arXiv subjects

Shilpi Bhunia

Publications and source records attributed to Shilpi Bhunia.

6 recordsLinked to original sources

arXiv2026

The SKA as a Probe of Heliospheric Turbulence and Radio-wave Propagation Effects

Density turbulence in the heliosphere can impact traversing radio photons originating from anywhere in the universe, leading to distortions of both the spectroscopic and imaging properties of the radio sources. Extra-solar radio sources exhibit scintillation and angular broadening, while monochromatic signals from spacecraft are spectrally broadened. It was recently demonstrated that such impacts, referred to as radio-wave propagation effects, are particularly significant in observations of solar radio bursts excited through the plasma emission mechanism. A comparison of detailed observations with simulations is required in order to quantify the radio-wave propagation effects and disentangle the true radio-source properties from the observed ones, enabling the diagnosis of the heliospheric environment. Consequently, theoretical advancements and our ability to quantify the heliospheric turbulence depend on the quality and quantity of available observations. SKA pathfinders, like LOFAR, have been key to the significant progress recently achieved, but have also highlighted areas where the available observing capabilities are lacking. The SKA's unrivalled sensitivity will be crucial in identifying and distinguishing fine and faint radio structures, where our ability to model them defines whether we can accurately describe the heliospheric turbulence and deduce the fundamental properties of the radio sources. The SKA will be an indispensable tool in observing solar radio emissions from the Sun to beyond 1 au, complemented by ground-based interferometers that can reach frequencies down to the ionospheric cut-off at 10 MHz and space-based radio instruments which cover frequencies down to a few kHz.

astro-ph.SR↗

arXiv2026

Multiple shocks generated by the 2024 May 14 coronal mass ejection

This study characterises a series of type~II radio bursts associated with a CME that occurred on 14 May, focusing on the coronal conditions during the event and identifying the likely location of the shocks where the radio bursts are generated. The CME was tracked using a combination of white light and extreme ultraviolet observations of the solar corona taken by three instruments: GOES-SUVI, two coronagraphs of the SOHO-LASCO, together with ground-based radio observations between 10-240~MHz from I-LOFAR. The radial distances of the radio sources were examined using a series of density models, with both PFSS and MHD models used to examine the coronal plasma conditions. Four type~II bursts were identified in the I$-$LOFAR radio dynamic spectrum over $\sim$15~minutes, exhibiting features such as band splitting, herringbones, and fragmentation. The shocks were found to have speeds ranging between $\sim$443$-$2075~km s$^{-1}$, with drift rates of $\sim-$361 to -78~kHz~s$^{-1}$. The shocks were found to have a $M_A \approx$ 3.21$-$3.57. indicating that they were super-Alfvénic. The first type~II burst was triggered $\sim$18~minutes after the CME launch, with each burst appearing to have been generated at a different height in the corona. Analysis of the derived kinematics and modelling results suggests that the type~II bursts were likely produced at the shoulders of the CME near the flanks, where open magnetic field lines and relatively low Alfvén speeds facilitated shock formation. This multi-instrument study shows that multiple type II bursts from a single CME originated at different coronal heights, with modelling indicating their generation near the CME flanks, where low Alfvén speeds and open magnetic field lines facilitated shock formation.

astro-ph.SR↗

arXiv2025

Bursty acceleration and 3D trajectories of electrons in a solar flare

During a solar flare, electrons are accelerated to non-thermal energies as a result of magnetic reconnection. These electrons then propagate upwards and downwards from the energy release site along magnetic field lines and produce radio and X-ray emission. On 11 November 2022, an M5.1 solar flare was observed by the Spectrometer/Telescope for Imaging X-rays (STIX) on board Solar Orbiter together with various ground- and space-based radio instruments. The flare was associated with several fine hard X-ray (HXR) structures and a complex set of metric radio bursts (type III, J, and narrowband). By studying the evolution of X-ray, extreme ultraviolet, and radio sources, we aim to study the trajectories of the flare-accelerated electrons in the lower solar atmosphere and low corona. We used observations from the STIX on board Solar Orbiter to study the evolution of X-ray sources. Using radio imaging from the Nançay Radio heliograph (NRH) and the Newkirk density model, we constructed 3D trajectories of 14 radio bursts. Imaging of the HXR fine structures shows several sources at different times. The STIX and NRH imaging shows correlated changes in the location of the HXR and radio source at the highest frequency during the most intense impulsive period. Imaging and 3D trajectories of all the bursts show that electrons are getting accelerated at different locations and along several distinct field lines. The longitude and latitude extent of the trajectories are ~30 arcsec and ~ 152 arcsec. We find that the electrons producing HXR and radio emission have similar acceleration origins. Importantly, our study supports the scenario that the flare acceleration process is temporally and spatially fragmentary, and during each of these small-scale processes, the electron beams are injected into a very fibrous environment and produce complex HXR and radio emission.

astro-ph.SR↗

arXiv2025

Electron Beam Propagation and Radio-Wave Scattering in the Inner Heliosphere using Five Spacecraft

Solar energetic particles such as electrons can be accelerated to mildly-relativistic velocities in the solar corona. These electrons travel through the turbulent corona generating radio waves, which are then severely affected by scattering. The physical interpretation of the discrepancies between the actual and observed radio sources is still subject to debate. Here, we use radio emission observed by an unprecedented total of five spacecraft, to track the path of radio sources from the low corona to the inner heliosphere (15-75 R$_{\odot}$) generated during a solar event on 4 December 2021. In this study we use the Bayesian multilateration technique known as BELLA to track the apparent path of radio sources observed by Parker Solar Probe, STEREO A, Wind, Solar Orbiter and Mars Express. To validate the accuracy of the tracked path, we used Nançay Radioheliograph interferometric imaging at 150 MHz, which was found to agree with the estimated footpoints predicted by BELLA. We also further validated our results using ACE in-situ measurements. We found that the apparent radio sources followed the path of a Parker Spiral, with an associated solar wind velocity of approximately 493 km s-1 (consistent with the corresponding speed observed at 1 au at the relevant longitude) and connected to 75$^\circ$ longitude East at the solar surface. Finally, we made quantitative estimates of the scattering of radio waves that were found to be in good agreement with contemporary models of scattering. This work shows conclusive evidence that the disputed cause of the widely observed `higher than expected' electron densities at interplanetary distances is due to radio wave scattering, and provides a more detailed understanding of the propagation of radio waves emitted near the local plasma frequency in turbulent plasmas.

astro-ph.SR↗

arXiv2022

Imaging-spectroscopy of a band-split type II solar radio burst with the Murchison Widefield Array

Type II solar radio bursts are caused by magnetohydrodynamics (MHD) shocks driven by solar eruptive events such as Coronal Mass Ejections (CMEs). Often both fundamental and harmonic bands of type II bursts are split into sub-bands, generally believed to be coming from upstream and downstream regions of the shock; however this explanation remains unconfirmed. Here we present combined results from imaging analysis of type II radio burst band-splitting and other fine structures, observed by the Murchison Widefield Array (MWA) and extreme ultraviolet observations from Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA) on 2014-Sep-28. The MWA provides imaging-spectroscopy in the range of 80-300 MHz with a time resolution of 0.5 s and frequency resolution of 40 kHz. Our analysis shows that the burst was caused by a piston-driven shock with a driver speed of $\sim$112 km s$^{-1}$ and shock speed of $\sim$580 km s$^{-1}$. We provide rare evidence that band-splitting is caused by emission from multiple parts of the shock (as opposed to the upstream/downstream hypothesis). We also examine the small-scale motion of type II fine structure radio sources in MWA images. We suggest that this small-scale motion may arise due to radio propagation effects from coronal turbulence, and not because of the physical motion of the shock location. We present a novel technique that uses imaging spectroscopy to directly determine the effective length scale of turbulent density perturbations, which is found to be 1 - 2 Mm. The study of the systematic and small-scale motion of fine structures may therefore provide a measure of turbulence in different regions of the shock and corona.

astro-ph.SR↗

arXiv2022

Robust absolute solar flux density calibration for the Murchison Widefield Array

Sensitive radio instruments are optimized for observing faint astronomical sources, and usually need to attenuate the received signal when observing the Sun. There are only a handful of flux density calibrators which can comfortably be observed with the same attenuation setup as the Sun. Additionally, for wide field-of-view (FoV) instruments like the Murchison Widefield Array (MWA) calibrator observations are generally done when the Sun is below the horizon to avoid the contamination from solar emissions. These considerations imply that the usual radio interferometric approach to flux density calibration is not applicable for solar imaging. A novel technique, relying on a good sky model and detailed characterization of the MWA hardware, was developed for solar flux density calibration for MWA. Though successful, this technique is not general enough to be extended to the data from the extended configuration of the MWA Phase II. Here, we present a robust flux density calibration method for solar observations with MWA independent of the array configuration. We use different approaches -- the serendipitous presence of strong sources; detection of numerous background sources using high dynamic range images in the FoV along with the Sun and observations of strong flux density calibrators with and without the additional attenuation used for solar observations; to obtain the flux scaling parameters required for the flux density calibration. Using the present method, we have achieved an absolute flux density uncertainty $\sim10\%$ for solar observations even in the absence of dedicated calibrator observations.

astro-ph.SR↗