SearcharxivSearch

arXiv subjects

Shiro Saito

Publications and source records attributed to Shiro Saito.

At least 19 recordsLinked to original sources

Three-Dimensional Niobium Coaxial Cavity with $\sim0.1\,$second Lifetime

We report on the internal quality factor of a three-dimensional niobium quarter-wave coaxial cavity, with mid-temperature annealing, exhibiting $Q_{\rm int} \gtrsim 3\times10^9$ at the single-photon level below 20\,mK, which corresponds to an internal photon lifetime of $\tau_{\rm int}\sim90\,\mathrm{ms}$. Moreover, $Q_{\rm int}$ of the mid-temperature annealed cavities remains almost unchanged even after several cooldown cycles and air exposure. These results suggest that stable low-loss niobium oxides might be formed by mid-temperature annealing on the surface of three-dimensional niobium cavity. This surface treatment could be applicable to the fabrication of 2D superconducting circuits and help improve the lifetime of Nb-based superconducting qubits.

quant-ph

Superconducting flux qubit with ferromagnetic Josephson $π$-junction operating at zero magnetic field

Conventional superconducting flux qubits require the application of a precisely tuned magnetic field to set the operation point at half a flux quantum through the qubit loop, which complicates the on-chip integration of this type of device. It has been proposed that by inducing a $π$-phase shift in the superconducting order parameter using a precisely controlled nanoscale-thickness superconductor/ferromagnet/superconductor Josephson junction, commonly referred to as $π$-junction, it is possible to realize a flux qubit operating at zero magnetic flux. Here, we report the realization of a zero-flux-biased flux qubit based on three NbN/AlN/NbN Josephson junctions and a NbN/PdNi/NbN ferromagnetic $π$-junction. The qubit lifetime is in the microsecond range, which we argue is limited by quasiparticle excitations in the metallic ferromagnet layer. Our results pave the way for developing quantum coherent devices, including qubits and sensors, that utilize the interplay between ferromagnetism and superconductivity.

cond-mat.supr-con

Spin amplification in realistic systems

Spin amplification is the process that ideally increases the number of excited spins when one of them is excited initially. We show that by applying optimal control techniques to design classical drive pulse shapes, spin amplification can be achieved in a previously unexplored fast regime, with amplification times comparable to the intrinsic interaction timescale. This is an order of magnitude faster than the previous protocols and makes spin amplification possible even with significant decoherence and inhomogeneity in the spin system. The initial spin excitation can be delocalized over the entire ensemble, which is a more typical situation when a photon is collectively absorbed by the spins. We focus on the superconducting persistent-current artificial atoms and the Rydberg atoms as spins.

quant-ph

Identifying impurities in a silicon substrate by using a superconducting flux qubit

A bismuth-doped silicon substrate was analyzed by using a magnetometer based on a superconducting flux qubit. The temperature dependence of the magnetization indicates that the silicon substrate contains at least two signal sources, intentionally doped bismuth spins and a spin 1/2 system with a ratio of 0.873 to 0.127. In combination with a conventional electron spin resonance spectrometer, a candidate origin of the spin 1/2 system was identified as a dangling bond on the silicon surface. In addition, the spin sensitivity of the magnetometer was also estimated to be 12 spins/$\sqrt{\mathrm{Hz}}$ by using optimized dispersive readout.

quant-ph

Extremely large Lamb shift in a deep-strongly coupled circuit QED system with a multimode resonator

We report experimental and theoretical results on the extremely large Lamb shift in a multimode circuit quantum electrodynamics (QED) system in the deep-strong coupling (DSC) regime, where the qubit-resonator coupling strength is comparable to or larger than the qubit and resonator frequencies. The system comprises a superconducting flux qubit (FQ) and a quarter-wavelength coplanar waveguide resonator ($λ/4$ CPWR) that are coupled inductively through a shared edge that contains a Josephson junction to achieve the DSC regime. Spectroscopy is performed around the frequency of the fundamental mode of the CPWR, and the spectrum is fitted by the single-mode quantum Rabi Hamiltonian to obtain the system parameters. Since the qubit is also coupled to a large number of higher modes in the resonator, the single-mode fitting does not provide the bare qubit energy but a value that incorporates the renormalization from all the other modes. We derive theoretical formulas for the Lamb shift in the multimode resonator system. As shown in previous studies, there is a cut-off frequency $ω_{\rm{cutoff}}$ for the coupling between the FQ and the modes in the CPWR, where the coupling grows as $\sqrt{ω_n}$ for $ω_n/ω_{\rm{cutoff}}\ll 1$ and decreases as $1/\sqrt{ω_n}$ for $ω_n/ω_{\rm{cutoff}}\gg 1$. Here $ω_n$ is the frequency of the $n$th mode. The cut-off effect occurs because the qubit acts as an obstacle for the current in the resonator, which suppresses the current of the modes above $ω_{\rm{cutoff}}$ at the location of the qubit and results in a reduced coupling strength. Using our observed spectrum and theoretical formulas, we estimate that the Lamb shift from the fundamental mode is 82.3\% and the total Lamb shift from all the modes is 96.5\%.

quant-ph

Identification of different types of high-frequency defects in superconducting qubits

Parasitic two-level-system (TLS) defects are one of the major factors limiting the coherence times of superconducting qubits. Although there has been significant progress in characterizing basic parameters of TLS defects, exact mechanisms of interactions between a qubit and various types of TLS defects remained largely unexplored due to the lack of experimental techniques able to probe the form of qubit-defect couplings. Here we present an experimental method of TLS defect spectroscopy using a strong qubit drive that allowed us to distinguish between various types of qubit-defect interactions. By applying this method to a capacitively shunted flux qubit, we detected a rare type of TLS defect with a nonlinear qubit-defect coupling due to critical-current fluctuations, as well as conventional TLS defects with a linear coupling to the qubit caused by charge fluctuations. The presented approach could become the routine method for high-frequency defect inspection and quality control in superconducting qubit fabrication, providing essential feedback for fabrication process optimization. The reported method is a powerful tool to uniquely identify the type of noise fluctuations caused by TLS defects, enabling the development of realistic noise models relevant to noisy intermediate-scale quantum (NISQ) computing and fault-tolerant quantum control.

quant-ph

Effect of Decoherence for Gate Operations on a Superconducting Bosonic Qubit

High-quality-factor 3D cavities in superconducting circuits are ideal candidates for bosonic logical qubits as their fidelity is limited only by the low photon loss rate. However, the transmon qubits that are used to manipulate bosonic qubits result in the emergence of additional relaxation and dephasing channels. In this work, a numerical study is performed to elucidate the effect of the various loss channels on the performance of logical gates on a bosonic qubit. A gate error model is developed that encapsulates the loss mechanisms for arbitrary gate operations and predicts experimentally achievable gate errors for bosonic qubits. The insights gleaned from this study into loss mechanisms suggest more efficient optimization algorithms that could reduce gate errors on bosonic qubits.

quant-ph

Magnetometry of neurons using a superconducting qubit

We demonstrate magnetometry of cultured neurons on a polymeric film using a superconducting flux qubit that works as a sensitive magnetometer in a microscale area. The neurons are cultured in Fe$^{3+}$ rich medium to increase magnetization signal generated by the electron spins originating from the ions. The magnetometry is performed by insulating the qubit device from the laden neurons with the polymeric film while keeping the distance between them around several micrometers. By changing temperature (12.5 - 200 mK) and a magnetic field (2.5 - 12.5 mT), we observe a clear magnetization signal from the neurons that is well above the control magnetometry of the polymeric film itself. From electron spin resonance (ESR) spectrum measured at 10 K, the magnetization signal is identified to originate from electron spins of iron ions in neurons. This technique to detect a bio-spin system can be extended to achieve ESR spectroscopy at the single-cell level, which will give the spectroscopic fingerprint of cells.

quant-ph

Driven-state relaxation of a coupled qubit-defect system in spin-locking measurements

It is widely known that spin-locking noise-spectroscopy is a powerful technique for the characterization of low-frequency noise mechanisms in superconducting qubits. Here we show that the relaxation rate of the driven spin-locking state of a qubit can be significantly affected by the presence of an off-resonant high-frequency two-level-system defect. Thus, both low- and high-frequency defects should be taken into account in the interpretation of spin-locking measurements and other types of driven-state noise-spectroscopy.

quant-ph

Sequential nonabsorbing microwave single-photon detector

We propose a nonabsorbing microwave single-photon detector that uses an artificial atom as a coherent interaction mediator between a traveling photon and a high-Q resonator, fully exploiting the knowledge of the photon's arrival time. Our proposal can be implemented with the current level of technology and achieves distinguishability (probability of distinguishing between zero and one photon) in excess of 98% for realistic parameters. This is better than any of the similar detector proposals, even the ones using several artificial atoms.

quant-ph

Scalable quantum computation architecture using always-on Ising interactions via quantum feedforward

Here, we propose a way to control the interaction between qubits with always-on Ising interaction. Unlike the standard method to change the interaction strength with unitary operations, we fully make use of non-unitary properties of projective measurements so that we can effectively turn the interaction on or off via feedforward. Our scheme is useful to generate two- or three-dimensional cluster states that are universal resources for fault-tolerant quantum computation with this scheme, and it provides an alternative way to realize a scalable quantum pro

quant-ph

Control of transition frequency of a superconducting flux qubit by longitudinal coupling to the photon number degree of freedom in a resonator

We control transition frequency of a superconducting flux qubit coupled to a frequency-tunable resonator comprising a direct current superconducting quantum interference device (dc-SQUID) by microwave driving. The dc-SQUID mediates the coupling between microwave photons in the resonator and a flux qubit. The polarity of the frequency shift depends on the sign of the flux bias for the qubit and can be both positive and negative. The absolute value of the frequency shift becomes larger by increasing the photon number in the resonator. These behaviors are reproduced by a model considering the magnetic interaction between the flux qubit and dc-SQUID. The tuning range of the transition frequency of the flux qubit reaches $\approx$ 1.9 GHz, which is much larger than the ac Stark/Lamb shift observed in the dispersive regime using typical circuit quantum electrodynamics devices.

quant-ph

Electron Spin Resonance with up to 20 Spin Sensitivity Measured using a Superconducting Flux Qubit

We report on electron spin resonance spectroscopy measurements using a superconducting flux qubit with a sensing volume of 6 fl. The qubit is read out using a frequency-tunable Josephson bifurcation amplifier, which leads to an inferred measurement sensitivity of about 20 spins in a 1 s measurement. This sensitivity represents an order of magnitude improvement when compared with flux-qubit schemes using a dc-SQUID switching readout. Furthermore, noise spectroscopy reveals that the sensitivity is limited by flicker ($1/f$) flux noise.

quant-ph

A long-lived capacitively shunted flux qubit embedded in a 3D cavity

We report the experimental realization of a 3D capacitively-shunt superconducting flux qubit with long coherence times. At the optimal flux bias point, the qubit demonstrates energy relaxation times in the 60-90 $μ$s range, and Hahn-echo coherence time of about 80 $μ$s which can be further improved by dynamical decoupling. Qubit energy relaxation can be attributed to quasiparticle tunneling, while qubit dephasing is caused by flux noise away from the optimal point. Our results show that 3D c-shunt flux qubits demonstrate improved performance over other types of flux qubits which is advantageous for applications such as quantum magnetometry and spin sensing.

quant-ph

Nuclear magnetic resonance spectroscopy with a superconducting flux qubit

We theoretically analyze the performance of the nuclear magnetic resonance (NMR) spectroscopy with a superconducting flux qubit (FQ). Such NMR with the FQ is attractive because of the possibility to detect the relatively small number of nuclear spins in a local region ($\simμ$m) with low temperatures ($\sim$ mK) and low magnetic fields ($\sim$ mT), in which other types of quantum sensing schemes cannot easily access. A sample containing nuclear spins is directly attached on the FQ, and the FQ is used as a magnetometer to detect magnetic fields from the nuclear spins. Especially, we consider two types of approaches to NMR with the FQ. One of them is to use spatially inhomogeneous excitations of the nuclear spins, which are induced by a spatially asymmetric driving with radio frequency~(RF) pulses. Such an inhomogeneity causes a change in the DC magnetic flux penetrating a loop of the FQ, which can be detected by a standard Ramsey measurement on the FQ. The other approach is to use a dynamical decoupling on the FQ to measure AC magnetic fields induced by Larmor precession of the nuclear spins. In this case, neither a spin excitation nor a spin polarization is required since the signal comes from fluctuating magnetic fields of the nuclear spins. We calculate the minimum detectable density (number) of the nuclear spins for the FQ with experimentally feasible parameters. We show that the minimum detectable density (number) of the nuclear spins with these approaches is around $10^{21}$ /cm$^3$ ($10^8$) with an accumulation time of a second.

quant-ph

Bandwidth analysis of AC magnetic field sensing based on electronic spin double resonance of nitrogen-vacancy centers in diamond

Recently we have demonstrated AC magnetic field sensing scheme using a simple continuous-wave optically detected magnetic resonance of nitrogen-vacancy centers in diamond [Appl. Phys. Lett. 113, 082405 (2018)]. This scheme is based on electronic spin double resonance excited by continuous microwaves and radio-frequency (RF) fields. Here we measured and analyzed the double resonance spectra and magnetic field sensitivity for various frequencies of microwaves and RF fields. As a result, we observed a clear anticrossing of RF-dressed electronic spin states in the spectra and estimated the bandwidth to be approximately 5 MHz at the center frequency of 9.9 MHz.

quant-ph

Demonstration of vector magnetic field sensing by simultaneous control of nitrogen-vacancy centers in diamond using multi-frequency microwave pulses

An ensemble of nitrogen-vacancy (NV) centers in diamond is a fascinating candidate to realize a sensitive magnetic field sensor. In particular, since the axes of the NV centers are distributed along four directions, a collection of measurement data from NV centers with different axes provides information on the vector components of a magnetic field. However, in the conventional approach, the low measurement contrast of NV centers limits the sensitivity of vector magnetic field sensing. Recently, to overcome this problem, multi-frequency control of the NV centers has been proposed. The key idea is that the four types of NV centers with different axes are simultaneously controlled by multi-frequency microwave pulses. Here, we demonstrate vector magnetic field sensing with an ensemble of NV centers in diamond via such multi-frequency control with pulsed-type measurements. We use Hahn echo pulses and extract information on the vector components of an applied AC magnetic field. We find that the sensitivity of diamond-based vector field sensing with multi-frequency control is better than that with single-frequency control for every vector component of a magnetic field.

quant-ph

One-way transfer of quantum states via decoherence

In many quantum information processing applications, it is important to be able to transfer a quantum state from one location to another - even within a local device. Typical approaches to implement the quantum state transfer rely on unitary evolutions or measurement feedforward operations. However, these existing schemes require accurate pulse operations and/or precise timing controls. Here, we propose a one-way transfer of the quantum state with near unit efficiency using dissipation from a tailored environment. After preparing an initial state, the transfer can be implemented without external time dependent operations. Moreover, our scheme is irreversible due to the non-unitary evolution, and so the transferred state remains in the same site once the system reaches the steady state. This is in stark contrast to the unitary state transfer where the quantum states continue to oscillate between different sites. Our novel quantum state transfer via the dissipation paves the way towards robust and practical quantum control.

quant-ph