arXiv subjects

Shiyin Li

Publications and source records attributed to Shiyin Li.

28 records · Page 2Linked to original sources

arXiv2022

Optimal Power Allocation for Integrated Visible Light Positioning and Communication System with a Single LED-Lamp

In this paper, we investigate an integrated visible light positioning and communication (VLPC) system with a single LED-lamp. First, by leveraging the fact that the VLC channel model is a function of the receiver's location, we propose a system model that estimates the channel state information (CSI) based on the positioning information without transmitting pilot sequences. Second, we derive the Cramer-Rao lower bound (CRLB) on the positioning error variance and a lower bound on the achievable rate with on-off keying modulation. Third, based on the derived performance metrics, we optimize the power allocation to minimize the CRLB, while satisfying the rate outage probability constraint. To tackle this non-convex optimization problem, we apply the worst-case distribution of the Conditional Value-at-Risk (CVaR) and the block coordinate descent (BCD) methods to obtain the feasible solutions. Finally, the effects of critical system parameters, such as outage probability, rate threshold, total power threshold, are revealed by numerical results.

cs.IT↗

arXiv2022

Covert Beamforming Design for Integrated Radar Sensing and Communication Systems

We propose covert beamforming design frameworks for integrated radar sensing and communication (IRSC) systems, where the radar can covertly communicate with legitimate users under the cover of the probing waveforms without being detected by the eavesdropper. Specifically, by jointly designing the target detection beamformer and communication beamformer, we aim to maximize the radar detection mutual information (MI) (or the communication rate) subject to the covert constraint, the communication rate constraint (or the radar detection MI constraint), and the total power constraint. For the perfect eavesdropper's channel state information (CSI) scenario, we transform the covert beamforming design problems into a series of convex subproblems, by exploiting semidefinite relaxation, which can be solved via the bisection search method. Considering the high complexity of iterative optimization, we further propose a single-iterative covert beamformer design scheme based on the zero-forcing criterion. For the imperfect eavesdropper's CSI scenario, we develop a relaxation and restriction method to tackle the robust covert beamforming design problems. Simulation results demonstrate the effectiveness of the proposed covert beamforming schemes for perfect and imperfect CSI scenarios.

cs.IT↗

arXiv2022

Robust Beamforming for Localization-Aided Millimeter Wave Communication Systems

In this letter, we investigate a robust beamforming problem for localization-aided millimeter wave (mmWave) communication systems. To handle this problem, we propose a novel restriction and relaxation (R&R) method. The proposed R&R method aims at minimizing the total transmit power while the positioning error follows a Gaussian distribution. Specifically, in the restriction phase of R&R, the probabilistic constraint is transformed into the deterministic form by using the Bernsteintype inequality. In the relaxation phase of R&R, the non-convex optimization problem is reformulated into a convex semidefinite program (SDP) by using semidefinite relaxation (SDR) and firstorder Taylor expansion methods. To the best of our knowledge, we first consider the impact of the distribution of the positioning error on the channel state information (CSI), which further influences the data rate. Numerical results present the trade-off of the beamforming between the communication and positioning.

cs.IT↗

arXiv2022

Spectral and Energy Efficiency of DCO-OFDM in Visible Light Communication Systems with Finite-Alphabet Inputs

The bound of the information transmission rate of direct current biased optical orthogonal frequency division multiplexing (DCO-OFDM) for visible light communication (VLC) with finite-alphabet inputs is yet unknown, where the corresponding spectral efficiency (SE) and energy efficiency (EE) stems out as the open research problems. In this paper, we derive the exact achievable rate of {the} DCO-OFDM system with finite-alphabet inputs for the first time. Furthermore, we investigate SE maximization problems of {the} DCO-OFDM system subject to both electrical and optical power constraints. By exploiting the relationship between the mutual information and the minimum mean-squared error, we propose a multi-level mercury-water-filling power allocation scheme to achieve the maximum SE. Moreover, the EE maximization problems of {the} DCO-OFDM system are studied, and the Dinkelbach-type power allocation scheme is developed for the maximum EE. Numerical results verify the effectiveness of the proposed theories and power allocation schemes.

cs.IT↗

arXiv2021

Optimal Discrete Constellation Inputs for Aggregated LiFi-WiFi Networks

In this paper, we investigate the performance of a practical aggregated LiFi-WiFi system with the discrete constellation inputs from a practical view. We derive the achievable rate expressions of the aggregated LiFi-WiFi system for the first time. Then, we study the rate maximization problem via optimizing the constellation distribution and power allocation jointly. Specifically, a multilevel mercy-filling power allocation scheme is proposed by exploiting the relationship between the mutual information and minimum mean-squared error (MMSE) of discrete inputs. Meanwhile, an inexact gradient descent method is proposed for obtaining the optimal probability distributions. To strike a balance between the computational complexity and the transmission performance, we further develop a framework that maximizes the lower bound of the achievable rate where the optimal power allocation can be obtained in closed forms and the constellation distributions problem can be solved efficiently by Frank-Wolfe method. Extensive numerical results show that the optimized strategies are able to provide significant gains over the state-of-the-art schemes in terms of the achievable rate.

cs.IT↗

arXiv2021

Covert Beamforming Design for Intelligent Reflecting Surface Assisted IoT Networks

In this paper, we consider covert beamforming design for intelligent reflecting surface (IRS) assisted Internet of Things (IoT) networks, where Alice utilizes IRS to covertly transmit a message to Bob without being recognized by Willie. We investigate the joint beamformer design of Alice and IRS to maximize the covert rate of Bob when the knowledge about Willie's channel state information (WCSI) is perfect and imperfect at Alice, respectively. For the former case, we develop a covert beamformer under the perfect covert constraint by applying semidefinite relaxation. For the later case, the optimal decision threshold of Willie is derived, and we analyze the false alarm and the missed detection probabilities. Furthermore, we utilize the property of Kullback-Leibler divergence to develop the robust beamformer based on a relaxation, S-Lemma and alternate iteration approach. Finally, the numerical experiments evaluate the performance of the proposed covert beamformer design and robust beamformer design.

cs.IT↗

arXiv2021

Spectral and Energy Efficiency of ACO-OFDM in Visible Light Communication Systems

In this paper, we study the spectral efficiency (SE) and energy efficiency (EE) of asymmetrically clipped optical orthogonal frequency division multiplexing (ACO-OFDM) for visible light communication (VLC). Firstly, we derive the achiev-able rates for Gaussian distributions inputs and practical finite-alphabet inputs. Then, we investigate the SE maximization problems subject to both the total transmit power constraint and the average optical power constraint with the above two inputs, respectively. By exploiting the relationship between the mutual information and the minimum mean-squared error, an optimal power allocation scheme is proposed to maximize the SE with finite-alphabet inputs. To reduce the computational complexity of the power allocation scheme, we derive a closed-form lower bound of the SE. Also, considering the quality of service, we further tackle the non-convex EE maximization problems of ACO-OFDM with the two inputs, respectively. The problems are solved by the proposed Dinkelbach-type iterative algorithm. In each iteration, the interior point algorithm is applied to obtain the optimal power allocation.The performance of the proposed power allocation schemes for the SE and EE maximization are validated through numerical analysis.

cs.IT↗

arXiv2021

Robust Beamforming Design for Covert Communications

In this paper, we consider a common unicast beamforming network where Alice utilizes the communication to Carol as a cover and covertly transmits a message to Bob without being recognized by Willie. We investigate the beamformer design of Alice to maximize the covert rate to Bob when Alice has either perfect or imperfect knowledge about Willie's channel state information (WCSI). For the perfect WCSI case, the problem is formulated under the perfect covert constraint, and we develop a covert beamformer by applying semidefinite relaxation and the bisection method. Then, to reduce the computational complexity, we further propose a zero-forcing beamformer design with a single iteration processing. For the case of the imperfect WCSI, the robust beamformer is developed based on a relaxation and restriction approach by utilizing the property of Kullback-Leibler divergence. Furthermore, we derive the optimal decision threshold of Willie, and analyze the false alarm and the missed detection probabilities in this case. Finally, the performance of the proposed beamformer designs is evaluated through numerical experiments.

cs.IT↗

arXiv2019

Signal Demodulation with Machine Learning Methods for Physical Layer Visible Light Communications: Prototype Platform, Open Dataset and Algorithms

In this paper, we investigate the design and implementation of machine learning (ML) based demodulation methods in the physical layer of visible light communication (VLC) systems. We build a flexible hardware prototype of an end-to-end VLC system, from which the received signals are collected as the real data. The dataset is available online, which contains eight types of modulated signals. Then, we propose three ML demodulators based on convolutional neural network (CNN), deep belief network (DBN), and adaptive boosting (AdaBoost), respectively. Specifically, the CNN based demodulator converts the modulated signals to images and recognizes the signals by the image classification. The proposed DBN based demodulator contains three restricted Boltzmann machines (RBMs) to extract the modulation features. The AdaBoost method includes a strong classifier that is constructed by the weak classifiers with the k-nearest neighbor (KNN) algorithm. These three demodulators are trained and tested by our online open dataset. Experimental results show that the demodulation accuracy of the three data-driven demodulators drops as the transmission distance increases. A higher modulation order negatively influences the accuracy for a given transmission distance. Among the three ML methods, the AdaBoost modulator achieves the best performance.

eess.SP↗

arXiv2019

Deep Learning for Signal Demodulation in Physical Layer Wireless Communications: Prototype Platform, Open Dataset, and Analytics

In this paper, we investigate deep learning (DL)-enabled signal demodulation methods and establish the first open dataset of real modulated signals for wireless communication systems. Specifically, we propose a flexible communication prototype platform for measuring real modulation dataset. Then, based on the measured dataset, two DL-based demodulators, called deep belief network (DBN)-support vector machine (SVM) demodulator and adaptive boosting (AdaBoost) based demodulator, are proposed. The proposed DBN-SVM based demodulator exploits the advantages of both DBN and SVM, i.e., the advantage of DBN as a feature extractor and SVM as a feature classifier. In DBN-SVM based demodulator, the received signals are normalized before being fed to the DBN network. Furthermore, an AdaBoost based demodulator is developed, which employs the $k$-Nearest Neighbor (KNN) as a weak classifier to form a strong combined classifier. Finally, experimental results indicate that the proposed DBN-SVM based demodulator and AdaBoost based demodulator are superior to the single classification method using DBN, SVM, and maximum likelihood (MLD) based demodulator.

eess.SP↗