arXiv subjects

Shibo Shu

Publications and source records attributed to Shibo Shu.

At least 19 recordsLinked to original sources

arXiv2026

Design, Fabrication and Characterization of Microwave Multiplexing SQUID Prototype

The readout system with a high multiplexing ratio has become a bottleneck limiting the application of large-scale Transition Edge Sensor (TES) detector arrays. In recent years, the microwave superconducting quantum interference device (SQUID) multiplexer has emerged as a key technology for effectively reading large-scale cryogenic detector arrays. Currently, the microwave SQUID multiplexer is being adopted by an increasing number of experiments due to its capability of achieving a multiplexing ratio of 2000:1 within the readout bandwidth. In this study, we developed and fabricated a 32-channel microwave SQUID multiplexer prototype. And we measured 8 channels of the prototype. The measured equivalent noise current of the prototype reached 42 pA/$\sqrt{Hz}$.

physics.ins-det↗

arXiv2026

Beyond One-Thousandth Energy Resolution with an AlMn TES Detector

The superconducting Transition-Edge Sensor (TES) is a critical technology for next-generation X-ray spectrometers, known for its exceptional energy resolution. In the last decade, TESs based on AlMn alloy films have been extensively used in several cosmic microwave background (CMB) experiments. The advantages of simple fabrication process and easily tunable critical temperature make them an alternative to bilayer TESs. However, they have rarely been applied to X-ray detection until now. We developed an annular AlMn TES for X-ray detection and tested it in a dilution refrigerator with a Superconducting Quantum Interference Device (SQUID) amplifier, achieving an Full Width at Half Maximum (FWHM) of 12.1 +- 0.3 eV at 17.48 keV. To the best of our knowledge, this is the first demonstration of an AlMn TES achieving an energy resolution below 0.1%, highlighting its potential for high-resolution X-ray detection.

astro-ph.IM↗

arXiv2025

Low-Frequency Noise Performance of Microstrip-Coupled Lumped-Element Aluminum KIDs using Hydrogenated Amorphous Silicon Parallel-Plate Capacitors for NEW-MUSIC

We present measurements of the low-frequency noise of microstrip-coupled, lumped-element aluminum kinetic inductance detectors that use hydrogenated amorphous silicon parallel-plate capacitors (Al/a-Si:H MS-PPC-LEKIDs), which are under development for the Next-generation Extended Wavelength Multiband Submillimeter Inductance Camera (NEW-MUSIC). We show that, under dark conditions, these devices are generation recombination (GR) noise dominated down to 0.1 Hz and, under optical load, they are likely dominated by GR and photon noise down to tenths of a Hz and possibly lower, both in spite of the use of a-Si:H PPCs. Our measurements set limits on the low-frequency two-level-system (TLS) noise of the a-Si:H material that are consistent with higher frequency measurements in the 0.1-10 kHz regime. These results establish that our MS-PPC-LEKID design for NEW-MUSIC will be photon-noise-limited under a range of observing conditions and, more generally, that a-Si:H PPC-KIDs are a viable new detector technology for even low modulation-rate applications such as astronomy.

astro-ph.IM↗

arXiv2025

Improved Modeling of Quasi-Static Thermal and Optical Response of Lumped-Element Aluminum Manganese KIDs

We report on the optical characterization of the AlMn kinetic inductance detectors (KIDs) in development for use in the Next-generation Extended Wavelength-MUltiband Sub/millimeter Inductance Camera (NEW-MUSIC) on the Leighton Chajnantor Telescope (LCT). NEW-MUSIC will cover 80-420 GHz, split into six spectral bands, with polarimetry. This broad spectral coverage will enable study of a range of scientific topics such as the accretion and feedback in galaxies and galaxy cluster evolution via the Sunyaev-Zeldovich effect, the transient synchrotron emission from the explosive deaths of massive stars and other time-domain phenomena, and dusty sources from low to high redshift (with polarization). Al KIDs have already been demonstrated for bands 2-5. AlMn KIDs will be used for the 90~GHz band, as Al's pair-breaking energy is too high. However, AlMn has only barely been explored as a KID material. To this end, we first improved the modeling techniques used for Al KIDs within BCS theory by eliminating the use of analytical approximations for the expressions of the complex conductivity and found these changes reduced fit parameter degeneracy in the analysis of AlMn. Then, we tested the addition of a gap smearing parameter, a standard extension to BCS theory in use for high kinetic inductance materials, and found it did not improve the fits.

astro-ph.IM↗

arXiv2025

Design of a Six-band, 2.4-Octave (80--420 GHz) Hierarchically Summed Phased-Array Slot-Dipole Antenna Array for NEW-MUSIC

The Next-generation Extended Wavelength Multi-band Sub/millimeter Inductance Camera (NEW-MUSIC), located on the Leighton Chajnantor Telescope (LCT), will be the first six-band trans-millimeter wave polarimeter. This paper proposes a broadband, hierarchical phased-array antenna with integrated band-defining filters necessary to realize NEW-MUSIC. It covers a spectral bandwidth of 2.4 octaves from 80~GHz to 420~GHz, a frequency range ideal for studying trans-millimeter emission from a range of time-domain sources, using the Sunyaev-Zeldovich effects to study hot plasmas in galaxy clusters and galaxies, and to observe dusty sources, from star-forming regions in our galaxy to high-redshift dusty, star-forming galaxies. To achieve these goals, three groups of superconducting lumped-element on-chip low-pass/band-pass filter-banks were designed to hierarchically sum the superconducting, broadband, non-resonant, slot-dipole antenna arrays and band-pass filter the trans-mm light before outputting it on microstripline to detectors (KIDs in the case of NEW-MUSIC).

astro-ph.IM↗

arXiv2025

Fabrication and characterization of AlMn alloy superconducting films for 0vbb experiments

Neutrinoless double-beta decay (0vbb) experiments constitute a pivotal probe for elucidating the characteristics of neutrinos and further discovering new physics. Compared to the neutron transmutation doped germanium thermistors (NTD-Ge) used in 0vbb experiments such as CUORE, transition edge sensors (TES) theoretically have a relatively faster response time and higher energy resolution. These make TES detectors good choice for next generation 0vbb experiments. In this paper, AlMn alloy superconducting films, the main components of TES, were prepared and studied. The relationship between critical temperature (Tc) and annealing temperature was established, and the impact of magnetic field on Tc was tested. The experimental results demonstrate that the Tc of AlMn film can be tuned in the required range of 10 - 20 mK by using the above methods, which is a key step for the application of AlMn TES in 0vbb experiment. In the test range, the Tc of AlMn film is sensitive to out-of-plane magnetic field but not to the in-plane magnetic field. Furthermore, we find that a higher annealing temperature results in a more uniform distribution of Mn ions in depth, which opens a new avenue for elucidating the underlying mechanism for tuning Tc.

hep-ex↗

arXiv2025

Fabrication and Characterization of X-ray TES Detectors Based on Annular AlMn Alloy Films

AlMn alloy flms are widely fabricated into superconducting transition edge sensors (TESs) for the detection of cosmic microwave background radiation. However, the application in X-ray or gamma-ray detection based on AlMn TES is rarely reported. In this study, X-ray TES detectors based on unique annular AlMn flms are devel-oped. The fabrication processes of TES detectors are introduced in detail. The char-acteristics of three TES samples are evaluated in a dilution refrigerator. The results demonstrate that the I-V characteristics of the three annular TES detectors are highly consistent. The TES detector with the smallest absorber achieved the best energy resolution of 11.0 eV @ 5.9 keV, which is inferior to the theoretical value. The dis-crepancy is mainly attributed to the larger readout electronics noise than expected.

physics.ins-det↗

arXiv2025

Development of 6-inch 80-170 GHz broadband silicon plated horn antenna arrays for primordial gravitational wave search

Searching for primordial gravitational wave in cosmic microwave background (CMB) polarization signal is one of the key topics in modern cosmology. Cutting-edge CMB telescopes requires thousands of pixels to maximize mapping speed. Using modular design, the telescope focal plane is simplified as several detector modules. Each module has hundreds of pixels including antenna arrays, detector arrays, and readout arrays. The antenna arrays, as the beam defining component, determine the overall optical response of the detector module. In this article, we present the developments of 6-inch broadband antenna arrays from 80GHz to 170GHz for the future IHEP focal plane module. The arrays are fabricated from 42 6-inch silicon wafers including 456 antennas, 7% more pixels than usual design. The overall in-band cross polarization is smaller than -20 dB and the in-band beam asymmetry is smaller than 10%, fulfilling the requirements for primordial gravitational wave search.

astro-ph.IM↗

arXiv2025

The Sliding Flux Ramp Demodulation Algorithm with High Sampling Rate in Microwave SQUID Multiplexer

Microwave SQUID Multiplexing (uMUX) is a widely used technique in the low temperature detectors community as it offers high capacity of reading out large scale Transition-Edge Sensor (TES) arrays. In this paper, we propose a Sliding Flux Ramp Demodulation (SFRD) algorithm for uMUX readout system. It can achieve a sampling rate in the order of MHz while maintaining a multiplexing ratio about one thousand. Advancing of this large array readout technique makes it possible to observe scientiffc objects with improved time resolution and event count rate. This will be highly helpful for TES calorimeters in X-ray applications, such as X-ray astrophysics missions.

hep-ex↗

arXiv2024

Cryogenic microwave performance of silicon nitride and amorphous silicon deposited using low-temperature ICPCVD

Fabrication of dielectrics at low temperature is required for temperature-sensitive detectors. For superconducting detectors, such as transition edge sensors and kinetic inductance detectors, AlMn is widely studied due to its variable superconducting transition temperature at different baking temperatures. Experimentally only the highest baking temperature determines AlMn transition temperature, so we need to control the wafer temperature during the whole process. In general, the highest process temperature happens during dielectric fabrication. Here, we present the cryogenic microwave performance of Si$_{3}$N$_{4}$, SiN$_{x}$ and $\alpha$-Si using ICPCVD at low temperature of 75 $^{\circ}$C. The dielectric constant, internal quality factor and TLS properties are studied using Al parallel plate resonators.

physics.ins-det↗

arXiv2024

NEW-MUSIC: The Next-generation Extended-Wavelength Multiband Sub/millimeter Inductance Camera

The Next-generation Extended Wavelength-MUltiband Sub/millimeter Inductance Camera (NEW-MUSIC) on the Leighton Chajnantor Telescope (LCT) will be a first-of-its-kind, six-band, transmillimeter-wave ("trans-mm") polarimeter covering 2.4 octaves of spectral bandwidth to open a new window on the trans-mm time-domain frontier, in particular new frontiers in energy, density, time, and magnetic field. NEW-MUSIC's broad spectral coverage will also enable the use of the Sunyaev-Zeldovich effects to study accretion, feedback, and dust content in the hot gaseous haloes of galaxies and galaxy clusters. Six-band spectral energy distributions, with polarization information, will yield new insights into stellar and planetary nurseries. NEW-MUSIC will employ hierarchical, phased arrays of polarization-sensitive superconducting slot-dipole antennas, coupled to photolithographic bandpass filters, to nearly optimally populate LCT's 14' field-of-view with six spectral bands over 80-420 GHz (1:5.25 spectral dynamic range; 2.4 octaves). Light will be routed to Al or AlMn microstripline-coupled, parallel-plate capacitor, lumped-element kinetic inductance detectors (MS-PPC-LEKIDs), an entirely new KID architecture that substantially enhances design flexibility while providing background-limited performance. Innovative, wide-bandwidth, etched silicon structures will be used to antireflection-treat the back-illuminated focal plane. NEW-MUSIC will cost-effectively reuse much of the MUSIC instrument, initially deploying a quarter-scale focal plane capable of the bulk of NEW-MUSIC science followed later by a full-FoV focal plane needed for NEW-MUSIC wide-area survey science.

astro-ph.IM↗

arXiv2024

Characterization of the low electric field and zero-temperature two-level-system loss in hydrogenated amorphous silicon

Two-level systems (TLS) are an important, if not dominant, source of loss and noise for superconducting resonators such as those used in kinetic inductance detectors and some quantum information science platforms. They are similarly important for loss in photolithographically fabricated superconducting mm-wave/THz transmission lines. For both lumped-element and transmission-line structures, native amorphous surface oxide films are typically the sites of such TLS in non-microstripline geometries, while loss in the (usually amorphous) dielectric film itself usually dominates in microstriplines. We report here on the demonstration of low TLS loss at GHz frequencies in hydrogenated amorphous silicon (a-Si:H) films deposited by plasma-enhanced chemical vapor deposition in superconducting lumped-element resonators using parallel-plate capacitors (PPCs). The values we obtain from two recipes in different deposition machines, 7$\,\times\,10^{-6}$ and 12$\,\times\,10^{-6}$, improve on the best achieved in the literature by a factor of 2--4 for a-Si:H and are comparable to recent measurements of amorphous germanium. Moreover, we have taken care to extract the true zero-temperature, low-field loss tangent of these films, accounting for temperature and field saturation effects that can yield misleading results. Such robustly fabricated and characterized films render the use of PPCs with deposited amorphous films a viable architecture for superconducting resonators, and they also promise extremely low loss and high quality factor for photolithographically fabricated superconducting mm-wave/THz transmission lines used in planar antennas and resonant filters.

physics.ins-det↗

arXiv2024

Hierarchical phased-array antennas coupled to Al KIDs: a scalable architecture for multi-band mm/submm focal planes

We present the optical characterization of two-scale hierarchical phased-array antenna kinetic inductance detectors (KIDs) for millimeter/submillimeter wavelengths. Our KIDs have a lumped-element architecture with parallel plate capacitors and aluminum inductors. The incoming light is received with a hierarchical phased array of slot-dipole antennas, split into 4 frequency bands (between 125 GHz and 365 GHz) with on-chip lumped-element band-pass filters, and routed to different KIDs using microstriplines. Individual pixels detect light for the 3 higher frequency bands (190-365 GHz) and the signals from four individual pixels are coherently summed to create a larger pixel detecting light for the lowest-frequency band (125-175 GHz). The spectral response of the band-pass filters was measured using Fourier transform spectroscopy (FTS), the far-field beam pattern of the phased-array antennas was obtained using an infrared source mounted on a 2-axis translating stage, and the optical efficiency of the KIDs was characterized by observing loads at 294 K and 77 K. We report on the results of these three measurements.

astro-ph.IM↗

arXiv2024

A ThermalKinetic Inductance Detectors Pixel Design for Cosmic Microwave Background Observations at 90/150 GHz bands

The highly sensitive millimeter-wave telescope is an important tool for accurate measurement of Cosmic Microwave Background (CMB) radiation, and its core component is a detector array located in a cryogenic focal plane. The feasibility of utilizing thermal kinetic inductance detectors (TKIDs) for CMB observations has been demonstrated. We propose a pixel design of TKIDs for observing CMB through atmospheric windows for observations in the 90/150 GHz bands. Assuming lossless dielectric, the coupling efficiency of a single pixel is around 90%. This pixel design will be utilized for future large-scale TKIDs array designs for CMB observations.

astro-ph.IM↗

arXiv2023

Demonstration of a Quantum Noise Limited Traveling-Wave Parametric Amplifier

Recent progress in quantum computing and the development of novel detector technologies for astrophysics is driving the need for high-gain, broadband, and quantum-limited amplifiers. We present a purely traveling-wave parametric amplifier (TWPA) using an inverted NbTiN microstrip and amorphous Silicon dielectric. Through dispersion engineering, we are able to obtain $50~\Omega$ impedance matching and suppress undesired parametric processes while phase matching the three-wave-mixing amplification across a large range of frequencies. The result is a broadband amplifier operating with 20 dB gain and quantum-limited noise performance at 20 mK. At the single frequency where the amplifier is phase sensitive, we further demonstrate 8 dB of vacuum noise squeezing.

quant-ph↗

arXiv2022

Design of microstrip-line coupled kinetic inductance detectors for near infrared astronomy

Kinetic inductance detectors (KID) have great potential in astronomical observation, such as searching for exoplanets, because of their low noise, fast response and photon counting characteristics. In this paper, we present the design process and simulation results of a microstrip line coupled KIDs array for near-infrared astronomical observation. Compared with coplanar waveguide (CPW) feedlines, microstrip feedlines do not require air bridges, which simplify fabrication process. In the design part, we mainly focus on the impedance transforming networks, the KID structure, and the frequency crosstalk simulations. The test array has a total of 104 resonators with 8 rows and 13 columns, which ranges from 4.899~GHz to 6.194~GHz. The pitch size is about 200~$\mu$m and the frequency crosstalk is less than 50~kHz in simulation.

astro-ph.IM↗

arXiv2022

Wideband Direct Detection Constraints on Hidden Photon Dark Matter with the QUALIPHIDE Experiment

We report direction detection constraints on the presence of hidden photon dark matter with masses between 20-30 ueV using a cryogenic emitter-receiver-amplifier spectroscopy setup designed as the first iteration of QUALIPHIDE (QUantum LImited PHotons In the Dark Experiment). A metallic dish sources conversion photons from hidden photon kinetic mixing onto a horn antenna which is coupled to a C-band kinetic inductance traveling wave parametric amplifier, providing for near quantum-limited noise performance. We demonstrate a first probing of the kinetic mixing parameter "chi" to just above 10^-12 for the majority of hidden photon masses in this region. These results not only represent stringent constraints on new dark matter parameter space but are also the first demonstrated use of wideband quantum-limited amplification for astroparticle applications

astro-ph.CO↗

arXiv2021

A kinetic inductance detectors array design for high background conditions at 150 GHz

We present a design for an array of kinetic inductance detectors (KIDs) integrated with phased array antennas for imaging at 150 GHz under high background conditions. The microstrip geometry KID detectors are projected to achieve photon noise limited sensitivity with larger than 100 pW absorbed optical power. Both the microstrip KIDs and the antenna feed network make use of a low-loss amorphous silicon dielectric. A new aspect of the antenna implementation is the use of a NbTiN microstrip feed network to facilitate impedance matching to the 50 Ohm antenna. The array has 256 pixels on a 6-inch wafer and each pixel has two polarizations with two Al KIDs. The KIDs are designed with a half wavelength microstrip transmission line with parallel plate capacitors at the two ends. The resonance frequency range is 400 to 800 MHz. The readout feedline is also implemented in microstrip and has an impedance transformer from 50 Ohm to 9 Ohm at its input and output.

astro-ph.IM↗