement results for non-classical states or alternative sensing hardware, PANS could in principle be adapted to enable high-accuracy results in quantum and other photon-starved setups.

physics.optics↗

arXiv2026

Quantum squeezing in an all-resonant periodically poled lithium niobate microresonator

Quantum noise limits the sensitivity of optical measurements, but squeezed states of light enable quantum-enhanced metrology, sensing, and information processing. Most on-chip squeezed-light sources rely on Kerr ($χ^{(3)}$) nonlinearities, remain limited by pump power and excess loss constraints. Quadratic ($χ^{(2)}$) platforms instead provide stronger parametric interactions, lower pump power requirements, and greater spectral engineering flexibility. Here, we demonstrate strong, broadband squeezed-light generation on a thin-film lithium niobate (TFLN) photonic chip using a dual-resonant optical parametric amplifier implemented in a single periodically poled LN (PPLN) microresonator. Near-full-depth domain inversion is achieved simultaneously with highly over-coupled resonances, exhibiting escape efficiencies exceeding 90% and intrinsic quality factors above 2.5 million in a 0.6 mm$^2$ X-cut TF-PPLN resonator, enabling efficient squeezing at 1587 nm when pumped at 793.5 nm. Operating in the continuous-wave regime, we directly measure -0.81 dB of squeezing below the shot-noise limit with a pump power of 27 mW, together with +4.29 dB of anti-squeezing. From these measurements, we infer an on-chip squeezing level of -7.52 dB $\pm$ 0.22 dB (95% confidence interval: [-7.96,-7.10] dB), and an on-chip anti-squeezing level of +9.62 dB $\pm$ 0.25 dB. We demonstrate single-mode squeezing at degeneracy with a squeezed-light spectrum exceeding 10.3 THz. This work reports the highest squeezing ratio among integrated $χ^{(2)}$ cavity platforms and the first quasi-phase matched, fully resonant $χ^{(2)}$ cavity squeezer on chip, establishing a scalable route to fully integrated power-efficient squeezed-light sources for quantum-enhanced sensing and metrology.

physics.optics↗

arXiv2025

Large-scale quantum reservoir computing using a Gaussian Boson Sampler

A Gaussian boson sampler (GBS) is a special-purpose quantum computer that can be practically realized at large scale in optics. Here we report on experiments in which we used a frequency-multiplexed GBS with $>400$ modes as the reservoir in the quantum-machine-learning approach of quantum reservoir computing. We evaluated the accuracy of our GBS-based reservoir computer on a variety of benchmark tasks, including spoken-vowels classification and MNIST handwritten-digit classification. We found that when the reservoir computer was given access to the correlations between measured modes of the GBS, the achieved accuracies were the same or higher than when it was only given access to the mean photon number in each mode -- and in several cases the advantage in accuracy from using the correlations was greater than 20 percentage points. This provides experimental evidence in support of theoretical predictions that access to correlations enhances the power of quantum reservoir computers. We also tested our reservoir computer when operating the reservoir with various sources of classical rather than squeezed (quantum) light and found that using squeezed light consistently resulted in the highest (or tied highest, for simple tasks) accuracies. Our work experimentally establishes that a GBS can be an effective reservoir for quantum reservoir computing and provides a practical platform for experimentally exploring the role of quantumness and correlations in quantum machine learning at very large system sizes.

quant-ph↗

arXiv2025

Quantum-limited stochastic optical neural networks operating at a few quanta per activation

Energy efficiency in computation is ultimately limited by noise, with quantum limits setting the fundamental noise floor. Analog physical neural networks hold promise for improved energy efficiency compared to digital electronic neural networks. However, they are typically operated in a relatively high-power regime so that the signal-to-noise ratio (SNR) is large, and the noise can be treated as a perturbation. We study optical neural networks where all layers except the last are operated in the limit that each neuron can be activated by just a single photon, and as a result the noise on neuron activations is no longer merely perturbative. We show that by using a physics-based probabilistic model of the neuron activations in training, it is possible to perform accurate machine-learning inference in spite of the extremely high shot noise (SNR ~ 1). We experimentally demonstrated MNIST handwritten-digit classification with a test accuracy of 98% using an optical neural network with a hidden layer operating in the single-photon regime; the optical energy used to perform the classification corresponds to just 0.038 photons per multiply-accumulate (MAC) operation. Our physics-aware stochastic training approach might also prove useful with non-optical ultra-low-power hardware.

physics.optics↗

arXiv2024

Highly multimode visible squeezed light with programmable spectral correlations through broadband up-conversion

Multimode squeezed states of light have been proposed as a resource for achieving quantum advantage in computing and sensing. Recent experiments that demonstrate multimode Gaussian states to this end have most commonly opted for spatial or temporal modes, whereas a complete system based on frequency modes has yet to be realized. Instead, we show how to use the frequency modes simultaneously squeezed in a conventional, single-spatial-mode, optical parametric amplifier when pumped by ultrashort pulses. Specifically, we show how adiabatic frequency conversion can be used not only to convert the quantum state from infrared to visible wavelengths, but to concurrently manipulate the joint spectrum. This near unity-efficiency quantum frequency conversion, over a bandwidth >45 THz and, to our knowledge, the broadest to date, allows us to measure the state with an electron-multiplying CCD (EMCCD) camera-based spectrometer, at non-cryogenic temperatures. We demonstrate the squeezing of >400 frequency modes, with a mean of approximately 700 visible photons per shot. Our work shows how many-mode quantum states of light can be generated, manipulated, and measured with efficient use of hardware resources -- in our case, using one pulsed laser, two nonlinear crystals, and one camera. This ability to produce, with modest hardware resources, large multimode squeezed states with partial programmability motivates the use of frequency encoding for photonics-based quantum information processing.

quant-ph↗

arXiv2023

Optical Transformers

The rapidly increasing size of deep-learning models has caused renewed and growing interest in alternatives to digital computers to dramatically reduce the energy cost of running state-of-the-art neural networks. Optical matrix-vector multipliers are best suited to performing computations with very large operands, which suggests that large Transformer models could be a good target for optical computing. To test this idea, we performed small-scale optical experiments with a prototype accelerator to demonstrate that Transformer operations can run on optical hardware despite noise and errors. Using simulations, validated by our experiments, we then explored the energy efficiency of optical implementations of Transformers and identified scaling laws for model performance with respect to optical energy usage. We found that the optical energy per multiply-accumulate (MAC) scales as $\frac{1}{d}$ where $d$ is the Transformer width, an asymptotic advantage over digital systems. We conclude that with well-engineered, large-scale optical hardware, it may be possible to achieve a $100 \times$ energy-efficiency advantage for running some of the largest current Transformer models, and that if both the models and the optical hardware are scaled to the quadrillion-parameter regime, optical computers could have a $>8,000\times$ energy-efficiency advantage over state-of-the-art digital-electronic processors that achieve 300 fJ/MAC. We analyzed how these results motivate and inform the construction of future optical accelerators along with optics-amenable deep-learning approaches. With assumptions about future improvements to electronics and Transformer quantization techniques (5$\times$ cheaper memory access, double the digital--analog conversion efficiency, and 4-bit precision), we estimated that optical computers' advantage against current 300-fJ/MAC digital processors could grow to $>100,000\times$.

cs.ET↗

arXiv2022

Image sensing with multilayer, nonlinear optical neural networks

Optical imaging is commonly used for both scientific and technological applications across industry and academia. In image sensing, a measurement, such as of an object's position, is performed by computational analysis of a digitized image. An emerging image-sensing paradigm breaks this delineation between data collection and analysis by designing optical components to perform not imaging, but encoding. By optically encoding images into a compressed, low-dimensional latent space suitable for efficient post-analysis, these image sensors can operate with fewer pixels and fewer photons, allowing higher-throughput, lower-latency operation. Optical neural networks (ONNs) offer a platform for processing data in the analog, optical domain. ONN-based sensors have however been limited to linear processing, but nonlinearity is a prerequisite for depth, and multilayer NNs significantly outperform shallow NNs on many tasks. Here, we realize a multilayer ONN pre-processor for image sensing, using a commercial image intensifier as a parallel optoelectronic, optical-to-optical nonlinear activation function. We demonstrate that the nonlinear ONN pre-processor can achieve compression ratios of up to 800:1 while still enabling high accuracy across several representative computer-vision tasks, including machine-vision benchmarks, flow-cytometry image classification, and identification of objects in real scenes. In all cases we find that the ONN's nonlinearity and depth allowed it to outperform a purely linear ONN encoder. Although our experiments are specialized to ONN sensors for incoherent-light images, alternative ONN platforms should facilitate a range of ONN sensors. These ONN sensors may surpass conventional sensors by pre-processing optical information in spatial, temporal, and/or spectral dimensions, potentially with coherent and quantum qualities, all natively in the optical domain.

physics.optics↗

arXiv2021

An optical neural network using less than 1 photon per multiplication

Deep learning has rapidly become a widespread tool in both scientific and commercial endeavors. Milestones of deep learning exceeding human performance have been achieved for a growing number of tasks over the past several years, across areas as diverse as game-playing, natural-language translation, and medical-image analysis. However, continued progress is increasingly hampered by the high energy costs associated with training and running deep neural networks on electronic processors. Optical neural networks have attracted attention as an alternative physical platform for deep learning, as it has been theoretically predicted that they can fundamentally achieve higher energy efficiency than neural networks deployed on conventional digital computers. Here, we experimentally demonstrate an optical neural network achieving 99% accuracy on handwritten-digit classification using ~3.2 detected photons per weight multiplication and ~90% accuracy using ~0.64 photons (~$2.4 \times 10^{-19}$ J of optical energy) per weight multiplication. This performance was achieved using a custom free-space optical processor that executes matrix-vector multiplications in a massively parallel fashion, with up to ~0.5 million scalar (weight) multiplications performed at the same time. Using commercially available optical components and standard neural-network training methods, we demonstrated that optical neural networks can operate near the standard quantum limit with extremely low optical powers and still achieve high accuracy. Our results provide a proof-of-principle for low-optical-power operation, and with careful system design including the surrounding electronics used for data storage and control, open up a path to realizing optical processors that require only $10^{-16}$ J total energy per scalar multiplication -- which is orders of magnitude more efficient than current digital processors.

physics.optics↗