arXiv subjects

Shota Nagayama

Publications and source records attributed to Shota Nagayama.

26 records · Page 2Linked to original sources

arXiv2018

Analysis of Measurement-based Quantum Network Coding over Repeater Networks under Noisy Conditions

Quantum network coding is an effective solution for alleviating bottlenecks in quantum networks. We introduce a measurement-based quantum network coding scheme for quantum repeater networks (MQNC), and analyze its behavior based on results acquired from Monte-Carlo simulation that includes various error sources over a butterfly network. By exploiting measurement-based quantum computing, operation on qubits for completing network coding proceeds in parallel. We show that such an approach offers advantages over other schemes in terms of the quantum circuit depth, and therefore improves the communication fidelity without disturbing the aggregate throughput. The circuit depth of our protocol has been reduced by 56.5% compared to the quantum network coding scheme (QNC) introduced in 2012 by Satoh, et al. For MQNC, we have found that the resulting entangled pairs' joint fidelity drops below 50% when the accuracy of local operations is lower than 98.9%, assuming that all initial Bell pairs across quantum repeaters have a fixed fidelity of 98%. Overall, MQNC showed substantially higher error tolerance compared to QNC and slightly better than buffer space multiplexing using step-by-step entanglement swapping, but not quite as strong as simultaneous entanglement swapping operations.

quant-ph↗

arXiv2018

The Network Impact of Hijacking a Quantum Repeater

In quantum networking, repeater hijacking menaces the security and utility of quantum applications. To deal with this problem, it is important to take a measure of the impact of quantum repeater hijacking. First, we quantify the workload of each quantum repeater with regards to each quantum communication. Based on this, we show the costs for repeater hijacking detection using distributed quantum state tomography and the amount of work loss and rerouting penalties caused by hijacking. This quantitive evaluation covers both purification-entanglement swapping and quantum error correction repeater networks. Naive implementation of the checks necessary for correct network operation can be subverted by a single hijacker to bring down an entire network. Fortunately, the simple fix of randomly assigned testing can prevent such an attack.

quant-ph↗

arXiv2018

Surface Code Error Correction on a Defective Lattice

The yield of physical qubits fabricated in the laboratory is much lower than that of classical transistors in production semiconductor fabrication. Actual implementations of quantum computers will be susceptible to loss in the form of physically faulty qubits. Though these physical faults must negatively affect the computation, we can deal with them by adapting error correction schemes. In this paper We have simulated statically placed single-fault lattices and lattices with randomly placed faults at functional qubit yields of 80%, 90% and 95%, showing practical performance of a defective surface code by employing actual circuit constructions and realistic errors on every gate, including identity gates. We extend Stace et al.'s superplaquettes solution against dynamic losses for the surface code to handle static losses such as physically faulty qubits. The single-fault analysis shows that a static loss at the periphery of the lattice has less negative effect than a static loss at the center. The randomly-faulty analysis shows that 95% yield is good enough to build a large scale quantum computer. The local gate error rate threshold is $\sim 0.3\%$, and a code distance of seven suppresses the residual error rate below the original error rate at $p=0.1\%$. 90% yield is also good enough when we discard badly fabricated quantum computation chips, while 80% yield does not show enough error suppression even when discarding 90% of the chips. We evaluated several metrics for predicting chip performance, and found that the average of the product of the number of data qubits and the cycle time of a stabilizer measurement of stabilizers gave the strongest correlation with post-correction residual error rates. Our analysis will help with selecting usable quantum computation chips from among the pool of all fabricated chips.

quant-ph↗

arXiv2017

Distributed Quantum Computing Utilizing Multiple Codes on Imperfect Hardware

Quantum bits have technological imperfections. Additionally, the capacity of a component that can be implemented feasibly is limited. Therefore, distributed quantum computation is required to scale up quantum computers. This dissertation presents a new quantum computer architecture which takes into account imperfections, aimed to realize distributed computation by connecting quantum computers each of which consists of multiple quantum CPUs and memories. Quantum CPUs employ a quantum error correcting code which has faster logical gates and quantum memories employ a code which is superior in space resource requirements. This dissertation focuses on quantum error correcting codes, giving a practical, concrete method for tolerating static losses such as faulty devices for the surface code. Numerical simulation with practical assumptions showed that a yield of functional qubits of 90% is marginally capable of building large-scale systems, by culling the poorer 50% of lattices during post-fabrication testing. Yield 80% is not usable even when culling 90% of generated lattices. For internal connections in a quantum computer and for connections between quantum computers, this dissertation gives a fault-tolerant method that bridges heterogeneous quantum error correcting codes. Numerical simulation showed that the scheme, which discards any quantum state in which any error is detected, always achieves an adequate logical error rate regardless of physical error rates in exchange for increased resource consumption. This dissertation gives a new extension of the surface code suitable for memories. This code is shown to require fewer physical qubits to encode a logical qubit than conventional codes. This code achieves the reduction of 50% physical qubits per a logical qubit. Collectively, the elements to propose the distributed quantum computer architecture are brought together.

quant-ph↗

arXiv2017

Optimizing Timing of High-Success-Probability Quantum Repeaters

Optimizing a connection through a quantum repeater network requires careful attention to the photon propagation direction of the individual links, the arrangement of those links into a path, the error management mechanism chosen, and the application's pattern of consuming the Bell pairs generated. We analyze combinations of these parameters, concentrating on one-way error correction schemes (1-EPP) and high success probability links (those averaging enough entanglement successes per round trip time interval to satisfy the error correction system). We divide the buffering time (defined as minimizing the time during which qubits are stored without being usable) into the link-level and path-level waits. With three basic link timing patterns, a path timing pattern with zero unnecessary path buffering exists for all $3^h$ combinations of $h$ hops, for Bell inequality violation experiments (B class) and Clifford group (C class) computations, but not for full teleportation (T class) computations. On most paths, T class computations have a range of Pareto optimal timing patterns with a non-zero amount of path buffering. They can have optimal zero path buffering only on a chain of links where the photonic quantum states propagate counter to the direction of teleportation. Such a path reduces the time that a quantum state must be stored by a factor of two compared to Pareto optimal timing on some other possible paths.

quant-ph↗

arXiv2016

State injection, lattice surgery and dense packing of the deformation-based surface code

Resource consumption of the conventional surface code is expensive, in part due to the need to separate the defects that create the logical qubit far apart on the physical qubit lattice. We propose that instantiating the deformation-based surface code using superstabilizers makes it possible to detect short error chains connecting the superstabilizers, allowing us to place logical qubits close together. Additionally, we demonstrate the process of conversion from the defect-based surface code, which works as arbitrary state injection, and a lattice surgery-like CNOT gate implementation that requires fewer physical qubits than the braiding CNOT gate. Finally we propose a placement design for the deformation-based surface code and analyze its resource consumption; large scale quantum computation requires $\frac{25}{4}d^2 +5d + 1$ physical qubits per logical qubit where $d$ is the code distance, whereas the planar code requires $16d^2 -16d + 4$ physical qubits per logical qubit, for a reduction of about 55%.

quant-ph↗

arXiv2016

Analysis of Quantum Network Coding for Realistic Repeater Networks

Quantum repeater networks have attracted attention for the implementation of long-distance and large-scale sharing of quantum states. Recently, researchers extended classical network coding, which is a technique for throughput enhancement, into quantum information. The utility of quantum network coding (QNC) has been shown under ideal conditions, but it has not been studied previously under conditions of noise and shortage of quantum resources. We analyzed QNC on a butterfly network, which can create end-to-end Bell pairs at twice the rate of the standard quantum network repeater approach. The joint fidelity of creating two Bell pairs has a small penalty for QNC relative to entanglement swapping. It will thus be useful when we care more about throughput than fidelity. We found that the output fidelity drops below 0.5 when the initial Bell pairs have fidelity F < 0.90, even with perfect local gates. Local gate errors have a larger impact on quantum network coding than on entanglement swapping.

quant-ph↗

arXiv2015

Interoperability in encoded quantum repeater networks

The future of quantum repeater networking will require interoperability between various error correcting codes. A few specific code conversions and even a generalized method are known, however, no detailed analysis of these techniques in the context of quantum networking has been performed. In this paper, we analyze a generalized procedure to create Bell pairs encoded heterogeneously between two separate codes used often in error corrected quantum repeater network designs. We begin with a physical Bell pair, then encode each qubit in a different error correcting code, using entanglement purification to increase the fidelity. We investigate three separate protocols for preparing the purified encoded Bell pair. We calculate the error probability of those schemes between the Steane [[7,1,3]] code, a distance three surface code and single physical qubits by Monte Carlo simulation under a standard Pauli error model, and estimate the resource efficiency of the procedures. A local gate error rate of $10^{-3}$ allows us to create high-fidelity logical Bell pairs between any of our chosen codes. We find that a postselected model, where any detected parity flips in code stabilizers result in a restart of the protocol, performs the best.

quant-ph↗