arXiv subjects

Shruti Puri

Publications and source records attributed to Shruti Puri.

At least 19 recordsLinked to original sources

arXiv2026

Walking Floquet code circuits for zero-overhead leakage reduction

Leakage, occurring when a qubit undetectably exits the computational subspace, poses a significant challenge for quantum error correction by inducing correlated errors in space and time. These correlations reduce both the code threshold and the effective code distance. To address this challenge, we introduce two zero-overhead walking circuits for the honeycomb Floquet code (hFC), termed the swirling and sliding circuits, which periodically remove leakage while dynamically protecting logical qubits via a schedule of anticommuting two-body measurements. Unlike previous dynamic circuits for the hFC, ours preserves the distance to Pauli errors. We further study their performance under leakage and find that, for two leakage noise models, they may correct as many leakage errors as Pauli errors, improving on the more widely known walking surface code. Through numerical simulation, we observe that finite-error-rate performance under leakage is strongly influenced by entropic effects, producing a pronounced waterfall regime in which the logical error rate decreases much more rapidly with physical error rate than the expected distance-limited scaling. In this regime, even when asymptotic predictions suggest otherwise, the hFC can outperform the same-distance walking surface code in error rates and sub-threshold logical error scaling.

quant-ph↗

arXiv2026

Erasure surface code circuit without mid-circuit erasure checks

Quantum error correction (QEC) codes can correct twice as many erasure errors as Pauli errors. Because of this scaling advantage, there is significant interest in developing qubits whose dominant error channel can be converted into erasures via mid-circuit erasure checks. However, such erasure checks come with hardware overhead in practice. End-of-the-line three-state readout, in which one simultaneously measures a qubit's erasure status and computational state, is an alternative to mid-circuit erasure checks that is generally simpler to implement. In this work, we systematically study the conditions required to enable erasure performance---the doubled error-correction capacity---in the surface code with and without mid-circuit erasure checks. We introduce the moonwalking surface code, the time-reversal of the walking surface code, as a zero-overhead circuit with superior handling of leakage and erasure. Specifically, we show that it enables erasure-like logical error rate scaling when combined with three-state measurement if leaked qubits cause two-qubit gates to be skipped and an appropriate decoder is used. Our decoder, based on a branch-and-bound algorithm, specifically incorporates the noise structure of the skip-gate leaked-qubit effect.

quant-ph↗

arXiv2026

Untangling QLDPC Codes with Biased Noise Ancilla

Remarkable technical progress has made high-rate, high-distance, quantum low-density parity-check codes (QLDPC) promising candidates for scalable quantum computing. However, it is hard to design low-depth syndrome extraction circuits that do not spread errors from ancilla qubits to multiple data qubits, also known as hook errors, for general QLDPC codes. Additionally, widely used decoders for these codes based on belief propagation are impaired due to short loops in the Tanner graph. Here, we investigate a hardware-aware approach to avoid these hooks and loops using biased noise ancillas. Using examples of bicycle bivariate codes and a cyclic hypergraph product code, which have been widely considered for practical application, we show that the effective fault-distance of the conventional syndrome extraction circuit can be significantly higher and the number of short loops can be significantly lower when the ancillas are subject to phase-flip errors only, compared to when they are also subject to bit-flip errors. This can result in almost an order of magnitude improvement in the logical error rate at circuit noise of $2\times 10^{-3}$ and when bit-flip errors in the ancilla are 50 times less likely than phase-flip errors. Our work demonstrates a significant and practical quantum error correction advantage with biased noise qubits in which full-bias cannot be maintained.

quant-ph↗

arXiv2026

Logical qubits with erasure conversion using metastable neutral atoms

Implementing large-scale quantum algorithms with practical advantage will require fault-tolerance achieved through quantum error correction, but the associated overhead is prohibitive. This overhead can be reduced by engineering physical qubits with fewer errors, and by shaping the residual errors to be more easily correctable. In this work, we demonstrate quantum error correcting codes and logical qubit circuits in a metastable ytterbium-171 nuclear spin qubit with a noise bias towards erasure errors. These errors can be located separately from any syndrome information diagnosing the error, and we demonstrate adaptive circuit execution based on erasure information. We show that dephasing errors on the qubit during coherent transport can be strongly suppressed, and implement entangling gates that maintain a high fidelity in the presence of gate beam inhomogeneity or pointing errors. Furthermore, we demonstrate logical qubit encoding in the [[4, 2, 2]] code, with error correction during decoding based on mid-circuit erasure measurements despite the fact that the code is too small to correct any Pauli errors. Finally, we demonstrate logical qubit teleportation between multiple code blocks with conditionally selected ancillas based on mid-circuit erasure checks, a key part of leakage-robust error correction schemes using neutral atoms.

quant-ph↗

arXiv2026

Hardware-Efficient Erasure Qubits With Superconducting Transmon Qutrits

Quantum error correction using erasure qubits offers higher fault-tolerant thresholds and improved scaling by converting dominant physical errors into detectable erasures. In superconducting circuits, erasure qubits can be constructed using the dual-rail approach, which, however, requires additional qubit-count overhead and tailored coupling elements. Here, we demonstrate a hardware-efficient scheme that operates transmon qutrits as erasure qubits, which is compatible with standard superconducting circuit-QED hardware. The logical states $\ket{0_\text{L}}$ and $\ket{1_\text{L}}$ are represented by the ground and second excited states, while the dominant relaxation errors can be detected via an ancilla qubit using a microwave-activated two-qutrit SWAP gate. We demonstrate a logical qubit $T_1$ lifetime exceeding $500\,μ\mathrm{s}$, post-selected with repeated mid-circuit erasure detection, which is ten times longer than the $T_1$ time of the transmon physical qubit. Coherence times beyond $300\,μ\mathrm{s}$ are achieved using dynamical decoupling. Single-qubit gate operations reach average Clifford gate infidelity on the order of $10^{-4}$. We further demonstrate dual-purposing an ancilla qubit for both erasure detection and parity checking, showing heralded generation of Bell states between erasure qubits. These results suggest that mainstream architectures of transmon qubit arrays may already be capable of implementing erasure-based QEC strategies for hardware-efficient fault-tolerant quantum computing.

quant-ph↗

arXiv2026

Dynamical error reshaping for dual-rail erasure qubits

Erasure qubits -- qubits designed to have an error profile that is dominated by detectable leakage errors -- are a promising way to cut down the resources needed for quantum error correction. There have been several recent experiments demonstrating erasure qubits in superconducting quantum processors, most notably the dual-rail qubit defined by the one-photon subspace of two coupled cavities. An outstanding challenge is that the ancillary transmons needed to facilitate erasure checks and two-qubit gates introduce a substantial amount of noise, limiting the benefits of working with erasure-biased qubits. Here, we show how to suppress the adverse effects of transmon-induced noise while performing erasure checks or two-qubit gates. We present control schemes for these operations that suppress erasure check errors by three orders of magnitude and reduce the logical two-qubit gate infidelities by up to three orders of magnitude.

quant-ph↗

arXiv2026

Fold-transversal surface code cultivation

Magic state cultivation is a state-of-the-art protocol to prepare ultra-high fidelity non-Clifford resource states for universal quantum computation. It offers a significant reduction in spacetime overhead compared to traditional magic state distillation techniques. Cultivation protocols involve measuring a transversal logical Clifford operator on an initial small-distance code and then rapidly growing to a larger-distance code. In this work, we present a new cultivation scheme in which we measure the fold-transversal Hadamard of the unrotated surface code, and leverage unitary techniques to grow within the surface code family. Using both stabilizer and state vector simulations we find that this approach achieves the lowest known spacetime overhead for magic state cultivation. Practical implementation of our protocol is best suited to architectures with non-local connectivity, showing the strength of architectures where such connectivity is readily available.

quant-ph↗

arXiv2025

Unraveling the switching dynamics in a quantum double-well potential

The spontaneous switching of a quantum particle between the wells of a double-well potential is a phenomenon of general interest to physics and chemistry. It was broadly believed that the switching rate decreases steadily with the size of the energy barrier. This view was challenged by a recent experiment on a driven superconducting Kerr nonlinear oscillator (often called the Kerr-cat qubit or the Kerr parametric oscillator), whose energy barrier can be increased by ramping up the drive. Remarkably, as the drive amplitude increases, the switching rate exhibits a step-like decrease termed the "staircase". The view challenged by the experiment demands a deep review of our understanding of quantum effects in double wells. In this work, we derive a semi-analytical formula for the switching rate that resolves a continuous transition between tunneling- and dissipation-dominated dynamics. These two dynamics are observed respectively in the flat and the steep parts of each step in the staircase. Our formula exposes two distinct dissipative processes that limit tunneling: dephasing and decay. This allows us to predict the critical drive amplitudes where steps occur. In addition, we show that in the regime of a few states in the well and under moderate to low temperatures, highly excited states are populated predominantly via cascaded and direct thermal heating rather than quantum heating. At very low temperatures, however, the perturbation induced by the nonhermitian Hamiltonian becomes important and facilitates a new form of quantum heating. We numerically map the activation mechanism as a function of drive amplitude, damping rate, and temperature. Our theory deepens the understanding of switching dynamics between metastable quantum states, highlights the importance of a general interplay between tunneling and dissipation, and identifies a novel quantum regime in activated transitions.

quant-ph↗

arXiv2025

Minimum-Weight Parity Factor Decoder for Quantum Error Correction

Fast and accurate quantum error correction (QEC) decoding is crucial for scalable fault-tolerant quantum computation. Most-Likely-Error (MLE) decoding, while being near-optimal, is intractable on general quantum Low-Density Parity-Check (qLDPC) codes and typically relies on approximation and heuristics. We propose HyperBlossom, a unified framework that formulates MLE decoding as a Minimum-Weight Parity Factor (MWPF) problem and generalizes the blossom algorithm to hypergraphs via a similar primal-dual linear programming model with certifiable proximity bounds. HyperBlossom unifies all the existing graph-based decoders like (Hypergraph) Union-Find decoders and Minimum-Weight Perfect Matching (MWPM) decoder, thus bridging the gap between heuristic and certifying decoders. We implement HyperBlossom in software, namely Hyperion. Hyperion achieves a 4.8x lower logical error rate compared to the MWPM decoder on the distance-11 surface code and 1.6x lower logical error rate compared to a fine-tuned BPOSD decoder on the $[[90, 8, 10]]$ bivariate bicycle code under code-capacity noise. It also achieves an almost-linear average runtime scaling on both the surface code and the color code, with numerical results up to sufficiently large code distances of 99 and 31 for code-capacity noise and circuit-level noise, respectively.

quant-ph↗

arXiv2025

Fault-tolerant Fusion-based Quantum Computing with the Four-legged Cat Code

The four-legged cat code is a quantum error-correcting code designed to address the predominant error in bosonic modes: single-photon loss. It was the first such code to surpass the break-even point, thereby demonstrating the practical utility of quantum error correction. In this work, we propose a planar fault-tolerant architecture for this code by concatenating it with the XZZX code via fusion-based error-correction. To the best of our knowledge, this is the first 2D nearest-neighbor architecture for fault-tolerant fusion-based error-correction. We demonstrate how all the required operations, namely resource state preparation and Bell measurements, can be carried out using standard circuit-QED techniques, such as intercavity beam-splitter coupling, cavity displacements, cavity-transmon dispersive coupling, and transmon drives. We show analytically and numerically that all dominant hardware errors in the bosonic modes and control ancillae are corrected, to first-order, at the hardware level. Consequently, the outer XZZX code only needs to address smaller residual errors, which are quadratically suppressed, effectively doubling the architecture's fault-distance. Moreover, the performance of our architecture is not limited by unwanted nonlinearities such as cavity self-Kerr, and it avoids demanding coupling techniques like $χ$-matching or high-order coupling. Overall, our architecture substantially reduces the hardware complexity needed to achieve fault tolerance with the four-legged cat code.

quant-ph↗

arXiv2025

Taming coherent noise with teleportation

Compared to the more widely studied Pauli errors, coherent errors present several new challenges in quantum computing and quantum error correction (QEC). For example, coherent errors may interfere constructively over a long circuit and significantly increase the overall failure rate compared to Pauli noise. Additionally, there is so far no analytical proof for a topological code threshold under coherent errors. Moreover, it is hard to even numerically estimate the performance of QEC under coherent errors as their effect in a Clifford circuit cannot be efficiently classically simulated. In this work, we demonstrate that teleportation effectively tailors coherent errors into Pauli errors, for which analytical and numerical results are abundant. We first show that repeated teleportation of a single qubit decoheres errors, and the average infidelity grows at worst linearly with the number of teleportations, similar to Pauli errors. We then analyze a physically motivated pure $Z$-coherent error model for teleported CSS codes in which over-rotation errors accompany every gate, and find that such an error model is equivalent to a Pauli error model. Our result implies that the performance of a CSS code implemented via teleportation-based error correction or measurement-based error correction with such coherent noise can be efficiently simulated on a classical computer and has an analytically provable threshold. The intrinsic noise-tailoring property of teleportation may ultimately remove the need for randomized compiling in teleportation-based quantum computing schemes.

quant-ph↗

arXiv2025

Optomechanical resource for fault-tolerant quantum computing

Fusion-based quantum computing with dual-rail qubits is a leading candidate for scalable quantum computing using linear optics. This paradigm requires single photons which are entangled into small resource states before being fed into a fusion network. The most common sources for single optical photons and for small entangled states are probabilistic and heralded. The realization of a single reliable deterministic source requires many redundant probabilistic sources and a complex optical network for rerouting and retiming probabilistic outputs. In this work, we show how optomechanics enables reliable production of resources for photonic quantum computing without the redundancy of the all-optical approach. This is achieved by using acoustic modes as caches of quantum resources, ranging from single-particle states to small entangled states, with on-demand read-out. The advantages of acoustic modes as optical quantum memories, compared to other technologies, include their intrinsically long lifetimes and that they are solid state, highly tailorable, and insensitive to electromagnetic noise. We show how the resource states can be prepared directly in the acoustic modes using optical controls. This is still probabilistic and heralded, as in the all-optical approach, but the acoustic modes act as a quantum memory which is integrated into the production of the states. The quantum states may be deterministically transferred from acoustic modes to optical modes, on demand, with another optical drive.

quant-ph↗

arXiv2025

A Unitary Encoder for Surface Codes

The surface code is a promising candidate for fault-tolerant quantum computation and has been implemented in many quantum hardware platforms. In this work, we propose a new non-local unitary circuit to encode a surface code state based on a code conversion between rotated and regular surface codes, which halves the gate count of the fastest encoder known previously. While the unitary encoders can be used to increase the code distance, the fault-distance remains fixed. Nonetheless, they can be used for space-time efficient realization of eigenstates of the surface code operators that can't be easily accessed transversally such as the Pauli Y-eignestate and Clifford eigenstates. It may be expected that error propagation in the non-local circuit will make decoding more challenging compared to local unitary encoding circuits. However, we find this not to be the case and that conventional matching decoders can be effectively used. Furthermore, we perform numerical simulations to benchmark the performance of our encoder against a previous local unitary encoder and the conventional stabilizer-measurement based encoder for preparing the Pauli Y-eigenstate and find that our encoder can outperform these in experimentally relevant noise regimes. Therefore, our encoder provides practical advantage in platforms where non-local interactions are available such as neutral atoms and trapped ions.

quant-ph↗

arXiv2024

Faulty towers: recovering a functioning quantum random access memory in the presence of defective routers

Proposals for quantum random access memory (QRAM) generally have a binary-tree structure, and thus require hardware that is exponential in the depth of the QRAM. For solid-state based devices, a fabrication yield that is less than $100\%$ implies that certain addresses at the bottom of the tree become inaccessible if a router in the unique path to that address is faulty. We discuss how to recover a functioning QRAM in the presence of faulty routers. We present the \texttt{IterativeRepair} algorithm, which constructs QRAMs layer by layer until the desired depth is reached. This algorithm utilizes ancilla flag qubits which reroute queries to faulty routers. We present a classical algorithm \texttt{FlagQubitMinimization} that attempts to minimize the required number of such ancilla. For a router failure rate of $1\%$ and a QRAM of depth $n=13$, we expect that on average 430 addresses need repair: we require only 1.5 ancilla flag qubits on average to perform this rerouting.

quant-ph↗

arXiv2024

Quantum optomechanical control of long-lived bulk acoustic phonons

High-fidelity quantum optomechanical control of a mechanical oscillator requires the ability to perform efficient, low-noise operations on long-lived phononic excitations. Microfabricated high-overtone bulk acoustic wave resonators ($\mathrmμ$HBARs) have been shown to support high-frequency (> 10 GHz) mechanical modes with exceptionally long coherence times (> 1.5 ms), making them a compelling resource for quantum optomechanical experiments. In this paper, we demonstrate a new optomechanical system that permits quantum optomechanical control of individual high-coherence phonon modes supported by such $\mathrmμ$HBARs for the first time. We use this system to perform laser cooling of such ultra-massive (7.5 $\mathrmμ$g) high frequency (12.6 GHz) phonon modes from an occupation of ${\sim}$22 to fewer than 0.4 phonons, corresponding to laser-based ground-state cooling of the most massive mechanical object to date. Through these laser cooling experiments, no absorption-induced heating is observed, demonstrating the resilience of the $\mathrmμ$HBAR against parasitic heating. The unique features of such $\mathrmμ$HBARs make them promising as the basis for a new class of quantum optomechanical systems that offer enhanced robustness to decoherence, necessary for efficient, low-noise photon-phonon conversion.

quant-ph↗

arXiv2024

Quantum Approximate Optimization Algorithm with Cat Qubits

The Quantum Approximate Optimization Algorithm (QAOA) -- one of the leading algorithms for applications on intermediate-scale quantum processors -- is designed to provide approximate solutions to combinatorial optimization problems with shallow quantum circuits. Here, we study QAOA implementations with cat qubits, using coherent states with opposite amplitudes. The dominant noise mechanism, i.e., photon losses, results in $Z$-biased noise with this encoding. We consider in particular an implementation with Kerr resonators. We numerically simulate solving MaxCut problems using QAOA with cat qubits by simulating the required gates sequence acting on the Kerr non-linear resonators, and compare to the case of standard qubits, encoded in ideal two-level systems, in the presence of single-photon loss. Our results show that running QAOA with cat qubits increases the approximation ratio for random instances of MaxCut with respect to qubits encoded into two-level systems.

quant-ph↗

arXiv2024

Error correction of transversal CNOT gates for scalable surface code computation

Recent experimental advances have made it possible to implement logical multi-qubit transversal gates on surface codes in a multitude of platforms. A transversal controlled-NOT (tCNOT) gate on two surface codes introduces correlated errors across the code blocks and thus requires modified decoding strategies compared to established methods of decoding surface code quantum memory (SCQM) or lattice surgery operations. In this work, we examine and benchmark the performance of three different decoding strategies for the tCNOT for scalable, fault-tolerant quantum computation. In particular, we present a low-complexity decoder based on minimum-weight perfect matching (MWPM) that achieves the same threshold as the SCQM MWPM decoder. We extend our analysis with a study of tailored decoding of a transversal teleportation circuit, along with a comparison between the performance of lattice surgery and transversal operations under Pauli and erasure noise models. Our investigation works towards systematic estimation of the cost of implementing large-scale quantum algorithms based on transversal gates in the surface code.

quant-ph↗

arXiv2024

Mitigating Temporal Fragility in the XY Surface Code

An important outstanding challenge that must be overcome in order to fully utilize the XY surface code for correcting biased Pauli noise is the phenomena of fragile temporal boundaries that arise during the standard logical state preparation and measurement protocols. To address this challenge we propose a new logical state preparation protocol based on locally entangling qubits into small Greenberger-Horne-Zeilinger-like states prior to making the stabilizer measurements that place them in the XY-code state. We prove that in this new procedure $O(\sqrt{n})$ high-rate errors along a single lattice boundary can cause a logical failure, leading to an almost quadratic reduction in the number of fault-configurations compared to the standard state-preparation approach. Moreover, the code becomes equivalent to a repetition code for high-rate errors, guaranteeing a 50% code-capacity threshold during state preparation for infinitely biased noise. With a simple matching decoder we confirm that our preparation protocol outperforms the standard one in terms of both threshold and logical error rate in the fault-tolerant regime where measurements are unreliable and at experimentally realistic biases. We also discuss how our state-preparation protocol can be inverted for similar fragile-boundary-mitigated logical-state measurement.

quant-ph↗