arXiv subjects

Shiv J. Singh

Publications and source records attributed to Shiv J. Singh.

24 records · Page 2Linked to original sources

arXiv2023

Comparison of Gd addition effect on the superconducting properties of FeSe0.5Te0.5 bulks under ambient and high-pressure conditions

We have prepared a series of (FeSe0.5Te0.5 + xGd) bulk samples, with x = 0, 0.03, 0.05, 0.07, 0.1 and 0.2, through the convenient solid-state reaction method at ambient pressure (CSP). High gas pressure and high-temperature synthesis methods (HP-HTS) are also applied to grow the parent compound (x = 0) and 5-wt% of Gd-added bulks. Structural, microstructural, transport and magnetic characterizations have been performed on these samples in order to draw the final conclusion. Our analysis results that the HP-HTS applied for the parent compound enhances the transition temperature (Tc) and the critical current density (Jc) with the improved sample density and intergrain connections. The lattice parameter c is increased with Gd additions, suggesting a small amount of Gd enters the tetragonal lattice of FeSe0.5Te0.5 and the Gd interstitial sites are along the c-axis. A systematic decrease of the onset transition temperature Tc is observed with Gd additions, however, the calculated Jc of these Gd-added samples is almost the same as that of the parent compound prepared by CSP. It specifies that there is no improvement of the grain connections or pinning properties due to these rare earth additions. However, Gd-added FeSe0.5Te0.5 bulks prepared by HP-HTS have revealed a slightly improved critical current density due to improved grain connections and sample density but have a lower transition temperature than that of the parent compounds.

cond-mat.supr-con↗

arXiv2023

High gas pressure and high-temperature synthesis (HP-HTS) technique and its impact on iron-based superconductors

The high-pressure growth technique generally plays an important role in the improvement of the sample quality and the enhancement of various physical and magnetic properties of materials. The high gas pressure technique provides a large sample space (10-15 cm) to grow various kinds of materials. In this paper, we introduce the high gas pressure and high-temperature synthesis (HP-HTS) technique that is present at our institute and is applied to the growth process of different kinds of superconducting materials, particularly iron-based superconductors. More details and the working principle of this HP-HTS technique are discussed. We have also demonstrated the current results based on the iron-based superconductors by using this unique HP-HTS technique. These results demonstrate the enhancement of the superconducting properties with the improved sample quality compared to the conventional synthesis process at ambient pressure.

cond-mat.supr-con↗

arXiv2023

Effect of Pb addition on microstructure, transport properties and the critical current density in a polycrystalline FeSe0.5Te0.5

We have investigated the effects of lead (Pb) additions (x) up to 40 wt.% (x = 0-0.4) on the structure, electrical properties, and magnetic properties of FeSe0.5Te0.5 superconductor. The samples were prepared by the solid-state reaction method and characterized by various techniques. The parent compound (x = 0) showed the onset temperature Tc onset of 15 K, and zero-resistance temperature, Tc offset of 12 K. The addition of Pb enhances the metallic characteristics of FeSe0.5Te0.5, but both Tc onset and Tc offset are decreased to the lower temperature with the broadened transition width. The Tc onset is nearly the same (10.3 K) at higher additions, such as x = 0.3 and 0.4, but zero resistivity is not observed up to 7 K. Microstructural analysis and transport studies suggest that for x > 0.05, Pb additions weakened the coupling between grains and suppressed the superconducting percolation, leading to a broad transition. More importantly, the inclusion of a relatively small amount of Pb (x = 0.05) increased the critical current density, Jc, in the entire magnetic field, which might be attributable to better phase uniformity as well as good grain connectivity.

cond-mat.supr-con↗

arXiv2023

Cometal addition effect on superconducting properties and granular behaviours of polycrystalline FeSe0.5Te0.5

The enhanced performance of superconducting FeSe0.5Te0.5 materials with added microsized Pb and Sn particles is presented. A series of Pb and Sn added FeSe0.5Te0.5 (FeSe0.5Te0.5 + xPb + ySn; x = y = 0-0.1) bulks are fabricated by solid-state reaction method and characterized through various measurements. A very small amount of Sn and Pb additions enhance the transition temperature (Tconset) of pure FeSe0.5Te0.5 by 1 K, sharpening the superconducting transition and improving the metallic nature in the normal state, whereas larger metal additions reduce Tconset by broadening the superconducting transition. Microstructural analysis and transport studies suggest that at x=y>0.02, Pb and Sn additions enhance the impurity phases, reduce the coupling between grains, and suppress the superconducting percolation, leading to a broad transition. FeSe0.5Te0.5 samples with 2wt% of cometal additions show the best performance with their critical current density, Jc, and the pinning force, Fp, which might be attributable to providing effective flux pinning centres. Our study shows that the inclusion of a relatively small amount of Pb and Sn works effectively for the enhancement of superconducting properties with an improvement of intergrain connections as well as better phase uniformity.

cond-mat.supr-con↗

arXiv2023

High-pressure synthesis and the enhancement of the superconducting properties of FeSe0.5Te0.5

A series of FeSe0.5Te0.5 bulk samples have been prepared through the high gas pressure and high-temperature synthesis (HP-HTS) method to optimize the growth conditions, for the first time and investigated for their superconducting properties using structural, microstructure, transport, and magnetic measurements to reach the final conclusions. Ex-situ and in-situ processes are used to prepare bulk samples under a range of growth pressures using Ta-tube and without Tatube. The parent compound synthesized by convenient synthesis method at ambient pressure (CSP) exhibits a superconducting transition temperature of 14.8 K. Our data demonstrate that the prepared FeSe0.5Te0.5 sealed in a Ta-tube is of better quality than the samples without a Ta-tube, and the optimum growth conditions (500 MPa, 600°C for 1 h) are favourable for the development of the tetragonal FeSe0.5Te0.5 phase. The optimum bulk FeSe0.5Te0.5 depicts a higher transition temperature of 17.3 K and a high critical current density of the order of >10^4 A/cm^2 at 0 T, which is improved over the entire magnetic field range and almost twice higher than the parent compound prepared through CSP. Our studies confirm that the high-pressure synthesis method is a highly efficient way to improve the superconducting transition, grain connectivity, sample density, and also pinning properties of a superconductor.

cond-mat.supr-con↗

arXiv2018

Ultra-high critical current densities, the vortex phase diagram and the effect of granularity of the stoichiometric high-Tc superconductor, CaKFe$_4$As$_4$

We present a comprehensive study of the critical current densities and the superconducting vortex phase diagram in the stoichiometric superconductor CaKFe$_4$As$_4$ which has a critical temperature of 35 K. We performed detailed magnetization measurements both of high quality single crystals for different orientations in an applied magnetic field up to 16 T and for a powder sample. We find an extremely large critical current density, Jc, up to 10$^8$ A/cm2 for single crystals when H||(ab) at 5 K, which remains robust in fields up to 16 T, being the largest of any other iron-based superconductor. The critical current density is reduced by a factor 10 in single crystals when H||c at 5 K and significantly suppressed by the presence of grain boundaries in the powder sample. We also observe the presence of the fishtail effect in the magnetic hysteresis loops of single crystals when H||c. The flux pinning force density and the pinning parameters suggest that the large critical current could be linked to the existence of point core and surface pinning. Based on the vortex phase diagram and the large critical current densities, CaKFe$_4$As$_4$ is now established as a potential iron-based superconductor candidate for practical applications.

cond-mat.supr-con↗