arXiv subjects

Shomik Verma

Publications and source records attributed to Shomik Verma.

6 recordsLinked to original sources

arXiv2025

High emissivity, thermally robust emitters for high power density thermophotovoltaics

Thermal radiative energy transport is essential for high-temperature energy harvesting technologies, including thermophotovoltaics (TPVs) and grid-scale thermal energy storage. However, the inherently low emissivity of conventional high-temperature materials constrains radiative energy transfer, thereby limiting both system performance and technoeconomic viability. Here, we demonstrate ultrafast femtosecond laser-material interactions to transform diverse materials into near-blackbody surfaces with broadband spectral emissivity above 0.96. This enhancement arises from hierarchically engineered light-trapping microstructures enriched with nanoscale features, effectively decoupling surface optical properties from bulk thermomechanical properties. These laser blackened surfaces (LaBS) exhibit exceptional thermal stability, retaining high emissivity for over 100 hours at temperatures exceeding 1000{\deg}C, even in oxidizing environments. When applied as TPV thermal emitters, Ta LaBS double electrical power output from 2.19 to 4.10 W cm-2 at 2200{\deg}C while sustaining TPV conversion efficiencies above 30%. This versatile, largely material-independent technique offers a scalable and economically viable pathway to enhance emissivity for advanced thermal energy applications.

cond-mat.mtrl-sci↗

arXiv2024

Thermophotovoltaic performance metrics and techno-economics: efficiency vs. power density

Thermophotovoltaics (TPV) are a promising new approach for converting heat to electricity. Their performance is primarily characterized by two metrics: efficiency and power density. While recent works have shown high efficiency, it is important to understand how both of these metrics impact the techno-economics of a TPV system as efforts to commercialize the technology advance. In this work, we develop the first unification of efficiency and power density into a single techno-economic metric based on the levelized cost of electricity (LCOE). We find that the LCOE can be broken into two parts: heating cost, including infrastructure and inputs for providing heat to the TPV cells, and cell cost, the capital cost of the TPV cells. We show that systems with high heating costs should prioritize TPV efficiency, while systems with high cell costs should prioritize power density. We then develop a model to identify the most impactful cell properties in improving the important performance metric and reducing system LCOE. Namely, improving spectral control with increased back-surface reflectance is the most effective to reduce LCOE in systems with high infrastructural costs, while increasing the view factor and reducing front-surface reflectance are most critical in systems with high TPV cell cost. Improving just one or two of these properties can reduce the LCOE by 25-75%, reaching competitive values ~ 8 cents/kWh-e, less than the average cost of electricity in the US. This study thus elucidates which TPV performance metric is more important for system technoeconomics and how to maximize it.

physics.app-ph↗

arXiv2024

Designing for effective heat transfer in a solid thermal energy storage system

Thermal energy storage using sensible heating of a solid storage medium is a potential low-cost technology for long-duration energy storage. To effectively get heat in and out of the solid material, channels of heat transfer fluid can be embedded within the storage material. Here we present design principles to improve performance of channel-embedded thermal energy storage systems, and we apply these principles to a high-temperature system using graphite as the storage material and liquid tin as the heat transfer fluid. We first analyze the impact of geometry and material properties on the performance of the system, determining the ideal channel spacing and length to achieve high (dis)charge temperature uniformity. We then analyze how controlling the fluid flowrate, heating infrastructure, and heat engine can increase discharge power uniformity and accelerate charging. Finally, we model 100 high-temperature graphite storage blocks using a porous media approximation and implement the developed design principles to demonstrate significant improvement in performance for both discharging (constant discharge power for >90% of rated duration) and charging (>90% charged within 4 hours). Overall, the hierarchical design procedure presented here enables the design of cheap yet high-performing solid thermal energy storage systems.

physics.app-ph↗

arXiv2023

High-temperature thermal conductivity measurements of macro-porous graphite

Graphite is a unique material for high temperature applications and will likely become increasingly important as we attempt to electrify industrial applications. However, high-quality graphite can be expensive, limiting the cost-competitiveness of high-quality graphite technologies. Here, we investigate the thermal properties of low-cost, low-quality, macro-porous graphite to determine the tradeoff between cost and thermal performance. We use laser flash analysis (LFA) to measure the thermal diffusivity of graphite at high temperatures. However, due to the large pores in the graphite samples preventing uniform laser flash heating, we must apply a thick coating to achieve the required flat, parallel surfaces for LFA measurements. The presence of the coating directly impacts the measured diffusivity, not only because of the added thickness but also because of the sample/coating interface profile generated. We therefore develop a methodology based on finite element modeling of a variety of sample/coating interface profiles to extract properties of the sample. Validating the methodology against a reference sample demonstrates a mean absolute percentage error of 8.5%, with potential improvement with better sample characterization. We show low-cost, low-quality graphite has a thermal conductivity of ~10 W/m/K up to 1000$^{\circ}$C, which is an order of magnitude lower than high-quality graphite, but contributions from photon conductivity may result in higher conductivities at higher temperatures. Overall, we demonstrate an approach for measuring thermal properties of macro-porous materials at high temperatures, and apply the approach to measuring thermal conductivity of porous graphite, which will aid in the design of high-temperature systems for cost-competitive decarbonization.

cond-mat.mtrl-sci↗

arXiv2023

Power Availability of PV plus Thermal Batteries in real-world electric power grids

As variable renewable energy sources comprise a growing share of total electricity generation, energy storage technologies are becoming increasingly critical for balancing energy generation and demand. In this study, we modeled an existing thermal energy storage unit with estimated capital costs that are sufficiently low to enable large-scale deployment in the electric power system. Our analysis emphasizes the value of using such units to cost-effectively improve renewable energy dispatchability. This study modeled an existing real-world grid rather than simulating hypothetical future electric power systems. The storage unit coupled with a photovoltaic (PV) system was modeled with different storage capacities, whereas each storage unit size had various discharge capacities. The modeling was performed under a baseline case with no emission constraints and under hypothetical scenarios in which CO$_2$ emissions were reduced. The results show that power availability increases with increasing storage size and vastly increases in the hypothetical CO$_2$ reduction scenarios, as the storage unit is utilized differently. When CO$_2$ emissions are reduced, the power system must be less dependent on fossil fuel technologies that currently serve the grid, and thus rely more on the power that is served from the PV + storage unit. The proposed approach can provide increased knowledge to power system planners regarding how adding PV + storage systems to existing grids can contribute to the efficient stepwise decarbonization of electric power systems.

math.DS↗

arXiv2021

Thermophotovoltaic Efficiency of 40%

We report the fabrication and measurement of thermophotovoltaic (TPV) cells with efficiencies of >40%, which is a record high TPV efficiency and the first experimental demonstration of the efficiency of high-bandgap tandem TPV cells. TPV efficiency was determined by simultaneous measurement of electric power output and heat dissipation from the device via calorimetry. The TPV cells are two-junction devices comprising high-quality III-V materials with band gaps between 1.0 and 1.4 eV that are optimized for high emitter temperatures of 1900-2400°C. The cells exploit the concept of band-edge spectral filtering to obtain high efficiency, using high-reflectivity back surface reflectors to reject unusable sub-bandgap radiation back to the emitter. A 1.4/1.2 eV device reached a maximum efficiency of (41.1 +/- 1)% operating at a power density of 2.39 W/cm2 under an irradiance of 30.4 W/cm2 and emitter temperature of 2400°C. A 1.2/1.0 device reached a maximum efficiency of (39.3 +/- 1)% operating at a power density of 1.8 W/cm2 under an irradiance of 20.1 W/cm2 and emitter temperature of 2127°C. These cells can be integrated into a TPV system for thermal energy grid storage (TEGS) to enable dispatchable renewable energy. These new TPV cells enable a pathway for TEGS to reach sufficiently high efficiency and sufficiently low cost to enable full decarbonization of the grid. Furthermore, the high demonstrated efficiency also gives TPV the potential to compete with turbine-based heat engines for large-scale power production with respect to both cost and performance, thereby enabling possible usage in natural gas or hydrogen-fueled electricity production.

physics.app-ph↗